Using a template in InDesign

Maybe this is very basic, but for some reason I can't figure out how to actually use a template. I laid out and saved one with the text in it. Is that the proper way, or am I supposed to remove dummy text first? If I do that, how will the template style apply?
If anyone could point out or explain how to place a document in a new template and have the template style apply automatically?
Thank you/1

Why is it that you've become so argumentative lately?
Funny, the only time I remember arguing "lately" was once, and with you. So
are my knickers in a knot or yours?
I really don't think you read and think in your haste to post. You are
calling the kettle black. All I said originally was that your post didn't
sound like that much different a take. So why did you respond to argue that?
From that, I defended myself only by showing what you said about my posts
was not accurate. So why did you bother to respond to argue those points?
My next response simply highlighted that you quoted my comment with little
concern for the question it was answering. Again you respond with an
argument!
And look at what you say now:
I talked about mapping styles, which you did not
In post 3, I said: "If there are differences, you can map the styles, ..."
and I addressed the usefulness or lack thereof of dummy text
But the OP's question included "am I supposed to remove dummy text first?"
And my first response was "Whether you delete or replace content upon
importing is up to your workflow and how well your imported copy is styled
to match the ID template." The OP was using dummy text. And I constrained
the wording of my answer to the question.
Good grief man. In light of the errors you make about my comments, why
should I not respond?
Is noone allowed to add comments after you?
Considering your every response commented on my contribution to the thread
and my every response was more or less pointing out an omission on your part
and as such did not actually call for a response, just how the hell do you
have the gall to make such an uncalled for accusation?
What a difference it would have made had your first post just left out "I
have a slightly different take on templates." Regardless of what you say,
that statement implies you disagree with something I've said. If you do,
fine. But address it to me, not to the OP; have something better than the
pathetic excuses to disagree you have come up with here; and don't accuse me
of being argumentative for merely correcting what you say about my comments.
Face it Peter, you are the one being argumentative here.

Similar Messages

  • I designed a template in Indesign but need to save it in a format that can be easily updated by my client. What are my options?

    I designed a template in Indesign and tried to save it in Word for my client but the formatting is all messed up. I'm not surprised since Word has quite a bit of formatting restrictions. I am now thinking about PowerPoint. Do I have any other options? Thank you!

    helencia wrote:
    Do I have any other options?
    Other options for your InDesign-built template? Not really. It's only of use to a user of InDesign. If your client's need was an MS-Office template, you really should have just built it properly in the appropriate MS-Office application. There is no reason you can't; and it's your only remaining, truly viable "other option."

  • Use web template to open a report from a menu

    Hi all,
    I have created one web template where I have a role menu that shows all reports that are available to the user. When the user clicks on one of these reports, the report displays in a new window. So far everything is working fine.
    But, I have also created another web template and I want the report that is displayed in a new window to use this template. How do I do this? I have been looking at the settings for the Role menu, but can't find anywhere to put the template name...
    Anyone have any ideas?
    Thanks and regards,
    Tove-Mette

    Hello,
    yes you can use the publish function, but only to add new entries.
    In Transaction pfcg (not in WAD or BEx) in SAP GUI and then select your role at the tab "Menu" you can add/remove/maintain/organize your menu.
    just click on a menu entry and take sth.like edit.
    Then you will see a link if you didn#t find the string &template_id= the system will take the standard template (Tranaction spro), and you can easily add or change this parameter.
    Hope that helps, please ask if you need further explanation.
    Regards
    Marcus

  • REPOST:Timing does not show up when using custom templates

    all,
    When I create an unstructured template and use it in a report with show timing set to true, the timing does not show up.
    any tips

    Correcting my previous reply,
    Timing will NOT show if you are using custom template.
    null

  • Link to PL/SQL procedure using a Template Manager template.

    Hi,
    I need to link a portal application report (report from SQL query) to a SQL procedure that uses a template manager template. The PL/SQL procedure requires parameters. I'm not be able to create a link based on a PL/SQL procedure. The only solution I found is to setup a link to a Form based on that procedure. But the form is only used to call the PL/SQL procedure by clicking the submit button and redirect to the template.
    Another question:
    Is it planed to support dynamic links based on column conditions?
    I'm using Portal release 3.0.7.6.2.
    thanks in advance
    Jens

    Jens,
    You may want to search the Oracle9iAS Portal Applications forum. It may have the answer you are looking for. This forum is for questions related to the Portal Development Kit.
    Thanks,
    Sue
    Sue

  • Is it possible to display a date as (DD-MON-YYYY) in excel output using excel template in xml publisher

    Is it possible to display a date as (DD-MON-YYYY) in excel output using excel template in xml publisher where date should be displayed as date only not string.

    I've tried to use hierarchy node variables, but it seems like you can't specify a attribute of the hierarchy such as level.  So with the WBS hierarchy, if you create a hierarchy node variable, you specify the WBS value to select (If I understand this correctly).  I wish I could instead specify "give me all the WBS nodes that happen to have the value of the level attribute greater or equal to 3.  If I understand Juergens post, he is saying make security access so that only certain WBS levels can be returned in the query.  I suppose we can try that, but that would then preclude getting the level 1 and 2 in the future if the authorization is global.

  • How can I use the templates in iPhoto to email my photos if I don't have a mobileMe account?

    I have upgraded to iLife11 and want to use the cool templates to email photos. I don't have a mobileme account. It doesn't appear that I can Use the templates. Am I doing something wrong?

    What do you mean by the AOL screen?  Is AOL your ISP?  If it is popping up to connect you to the internet that might be what is preventing you from composing an email. It also could be that AOL was set up as your default email client.  Do you use AOL as an ISP/Email client?
    In Mac OS X Lion (I can't vouch for any other version of Mac OS) to change your default mail viewer/client open up apple's mail app. Go to file->settings Under the general tab it's the top choice if it is set to AOL, you might want to switch it so you can get it to come up with the email you actually use.  Also if you do use AOL, they should have a section in their help about setting up "pop3" email, or how to use AOL mail in outlook.  Now the steps might not be the same as far as what menu choices you have to make, but what you're gonna get out of that section is incomming/out going server's and anything else like ports and etc.  Apple's mail app needs all that same information.

  • How to use a Template in reports as in Forms ?

    Goal:
    I need to use reuse a common code in all of my reports.
    Current scenario:
    I need to display Report title, database name and report REP file name in the header of each report. So if I change at one place it should be reflected at all he places I refer this code.
    P.S. I have a table which stores report file name and title in report.
    Questions:
    1) Is there a way to know the REP file name in the report like we have in the form GET_FORM_PROPERTY ?
    (Because once I know the rep file name I can search in my table to fetch the description, as I don't want
    to hard-code the REP name anywhere in the code)
    2) Getting the database name is not a problem, I can always query v$database or v$instance to get the db name.
    2) Where can I put this code so that I can refer the same code in all the reports, like the way we do it in
    the forms (by subclassing an object or object group from Template or a common form to individual form).
    Thanks
    Mehar

    Thanks very much. Get_Report_name works.
    But I have an additional problem:
    The changes I make in the template, are not getting reflected in the report based on the template i.e. There is no more reference once I make a report based on the template unlike in forms where I can "keep the path" while subclassing any object from one form to another.
    Is it the default bahaviour of using the template ? Or do I need to do something else ?
    Thanks again,
    Mehar

  • Getting error while creating subsite using custom template in sharepoint2013

    Hi,
    I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
    Please suggest me on this.
    Thanks in advance.

    You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
    on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
    Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • Error while posting initial quantities using stocktaking template of DTW

    Hi All,
    I am getting this below error while posting initial quantities using stocktaking template of DTW.
    Can not find this object in B1Application-defined or object-defined error65171
    I am using B1 8.8 PL10 version. Below is my sample txt file data
    ItemCode WarehouseCode Counted
    ItemCode WarehouseCode Counted
    CHA0002 1 500
    CHA0076 1 4000
    Any help is appreciated.
    Regards,
    Noor Hussain

    Hi Gordon,
    Thanks a lot for your time. I am able to post the quantities. Now please let me know how to update the item cost/price for these items using DTW ?
    Regards,
    Noor Hussain

  • Creating a new class using a template class

    I am very new to Java.
    I need to make a new class by using a template class that was given to us.
    I go to File / New / Class but cannot find how to select a template class to create a new class.
    Thanks,
    gs

    gs2010 wrote:
    I am very new to Java.
    I need to make a new class by using a template class that was given to us.
    I go to File / New / Class but cannot find how to select a template class to create a new class.
    Thanks,
    gsYou need to be much more specific as to what you are trying to do.
    What is a "template class"?
    How are you trying to "go to" and "select" the template?
    Etc.

  • Why am I getting an error message when trying to use a template?

    Why am I getting an error message when trying to use a Pages template?

    You are getting an error message because there is an error.
    Knowing wht version of Pages you are using, what template you are attempting to open, and what error message Pages is sending you might help determine why you are getting that specific rror message. Without those, the first sentence above i pretty much all that can be said with any assurance.
    Regards,
    Barry

  • I have Pages 09 and I have  created a business card using the template but can't figure out how to duplicate it to the other 9 on the page Am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

    I have Pages 09 and I have  created a business card using the template but can't figure out how to duplicate it to the other 9 spaces on the page. I am and sure I am going to look daft coz its only the click of a button but I can't work it out Thanks

    I do the following: Hold down the command key and highlight all the items to be reproduced. Then hold down option and drag the items from the first to each subsequent card.

  • I am using your software: CS^ InDesign Suite on a PC using a Windows 7 operating system.     Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar

    Hi,
    I am using your software: CS6 InDesign Suiteon a PC using a Windows 7 operating system.
    Due to eyesight issues, I need to have the menu bars of programs in easy-to-read font and picture size.  Specifically, the menu bar across the top (File, Edit, View, etc.), and the menu bar on the left side with the graphic depiction of options.
    In earlier versions of Windows (e.g. XP), whenever I changed the screen resolution on my computer to a lesser resolution in order to show the link icons on my desktop in a larger, more readable size, all the software programs, including yours, appeared on my screen with the menu bars in the larger font size that I needed.
    However, in Windows 7, this is not the case.  Even though I have selected the lowest resolution, making the icons on my desktop extremely large, I cannot read the options across the top menu bar of your program, nor the pull-down menu items that they contain.  I cannot see the graphic depictions of options on the left side of the screen. They are all too small.  How can I make your program increase the size?

    CS6 is not high-DPI compatible/ enabled and that can't be changed. If you cannot6 make it work with your operating system means, then short of joining Creative Cloud and using newer versions there is nothing you can do.
    Mylenium

  • Using different templates for the desktop and phone versions of the same blog

    I have a site which was created in Adobe Muse and is hosted on Business Catalyst.
    I have created both a desktop and a phone versions of the site.
    I  want to know how I can integrate the blogs that I  currently have on the desktop site with the phone version that I just did, using different templates for the desktop and phone versions of the same blog. This is in order to ensure that visitors to the blogs on the website are directed to the templates that render correctly for the devices they are using.
    My current approach has been to create both a desktop and phone versions of the blogs. The problem with this however, is that the dates are different and the comments are separated between the two blog versions!
    I  have also tried enabling mobile templates in BC, but still couldn't find a way to specify the mobile versions of the templates for the same blog?
    To recap my problem, I basically  need a solution where the same blog uses different templates for desktop and mobile (both templates use different navigation headings and menu styles)
    Thanks.

    There can be few reason for this, including page contents links or contents used in phone/tablet version.
    Please provide the site url , also try to publish the site as a trial site in Business Catalyst with all layouts which would help to isolate the issue.
    Thanks,
    Sanjit

Maybe you are looking for

  • Solaris 9 remote login (ssh) drops connection

    Hello All, I wonder if you can help me... Let me give you some set-up details before I ask you the question. I have Ultra-60 at home with Solaris 9 and recommended patch cluster installed. The machine is connected to a Linksys WAG54G ADSL router/mode

  • MDM interfaces does not exist in XI repository

    we just installed MDM 5.5 SP3 and imported the XI MDM content into the XI repository. but when we try to create business system for R/3 and choose the interfaces, there are no MDM interface for us to choose from. example: CREMDM.CREMDM04, DEBMDM.DEBM

  • Can't see video in Color

    Hello there. I am using an iMac 17" with an ATI Radeon X1600 video card. When I import a video to color from FCP, I can't see any type of preview. I can see the video in the time line, however I can't see any scopes or waveforms. I already thought it

  • List of Built in Functions

    Hi, Can anyone tell me how to get list of built in Oracle functions..eg(Sum,Count,Trim,etc).. Thanx in adv Balajee

  • Copy from one from to another form..

    hi. i have two forms... form1 customizaiton from form2 sales order. Form one i selct one itme it is having bill of materals 4 items the parent item type is tempalte at bill of materials which means onece u slect parent item child items bill of materi