Using a US Airport Extreme in England

I have an Airport Extreme that I've been using in my home in Maryland for wi-fi. Now I'm moving to England. Will the Airport Extreme work over there? I see two potential issues: The plug that's supplied won't fit in the British outlet. And do they use different frequencies for wireless broadband over there? Many thanks for any light you can shed on this.

The frequencies are basically the same, except in US they have 1-11 and in UK we have 1-13.
Power shouldn't be a problem either, you can by us to uk adapter probably, also, the airport extreme has an external power unit which has an input of AC 100-240V 50/60Hz which UK is 230V @ 50Hz which is fine.
The power lead you can take out of the adapter and find a cheap (13amp plug to figure of 8 socket) which you can get any electrical store very cheap which will keep your wiring cleaner!

Similar Messages

  • My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?

    My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house.  Is there a way to use the second Airport Extreme for file storage on this network?  Network is administered through an iMac running OS X Yosemite 10.10.2.  Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

    Ok.. gottcha
    The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
    Here is my usual set of instructions to get anything working on Yosemite.
    The best way to fix problems is a full factory reset of all the AE in the network.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 and AEwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Now mount the disk of the second AE in finder... manually.
    Use Go, Connect to Server and type in the AE ip address.
    SMB://10.0.1.2
    Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
    The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
    See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

  • How do i use a 2nd airport extreme both are newer models

    how do i use a 2nd airport extreme both are newer models

    I assume that you mean that you want to extend the range using wireless only.
    This Apple Support Document will tell you exactly how to do that:
    http://support.apple.com/kb/HT4259
    The instructions assume that you have AirPort Utility 5.6 for Mac OS X Lion , so if you have not already done so, you will need to download and install this application to track the instructions in the support document.

  • What os do I need to use the newest Airport Extreme?

    what operating system do I need to use the newest Airport Extreme? I am running on 10.6.8 but I think I need 10.7.5.  Is it worthwhile to go with the latest Mavericks?

    1. You should check if Mavericks is supported on your Mac - OS X Mavericks - Technical Specifications
    2. You can also check AirPort Utility 6.3.1 for Mac. It supports 10.7.5+, 10.8.3+ or 10.9+.
    3. On Windows side AirPort Utility 5.6.1 for Windows . It supports W7+.

  • I presently use an older AirPort Extreme but my reception comes & goes does this occur with the new extreme?

    I presently use an older AirPort Extreme but my reception comes & goes. Does this occur with the newer version?

    1)  If the reception comes and goes as a result of wireless interference from other sources in your home and around the home...other wireless networks in the neighborhood....or...nearby cordless phones.....then a new router is likely to experience the same issues. See this Apple support document for symptoms and fixes of wireless interference.
    http://support.apple.com/kb/HT1365
    2) If the reception comes and goes as a result of an aging power supply in the older AirPort Exteme or another component that is intermittently acting up, then a new router should take care of that.
    What we cannot tell you is whether 1) or 2) applies to your situation.  If possible, it would be good idea to take the older AirPort to an Apple Store or Apple Servicer....if you have one near you....to let them take a look.

  • I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme  802.11ac Wi-Fi for my wifi?

    I have an 2tb time capsule 802.11n Wi-Fi base station can I use this as an external hard drive and use a new airport extreme  802.11ac Wi-Fi for my wifi?

    You can use the 2 TB Time Capsule as a network drive. That means that it must connect to one of the Ethernet LAN <--> ports on the new AirPort Extreme, or connect to the network using wireless.

  • Can I use my 2010 AirPort Extreme as a range extender with a new AirPort Extreme?

    I want to use an existing AirPort Extreme (2010 model) with a new AirPort Extreme to extend the range and signal strength into a shop. They are different designations, one n and the other ac. Are they compatible. I need to know before I buy the new router.

    The new AirPort Extreme will provide an ac,n,g,b compatible wireless signal.
    The existing AirPort Extreme can be configured to extend the n,g,b signal, but it cannot extend the ac signal.

  • Can I use an old Airport Extreme as an extender with a new Airport Express

    Hi All,  I have Verizon Fios and the data line runs into my bedroom.  I purchased a new Airport Express today to replace the Airport Extreme (from 2006).  Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there).  I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible?  If so, how do I set it up?

    Can I use the old Airport Extreme as an extender
    Is this the "round" or "dome" shaped AirPort Extreme?
    If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
    However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
    In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
    f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

  • Can I use an American Airport Extreme in the UK?

    Hi guys,
    I bought an Airport Extreme in the US sometime ago. I never managed to get it to work and gave up. My Wireless has gone down so I thought I would give it another go. Still can't get it to work.
    Will a USA airport extreme work in UK?
    I have updated firmware to version 7.4.2
    The big issue I think is on the wireless options page I can only select America, Canada or a bunch of South American counties. Do the US have different wifi signals to UK?
    Is there anyway of over writing the firmware with UK firmware?
    Is it not any of the above and maybe I am just setting it up wrong?
    Please help,
    thanks.
    Jamie

    Welcome to the discussions!
    +Will a USA airport extreme work in UK?+
    Yes
    +Do the US have different wifi signals to UK?+
    Yes. UK uses channels 1-13. US uses 1-11. You won't be able to use 12 and 13 on your AirPort Extreme. I'm not sure about 5 GHz channels if you plan to use that frequency.
    +Is there anyway of over writing the firmware with UK firmware?+
    No
    +maybe I am just setting it up wrong?+
    If you can tell us what modem (make and model number) you are using with the AirPort Extreme, we may be able to help with the setup.

  • Connecting to Maxtor HD using PC and Airport Extreme

    I am trying to connect to my Maxtor HD from my new PC using my new Airport Extreme. I have the internet and my printer working, but having trouble connecting to the HD. I have updated the Airport sofware, and it recognizes the HD, but I cannot get the computer to connect to it.
    Any advice?

    SMB windows side
    AFP Mac side

  • How many devices can I use with an AirPort Extreme Base Station?

    How many devices can I use with an Airport Extreme Base Station? Devices included a mac, iphone, ipad and pc laptops.

    The AirPort Extreme will support up to 50 wireless devices and 200 wired Ethernet devices. I would imagine that this would probably be adequate for most homes.

  • How do I use a 2nd Airport Extreme plugged into an Ethernet Wall Plug to join an existing wireless network to give me a better signal upstairs?

    I have a 5th generation Airport Extreme giving me a great wireless signal on the 1st floor of my house. However the signal upstairs is weak. So I purchased another 5th generation Airport Extreme that I would like to plug into an ethernet wall plug upstairs. I would then like to have the upstairs Airport Extreme join the same network thus giving me a good wirelss signal upstairs. I have a MacBook Pro running OS 10.7.4. Can somebody give me step-by-step directions to set up the upstairs Airport Extreme?

    I assume that the new AirPort Extreme is still in its original factory default settings.
    Before you connect the AirPort Extreme, please connect a laptop to the Ethernet cable that will be used for the connection and turn off the wireless on the laptop. Make sure that you can can connect to the Internet before you begin to configure the AirPort Extreme.
    Disconnect the Ethernet cable from the laptop and connect it to the WAN "O" port on the upstairs AirPort Extreme and power it up.
    Open Macintosh HD > Applications > Utilities > AirPort Utility 6.1
    Look in the upper left hand corner of the screen for a tab or box that reads "Other AirPort Base Stations (1)"
    Click on that box,then click on the name AirPort Extreme xxxxxx
    Wait a moment while AirPort Utility analyzes the network and then displays a message that the AirPort Extreme will be configured to extend your existing wireless network.
    Enter a Base Station (device) name for the AirPort Extreme (and a device password if prompted), then click Next.
    Wait another minute or two until AirPort Utility notifies you that the AirPort Extreme has been Set Up.
    That's it.

  • Using a second AirPort Extreme: Many questions

    I currently have the older A1143 AirPort Extreme (the first model with "draft N" capability). Have had it since 2007.
    I want to get the newer APE model A1408 for better range, speed, and other improvements. This has the "final N" specs.
    My questions are:
    Can I use the older APE to extend the range of the new APE so that I have better coverage through the house?
    Will using the older APE with its "draft N" spec downgrade the quality of the signal with the new APE?
    Would I be better off to fork over the money for a new AirPort Express to work as a second router to extend the range of the new APE A1408? Or would the older A1143 Extreme be a better choice as a second router?
    Is there a difference between "extending" with a second APE  and setting up a Wireless Distribution System? In other words, is "extending" the same thing as setting up a WDS?
    If this is a good idea, any general advice on setup?
    Sorry for all the questions. Thanks in advance for any help.

    Can I use the older APE to extend the range of the new APE so that I have better coverage through the house?
    Yes, with the note that your single band AirPort Extreme (AEBS) will only be able to extend one band...probably the 2.4 GHz band...of your dual band AEBS router.
    Will using the older APE with its "draft N" spec downgrade the quality of the signal with the new APE?
    No, the final "N" specifications adopted were essentially identical to "draft N"
    Would I be better off to fork over the money for a new AirPort Express to work as a second router to extend the range of the new APE A1408? Or would the older A1143 Extreme be a better choice as a second router?
    There would be no advantage other than possibly some size and space savings using the AirPort Express. In case you want to attach a remote hard drive to the device...you can do this with the AEBS, but not the AirPort Express (AX).
    Is there a difference between "extending" with a second APE  and setting up a Wireless Distribution System? In other words, is "extending" the same thing as setting up a WDS?
    You would definitely want to avoid using the older static WDS system because it only operates in "g" wireless mode...and on top of that, there would be a tremendous bandwidth penalty using this type of setup as well.
    If this is a good idea, any general advice on setup?
    Remember that the extending device can only "extend" the quality of signal that it receives if you are planning to try to configure things using wireless only. So, location is critical....ideally, you want line-of-sight or as close to that as possible between the "main" AEBS and the "extending" AEBS.
    The "best" way to extend a wireless network is to connect the "main" and "extending" AEBS devices using a wired Ethernet cable connection, but that involves some drilling and other probable challenges.

  • External Hard Diver Fromatting Preventing use with USB Airport Extreme ?

    I am putting together a network with my new MacBook and Airport Extreme and old XP Windows desktop and Seagate USB external hard dive. The drive is not recognized over the network from the Mac, butis available when the USB is plugged directly into the Mac. I called apple support and was told that this is because the Seagate drive is Windows NT formatted which is not recognized by the Airport Extreme, and that I will have to reformat the drive to a DOS or Mac format for this to work. I just want to see if anyone has any other ideas before reformating. Thanks.

    If you ever plan to read the drive directly plugged into the PC, you'll need to format it FAT/FAT32. If you ever plan to use it for Time Machine it needs to be formatted HFS+. You can re-format later (data removed) if you wish.

  • Wi-Fi Repeater using TimeCapsule and AirPort Extreme

    Brain mush, help please.
    We have:
    Verizon Fios and the Verizon Fios modem router combo: ActionTec MI424-WR Rev F (Henceforth, AcTec)
    A finicky, but abled TimeCapsule A1254 (TC)
    And a new AirPort Extreme (AE)
    They support:
    Non-wireless Brother Inkjet (Bink)
    Wireless Brother Inkjet (WBink)
    Non-wireless HP Laser (Laser)
    Non-wireless wide-format HP DesignJet (DJ)
    2007 MacPro 17 (17")
    2013 MacAir 13 (13")
    2011 MiniMac (MM)
    2013 Windows 8 Touchscreen PC (Piece-of-Crap)
    3 iPhones, 4s, 5, 5s (4s, 5, 5s)
    1 or 2 infrequent guest or back-up computers (GMac, GPC)
    6 SSD externals for back-up and sharing (XSSDs)
    Everything listed is proximated within 2 rooms except for the 5s, WBink, and 13" that are ~50' away and through 4 walls (2 are cement).  Wi-Fi signal wise, the 5s rarely picks up, the WBink was so bad I just hardwired it to the 13", the 13" is frustratingly bad with continuely interuptions, stalls, and disconects.
    All three routers are broadcasting seperate networks even though we primarily use the one from the TC, until it stalls, then I usually switch to the AcTec which only sometimes works better, if the 13"s airport even finds it that is, it is weaker.  The AcTec is also more difficult to configure as it's not an Apple.  The new AE was just hardwired into the AcTec in the hopes that it's range/frequency/speed would superceed the TC's.  Unfortunately it's performing about the same for the 13" and 5s, maybe just a smidgen better.
    Since we now use SSD for back-up I would like to repurpose the TC as a repeater for the 13" and 5s.  How do I do this? 
    Please understand that I am not intentially unfmailiar with NAT, bridge, Pvpv0, DNS, Proxy, IDNS, TexCode, etc. I just have not been able to prioritize learning, not when Apple make me encounter it so infrequently. I am sorry I need it explained to me like I'm 4 years old.  Thank you very much, I am grateful and really will appreciate some help.

    Brain mush, help please.
    We have:
    Verizon Fios and the Verizon Fios modem router combo: ActionTec MI424-WR Rev F (Henceforth, AcTec)
    A finicky, but abled TimeCapsule A1254 (TC)
    And a new AirPort Extreme (AE)
    They support:
    Non-wireless Brother Inkjet (Bink)
    Wireless Brother Inkjet (WBink)
    Non-wireless HP Laser (Laser)
    Non-wireless wide-format HP DesignJet (DJ)
    2007 MacPro 17 (17")
    2013 MacAir 13 (13")
    2011 MiniMac (MM)
    2013 Windows 8 Touchscreen PC (Piece-of-Crap)
    3 iPhones, 4s, 5, 5s (4s, 5, 5s)
    1 or 2 infrequent guest or back-up computers (GMac, GPC)
    6 SSD externals for back-up and sharing (XSSDs)
    Everything listed is proximated within 2 rooms except for the 5s, WBink, and 13" that are ~50' away and through 4 walls (2 are cement).  Wi-Fi signal wise, the 5s rarely picks up, the WBink was so bad I just hardwired it to the 13", the 13" is frustratingly bad with continuely interuptions, stalls, and disconects.
    All three routers are broadcasting seperate networks even though we primarily use the one from the TC, until it stalls, then I usually switch to the AcTec which only sometimes works better, if the 13"s airport even finds it that is, it is weaker.  The AcTec is also more difficult to configure as it's not an Apple.  The new AE was just hardwired into the AcTec in the hopes that it's range/frequency/speed would superceed the TC's.  Unfortunately it's performing about the same for the 13" and 5s, maybe just a smidgen better.
    Since we now use SSD for back-up I would like to repurpose the TC as a repeater for the 13" and 5s.  How do I do this? 
    Please understand that I am not intentially unfmailiar with NAT, bridge, Pvpv0, DNS, Proxy, IDNS, TexCode, etc. I just have not been able to prioritize learning, not when Apple make me encounter it so infrequently. I am sorry I need it explained to me like I'm 4 years old.  Thank you very much, I am grateful and really will appreciate some help.

Maybe you are looking for