Using a Sonnox Audio Plugin (Compressor) I can't set the parameters

If I put a Sonnox Plugin (Oxford Dynamics) on a clip I cannot modify the parameters of the plug... indeed, I can, but if I play the clip again all the parameters are reset. I tried also with automation but I get same result...

Please see the following which includes links to
and extension ("Stylish"), a style, usage notes, and picture links
* https://support.mozilla.com/questions/863595
Once Stylish is installed there are tens of thousands of styles which are smaller than extensions. The style included above is only one of them.

Similar Messages

How can I set the parameters of global channels and tasks previously created inside my application?

Hi everyone !
Before proceeding to the description below I think it´s important to say that I´m using NI USB-6008 as DAQ device and the driver used is DAQmx 7.5.
I´m currently developing an application into which I intend to be able to have complete control of the DAQ device being used, i.e, I´ll be able to create, delete and change the configuration of global channels and tasks previously created, among other things.
To achieve the ends specified above I´ve already developed two vis, one to create global channels and the other to create tasks, and these two are doing a fine job. After this, I thought I came to the easy part ... I think I couldn´t be far for the truth! I thought that everything I should do was to specify which channel or task I´d like to configure and then use a property node to get the results I wanted, but it´s not working ...there are some DAQmx property nodes I thought I could use to do it but I didn´t find a way to change the configuration of the global channels, and none of these property nodes seemed to work, i.e, although the simple vis used to test them ran the chosen parameters didn´t alter at all, after each execution I used MAX to see if they had changed, and to my chagrin they hadn´t.
Can anybody lend me a hand with this problem? As always, any help would be deeply appreciated !

Hi Giovani,
There is a developer zone tutorial that discussus some advanced data acquisition features including programmatic saves of NI-DAQmx tasks, global channels, and scales. This tutorial also includes an example program.
I wrote a short program that creates tasks in MAX. Whenever I wanted to change a part of the task, I would just change that feature in the example program. Take a look at the examples and please let me know if you have any further questions.
Regards,
Hal L.
Attachments:
create task example.vi ‏33 KB

Ipad shows all regular Iphone inbound calls as Facetime. I only want true FT calls to appear. I switch audio/video and it still happens. How can I set the Ipad to only register true facetime calls rather than all inbound regular calls? thanks

My Ipad will show all regular inbound calls, from Iphone, as Facetime calls. I would like only TRUE facetime calls to appear. I have switched audio/video on Ipad but it still happens. How can I set the Ipad to only register only true FT calls rather than all inbound calls that a re not facetime calls? Yes, you may have to reread this twice and slowly to understand..... Thanks!

Hi webn,
I understand that you do not wish to see phone calls on your iPad anymore. I have an article for you with some information on accomplishing this goal:
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
https://support.apple.com/en-us/HT6337
Turn off iPhone cellular calls
To turn off iPhone cellular calls on your iPad or iPod touch, go to Settings > FaceTime and turn off iPhone Cellular Calls.
On your Mac, open the FaceTime app and go to FaceTime > Preferences. Click Settings and deselect the iPhone Cellular Calls option.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

My macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

my macbook wont allow me to use the same hotmail address as i used on my other computers. How can I keep the same email and log into it on a macbook?

That indicates a hardware failure. Read here:
http://support.apple.com/kb/ts1559
If nothing works, you most likely have a hardware failure. Make an appointment at an Apple store to confirm.

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..

Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

Can we set the dynamic data source when using getReportParameters() ?

Hello!
I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
Regards,
Stephanie

report_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
This should load the saved report identified by report_id and you can get rid of javascript
Regards,
Vishal
http://obiee-oracledb.blogspot.com
http://www.packtpub.com/oracle-apex-4-2-reporting/book
Kindly mark the reply as helpful/correct if it solves your problem

I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

HT204406 Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process

Itunes Match won't upload. I get error stating there was an error in the itunes store, please try again. I have tried again everyday for the last month and am still unable to use. Any ideas on why Match can't complete the 1st step of the process (Gathering information about your Itunes library)?

JohnCullison wrote:
For the last few weeks, the iTunes store has been displayed with empty graphic rectangles (with a blue box containing a white question mark centered in the rectangles), bits of text, and some buttons. The page extends quite a ways, including what I assume would be all the links to all the music...
If all you are trying to do is buy music, you can easily buy MP3s at any online music download store (e.g. amazon.com) and add them to your iTunes library.

When using large text my lines overpal, how can I increase the line spacing?

When using large text my lines overpal, how can I increase the line spacing?

Press 'Ctrl + Enter' after the numbered item to insert blank space below it. If you press 'Enter', the next line will start with the next number. As long as you want to type lines without a numbering, press 'Ctrl + Enter' and type the line.

I am using iphone 5s, glass got broked, where can i get the original panel and what would be price

i am using iphone 5s, glass got broked, where can i get the original panel and what would be price

If you are from India ,here is how you get Out of Warranty service in India
Out-of-Warranty Service
Please contact an iPhone Authorized Service Provider for out-of-warranty service options.

HT3486 My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right. I've download several but it always give me the same message: Airport uti....can't be installed... The version of OS X on this version is not

My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
doesn't support this base station...
I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
Thank's for your help,
Mike

Use AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

Please clarify your version of Photoshop.
There is no CC6.
There is
Photoshop CS6
Photoshop CC
Photoshop CC 2014
Also, what is your operating system?

HT1918 Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e

Created an apple I'd using a wrong e-mail address. Can't access the e-mail to varify the Apple ID in order to be able to change the account settings. Any idea how can change the account information without having to varify the account through the e-mail?

You are trying to find a loophole to circumvent a basic rule that prohibits the transfer of purchased content from one Apple ID to another.
Content tied to an Apple ID are bound to that Apple ID forever. You can not merge or trade accounts. Well, not (officially) anyway...

Using a Sonnox Audio Plugin (Compressor) I can't set the parameters

Similar Messages

Maybe you are looking for