Using a specific colour

I want to replace one colour in an image with another specific one which I have the Hex code for. How do I do that? Thanks!

No one has come across this problem before?
Regards,
Andi

Similar Messages

Is there a way to use specific colours on gradient noise?

Hi,
I am hoping to make a radial gradient noise effect, but I would like to select the specific colours on the effect. I see that when you go to the gradient-maker tool and switch it to the noise option, there is no option to select the specific colours. Is there a different way to achieve this desired effect?
Basically, I would like to make circular lines of colour from a specific colour set.
Thanks!

Hi again,
Thanks again for your help. For example, I am starting with an image like this created in photoshop:
Next, I will take indexed colours from this (probably 50 of them), and want to make an image like this but with only the 50 colours indexed:
So in the end you get a "colour pie chart" like this:
Anyway it sounds like there is not an automatic way to do this? Otherwise I will just overlay a template with the slices and manually fill in the colours--- but as there are many photographs in my project I was just hoping to find a quicker way to achieve this or something similar.
If you have any further tips, let me know. Otherwise, thanks again for your input until now!

Is there a way where you can get Siri to use a specific email account to send messages?

I have multiple mail accounts (three) on my phone - work, personal (gmail), and one that's affiliated with a volunteer group. I set them up in that order. When I last sent new message using Siri, it defaulted to use my gmail account. I can't seem to figure out the command to get Siri to use a specific account. Does anyone know how to do this?

I don't know enough about Siri yet, but I would imagine that it links to the email account listed as "Default Account" toward the bottom of the Mail Settings options (Settings -> Mail, Contacts, Calendars -> Default Account).
If true, to link Siri with a different account, you would have to switch the default email account.
Give it a try and let me know if that works?
H

How can you determine which pages are using a specific symbol?

I want to find all the pages that are using a specific symbol, but I don't know how. I can't simply switch symbols because some have specific text & want to switch them with more generic smart buttons. I'll have to find every instance to update the text.
thanks!

me too, my file has 39 pages with many unuse symbols, now I want to delete those unuse.
I found that after deleteing those unuse in Page 1, actually they are being used in other page,
I can't find the way to delete them all at one time for all pages.
and I am using CS3

Using Country Specific Chart of Account in addition to Operational COA

Dear Team
We are implementing 16 company codes with Group COA A002 and
Operational COA A001 across all companies. Out of 16 Company codes 4
company codes already went live and running successfully. We are also
using one controlling area and operating concern for all company codes.
Out of 16 company codes there are 2 company codes from Turkey and
requires Turkey Country specific COA to be used mandatorily. But we
would like use same COA A001 for Turkey company codes in order to use
one Controlling Area across group which is not fulfilling the legal
requirement of the Turkey. We would like to use Country specific COA in
addition to the Operational COA and the same will be assigned to the
Company code in OB62.
In this case we need to create GL Accounts under Turkey COA and assign
the same in the Operational COA as alternate Account no.
In this case can we meet all the Turkey country specific legal
requirements as given below through Alternate GL Accounts No?Turkey Legal Requirements:
1.Country Specific GL account numbering
2.Reflection accounting
    - Monthly Closing for Expenses Accounts
    - Yearly closing for Expenses and Balance Sheet accounts
3.Inflation Accounting- Presently not using
4.Country Specific Reporting
5.Bank accounting- Bills if Exchange
6.Print out of Transactions in Turkish language
7.Cost of Sales statement
8.Document Journal
9.Taxes on Sales & Purchases
Please help in this regard.
Thanks in advance
Ravi Nalluri

Hi,
1. Create country COA in OB13
2. Assign it to your company code in OB62
3. Create GL accounts in your country COA
4. Assign country GL account to your operating COA gl account(FS00 > Control data > Alternative account no.)
5. System doesn't allow you to assign country COA gl if already has the balance
     So, change message settings accordingly in OBA5
6. You can see financials from your country COA also as F.01 & F.08(Select Alternative Account Number)
Rgds
Murali. N

Using adapter specific message attributes in SOAP adapter configuration

Hi,
Can you please let me know how to use adapter specific message attributes in receiver and sender SOAP adapter configuration. If possible , with example.

See here:
Adapter-Specific Message Attributes in the Message Header
http://help.sap.com/saphelp_nw04/helpdata/en/43/0a7d1be4e622f3e10000000a1553f7/frameset.htm
Sender Soap Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/frameset.htm
Receiver Soap Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm

SOAP Use Adapter-Specific Message Properties and Variable Transport Binding

Hi Friends,
   I am new to use to Soap Adapter. Please help me out bellow doubts.
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
   2. Where exactly we r using below parameters.
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Thanks&Regards
G.Bhanuprakash

Hi,
   1.When you use Use Adapter-Specific Message Properties and Variable Transport Binding .
SAP Help says both are needed to be checked when you want to process adapter attributes
Configuring the Receiver SOAP Adapter - SAP NetWeaver Exchange Infrastructure - SAP Library
These attributes can be get/set using dynamic configuration and their technical names are what you have pasted:
Remote User : (technical name: SRemoteUser )
Remote Host : (technical name: SRemoteHost )
SOAP Action (technical name: SHeaderSOAPACTION )
To transfer further header fields, set the relevant indicator. You can then store the following attributes and their values in the XI message header:
Variable Header : (technical name: XHeaderName1 )
Variable Header : (technical name: XHeaderName2 )
Variable Header : (technical name: XHeaderName3 )
Remote User - the username used to send a message to the adapter engine using SOAP
Remote Host - hostname which the remote user used
SOAP Action - SOAP Action of the XI webservice (sender) / SOAP Action of the receiver webservice
Variable Headers are additional key-value pairs in the HTTP Header that could be accessed in the XI Header using dynamic configuration. The limit is only three though.
Regards,
Mark

How to set values in JMS Adapter using Adanced specific Message Attributes

Hi Frnds,
in my scenarios i have to add extra header information MQ Message,
using Adanced specific Message Attributes i defined 7 parameters(Transaction,Environment,shema......) all are type Interger.But i have to set values ( Transaction type,Enviroment,shema....).
Where i can set values ??
help me on this...
Regards,
Raja Sekhar

Hi Vijay,
Thanks for your replay,as per your input i creted dynamic configuration method,
i taget structure luks like this
   <Data>
       <Mesage>
             <gl_update>
                  <header>
                        <ean1>
                        <ean2>
                  </header>
              <gl_update>
       <Message>
i written UDF and mapped to header element gl_update,
but i am getting below error message in MONI
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_ ffjms_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_jms_ _a</SAP:P3>
<SAP:P4>sync_out/Data/Message/ GLUpdate. Values missi~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_ ffjms_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_jms_ asyncout/Data/Message/ GLUpdate. Values missi~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
i want to know i mapped to UDF to GL_Update is is correct, to which element i have to map.
i think there is no prob with UDF,its executing ,giving warning messages
help me on this,
Regaards
Raj

How to identify reports that are using a specific universe object?

Any idea how to use BO Auditor or Metadata Manager to identify webi reports that are using a specific universe object or universe prompt in the report SQL?

Hi Samuel,
In case you are using BOXIR2 you can do this by editing the crystalenterprise.webi.xml file.
Replace the CrystalEnterprise.Webi.xml file (Take a backup) with the edited one.
Path where you can find this file- Tomcat/webapps/businessobjects/enterprise115/desktoplaunch/WEB-INF/classes/META-INF/CrystalEnterprise.Webapps/ePortfolio/plugins
Paste the Custom Documentation folder in Tomcat\webapps\businessobjects\enterprise115\desktoplaunch\
May I know your email Id so that I can send you the edited crystalenterprise.webi.xml file.
Regards,
Sarbhjeet Kaur

Using Adapter-specific attributes in Mail adapter

Hi,
I try to use adapter-specific attributes in my Mail adapter. I set the "Use Adapter-Specific Message Attributes" indicator, but I do not get a result in the mapping and also in the SXMB_MONI the attributes are not visible.
The documentation also refers to Variable Transport Binding indicator:<a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm</a>
Could this be the problem? I cannot find this indiciator! Does anyone know where I can find this indicator?
Regards,
Torsten

Hi,
The values for the parameters, set using adapter specific message attributes are available at runtime in the path http://sap.com/xi/XI/System/Mail.
We need to write UDF's that can extract the values from this path.
For Ex:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters() .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create(
    http://sap.com/xi/XI/System/File,
    FileName);
String valueOld = conf.get(key);
if (valueOld != null) {
    String valueNew = valueOld.replaceAll(input,output);
    conf.put(key, valueNew);
If you check Dynamic configuration in sxmb_moni, you would be able to find the values for all the attributes that have been set in the adapter.
Regards,
Smitha.

Stored Procedure for Blocking from using a Specific Warehouse in any transaction

Hi,
Is it possible to write a SP from using a Specific Warehouse in any transaction ?

Hi,
Try this SP for sales order. Change 01 to your warehouse code
IF @transaction_type in ('A','U') AND (@OBJECT_TYPE='17')
BEGIN
IF exists (SELECT t1.docentry FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry WHERE T1.[WhsCode] = '01' and
t0.docentry = @list_of_cols_val_tab_del )
Begin
SET @error = 123
SET @error_message = 'Check warehouse code'
End
End
Thanks & Regards,
Nagarajan

What is use of inverte colour in iphone

what is use of inverte colour in iphone

This is meant to help color-blind people....if you're not it's useless

Help! How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?

I am a new Indesign user and I have been working with GIMP for the last year creating single colour print-ready PDFs. But now I need to create a document with a FOGRA27 CMYK colour profile and a resolution of at least
How do I create a document with an imported PDF in 300dpi using a FOGRA27 colour profile?
I can import the PDF by creating a new document and finding the PDF in places, but it's bad quality.
The only colour profile I can find under View - Proof Setup is FOGRA39, but I need FOGRA27!
Help help help, I need to get these files printed in two days!
Thanks so much..
xx

Proof Colors doesn't change the file's color management, it just lets you see what the color values would look like if they are printed unchanged on different output devices. If you want to actually convert the color from one CMYK space to another, it's probably better to do that in Acrobat—Tools>Print Production>Convert Colors.
There's very little difference between Fogra27 and Fogra39—Fogra27 allows more total ink 350 vs. 330.
There's nothing you can do to improve the quality of low res images

Unable to open newly created files using a specific font.

Hello everyone!
All of a sudden, I am not able to open newly created files in Acrobat Pro 9.0 that use a specific font. It seems to be localized to files that are created in Microsoft Words, as I tried to create a document in Pages and was able to open that PDF (using the same font) in Acrobat. I'm not sure what to do at this point...Any ideas?

Hi,
If you have recently upgraded to Mac OS X 10.6.7, then have a look here:http://forums.adobe.com/message/3593533#3593533, where Steve Werner had the solution.
Niall

How to determine which locale uses the specific process

Hi,
I would like to get to know which locale uses the specific process.
I mean that when the process starts it should use the current system locale.
Where I can check that information which locale are used by the running process?
I ask because I would like to make sure that for example when the locale are French or Japanese the process/deamon use the current locale.
Kind regards,
Daniel

VivaLaVida wrote:
Hi,
currently we are in the process of consolidating our databases. One of the neccessary steps is to figure out which user connects to the database at all. That's easy, we implemented a logon-trigger and log the collected information into a separate table.It could have been even easier by turning on the built-in audit feature.
If a user with objects (e.g. tables, views, procedures) exists - but this user never connects to the database - does that automatically mean that these objects are not used at all? No need to say that this is not true. But how can we figure out if a connected user has selected an object of this user?audit would be a good choice.
Our porblem is that we have alot of schemas in our database - but the developers don't know if this schema is not used by an application or not (sad but true).Not sure what developer will do with used/not used application.
To enable auditing would be one choice to figure out if an object was ever used or not. What's wrong in auditing ?
Even though audit may have a footprint on performance, that would probably be less costly than any custom solution.
Nicolas.

Using a specific colour

Similar Messages

Maybe you are looking for