Using a stored procedure for a sender jdbc adapter

Hi all,
The requirement is to use a stored procedure, for extracting data from a oracle database.
Is it possible to do this.
If yes, what should be the source structure in this case.
Please help with the exact soln.
Thanks!!
Younus

Hi,
Did you check the blog pointed by Aamir?
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
You will need to use Oracle Functions instead of Oracle Stored Procedures. Read thru the blog and the note pointed in the blog . Think it is quite a good example.
Regards
Bhavesh

Similar Messages

How to use Stored Procedure Call in Sender JDBC adapter

Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier

Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!

How to use a atore procedure in the sender Jdbc adapter

Hi Experts!
I am having a requirement to read multiple data from multiple tables from Oracle database at a time.
In sender side i am using JDBC Adapter. Here i want to know how can we use a store procedure to do this and can any one pls give a blog which guide me in design.
Thanks in advance,
Preethi.

Pleasae see this thread
Stored procedure in Sender JDBC Adapter
In space of select statement put
EXEC nameofstoredprocedure
and update statement
Put <TEST>

Variables or parameters in Sender JDBC Adapter.

Hi,
I have the following question:
Is there any way to use variables or parameters when specifying the WHERE clause of a SQL SELECT statement or when using a Store Procedure in a Sender JDBC Adapter? If so, can anyone give an example.
Thanks in advance.
Sebastian Pereira.

Hi Sebastian,
The links mentioned below will help you in this regard:
Using a stored procedure for a sender jdbc adapter
Stored Procedure in sender JDBC
JDBC Sender - Oracle Stored procedures
Reward with points if helpful
Regards
Sai Ganesh

Sender JDBC adapter : Update SQL Statement : stored procedure

Hi,
Can we use a stored procedure in the sender jdbc adapter in 'Update SQL Statement'.
The problem i am facing is like, we are selecting data from two tables in 'SQL statement for query' and then in 'Update SQL Statement' , we need to delete that data from these two tables.
Please let me know if it is possible.
Thanks,
Rohit

you can use a Stored procedure in the
Query SQL Statement
You have the following options:
· Specify a valid SQL SELECT statement to select the data to be sent from the specified database.
· Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
so have your whole select and update as part of this single Stored procedure

Sender JDBC Adapter Supports Stored Procedures????

Dear All,
I was trying to use the Sender JDBC adapter to call the Stored procedure in the Sender JDBC adapter is possible to do this???
I don't think Sender JDBC Adapter is supported to execute the Oracle Started Procedures. With my understanding only the Receiver JDBC Adapter will supported for the Stored Procedures using the message mapping Action = EXECUTE and Table = DBO.EmployeeMasterTable.
Please let me know how to achieve the below scenario.
My Scenario JDBC to RFC
Query SQL Statement:
select * from dbo.emp where flag = 'Insert' or flag = 'Update' or flag = 'Delete'
Update SQL Statement:
UPDATE dbo.emp SET flag = null WHERE flag IN ('Insert', 'Update');
DELETE dbo.emp WHERE flag = 'Delete';
In the my update statement I need to update few data flag with Insert , Update and need to delete the of the old records as mentioned above the query.
In the response mapping I am using the Action = INSERT and Table = emp.
Thanks,
Jane F.

Hi Jane,
>>My requirment is to select from the DB and update and delete needs to be done. How I need to call this stored procedure in Sender JDBC adapter.
An example of SP call is mentioned in the previous note Note 941317 - XI / PI JDBC Adapter: Known Problems / Incompatibilities
SP Code
          ---------- pkg1 ----------
CREATE PACKAGE pkg1 AS
TYPE numset_t IS TABLE OF NUMBER;
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED;
END pkg1;
CREATE PACKAGE BODY pkg1 AS
-- FUNCTION f1 returns a collection of elements (1,2,3,... x)
FUNCTION f1(x NUMBER) RETURN numset_t PIPELINED IS
BEGIN
    FOR i IN 1..x LOOP
      PIPE ROW(i);
    END LOOP;
    RETURN;
END;
END pkg1;
In sender channel mention
>> SELECT * FROM TABLE(pkg1.f1(5));
>>Is this need to be in the one stored procedure right. Can ou let me know how it should be handled in JDBC Adapter.
Yes it shoudl be a single SP. Mention a select statement as given in above example.
What is your Oracle version?
Regards
Suraj

How to use Stored Procedures in Sender JDBC Adapter.

Hi Experts,
 we are having a lot of legacy application which are on .Net. basicaly using MS SQL & stuff. As a Integration scenario we have to triggered some events from JDBC to XI. How can i do this. Secondly there are multiple tables from which i will be selecting a record & sending it to XI for further processing the Receiver Side we are having SAP system.
 How can i use a Stored procedure in XI Sender Adapter ?
 Can anybody tell me step by step how to get the XSD of Stored procudere & used in XI. ?
 I am new to XI. I have not yet configured any sceneario.
 Can anybody guide me step by step how to do this.
 I am only intersted in Sender Side configuration.
Regards,
Umesh

Hey,
check this in the JDBC Sender Adapter Configuration
Query SQL Statement -> Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs.
http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm
JDBC adapter
/people/saravanakumar.kuppusamy2/blog/2005/01/19/rdbms-system-integration-using-xi-30-jdbc-senderreceiver-adapter
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

Configuring sender jdbc adapter

Hi all,
I have a requirement in which i have to select certain data from Oracle table and send it to an IDOC via SAP XI.
Problem is the select can happen from several tables. For example:
SELECT col1,col2,col3 FROM <tablename>
The <tablename> has to be variable. I do not need to do any JOIN. At a time select will be only from a single table i.e. col1, col2, col3 will all belong to the same table. But the adapter should poll multiple tables.
One more requirement is that once a particular record from a particular table has been selected some UPDATE also need to be done on the same record.
Pls can anybody provide me with a proper solution.
This requirement is a bit urgent.
Thanks in advance.
Regards
Neetu

Neetu,
You need to have the Table name dynamic in the Sender JDBC adapter's Select Query . This is not possible
You can consider using a Reciver JDBC adapter for which you can have a look at this blog ,
/people/bhavesh.kantilal/blog/2006/07/03/jdbc-receiver-adapter--synchronous-select-150-step-by-step
Or, you need a Separate sender JDBC adapter for every table to be polled.
>>One more requirement is that once a particular record from a particular table has been selected some UPDATE also need to be done on the same record.
If you are using the Sender JDBC adapter, this would be simple using the UPDATE field of the Sender JDBC adapter .
If you are planning to use Receiver JDBC adapter, then You need a separate Send Step for this Update.
Better way to go would be to have separate sender JDBC adapters.
Regards,
Bhavesh

Stored procedure : how to call SP in sender JDBC adapter for mysql

HI friends ,
we have JDBC---->XI--
>SAP scenario. For some business requirement, we have to call STORED PROCEDURE , please let me know how to call SP in sender JDBC adapter for mysql .
Thanks
mojib

Hi Mojib,
Please create a sample stored procedure like this which contains select statement and in communication channel give
wite stored procedure name only to sql query statment and in update statement write <test>.
I am executing this stored procedure successfully.
Create Proc GetResultX As
Begin
Select * From TESTX
End
Execute statement for stored procedure is :
Exec GetResultX
Regards
Laxmi Bhushan Jha
Rewards point if found usful
I have given same answer to one of the same thread

Error while executing the stored procedure through sender JDBC adapter

Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Ramesh

hi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh

Stored procedure in Sender JDBC Adapter

Hi All,
My Scenrio goes like this ...
Stored Procedure(SQL Server) --- PI -
File
I need to write the results of stored procedure to File.Here I don't need any mapping.So how many DT , MT and MI need to be created?
The interface need to run by 6AM from Monday to Thrusday, how can i achieve this ?
Stored Procedure has only select statement and no Update statement , but it takes Date as Input parameter , so what i need to provide in sender JDBC adapter.
Thanks,
Monish

Hi Monish,
As per your requirement it is JDBC to File. Please be careful with the structure to be created for sender JDBC. I am unable to understand why you donot require a mapping for this. How XI will send the data to a file then.As per my knowledge if it's file to file and just pick and drop then we can neglect IR and go for ID.But here you are working with JDBC and File so you will be in need of it.
IR:
DT: 2
JDBC_Sender_DT
File_Output_DT(Optional)
You can use the JDBC sender data type structure for File output also.
MT as per your DT
MI:2
Outbound MI: JDBC structure
Inbound MI : File structure
MM: 1
IM: 1
ID as similar to other scenarios.All 1 objects for RD,ID,Sender Agreement and Receiver Agreement.
Sender JDBC channel:
Query: Select * from table where date
But I have a query how are you providing date in input paramerter.It will be dynamically entered into the query right.
You can mention the Avalibility planning for your interface to work in RWB.
Go to RWB>Component Monitoring>Adapter Engine->Communication Channel Monitoring>Avaliablity Planning
Please explain.
Regards,
Nutan

Error in calling stored procedure in sender JDBC adapter

Hi Experts,
I am working on MySQl to SAP scenario. I have to use stored procedure in sender JDBC adapter.
I am calling SP as fallows: execute proc_dtdc_booking_interface_sd
But it returned following error,
Database-level error reported by JDBC driver while executing statement 'execute proc_dtdc_booking_interface_sd'. The JDBC driver returned the following error message: 'java.sql.SQLException: Unknown prepared statement handler (proc_dtdc_booking_interface_sd) given to EXECUTE'. For details, contact your database server vendor.
the way i called SP is correct ??
please suggest me how to resolve the issue ??
Regards,
Bhuvan.

Hi
Below is the code , when we are using this code directly in the mySQl command promp, it fetches 10 record but when the same code is called through XI adapter its fetching only one record
DELIMITER $$
DROP PROCEDURE IF EXISTS `proc_dtdc_booking_interface_sd` $$
CREATE DEFINER=`root`@`localhost` PROCEDURE `proc_dtdc_booking_interface_sd`()
BEGIN
declare done int(1);
declare v_dsr_booked_by char(1) ;
declare v_dsr_branch_code char(3) ;
declare v_dsr_cust_code varchar(7) ;
declare v_dsr_booking_date date ;
declare v_dsr_cnno char(9) ;
declare v_dsr_cn_type char(3) ;
declare v_dsr_cn_weight decimal(8,3) ;
declare v_dsr_dest char(3) ;
declare v_dsr_mode char(2) ;
declare v_dsr_amt decimal(10,2) ;
declare v_dsr_dox char(1) ;
declare v_office_code char(3) ;
declare v_dsr_status char(1) ;
declare v_dsr_remarks varchar(25) ;
declare v_dsr_refno varchar(20) ;
declare v_dsr_transmf_no varchar(10) ;
declare v_dsr_trans_status_xi char(1) ;
declare v_ndsr_cnno char(9) ;
declare v_ndsr_product char(3) ;
declare v_ndsr_sercharge decimal(8,3) ;
declare v_ndsr_ins_amt decimal(8,3) ;
declare v_ndsr_others decimal(8,3) ;
declare v_dr_amt_type decimal(2,0) ;
declare v_dr_extra_amt decimal(10,2) ;
declare v_sales_document varchar(2) ;
declare bookcur CURSOR for
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
DECLARE CONTINUE HANDLER FOR NOT FOUND SET DONE=1;
set done=0;
OPEN bookcur;
bookloop: loop
FETCH bookcur
INTO
v_dsr_booked_by ,
v_dsr_branch_code,
v_dsr_cust_code,
v_dsr_booking_date,
v_dsr_cnno,
v_dsr_cn_type,
v_dsr_cn_weight,
v_dsr_dest,
v_dsr_mode,
v_dsr_amt,
v_dsr_dox,
v_office_code,
v_dsr_status,
v_dsr_remarks,
v_dsr_refno,
v_dsr_transmf_no,
v_dsr_trans_status_xi,
v_ndsr_cnno,
v_ndsr_product,
v_ndsr_sercharge,
v_ndsr_ins_amt,
v_ndsr_others,
v_dr_amt_type,
v_dr_extra_amt,
v_sales_document ;
IF DONE=1 THEN
LEAVE bookloop;
END IF;
select
v_dsr_booked_by As dsr_booked_by,
v_dsr_branch_code As dsr_branch_code,
v_dsr_cust_code As dsr_cust_code,
v_dsr_booking_date As dsr_booking_date,
v_dsr_cnno As dsr_cnno,
v_dsr_cn_type As dsr_cn_type,
v_dsr_cn_weight As dsr_cn_weight,
v_dsr_dest As dsr_dest,
v_dsr_mode As dsr_mode,
v_dsr_amt As dsr_amt,
v_dsr_dox As dsr_dox,
v_office_code As office_code,
v_dsr_status As dsr_status,
v_dsr_remarks As dsr_remarks,
v_dsr_refno As dsr_refno,
v_dsr_transmf_no As dsr_transmf_no,
v_dsr_trans_status_xi As dsr_trans_status_xi,
v_ndsr_cnno As ndsr_cnno,
v_ndsr_product As ndsr_product,
v_ndsr_sercharge As ndsr_sercharge,
v_ndsr_ins_amt As ndsr_ins_amt,
v_ndsr_others As ndsr_others,
v_dr_amt_type As dr_amt_type,
v_dr_extra_amt As dr_extra_amt,
v_sales_document As sales_document;
update dtdcdb_rw.dsr_table
set dsr_trans_status_xi='T'
where dsr_cnno=v_dsr_cnno;
end loop;
SELECT *
FROM dtdcdb_rw.dtdc_booking_interface_sd
LIMIT 10;
END $$
DELIMITER ;
Please help
Regards
Bhuvan

Sender JDBC Adapter - Stored procedure

Hello all, I just read a lot of topics in this forum about this subject.
I found two indications in contracdictions in the documentation :<a href="http://help.sap.com/saphelp_nw04/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/frameset.htm">Configuring the Sender JDBC Adapter</a>
1. Concerning Query SQL Statement
You have the following options:
● Specify a valid SQL SELECT statement to select the data to be sent from the specified database.
● Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
2. Concerning Update SQL Statement :
This is recommended if the data has not only been read, but also changed by a stored procedure entered under Query SQL Statement.
It is ambigous, isn't it ?
My question is simple :
Does somebody already use Sender JDBC Adapter with Stored procedure as Select statement including many steps :
- update actions on database
- select query to return data to XI adapter
(Update statement stay empty or with value <TEST>.
To provide more information, I have a reference table to read. But this reference table must be updated by a stored procedure before being able to be read accordingly.
So As I can't do both process with Sender Adapter (call a procedure and execute a select statement) => I want to include both actions (updates and select) in an alone stored procedure.
Could I get wanted data as a resultset ?

Hi,
>>Update statement stay empty or with value <TEST>.
It should be <TEST> if you do not want an Update to happen.
Regarding Sender JDBC adapter with stored procedures, which DB are you trying to access. Sender JDBC adapter does not support Oracle Stored Procedures as they return Cursors and Sender JDBC adapter can deal with only Resultset.
As for executing both Update and Select in the SP, though I havent tried, this should surely be possible.
Regards,
Bhavesh

Executing an Oracle Stored Procedure from Sender JDBC adapter

I could really use some help from someone who had done this before.
I've read the help about using the JDBC sender adapter, but it's not helping enough.
I found this line: "Specify an SQL EXECUTE statement to execute a stored procedure, which contains exactly one SELECT statement.
The expression must correspond to the SQL variant supported by the relevant JDBC driver. It can also contain table JOINs."
That's definately what we want to do, but we can't figure out the syntax.
The procedure in oracle looks like this:
CREATE OR REPLACE PROCEDURE test_ref_cursor
( cur_generic IN OUT result_sets.cur_generic)
as
BEGIN
Open cur_generic for
select
 proposal_number,
 to_char(sequence_number),
 column_name,
 column_value,
 update_timestamp,
 update_user
 from
 coeus.sap_test;
END test_ref_cursor;
And we have tried every kind of statement we can think of, but the file adapter always gives us an "invalid sql statement" error.
Does anyone know what syntax we need to put in the "Query SQL Statement" in the JDBC sender adapter in order to call this procedure? Or is there something wrong with the procedure that is causing the error?
I will absolutely return and give points, but PLEASE read my whole post before answering and do not just link me to or quote the help for configuring a sender JDBC adapter or blogs that are about the JDBC adapter in general but do not deal with the issues I am having. Thank you.

Hi Vanda,
Unfortunately, the sender JDBC adapter does not support Oracle's store procedure/function. Unlike stored procedures from other database vendors, Oracle returns a cursor, not a resultset. The sender JDBC adapter must send a resultset to XI.
There are 2 possible ways you can accomplish this:
1. Use BPM and call the Oracle stored procedure using a receiver adapter via a asynch-synch bridge.
2. Develop a user-module for the adapter, which can be used with a sender adapter.
Thanks
Prasad

How to use a stored procedure as a datasource in Crystal Report for Eclipse

Hi All,
I've written a stored procedure in oracle 10g with few input parameters and one refcursor output parameter. I want to use this stored procedure as a data source for creating a report in "Crystal Report For Eclipse 3.6.0".
When I tried to add this stored procedure to the report using the connection explorer, I don't see any option to do this. But when I try to add any table, it shows options like "Add to the current report"....
Can anybody assist me how to use a stored procedure as a data source in "Crystal Report For Eclipse"?
Which driver should I use to connect to the oracle database? I tried using JDBC Driver for Oracle.
Thanks in advance.

Did you solve your problem? How did you do?

Using a stored procedure for a sender jdbc adapter

Similar Messages

Maybe you are looking for