Using a time capsule to extend a fios router?

I know this topic has been covered many times, but I seem to have trouble finding my answer to my exact questions. I have verizon fios wireless router that they provided with the service. We have a large house with the fios router at one end. At the opposite end, the signal is very weak. I want to use my time capsule to extend the network to the other end of the house. Is this possible without connecting a long ethernet cord and placing the TC at the other end of the house. My ideal situation would be to plug the TC into the wall at opposite end of the house of the Fios router and have it connect to the Fios router and extend the wireless connection...is this possible? If not, can someone please solve my problem?

I just turned the wifi setting of my fios router off and plugged it directly into the time capsule. If I had a large house like yours, I would look at something like this:
http://www.engadget.com/2011/06/08/netgears-universal-wifi-range-extender-now-av ailable-for-baldin/

Similar Messages

Can i use my time capsule to extend my wifi signal without physically connecting it to my router?

I currently have a BT Homehub connected to a modem, which is connected to the ethernet port in my wall (which is downstairs). I bought a timecapsule to wirelessly back up my computer. It is connected via ethernet cable to my router. I have recently been having trouble getting a wifi signal in one room in my house (upstairs). To fix this i was wondering whether it is possible to move my time machine somewhere upstairs, to a location closer to this room, and have it transmit a wifi signal without it being connected to my router via ethernet. And if so how would i go about doing this?
cheers
jadidev

Can i use my time capsule to extend my wifi signal without physically connecting it to my router?
Yes, if you have an Apple router.
No, if you have a BT router.
IF....your Time Capsule is currently set up to provide a wireless network signal, you could add another Apple device...like an AirPort Express....to extend the Time Capsule wireless signal.

Can I use my Time Capsule to extend a current network? If so, How?

Can I use my Time Capsule to extend a current network? If so, How?

I want to use it wirelessly to extend the range of the network. I currently have an xfinity router as the main.
You may not have understood what I was trying to say above.
If you want the Time Capsule to extend wirelessly, then you must have an Apple router as your "main" router.
You have an xfinity router. You cannot use the Time Capsule to extend the range of an xfinity router wirelessly.

Can I Use My Time Capsule as a 2nd Wireless Router? Pls Help

Thanks for trying to help. I have a Time Capsule that I'm currently using to back up my files. My next door neighbor is willing to share his internet with me for half the monthly cost. He already has a wireless router and I can connect to it (no probs) except the signal strength is not so powerful since I'm a couple feet far from his router. I was wondering if I can use my Time Capsule to hook up the internet via WIFI through his wireless router (that way I have a stronger signal strength from my Time Capsule). Basically using my Time capsule as a 2nd wireless router.
Neighbour's wireless Router = Time Capsule = My Macbook
If I can please tell me how to set this up in details please. thanks for your time.
Message was edited by: Thomas Pink

You are trying to set up the Time Capsule as a Wireless Router
and Repeater? - To share an existing wireless network, wireless?
The AirPort Extreme was capable of repeating (like a transceiver)
to and from an existing wireless network, to expand upon it; but
only did this with another AirPort product, such as an Express.
The Time Capsule and many of its features are outlined here, with more
information: AirPort + Time Capsule: http://www.apple.com/support/airport/
You may have to direct your question regarding expanding an existing
wireless network, to the Discussions section for the specific products.
Usually, the "extend a network" wireless feature in the software setup
only applies to the use of a second Apple AirPort-type base station;
such as the Extreme, Express, etc. The compatibility is between the
AirPort-like Apple products; but a bridge could be made if an Express
were attached to the other wireless network via Ethernet cable, then
the Time Capsule may be able to see it. This would require testing.
Apple - Support - Discussions - AirPort (+ Time Capsule)
http://discussions.apple.com/category.jspa?categoryID=140
Good luck & happy computing!

Can I use Extreme with Time Capsule to extend my gateway router and still use Capsule as "external HD"?

Bought Airport Extreme with Time Capsule version 7.7.2 with 2 Terabytes Feb 2014. It was probably an expensive mistake, but after searching for weeks for a external hard drive, it seemed reasonably priced to just use the capsule as my external hard drive for the price I paid. Spend an hour with Apple Care to get it working-had to use ethernet cord to my iMac OS 10.8.5 processor 2.5 GHz Intel Core i5. I did not "need" the airport as we have a Winstream SAGEMCOM modem/router (Sagemfast 1704) But, I was desperate and about to lose my old external hard drive with literally had 3 computers worth of information on it. It had already "died" once, but got it back, so once I got the airport/capsule and was told I just paid for an expensive HD, I had no time to take it back to get something else-I had to transfer my info right then. We (Apple Care) could not get it to work as a HD wirelessly. It may be because it was being set up for the first time; I don't know. I was hoping I would get a transcript of all done so I could do it myself if needed later on, but when I looked at my email-they didn't do that. (Don't know if that is normal, I was used to other "techs" sending the email.) So now I really want to try to move my airport and "extend" our wifi as it said on the "box" that you could do...
Our Windstream router had to be placed in the lower level at the bottom of our stairs. The stairway is "open" (no door going down the steps). I want to place the Extreme at the top of the stairs so that we can use some things in our offices or not have Netflix on our TV lose connectivity when we all are on our computers.
I know I need an ethernet cord to connect directly with the modem/router to the Airport Extreme. I don't know what I will need to do after I connect it as it was so goofy when we set it up the first time (With the app it would disappear and not show up..) But my biggest concern is will I be able to still use the capsule as my hard drive and will I be able to do it wirelessly? (Even with it connected by ethernet, every day I have to re-connect to it before I can click on anything on the hard drive. It never shows up on it's own as my old HD did. That drives me nuts.) I do back up using the Time Capsule feature as well. I appreciate any help.

I am still willing to plug in the ethernet cord to the modem/router and try it IF I was able to get a step by step instructions..
Connecting the Time Capsule (TC) to the existing Winstream by Ethernet would be the basis for a roaming type network. This type of network allows you to basically "roam" with a wireless client and connect to either router. This, in essence, would provide you with an "extended" wireless network. The Apple routers can work with just about any manufacturers' routers in this fashion.
The keys to having a successful roaming network are as follows:
The routers must be interconnected by Ethernet.
Both routers will broadcast their own Wi-Fi network, but MUST use the same Network Name (or SSID), wireless security type (WPA or WPA2), and wireless password.
The TC MUST be reconfigured as a bridge.
Connect a single Ethernet cable between one of the Winstream's LAN ports and the WAN (circle of dots) port on the TC.
The basic steps are:
Power-down the Winstream.
Perform a "factory default" reset on the TC. Leave the TC powered-down after the reset has completed.
Connect the TC to the Winstream using an Ethernet cable.
Power-up the Winstream. Wait at least 10-15 minutes to allow it to initialize.
Power-up the TC. Wait at least 5 minutes to allow it to initialize. (Note: Since we just reset the TC it will be performing as a wireless router that will be broadcasting an unsecured Wi-Fi network with a Network Name of something like: Apple Network NNNNNN)
Connect your computer to the Winstream's Wi-Fi network.
Run the AirPort Utility. select the TC, and then, select Edit.
Go to the Network tab.
Change the Router Mode option to: Off (Bridge Mode)
Select the Wireless tab.
Verify that the Network Mode option is set to: Create a wireless network
For Wireless Network Name, enter the Wi-Fi network name used by the Winstream.
For Wireless Security, select the equivalent security type that is used by the Winstream. (Note: Use "WPA/WPA2 Personal" if the Winstream is using WPA/TKIP. Use "WPA2 Personal" is the Winstream is using WPA2/AES.
For Wireless Password, enter the same password used by the Winstream.
Select Update and allow the TC to restart.
As far as your external HD, yes you should still be able to use it as before.

Time Capsule Bandwidth Speed versus Fios Router Directly

Verizon just replaced my Fios Router because download speeds were 5 megs/sec. I just received my new one in the mail and hooked it up. I connected to the FIOS router and was getting 27 mbps download and 5 on the upload. I went back to my original setup of turning off the Radio broadcast on the FIOS router and using my time capsule to broadcast wifi....i have dropped to 5 mbps download speed--same speeds when Verizon thought it was their problem. What do I do? I don't understand the limitations or what has happened. Can someone provide suggestions?

Bridge means to remove all routing from the TC.
Open Manual setup in airport utility (on lion v5.6 utility only).
Go to internet tab.
Go to Connection sharing.
Select off, bridge mode.. update the TC.. it is now bridge.
If still slow there are a number if issues.. and I doubt we have found the ultimate cause.. bad firmware in 7.6 could be one of them .. go back to 7.5.2
ie in airport utility go to the firmware update but hold down the option key and you can select older firmware.. they work better than new ones.
You also might need to reset the TC to factory to get rid of the poor settings.

How do i use my time capsule and extend the network with airport express

I have a new iMac and Time Capsule, how do i extend the network with airport express. My time capsule does have a guest net work, and logins and passwords? I am no computer person. So for me it would have to be spelled out.

Use the search as this has been done to death ..
Bob Timmons is the expert on this.. look at his answers here.
https://discussions.apple.com/thread/4274187?start=0&tstart=0
https://discussions.apple.com/message/21856077#21856077
This has been automated in the v6 utility. I am used to doing it manually in v5 utility which is also fairly easy.
Apple doco is also good to read.
http://support.apple.com/kb/HT4145
http://support.apple.com/kb/HT4259
Note.
You cannot extend the guest network unless everything is up to date 7.6.3 firmware. And that is only with the TC as the main router in the network.
All apple routers can be configured as the main wireless or as the extend wireless.. so don't worry if a post uses express or extreme or TC.. they are for wireless, the same thing.

Can I use a Time Capsule to extend my wireless network.

Hi, I have just bought a 3TB time capsule as my old (flat style) 500GB TC is reaching full capacity. The old style TC will then be surplus to requirements as a data storage unit, at least for myself, though it might be useful for my son to use as his Time Capsule.
Ideally, as we have a wireless 'blind spot' out in the rear extension of the house, it would be useful to use the unit to extend my wireless network (and also use it as a separate TC if possible). Is this possible? If it is how would I go about it?
Hope someone can help . . . .
Cheers
John

Is it possible for you to consider connecting the Time Capsules together using a wired Ethernet connection?
Here is what Apple has to say in their support document about extending:
Adding Wi-Fi base stations when it is unnecessary can reduce Wi-Fi throughput because the Wi-Fi network will require more data management overhead. The network configuration also becomes more complex. In the case of a wirelessly extended network, throughput may be reduced to less than 60 percent of that of a single device. The general rule is to keep the Wi-Fi network as simple as possible. You can accomplish this by using the minimum number of Wi-Fi base stations required to service the physical network area and by using Ethernet wherever possible.
Extending the range of your Wi-Fi network by connecting Wi-Fi base stations together using Ethernet is always the best option, and will provide the best throughput.
Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations

Using a Time Capsule to Extend a Non Apple Network

I have a home network that i use to connect to through wifi, i tried to extend it through my Time Capsule and it said "This network cannot be extended".
Whats the deal?
Message was edited by: Robert Boinski

If you've managed to set the Time Capsule up to "extend a wireless network" from the Belkin router, you are the first person to report success with this type of configuration.
Would you mind posting the details of your configuration so that others might benefit from your success?
You can perform a quick check on your configuration by locating your Mac near the Time Capsule and holding down the option key on the keyboard while you click on the fan shaped AirPort icon at the top of the screen.
The BSSID you see will be the AirPort ID of the Time Capsule. If you perform the same check near the Belkin router, you should see a different ID, that of the Belkin. Is this the case?

Using a Time Capsule to extend an airport network

I'm making plans to replace my aging (6-8 years old) Airport equipment with newer equivalents. My current setup consists of an Airport Express acting as the main router (wired into the ADSL modem and stereo), with an Airport Extreme extending the network in another room (with connected printer). I realise that one would normally use the Extreme as the main unit and extend it with the Express, but logistical reasons (the phone line is right next to the stereo) mean that I need to use the Express as the main unit or else lose the stereo from the network.
Anyway, I plan to replace the Airport Express with a newer Express and replace the Airport Extreme with a Time Capsule. Ideally the network setup would remain the same, with straight swap-outs of the units. However, I have been given conflicting information regarding whether a Time Capsule can or cannot be used to extend a network in this way (ie. whether or not it can be used to extend a network in which the main router is an Airport Express).
Can anyone provide me with a definitive answer to this? Many thanks.

My policy on answering questions is that I never answer one unless I've done it myself to verify.
In addition, you might want to refer to Apple's own Support Document linked below on extending....which anyone working at an Apple Store would have immediate access to with a few clicks at the computer:
Unfortunately, if someone at an Apple Store told you that the Time Capsule could not be used to "extend"......he was just wrong or too lazy to look up the answer, so he made one up. You might want to show him his own support document...and then talk to another sales guy there when you need product information.
Products Affected
AirPort Express 802.11n (1st Generation), AirPort Extreme 802.11n (1st Generation), AirPort Extreme 802.11n (3rd Generation), Time Capsule 802.11n (1st Generation), Time Capsule 802.11n (2nd Generation), Time Capsule 802.11n (3rd Generation)
http://support.apple.com/kb/HT4259
Good luck on your consensus building.

Using Time Capsule to extend network

Hello: I have a Belkin N1 wireless modem router (ADSL) and have my Time Capsule connected the the modem via ethernet cable. I have the modem at the moment connected to my MacBook Pro via ethernet cable, and am able to connect to the Internet in that manner. My problem is that I cannot sem to extend my wireless network with my Time Capsule, which is what I want to do. Any advice or help? Thanks in advance.

I first tried connecting my new Time Capsule to my 2Wire gateway (DSL modem and router) via the ethernet cable to form a parallel network, but some incompatibility kept messing up the gateway's settings (resulting in losing Internet and phone altogether). I have since used the Time Capsule to extend the network via wireless only. This currently seems to work, although I have lost access to the Time Capsule on more than one occasion this afternoon for no apparent reason. I have not yet been successful in further extending the network using my Expresses -- which are used to connect ReplayTVs to the network.
Unfortunately, I cannot find a way to turn off the router function on the gateway (a previous DSL modem allowed me to do this -- most recently, I had my Extreme connected up via ethernet to the 2Wire gateway and forming a parallel network).
In case I need to replace the gateway to get this to work properly and in a stable fashion, does anyone know which AT&T DSL appropriate modems are most compatible with the Time Capsule?

Using time capsule to extend a 2003 airport extreme

I have a 2003 airport extreme. I have a 2011Time Capsule. How can I use the Time Capsule to extend my range wirelessly?

Unfortunately, this is not possible, since the older AirPort Extreme does not have a setting to "extend a wireless network", which was added to the AirPort Extreme models in 2007.
It might be possible to have the older AirPort provide some additional wireless coverage if it can be permanently connected back to the Time Capsule using a wired Ethernet cable connection.

Problems using time capsule to extend wireless network

Hi all,
For some months I had to move to Germany for work (I'm from Italy, sorry for my English).
I am sharing internet with some other people, the wi-fi router is in their apartment, so basically I don't have access.
As the signal is strong enough only in one room I would like to use my time capsule to extend it also in the other rooms.
But when I try to extend it, my macbook pro connects to the network I would like to extend and the time capsule is not seen anymore.
To see the time capsule again in the airport utility i have to reset it to factory default.
Do you have any idea?
The wireless network is WPA2 protected, the provider is the German "Unity Media".

As the signal is strong enough only in one room I would like to use my time capsule to extend it also in the other rooms.
Apple's "extend" feature will only work if the Time Capsule is "extending" the wireless signal from another Apple wireless router. In other words, the "extend" feature is not compatible with wireless routers from other manufacturers.
You will need to connect the Time Capsule to the wireless router using a wired Ethernet connection. Connect from one of the LAN <-> ports on the wireless router to the WAN "O" port on the Time Capsule. Then, you can configure the Time Capsule to provide a separate wireless network for your use.

Extending my wireless network using a Time Capsule (U-Verse)

I am trying to extend my wireless network but every time I make a change on my Time Capsule I lose all connections and have to start over....
Here is my setup:
My internet provider is AT&T U-Verse
Router - 2Wire (I do have access to the router)
Connected to the router is a netgear 8 port switch used for all of the wiring in the house.
In my family room at the wall jack I have attached a Cisco 8-port switch.
To the switch are several AV devices including my 3TB Time Capsule.
My wireless setup is controlled by the 2Wire router.
What I am trying to do is to use the Time Capsule to extend my wireless network so portions of my house will receive a stronger signal.
I attempted several do configurations but after reboot it either can't find the network, I lose my Internet (from the time capsule) or some other error.
I usually have to connect a cable to the TC and my MacBook Pro to reset everything back to what it was.
Can anyone offer me any suggestions on how to configure this properly?
Thank you
Elliot

Open AirPort Utility, select the Time Capsule and click Manual Setup.
Click the Time Capsule tab at the top of the screen and check the settings on this page for correct name, Time Zone, etc. My TC looks like this:
Next, click the Wireless tab to the right of the Time Capsule tab.
The Wireless Mode is set to Create a wireless network.
Wireless Network Name would be the exact same name as your 2-Wire wireless network.
If the 2-Wire is using WPA2 Personal security, make sure the Time Capsule is set the same.
Enter the same password as the 2-Wire for the Wireless Password
Settings should look like this:
Next, click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click Update to save the settings and allow a minute for the Time Capsule to restart to a green light
Very Important....
Next, power off the entire network....all devices, 2-Wire, Time Capsule, computers , printers, etc.
Wait a full minute
Start the 2-Wire first and let it run a full minute by itself
Start the Time Capsule next the same way
Keep starting devices one at a time until the entire network is back up
You should be in business now

Can I use my Time Capsule without cable internet?

We lost our cable service and are now operating on our resort's wifi. Is it possible to use my time capsule for backup and/or router now that we don't have internet coming in on a cable?

I am not an express fan.. but what I need to help you is screenshots from your airport utility.
I think it would be smart to
1. Factory reset the Express.. it is lost and if you run Yosemite that is no surprise.
2. If you use iphone or ipad then try using the airport utility in that to do the setup.. it is better than Yosemite.
3. If you do it from computer.. try plugging the express LAN port to the computer.. Leave the TC off.. so there is no Apple wifi to connect to. And turn off the wireless in the computer.. delete all the current wireless names.. then turn wireless back on again.. You want it to be usable by the airport utility but not linked to the resort wifi.
Then start the setup..
Apple do make logical choices based on how you have the express configured.. if it finds itself in this setup it might actually work..
If it does not come up with correct setup then choose from options.
Here is how I did it on airport time capsule..
The utility picks something.. I do not want it to extend.. so click options.
I want to add it to an existing network.
In your case you would add to existing network.. and the option to Join a wireless network should be there.
If you cannot make sense of it I will get Bob Timmons to help as he uses this setup often and knows it very well using the Express.

Using a time capsule to extend a fios router?

Similar Messages

Maybe you are looking for