Using Access HW VI's in LabVIEW 7.0

hi All,
when I was Using LV 6.1 I was able to read a Key value directly from the keyboard using the "In port" VI after installing the "Access HW" Libraries which replaced the original "In port" and "Out port" VI's that cames with LabVIEW.
now I'm trying to do the same on LV 7.0 over Windows XP but with no succcess either with the VI's implicit on LV  7.0 or replacing them installing the Access HW libraries.
did some body had success using those????

see here and here.  This should put you on the road to success.  It will take a bit of playing, but this is easily done.
Paul <--Always Learning!!!
sense and simplicity.
Browse my sample VIs?

Similar Messages

  • Using access with 64 bit labview

    Hello,
    I have 64 bit version of Labview, and I want to use an access database.  I used the internal search for examples, and it showed an example in examples/comm/access.llb.   Well, that does not exist with this install.  (I did a 32 bit install, and they exist.)
    Has anyone have success with 64 bit LV and access?   Any links to where to start...  Just need a nudge in the right direction.  
    -- brett

    Thanks for that suggestion Ian.
    I've looked through our documentation on 64-bit compatibility for LabVIEW and it looks like you are correct, that should not have installed. What I didn't realize was that the test machine I was using also had 32-bit labview, so the example finder located all of those examples.
    Is there any reason you cannot use the 32-bit version of LabVIEW? At the moment, that is the best option we have for internal compatibility, as most toolkits have not been ported to the 64-bit version of LabVIEW, even though they can run on a 64-bit operating system.
    Past that, I've taken a look at Ian's suggestion and it seems like a pretty solid thing to try, along with the API in the second post of that thread.. Let us know if it works for you.

  • How can I use a non-NI card in LabVIEW RT environment

    We built up a LabVIEW RT environment with LabVIEW 7.1 and relating drivers. There is a problem that we use some non-NI cards in this system and we did not know how to install the dll driver.
    Could you give me some ideals?
    Thanks a lot!!
    Regards,
    Yang Xin

    As it states in the LV RT User Manual - Appendix A (7.0) you might get more info on ni.com/info with info code RTDRVS.
    What kind of instrument/io-/bus-cards are you using?
    As I thought the VI calling the DLL would download the dll to the RT target automatically when run the VI. However, there are probably some restrictions (e.g. Call Library Nodes that access an operating system API other than Pharlap).
    In the 7.0 release notes it is mentioned: When building a start-up application that uses shared libraries (DLLs) with the LabVIEW Application Builder, LabVIEW opens the DLLs Used by Application dialog box and lists the DLLs used by the application. Some DLLs might report the following error:
    Target OS fails to load this DLL
    Ignore the warning and click th
    e OK button if you already transferred the DLL to the RT target. If you have not transferred the DLLs to the target, FTP the DLLs to the /ni-rt/system directory of the RT target.
    Note as well: Why Does My DLL Call Cause My LabVIEW Real-Time VI to Fail to Download?
    Let us know.
    Roland
    PS: These are links to start with.
    Developing a LabVIEW Real-Time Driver for a PXI or Compact PCI Device
    Configuring LabVIEW Real-Time and NI-VISA to Recognize a Third Party Device
    Using VISA to Write Drivers Supported in LabVIEW Real-Time for Thi
    rd Party PXI Cards.
    Programming for the LabVIEW Real-Time Module Using LabWindows/CVI

  • WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions

    I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
    We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue.  NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).  
    Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
    This is the 2nd time it happened with 2 different models.
    Please help ASAP.
    Thank you,
    Lance
    (Mod note: Edited post. Some parts off topic.. Thanks!)

    Also,  you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • CRM_MKTPL_CAMPTYPE data element use access error in z-table

    Hi Friends,
    I am using CRM_MKTPL_CAMPTYPE data element in my z-table for one z-field. While activating the z-table I am getting the folowing error.
    The Object Table Zxxx uses Data element CRM_MKTPL_CAMPTYPE, Package Zxxx does not have sufficient use access.
    Can anyone help me to resolve this issue.
    Thanks in advance.

    Hi Vishal,
    Thanks for your quick response.
    I added "SAI_TOOLS" in Package Interface Tab but I am getting the following error "Package interface SAI_TOOLS available already".
    I was tried with other option adding SAI_TOOLS in Use access Tab from the previous posts. But it didn't wok for my case. I think we need to add similar kind of Package Interface which is related to CRM Campaign.
    If any one face this kind of issue please respond to this post.
    Thanks.

  • Using pixelink software development kit with labview

    hi,
    i am currently using the pixelink camera pl b741 f, however i am facing a problem when i use the "get frame dll" in labview.
    my program works when in highlight execution mode, however when i run it in normal mode i get the following message:
    Labview: an exception occurred within the external code called by a library node function node. This might have corrupted labview's memory. Save any work to a new location and restart labview. VI "amol_getimage.vi" was stopped at node "" at a call to "MEPU- acquisition-getframe .vi"
    can you please help me!
    thanks
    amol

    amolchoudhary wrote:
    hi,
    i am currently using the pixelink camera pl b741 f, however i am facing a problem when i use the "get frame dll" in labview.
    my program works when in highlight execution mode, however when i run it in normal mode i get the following message:
    Labview: an exception occurred within the external code called by a library node function node. This might have corrupted labview's memory. Save any work to a new location and restart labview. VI "amol_getimage.vi" was stopped at node "" at a call to "MEPU- acquisition-getframe .vi"
    can you please help me!
    It's simple! You made an error in the configuration of your Call Library Node. It could be a number of reasons but the two most likely ones are that you get a variable wrong to be passed by Value while it should be by Reference or vice versa, or that you call the function which expects a buffer it can write in the results (the image frame is a likely candiate) and didn't create a large enough buffer in LabVIEW to be passed to the function.
    I actually think this last one is by far the most likely reason here and in fact the number 1 error done by most people that try to interface to a DLL through the Call Library Node. DLLs come from the C world and want to be called like that and one important rule there is that memory buffers to be filled, must always be created by the caller. This is different in LabVIEW itself since LabVIEW manages all the memory for you and allocates it whenver necessary but this can't work for calling DLLs as LabVIEW has ABSOLUTELY no way to know what a DLL function might need as memory buffer.
    You can create such a buffer by either executing the Initialize Array function with the correct parameters or in LabVIEW 8.2 you can directly configure array and string parameters in the Call Library Node configuration to create the necessary buffer. I prefer the Initialize Array variant since the other one is a LabVIEW 8.2 only feature and creates a fixed size buffer while for your frame buffer you will likely have to allocate a memory buffer whose minimum size depends on the bitmap format and bitmap size the function is going to return.
    Rolf Kalbermatter
    Message Edited by rolfk on 06-29-2007 07:27 PM
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Problems using access control in sender agreement for SOAP adapter 7.1

    I am trying to use Access Control Lists to restrict user access to web services/interfaces which are exposed via PI. This can be configured via the Integration Builder Directory using the u201CAssigned Usersu201D tab of both Communication Components (Business System) and Sender Agreements.
    The configuration is via the above mentioned components. However, I understand that itu2019s the adapters which at runtime are responsible for actually applying these checks.
    I have been having problems getting the access control to work using a setup involving a SOAP adapter of type SAP BASIS 7.10.
    The symptom of the problem is that although the access control works as expected at the Business System level, any settings at the Sender Agreement level appear to have absolutely no effect whatsoever.
    I have confirmed that I have no problems if I use an adapter of type SAP BASIS 7.00. However, I really need to get this working on 7.1.
    I have looked on the SAP support portal but can not find any notes that relate to this.
    Has anyone else had a similar problem? And have you found a fix for it?
    Any suggestions would be welcome.
    Edited by: Malcolm Dingle on Jun 17, 2009 1:08 PM

    Hi Shai,
    Please have a look at the following link and see if it helps you .
    It deals with SOAP adapter installation and activation 
    Re: SOAP adapter installation and activation
    Best Regards
    Edited by: Prakash Bhatia on May 8, 2009 11:51 AM

  • Using access keys in inactive frames

    We are trying to make an existing website DDA compliant and want to use access keys to assist the keyboard-only user to navigate without a mouse. The site uses frames; we cannot change that as some 6000 pages are involved.
    We have implmented access keys in one of the 3 frames. This works fine in Internet Explorer and Firefox regardless of which frame you are on. However Safari does not see the access keys unless you are actually on the active frame. The thing is that we want to use the acess keys to navigate between frames.
    Is there anyway that we can get Safari to behave the same as IE and FF?

    For 1: you can try and access the af:query component and call getChildren() to see if you can get a hold of inner components (e.g. buttons). By default, the access key for the advanced mode button is not exposed.
    For 2) Same as for 1. This is not exposed and all you can do is to check if getChildren issued on the RichPanelCollection component reference allows you to access the command button and then set the access key to it
    Meanwhile I'll file an ER to make access keys generally accessible for change (which however may take time before this gets implemented)
    Frank

  • Is there a time limit for how long a free form can be used/accessed?

    Is there a time limit for how long a free form that is created can be used/accessed, or is it soely dependent upon when the 50 respondent max has been reached?  I am creating a form now, that will likely be distributed in early January, and I want it to be accessible through the end of June, 2013.  (I am simply using the option to create a single form for free- not the 30-day trial). 

    There is no time limit. The limit is the 50 responses.

  • Package does not have sufficient use access

    Hi,
    I am trying to generate a client proxy(using SPROXY, enetered Package name, Prefix, Request number-> and click on Complete) but while activating client proxy i am getting this exception:
    "Package ZBI_FI does not have sufficient use access"
    Note: ZBI_FI is a package name under which i am generating my proxy. Infact if i choose someother package(like ZBI_PI etc) even then also i ma getting the same error.
    This is a package related issue or some roles need to be assigned on my userId???
    Please help.
    Thanks
    Amit

    Amit,
    check tcode su53 as soon as you execute sproxy to see if there is any authorisation issue
    check this thread
    Re: PACKAGE ZCRMFSBP does not have sufficient use access.
    Thanks
    Bala Duvvuri

  • Issue in OIM 11gR2Ps2 while provisioning using access policies

    Hi,
    we  are provisioning resources using access policies, we  are facing any issue while provisioning resource using two access policies. we are populating the main process form data using two access policies, according to  the access policy priority we are seeing the first access policy form data value in the user process form, but the second access policy value is not showing in the user process form, for example we are populating processform  fieldvalue1 using access policy1 and processform fieldvalue2 using access policy2.
    Thank you,

    Hi,
    we are facing issue in the following scenario
    we are provisioning a resource based on the user position through access policies, for example  a user  position "contractor" is satisfies two rules based on the rules he will get two roles, these two roles trigger two access policies, and two access policies giving same resource for example "AD", in AD main  process form there two lookups(lookup A,lookup B), we are giving looukp A value in acess policy1 and lookup B value in access ploicy2, when ever user gets AD resource through these roles, after provisioning when we see the user process form only lookup A value is there and lookup B is empty.But i want to get both lookup A,lookup B values, what i observed was based on the  priority access policy values are comming to user resource form, the next access policy form values are not reflecting the user process form.
    Thanks,

  • Extreme mouse cursor lag when using Accessibility Zoom (Fullscreen) in Yosemite

    I have a Retina MacBook Pro running OS X Yosemite (10.10), clean installed, connected to an external Thunderbolt Display. When I zoom in using Accessibility, I experience a very prominent lag, moving my mouse cursor (either with my Magic Mouse or Magic Trackpad or the built-in Trackpad) around or when zooming out. It is especially visible when zoomed in on applications like Calendar and Mail. This never happened in Mavericks. My settings are as follows.
    I've tried creating a new user account on my Mac and the problem still persists, which leads me to believe it's a bug with Yosemite.
    Anyone else have the same problem?

    I also have the same exact problem. I have a i5 iMac Mid 2011 with an upgrade to 10.10 Yosemite connected to an external display. I like you never had this issue with Mavericks. Zoom is so painfully slow now that I had to disable it. My iMac has 12 GB of RAM and even with no apps opened, zoom is killer slow.. makes me want to punch a wall-kinda slow.
    I think it's clear to say that something is up with 10.10.. some bug.
    Apple please fix us zoomers

  • How to use access database

    is it possible to use access database in visual basic 2012

    Hello,
    There are two main methods for working with MS-Access databases in Visual Studio with VB.NET. One method you go through several steps which the IDE data wizard creates strong typed classes and assist with binding fields in the database table to controls
    such as a DataGridView, ListBox, TextBoxes etc. The second method you actually write all the code which can go in two different directions.
    Which one to pick is dependent on your expertise in general with VB.NET. Both have advantages and disadvantages.
    The following shows the beginnings of working with data wizards in the IDE while
    this page is an index for the link just provided with a mixture of examples.
    If open to suggestion and dependent on your needs please consider looking at using SQL-Server since there is an Express version of SQL-Server installed with Visual Studio. SQL-Server is overall and better choice but does not mean it's best for you at this
    time but worth considering.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
    but do not reply to forum questions.

  • How to use access keys in 10g

    hi,
    i have migrated my form from 4.5 to 10g
    but i am not able to use access keys
    Please help...
    thanks in advance
    smdedp

    Do you mean system-related access keys or custom-related...????
    Sim

  • SSRS report using Access database in SharePoint.

    Dear All,
    I have created SSRS report using Access database. I have successfully deploy SSRS report in SharePoint document library.
    When I am opening the same report I am getting following error.
    Can anyone please help me how to resolve this issue ?
    Error:
    An error has occurred during report processing. (rsProcessingAborted)
    Cannot create a connection to data source 'WOW'. (rsErrorOpeningConnection)
    ERROR
    [IM014] [Microsoft][ODBC Driver Manager] The specified DSN contains an
    architecture mismatch between the Driver and Application
    Thanks,
    Harish P

    This seems odbc driver issue ,Plz check the follwoing links for the solution
    http://social.technet.microsoft.com/Forums/sqlserver/en-US/a4ddb239-64d8-4074-978c-45c30381c107/ssrs-2012-error-im014-microsoftodbc-driver-manager-the-specified-dsn-contains-an-architecture?forum=sqlreportingservices
    http://social.msdn.microsoft.com/Forums/en-US/a4ddb239-64d8-4074-978c-45c30381c107/ssrs-2012-error-im014-microsoftodbc-driver-manager-the-specified-dsn-contains-an-architecture?forum=sqlreportingservices
    Please Mark it as answer if this reply helps you in resolving the issue,It will help other users facing similar problem

Maybe you are looking for