Using Access and OneDrive

Can I put an existing access database on one drive and work in it simultaneously with another person?

Hi,
My understanding it that you want to share/work Access database via One Drive, am I right? If yes, unfortunately, we can't do it via OneDrive.
If we want to share the Access database , please try the following methods:
Share a split database
Share a database on a SharePoint site
Share a database by using a server
For more detail information, please refer to the following link:
https://support.office.microsoft.com/en-us/article/Ways-to-share-an-Access-desktop-database-03822632-da43-4d8f-ba2a-68da245a0446?CTT=1&CorrelationId=e6202801-2cde-4b9a-b47b-d40c13ce2dee&ui=en-US&rs=en-US&ad=US
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Mess with accounts in OneNote and OneDrive for Business - can't open documents from Office 365

Hello!
[Reposted from
here]
I've got Office 365 subscription (E3) with Office.
I can view and edit OneNote notebooks on Office 365 via browser, but can't open it in OneNote.
The similar problem exists for OneDrive for Business - some libraries are syncing, some cannot - asking for Enter credentials, but when I click - nothing happens.
There were two accounts bound to Office 2013 - personal Microsoft ID as primary account and corporate Office 365 linked to it.
Windows 8.1 corporate profile is linked to Microsoft ID account as well.
Something happen with these accounts after password was changed - it seems like some account information was cached and can't be cleaned.
I tried to uninstall Office and install it - no success.
I cleaned computer with
this utility from Support - no luck.
On other Windows 8.1 computer I created new profile (with Microsoft ID account) - surprise, there are problems there as well.
I deleted all Office15 entries from Credentials Manager - Office asked me about Office 365 login/password - I entered them, it is syncing, Haliluja, but, when Microsoft ID account was linked to Office 365 account in Office - problem appears again.
It seems that Office 2013 uses Microsoft ID credentials for Office 365 content.
I'd like to use Microsoft ID as primary account for Office and link Office 365 account to it, but don't want such problems. It worked fine, but I don't know what happened and how it can be analyzed and fixed.
Update: It seems I localized the problem, but still don't know the solution.
Scenario to reproduce error for me:
1. Create fresh new Corporate/Domain user profile on Windows 8.1 with Office Pro 365 installed on computer with latest updates
2. Go to SharePoint Online and browse some Libraries and OneNote notebooks - all ok
3. Start to sync them using OneNote and OneDrive for Business - ok
4. Link Microsoft Account with Corporate Account in Windows 8.1 - ok
5. Syncing of _some_ (not all) Office 365 libraries and notebooks stop working - errors with access, permissions. I'm trying to enter credentials but this doesn't help
6. Disconnect Microsoft Account and Reboot - all libraries and notebooks of Office 365 work fine again. But OneNote notebooks from OneDrive stop working :)
How I can fix this situation and have Microsoft and Corporate account connected?

Update 2:
I installed PowerShell for SharePoint online cmdlets and found this user using get-SPOUser.
I removed this user using remove-SPOUser -site
https://mysitename.sharepoint.com -LoginName
[email protected]
but when I'm trying to access sharepoint from the browser with Microsoft account credentials - new record for this user is created again and I can see it with get-SPOUser :(
So, problem is still not solved - this user is still can be authenticated (there is no such user in SharePoint site collection, there is no such user profile) and Office 2013 syncing doesn't work for Office 365 due this mess with accounts.
I know that I can remove Sharing with external users from Site Collection and information about these users will be permanently deleted - but I don't want to do this, there are several customers who work with our documents.

Error while accessing a library using content and structure

I have a library having document and folder inside it. When I open the library using content and structure I get an error with a correlation ID. When checked the the logs with Correlation ID got an error message "View 'All Document' does not exist."
'All Document' is name of default view on the library.
When I open the library from view all site content the library is being opened.
Please help!!!

Hello Victoria,
Thanks for the response.
I have tried troubleshooting steps given by you.
Check if the issue occurs with other users. Use another user to access the library in Content and Structure and then compare the results. --
I tried with different users but no luck
Make sure that the user account with issue has permission to view the All Documents view of the library. --
Yes, user Account have the permission
Check if the issue occurs with other libraries in the Content and Structure. If not, I recommend to save the library as
a template including contents and then create a new library based on this template. After that use the new library instead of the old library. --
No other library have this problem. I cannot save the library as template including the contents as the it has many folders and files. The current size of library is 786 MB
Clear cache in the browser or use another browser to see if the issue still occurs. --
tries but issue persists.
Best regards,
Ratnesh

My TC has been working fine. Using WIFI my iMac, ipod touch were able to access the internet. Last night, no internet access and when I plug the router connection in my Mac all is good.

My TC was fine, it supports a Mac and an ipod touch. I have had no issues until last night. Nominternet access, Timecapsule app cannot detect or finf the TC. I have my router cable plugged into my Mac and it's fine. I am using Leopard and have no idea what TC firmware version I am on. The TC does get hot! Any clues?

Firmware downgrade.
Go to the airport menu at the top of the page when you have airport utility open.
The second screen will open over the airport utility.
Now hold down the option key when you select firmware so not just new ones open but also old ones.
You get a warning ..
You proceed.
Now you have your TC with whatever firmware you chose.
That is about as Gumpy as I can do it.

WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)

Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

I am sonu v s from india...i am a apple id user...now i have a problem regarding this apple ID...i forget my apple ID security Qn...so i can't access and purchase any apps by using my apple ID..4 tms i frwd my reqst using itune apps store bt no solutn

I am sonu v s from india...i am a apple id user...now i have a problem regarding this apple ID...i forget my apple ID security question...so i can't access and purchase any apps by using my apple ID..4 times i frwd my reqst using itune apps store but i can't get any solution....many times i my try to call u bt there is no response from ur custmr support group...pls kindly give me any solution

Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

How to backup files to ensure future access and use using a different mac

I recently attempted access backed up data on my LaCie drive from a different Mac notebook. I was blocked. I didn't write down the message, but it essentially advised that the data was locked and I wasn't allowed access. I wasn't given a chance to enter any kind of system password to bypass the lock.
Here is my problem: I recently spilled some wine into my keyboard. Since then, the system has slowed to a crawl and occasionally weird things begin to happen, regardless of which software I am using [eg iPhoto, Quickbooks, idvd, Photoshop, email, and even dashboard]. I know I am very lucky to have any access to my files at all. While I do, I need to back everything up so that I can have access to my files later on. I plan to have my Mac serviced this week. I don't know if it needs to be replaced, or whether it can be repaired.
*+If it can't be repaired, how do I back up my files to ensure future access and use using a different mac?+*

I'll check the example you linked. I appreciate you responding.
I was not trying to boot another system at all. Actually, I was working on a newer mac laptop. I attempted to load a dvd I had created in my idvd on the other mac from the LaCie. I was using a mac because I knew it had all the iLife software I needed in order to work with my idvd components. Honestly though, I don't know if the mac I was using is intel based. I hadn't considered it. Does Apple sell macbooks with intel? No matter.
So, let's see -- I was using the other powerbook to read the LaCie via firewire -- and yes, the LaCie has its own power supply.
If I remember correctly, the denial I received [when attempting to load the idvd file] knew that I had created it. I got the feeling that it wasn't allowing me into the file for security reasons. I just don't remember setting security. Incidentally, I just checked and I do not have a master password set nor do I have FileVault protection turned on.
I'll check that link you sent. Thx again, M~

How do I access and use my Itunes library from a different/new computer?

How do I access and use my Itunes library from a different/new computer? My computer is no longer working, so I need to be able to access my library from my wife's computer.

Your library will only be where you put it. Copy everything from your backup copy of your old computer to the new one.
You can redownload some itunes purchases in some countries:
Download past purchases - Apple Support

How do I access and use my iTunes library on a different computer?

How do I access and use my i Tunes library on a different computer?

The iTunes library is only where the user puts it. If desired to have on an additional computer, put it there by copying the ENTIRE iTunes folder from the existing computer to the new computer.

I used to able to access and listen to my itunes library from my ipad using the remote app but this no longer works. I am connected but sound thru ipad. Is this because of they want us to use itunes match

I used to able to access and listen to my itunes library on my ipad using the remote app but this no longer works. I am connected but sound thru ipad- just controls my library on iMac. Is this because of they want us to use itunes match

That has nothing to do with iTunes match. The Remote app on iPad can control the computer's iTunes but not play content from iTunes on your iPad.
To play for example iTunes imusic on iPad
You need to have Home Sharing On.
Check Settings > Music > Home Sharing (key in your Apple ID & password here, must be the same on computer's iTunes)
Start iPad's Music app, tap the ... More (bottom right), tap Shared.
Choose your iTunes' library and have fun.

Client remote Authentication using JAAS and EJB Access

Hi,
I have a problem using JAAS in combination with Sun One Appserver 8.1 and a java remote client trying to access an EJB. Here is the scenario:
I have implemented an EJB who's methods are protected through the deployment descriptor:
        <assembly-descriptor>
             <security-role>
                <description>role for clients outside of the server </description>
                <role-name>sedna</role-name>
              </security-role>
            <method-permission>
              <role-name>sedna</role-name>
              <method>
                <ejb-name>ServerInfoBean</ejb-name>
                <method-intf>Remote</method-intf>
                <method-name>*</method-name>
              </method>
            </method-permission>
            <method-permission>
              <unchecked/>
              <method>
                <ejb-name>ServerInfoBean</ejb-name>
                <method-name>getVersion</method-name>
              </method>
              <method>
                <ejb-name>ServerInfoBean</ejb-name>
                <method-name>create</method-name>
              </method>
            </method-permission>
        </assembly-descriptor>I've deployed the EJB in a jar file which was packed into an ear file of a bigger application. The role has been mapped to the admin Principal in the sun-ejb-jar.xml descriptor.
I can find the EJB, create it, and call the unchecked method getVersion and that works fine, so far so good.
But then I try to access another method which is protected and then I get this exception
org.omg.CORBA.NO_PERMISSION:   vmcid: 0x2000 minor code: 1806 completed: Maybe
        at com.sun.enterprise.iiop.POAProtocolMgr.mapException(POAProtocolMgr.java:179)
        at com.sun.ejb.containers.BaseContainer.postInvoke(BaseContainer.java:853)
        at com.sun.ejb.containers.EJBObjectInvocationHandler.invoke(EJBObjectInvocationHandler.java:137)
...I have to mention that I do make a login via the LoginContext. My jaas.config File has a reference to the com.sun.enterprise.security.auth.login.ClientPasswordLoginModule module.
After login (which works perfectly) I lookup the context with a corbaname url which - if I understood it right - ignores the Context.SECURITY_PRINCIPAL and Context.SECURITY_CREDENTIALS settings.
After that I make the calls to the EJB. And I am allways ANONYMOUS on the server side, which is definitely the problem. Because ANONYMOUS is not allowed to call the protected EJB Methods. But I made a jaas login in advance. So where am I making a mistake???
Am I doing something wrong?
Need help! Thx,
Stephan

Hi.
I understand correctly that you call Subject.doAs on
the client to call the remote EJB. I guess It isn't
right way.I had also a bad feeling about this, so I forget it. But anyway it wasn't working with or without using that doAs().
>
>
Subject contextSubject =
Subject.getSubject(AccessController.getContext());
contextSubject.getPrincipals();This code throws exceptions in the Appserver. Unfortunately they are catched somewhere so I'm unable to find out what was going wrong. But I guess, that these exceptions where security exceptions. Never the less thanks for the hint!
But I don't think that doing the check on the server side is the way I want to go because that is programmatically security and I want to use the declarative security which can be used through the deployment descriptor. If used correctly - and supposed I do not completely misunderstand the specification - then it should be possible to create an EJB that is protected via it's deployment descriptor and access it through the client only if the client has been authenticated through JAAS mechanisms. After successful authentication the principal should be accessible through the EJB context but not for security check, that should allready been done at this time.
Unfortunately I don't find any resource on the internet describing the scenario in such a detail that I can reproduce it. There are only very high level documentations and hints in forums.
Again, thanks for your effort,
Stephan

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

How do I access and use my main computer over my local network ?

I have a wireless internet connection that currently runs from the outside antenna into the house via ethernet. My internet provider is setting up a second wireless system so that a computer 1/2 mile away can share the connection. I believe they are going to run the signal from my existing antenna into a router that will connect to the ethernet wire to my house and to an access point that will shoot a signal from a second antenna to my computer 1/2 mile away.
I'd like to know the best way to access the computer in my house from the one 1/2 mile away.
I'd like to be able to access and use files on my home computer so that all changes are kept on it. I'd also like to access any e-mail messages that Mail has recieved.
My ISP said that they would have to enable VPN.
I'd like to know if enabling file sharing would be enough, or do I need this Vine program I've read about on this forum, or do I need to set my home computer up as a server, or do I need to do something else ?
I've read about lots of stuff but don't understand any of it very well.
Any suggestions would be appreciated.
Thanks
1.3 Mhz Cube Mac OS X (10.4.9)

But why pay for a solution. You can do the same thing with "Share My Desktop" and "Chicken of the VNC".

Using Access and OneDrive

Similar Messages

Maybe you are looking for