USING AC ADAPTER WITH USB 2.0 PORT

I recently installed a new EA6500 wireless router (AC1750). I also bought some wireless AC USB adapters (WUSB6300). Will use of the AC USB adapters increase network speed if they have to be plugged into the USB 2.0 ports on my laptops?

The WUSB6300 utilizes the USB 3.0 standard. However, the adapter is backward compatible with USB 2.0 ports. The WUSB6300 could support up to 300 Mbps for 2.4 Ghz and upto 866.7 Mbps for 5 Ghz.
Key features of Linksys Wireless-N and Wireless-AC adapters

Similar Messages

Problem with Send using JMS Adapter with Websphere MQ

Hi,
We have two scenarios using JMS Adapter with MQ:
1. File->PI->MQ
This works fine and drop the file in MQ correctly.
2. MQ->PI->File
This gives an error reading from the queue: (see highlighted in the log below). It correctly connects to the queue name. But it fails with the message "Could not begin a AF transaction".
Our PI version is 7.0 SP 13
Websphere MQ Version 6.0.
Any idea what could be wrong?
Cluster Node Administration Information Availability Times
Cluster Node Details for Channel CC_JMS_MQ_Sender
Short Log
In the Last 4 Hours Server 0 15_92786
_Sucessfully connected to destination 'queue:///MMPP.PLM.FGH41? CCSID=37&targetClient=1'_
Line 1 / 1
Processing Details for Cluster Node Server 0 15_92786
Type
Time Stamp
Message ID
Explanation
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d Error while processing message '2e6206f0-7925-11dd-bc02-0003bae50b4d'; _detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ..._
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d XI message ID corresponding to JMS message with ID 'ID:414d512071736431202020202020202047d9462024028b02' will be created as a new GUID with value '2e6206f0-7925-11dd-bc02-0003bae50b4d'
Amith Dharmasiri

Checked the drivers installed in :
/usr/sap/<SID>/DVEBMGS<SYSNO>
/j2ee/cluster/server0/bin/ext/com.sap
.aii.af.jmsproviderlib
They are available and properly added to aii_af_jmsproviderlib.sda.
The drivers are:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
These were installed per OSS note 747601.
Any other suggestions, why retrieving from MQ doesn't work?

How to use File Adapter with hierarchial Structure?

Hi,
How to use File Adapter with hierarchial Structure like..
Data:
--Header Details:
Line Item Details:
Data
Bcoz I am getting a Flatfile in a hierarchial way as shown below.
Header Details :1
Line Item a
Line Item b
Header Details :2
Line Item c
Line Item d
Kishore

Hey Kishore,
In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
check the link for the needed configuration paramters.
If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
If you have any question i'll be more than happy to assist.
Nimrod Gisis

Is snow leopard usb backup drive access much much quicker using firewire than with usb 2.0 ?

is snow leopard usb backup drive access much much quicker using firewire than with usb 2.0 ?

I migrated from a USB2 external hard drive (when it failed) to the Firewire 800 and have not looked back. I also sync from that primary drive to a secondary backup drive (still USB2). Everything I do with the firewire drive is significantly faster than USB2.

I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students.

I have recently update to the OS Maverik and I use a projector with a mini display port adaptor to my MacBook Air, ever since the only thing that projects is my desktop picture. I cannot get it to project my school work that I need to teach my students. Help!

Hi Becki514,
Welcome to the Support Communities!
The following articles may help you with your projector issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Apple Mini DisplayPort adapters: Frequently asked questions (FAQ)
http://support.apple.com/kb/ht3382
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
http://support.apple.com/kb/ht3131
I hope this information helps ....
Have a great day!
- Judy

Mac Book Pro Power Adapter with USB charge ports?

Does anyone make a MBP power adapter with 2 USB charge ports? It seems logical to have one power adapter that charge your MBP, iPhone and iPad all at the same time while minimizing the things one would have to carry on travel.

Hopefully!
I said to them "you dont even need to put the ports on the brick itself, put it on that little wall plug adapter thingy... that way if you only want to charge your iOS devices you can leave the brick in the bag!... Fingers crossed and thanks again for the help tjk!
Best,
David

I have a new Mac with usb 3.0 ports. What type of cable do I use for an old usb 1 printer

I have a new IMac with usb 3 ports. What type of cable do I use for conncting on older usb 1 device?

AFAIK, use the USB 3.0 port to the printer. It should be backward compatible. If not, return the useless computer or get a new printer.

How can I get a video signal using IMAC 27 with only mini display port. I like to send the signal wireless to a TV using a TV/audio transmit system.

I have an IMAC 27 with a mini display port ( only this). I also have all the adapters ( mini display port to VGA, HDMI...).
Since I moved to UAE I like to transmit the signal frm my IMAC ( where I also look German TV on) to my TV. I will do so by using a wireless Transmit receive system with theree cinch inputs ( transmit system ( video, 2x voice).
The distance to the TV IS ABOUT 10m and one wall. I don`t want to use a cable.
Is there any solution for example mini display to VGA + VGA adapter to cinch so I can use the transmit system?
HDMI would also be an optiekn, bat then I have to by another Transmit receive system.
If somebody made already the experience I would appreciate to share the information
Is there may be any store in UAE where to get support. It is very diificult to get good advice here. They sell everything bat can not reaaly explain and have very often no technical knowledge. With this problem nobody until now can help me.
Hans
<Email Edited by Host>

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

870A-G54 - Lost use of of ALL usb 2.0 ports after months no issues

First off I have been using this board for about 6 months with no issues. None what-so-ever. That was until my hard drive failed (it was old anyways.)
I replaced the failed drive and reinstalled Windows 7 x64. Except I was only able to plug my keyboard/mouse into the USB3.0 ports. None of the usb 2.0 ports on the board worked.
I disconnected the USB headers (for my case,) swapped the memory, flashed the bios, and reconnected the all the cables (power, sata, etc..)
On top of that, it takes about 3 full minutes for the system just to post. Usually it took maybe 3 seconds.
I'm stumped. Any thoughts??
Specs below: ( CPUID Link: http://valid.canardpc.com/show_oc.php?id=2004687)
MSI 870A-G54 (MS-7599)
AMD Phenom II X4 955
BIOS: V17.14 08/07/2011
Corsair XMS3 (CMX8GX3M2A1600c9) 1.65V (2 x 4GB)
Radeon HD 4870 Video Card

Quote from: Fredrik on 20-September-11, 01:22:03
Some times Windows gets confused during installation, if there are strange things attached. USB before Windows for example is n o t a good idea.
Use absolute minimum parts for the installation of Windows, no extra USB things, PCI-cards, hard disks, sticks of memory etc. As little as possible!
You can add all things after the installation is completed.
A new Windows installation, then.
This isn't a Windows issue. I can disconnect everything (even the hard drive) and boot with just a monitor and keyboard, and the keyboard will not work to even access the BIOS (DEL key) unless it is in one of the USB3.0 ports.

Using converter/adapter with macbook extension cord'

I'm taking my macbook to the u.k. and want to know if i can use just an adapter with the magsafe extension cord. I already have an adapter for the the magsafe cord but may need to use the extension cord as well.

Yes you can just use a plug adapter. It will work fine either way.

RE: Rollback while using DB Adapter with toplink

Hi All,
I am using DB Adapter's Toplink to insert data in ms-sql table.
In case, If I am inserting 10 records and suppose after 6 record insertion is being failed.
Then in above scenario, Is previously inserted records would be roll backed or not?
Is there any thing, we need to do in BPEL or this would be taken care by Top link.
My version of BPEL: 10.1.3.4.0
Thanks in advance.
Regards

Hi Pavan,
Thanks for your response. My process is Asysc. I did one poc, tested if a data of one record is wrong, then it throwing error, and data is not being inserted in data base.
I tested with 4 records, if data of any records is wrong, then it is not being inserted.
Is there any other good way to handle this.
Regards
Edited by: vikky123 on Sep 22, 2010 8:43 PM

Using HTTP adapter with no namespaces

Hi,
Is there anyway to use HTTP adapter when the provider does not accept the namespaces. The HTTP binding wizard requires a targetnamespace to be defined in the request and response xsds that we have to use.
Thanks & Regards
Siva

Bernd we are trying to do the same thing only with the soap adapter. I'm convinced that no one really knows how to do it. We can't even find an SAP CONSULTANT that has done it .. at any cost!
If you hear anything good .. please let me know - my email is [email protected]
I think the nightmare is coming in because when SAP bought the j2ee ( application server ) they never really have integrated it so it's very confusing if the settings need to be done on the ABAP side or the J2EE side via visual administrator. In addition most Basis guys are only experienced in the ABAP side and not the J2EE.

Using JMS adapter with J2ee native queuing system

Hi there,
As far as I have understood J2EE contains it's own native queuing system (JMS). Since the J2EE is part of the WAS, shouldn't it be possible to somehow use XI's JMS adapter in conjunction with this native JMS?
I've tried to search many places in many ways, but haven't been able to find any info. Is it possible at all?
Hope, some of u guys can help out there:-)
Regards,
Daniel

Hi Keith,
It looks as if you are in the same situation.
We have this working very nicely now and I'm happy to share. In fact I was just granted wiki permissions so I can add the information there along with screen shots.
Informaiton on this configuration is very scattered but I imagine many people would find it useful for integrating with Mainframes without adding any complexity to the legacy environment. Let me come back to you with some more inormation, but for now you can get started with this:
Insert a module as the 3rd line in your Module Processing Sequence to use AF_Modules/MessageTransformBean and give it a key in order to associate with the parameters you will need to type in below. These parameters are very similar to normal XI File adapter parameters.
SAP Note 793922 has more info on the parameters... not the greatest reference I know.
Also this has some info...
http://help.sap.com/saphelp_nw04/Helpdata/EN/57/0b2c4142aef623e10000000a155106/content.htm
I'll try and get some screen shots up on the Wiki.

Using DB Adapter with XMLDB and CLOB

Hi,
with oracle xmldb i can store XMLs in lob or structured storage (s. Oracle® XML DB Developer's Guide 10g Release 2 (10.2) B14259-02).
Now my question:
If want to use a database adapter in the ESB to wake up several BPELs. Is there a functionality how i can transform such a clob into a XML where i can use XSLTs?
The db adapter does only map each column to one xml-tag...
If i try to use a table with xmltype the creation of a database adapter fails with:
"some tables contain columns that are not recognized by the database adapter, so they will captured as strings:
sys_nc_rowinfo$(sys.xmltype)
change teh type of the above columns to that of the closest supported type...."
Message was edited by:
HEWizard

Hi,
To get it working you have to create an AQ-table with payload type xmltype. The xmltype payload data type is available on rdbms 10g and up. If you are on 9i or lower use raw data type. Create a queue inside the AQ-table. I'm not quite sure what's the best scenario for you to the queue with data, but I would imagine that you could create a database trigger on the table you're talking about and enqueue the xml-data (payload) to the AQ-table. Thus using the AQ-table as a staging table for the ESB system.
Next, create an ESB system using an AQAdapter to dequeue the queue (like you did using a DBAdapter). The adapter can handle both single-user and multi-consumer queue's and all data types (raw, xmltype and object types).
Messages are dequeued generally within a second after you commited the transaction.
Kind regards,
H

Using File Adapter with Logical Name

I am creating a file adapter with Logical name. Apart from giving the Logical name is there any other configuration that I am suppose to do on the Web Logic before I start using it?
Thanks in Advance.

After configuring the file adapter, all you need to do is , give the path as a value for the logical name which you have created earlier. That you can do on the file adapter property inspector. There is no need to do anything on the server level. Lemme know
Thanks,
N

USING AC ADAPTER WITH USB 2.0 PORT

Similar Messages

Maybe you are looking for