Using a Slider to adjust time ?

Is there a way to use a Slider for a timefield ? Entering a lot of times is a pain....

Hi manchmal2,
using string formatting functions?
Message Edited by GerdW on 05-14-2009 11:03 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
formatting.vi ‏16 KB

Similar Messages

Why does the slider disappear every time I use it to move the window (Windows: FF 32.0)?

Why does the slider disappear every time I use it to move the window (Windows: FF 32.0)? How do I get the slider back?

Problem solved: I have been using Walnut for Firefox ver. 2.0.28 theme. For some reason this has been causing the problem. Started FF in Safe Mode, and the slider problem disappeared. Then proceeded to re-enable the Walnut theme: the problem reappeared. Disabled Walnut theme and reenabled all my other add-ons (about 6 of them). Still no problem. So, clearly there is a problem with the use of Walnut theme in FF ver. 32, at least on my Windows 7 installation.
Thanks for all your suggestions and help. Good job, all!

Using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds. i can't therefore have unmuted sounds and unlocked rotation at the same time??

using iPad 2 - if i use the slide switch to lock rotation, i cannot unlock rotation, unless i use it to mute sounds. i can't therefore have unmuted sounds and unlocked rotation at the same time??

Uh .... Yes you can. You just have to understand how the whole thing works.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

Scanjet G4050- How to scan multiple slides at one time with Image Capture

Using Scanjet G4050 with Mac and OS 10.6. Thus using Image Capture to control scanner. When using the slide template for 16 slides, Image Capture only allows me to select one slide at a time.
Is there a way to fill the template with 16 slides and have Image Capture scan all 16 slides without having to select each one in turn? It is a real pain to have to direct each scan.

Hi jpbear
I am going to take credit for finding the solution that the HP Photo Suite from OSX 5 works in subsequent Mac OSX. Look at this web page.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4019&lc=en&cc=us&dlc=en&sw_lang=&product=3236...
If this doesn't work for you, I am willing to guide you to finding the page. I downloaded a copy a few minutes ago and it was still available. The Photo Suite is actually an amazing set of applications but the one you want to use with your HP ScanJet G4050 is HP Scan Pro. I continue to use it with OSX 9 but other people have reported that it continues to work with OSX 10 as well. It allows me to scan the 16 slides on the bed individually with one pass. It also has some colour balancing function.
Frangelica

Can i play music and use mirroring function at same time from ipad2 to apple tv

can i play music and use mirroring function at same time from ipad2 to apple tv

Yes, any audio during the "mirroring" funtion will forward to the appletv. This includes all system audio, games, apps, ect. If you slide the mute botton the side of your ipad to mute then you can block app audio and just get Music audio or Pandora if you are using pandora.

HT1430 How can you reboot your Touch if the screen is frozen and will not allow you to use the "slide to power off"

How can I reboot my Touch when the screen is frozen and I cannot use the "slide to power off" feature?

Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why use layer masks and adjustment layers?

I've been using PSE and CS successfully for years.
One thing I have never understood is: why use layer masks and adjustment layers, instead of simply creating a copy of the subject layer (the one I want to make changes to) and experimenting with that? It's quick (Ctrl-J), I can do it as many times as I want, I'm not affecting my Background layer. If I like the changes, I can keep them. I can switch the copy on and off to compare with the Background layer. I can do any type of blend or combination I desire. I can insert Gradient layer(s), select any part of the copy and (Ctrl-J) create a new layer containing only the selected part. I can adjust size, rotate, do anything.
It almost seems that "layer mask" and "adjustment layer" are mainly another layer of terminology; can anyone explain (preferably in 50 words or less) how they are intrinsically different from or superior to working with copies of the Background layer? What can be done with them that can't be done simply using copies of the Background layer?

Here's a very basic example of the advantage of using a layer mask.
I have this picture of a sunflower and I want to convert the background to black & white, leaving just the flower in color. I duplicated the Background layer, converted it to B&W and proceeded to use the Eraser to uncover the flower color. But I made a mistake and erased outside the flower. There is no way to correct this other than deleting the layer and starting again.
Now let's use a layer mask on the B&W layer. Set the Foreground/Background colors to the defaults black/white. Using the Brush tool paint on the mask with black to reveal the color. Here I painted too far, revealing a green leaf in the background. No need to start over. Simply switch to white and paint the excess to convert back to the B&W.
Tip: while painting you can type "X" to toggle between black and white.
You could also select the flower using the various selection tools and then fill the selection with black. If it turns out the selection was not 100% accurate you can then fine-tune the result by painting on the mask with black or white as necessary.

IPhoto and Frontrow: can not click and drag after using frontrow slide show

Recently I received my new MacBook Pro, I started using iPhoto and noticed the following problem:
1. Open iPhoto and perform normal tasks, click and drag photos, etc.
2. Close i-Photo
3. Open Frontrow Slide Show(Pictures)- play for a few seconds
4. Close Frontrow
5. Reopen i-Photo and photos will not move(click/drag)
6. Close i-Photo/reopen and all is fine
Anyone else???
Thanks!
MacBook Pro Mac OS X (10.4.9)

I discover that there is no parameter to set slide duration
Using the Finder, drag all the images from the folder containing the images on to the Navigator pane ion Keynote, this will place the images centred on an individual slide
with at least one image selected in the Navigator, select all, (command A)
Inspector > Animate > Start transition: in the drop down menu, select: Automatically
seethe delay to the time you want the image to appear on screen, you can select individual times by selecting one slide at a time
and no choice of slide transition and timing
Inspector > Animate, click Add an Effect
The Inspector is the side panel on the right hand side of the canvas
All Apple applications have a very useful Help system located on the Menu bar > Help

Cannot adjust time as user, no printing either in KDE, arch 32 bit

Hi,
I installed ntp, and tried to adjust time as it is aways wrong.
Down South here in Oz it lookks liike we are in Canada or Europe!
It asks for root password to auto update it from a time server,
but says it is not system policy and then refuses to let one do so even once as root
It states there is something wrong with the dbus backend.
Perhaps a root login may be able to fix it but perhaps not too
There is no printing in kde, the config complains of orpan modules and old third pary modules lying around and blames the last upgrade.
Guess I 'll have to go to cups printing and hope cups is OK.
Guess these are bugs and a wonky kde control module and/or dbus and they may have been reported already,
Regardz
El Zorro
Last edited by elzorro (2012-01-09 23:26:37)

Thanks for you interest Yurlungur,
Somehow I managed to fix ntp, it now updates with ntp and an ntp timeserver, so now I am going to try printing via cups printing on the web due to the bad state of the KDE control panel in Arch.
By the way before your post I upgraded dbus, but the control panel is the problem I am sure, as this did not help.
May I ask what desktop you use
Yurlungur wrote:
Hi El Zorro,
I don't use KDE so I can't help you there, but I can try and help with ntp. This is sort of an obvious question, and if you've already done this, please ignore me, but have you tried debugging dbus? Is it running properly (as far as I know, it's pretty plug-n-play, but maybe you need an update, or the daemon isn't running right)? KDE may have a front end for ntp, but there's no reason ntp shouldn't be completely controllable by the command line... and if it's not, there's probably a dependancy problem. Just for kicks, can you post the daemons line of /etc/rc.conf and the entire contents of /etc/ntp.conf?
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# LANG in /etc/locale.conf takes precedence
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="yes"
HARDWARECLOCK="localtime"
TIMEZONE="Australia/Sydney"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
ntp.conf
# With the default settings below, ntpd will only synchronize your clock.
# For details, see:
# - the ntp.conf man page
# - http://support.ntp.org/bin/view/Support/GettingStarted
# - https://wiki.archlinux.org/index.php/Ne … col_daemon
# Select three geolocalized NTP public servers; see http://www.pool.ntp.org/
server 0.pool.ntp.org
server 1.pool.ntp.org
server 2.pool.ntp.org
# Only allow read-only access from localhost
restrict default nomodify nopeer
restrict 127.0.0.1
restrict ::1
# Location of drift and log files
driftfile /var/lib/ntp/ntp.drift
logfile /var/log/ntp.log
# NOTE: If you run dhcpcd and have lines like 'restrict' and 'fudge' appearing
# here, be sure to add '-Y -N' to the dhcpcd_ethX variables in /etc/conf.d/net

Cs4 and w7 use default masks on adjustament doesn't work

Hi
i installed cs4 on a fresh install of w7
and use default masks on adjustament doesn't work
enabled or disabled ,every time i add an adjustamen layer ,photoshop add a blanck white mask
thanks
is there a cure?

wrong look the screenshot
i resized the screenshots

Any way to show more than two slides at a time on the secondary display?

During a presentation, is there any way to show more than two slides at a time in the secondary display? Sometimes during a presentation i have to go back to a certain slide without notice (usually no more than ten slides behind or in front of the current slide)
Thanks in advanced...

Nope. But you can jump around easily enough. Just type in the number of the slide you want (or any number, really, because you can then use the arrow keys to scroll to the correct slide), and hit return.

Using NIKON Slide/film scanner

I have found no suitable place to find answers to my questions about using a NIKON FIlm scanner to obtain digital photos.. Perhaps someone might make a useful suggestion??
I have had a NIKON SF-210 slide/film scanner now for a couple or three years. However, I only started using it heavily last Fall (2008) to scan my large archive of old family slides. Unfortunately, as time has passed, the software has become more and more unstable causing me to have to restart the whole process after scanning only a small number of slides. Sometimes, it will not scan even one slide before crashing. I read somewhere that this behavior may be due to the upgrades in Mac software. I've done, repeatedly, all of the usual things that I can think of like reloading the software, etc.
I can't get a response concerning this problem from anyone at NIKON and they don't have any Mac version upgrades to the scanner software on their web sites, and haven't for some time, perhaps a couple or three years. Does NIKON still support Mac products??
Can anyone tell me how to solve or to find the solution to this problem?
Thanks, Gramp

I am using the Nikon Coolscan V (LS-50ED) USB connection with:
intel MBP 15" (2.8Ghz)
OSX 10.6.2. (Snow Leopard)
I am just using the standard (on disc) Nikon Software upgraded to version 4.0.2 via internet. The app says it is a *Application (PowerPC)* under the info section, so I assume that it is running on Rosetta. (the Genious did my upgrade to 10.6 so I don't know if he installed Rosetta or not, but I assume so.)
Everything seems to be working fine (as this is my first experience with scanning slides and color correction). Was a synch to set up. I am not the Ace though. I have only been using the slide scanner and not the film scanner yet (though I am soon to try).
FYI there is a flickr group of nikon scanner users. I found some of them helpful too.
http://www.flickr.com/groups/74221125@N00
In particular I found this thread useful:
http://www.flickr.com/groups/74221125@N00/discuss/72157613737155159

Selecting for use with slide tool

Got FCE on Friday and decided to work through the manual (in the apparent absence of any video tutorials), got to the section about using the slide tool and am starting to scratch my head.
Can use the slide tool to grab and slide clips but am now trying to do so using numerical edits. The manual (page 486) says:
+If you need to slide a clip just two or three frames, using the mouse may be difficult. For precision edits, it is much less cumbersome to slide a clip numerically.To slide a clip in the Timeline using timecode:+
+1Select the Slide tool in the Tool palette (or press the S key twice).+
+2Select a clip in the Timeline, or hold down the Shift key to select multiple clips. You can also select noncontiguous clips using the Command key.+
I'm actually struggling to select a clip, if I click on a clip with the slide tool it's momentarily highlighted with a coloured outline but when I let go it doesn't stay selected, I can shift click on the clip and it will get selected but the timecode doesn't appear at the top of the time line window.
I feel a bit daft asking this, but after 20 minutes trying all sorts of things I'd rather look daft than waste anymore time. Anyone know what I'm doing wrong.

OK forget it, got it, sorry about that.

Iphone 4 screen not responding. not able to use the slider to unlock the phone

Hi,
I have a iphone 4 which was purchased in the UK 2 yrs back. I use this phone in india. Since today morning the screen has become unresponsive and i am not able to use the slider to unlock the screen to be able to make or recieve calls or perform any other fuction on my phone. I spoke to apple customer care in india about this problem and they suggested to try restoring the phone which didnt work out. Now they say that I will have to get this repaired in the UK since apple doesnt have apple stores and service centers in India. I think it is some hardware issue. I am not in a position to send it back to UK since i dont have any friends or relatives there in the UK nor i am traveling to the UK at this point in time. Pls help me out and suggest how can i get my phone replaced in India.
Regards,
Rajat

Then go to Settings/General/Accessibility and turn Zoom to OFF.

I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive.

iPad 3 touch screen non responsive. How can I fix this?
I'm trying to use the slide to unlock bar but the iPad 3 touch screen is non responsive. How can I fix this!

I tried that step but it would not work. I think I may have changed a setting.
I was able to highlight a function but had to tap 3 times to get it to respond
to the command. I think it's some type of Restriction or Accessibility settings.
Any suggestions?

Using a Slider to adjust time ?

Similar Messages

Maybe you are looking for