Using Adapter with Cordless Phone
Hi everyone! My family and I are going to live in South America next week and need help deciding whether to buy the Skype Adapter or the Dual phones. If we use the adapter and get an online number, if someone calls our online number, can we answer the call on our cordless phones?
Also, does anyone know if the adapter has to be connected to the computer to make calls?
Thank you!!!
Howdy, I think it's unlikely you'll be able to do what you want. There haven't been any new phone drivers for Palm OS devices issued since the 2005 Phone Link Update, and the Palm OS is essentially dead so there won't be any new drivers written.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android
Similar Messages
-
How to configure for GPlus Adapter with SAP Phone and SAP CRM
Hi All Basis Adm,
Please consider as an urgent basis i need the information that how to configure GPlus Adapter with SAP Phone and SAP CRM . My server is CRM 5.0 (kernel 7) with Oracle Database. This information is require to connect Webclient to Sap Phone with GPlus Adapter (Genesys Adapter 7.1). If u have any document regarding mentioned above than that will be acceptable.
Regds,
GovindaHi Prasad,
In you case, it's a file to file scenario.
Go thro' this link for a solution:-
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
Regards.
Praveen -
Hi guys, so we have 2 iPhones in my house, both on the same Apple ID so that my mum and I can share everything. I have just got an iPad mini, and would like to use iMessage on it with my phone number, but the iPad only picks up other more recently added number (not mine, my mums) when I go to message settings. Is there a way to make the iPad default to other number?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Troubleshooting Messages http://support.apple.com/kb/TS2755
Cheers, Tom -
Skype phone number with cordless phone
Has anyone used this? How is the quality and how much does it cost to make calls worldwide? I currently use Skype when I can (when the other party has Skype), but I have Vonage with my small business and I need to make international calls. I am trying to decide if it would be smart to switch to the Skype phone service. Any advice/help would be great. Thanks.
ejgroff wrote:
Has anyone used this? How is the quality and how much does it cost to make calls worldwide? I currently use Skype when I can (when the other party has Skype), but I have Vonage with my small business and I need to make international calls. I am trying to decide if it would be smart to switch to the Skype phone service. Any advice/help would be great. Thanks.
Yes, please see this: http://community.skype.com/t5/Other-devices/Use-Your-Own-Phone-Device-Router-Based/td-p/123156
About Me You can also use a IP Camera as your camera for Skype video Example Instructions -
Interferance with cordless phone
My Airtunes cuts out frequently while on the cordless phone. I have tried all the different settings (channels, robust signal, etc.) in the Airport Utility. Any suggestions?
I don't use it for my internet. Only for Airtunes.Hello Steve Hoiberg. Welcome to the Apple Discussions!
Unfortunately, not many choices here. I am assuming the your cordless phone operates on the 2.4 GHz radio band. If so, here are a few things to try:
o Change radio channels on the AirPort Express Base Station (AX)
o Change radio channels on the cordless phone (if it offers this option)
o Relocate the cordless phone's base station.
o Replace your cordless phone for one that operates in either the 900 MHz or 5 GHz band. -
WRT54G interference with cordless phone
I have a WRT54G wireless router. I have changed the channel setting several times so it would not interfere with my 5.8GHZ phone. Still messes up my phone. Any suggestions?
Try using the Channel 11 ... also go to advance wireless settings & Change the Beacon Interval to 75 >>Change the Fragmentation
Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" ....
See if it still interferes with your phone .... -
Anyone actually use bluetooth with their phone?
So i have recently discovered that the less i deal with my phone directly the better my quality of life should be. I have deleted pretty much all the bs social networking apps from my phone and try my damndst to keep my eyes off of the screen. But the problem lies with my phone - the actual phone part- i get a lot of calls per day for business and well, i hate it. Good for business but bad for my anti phone phase. A buddy of mine got me off of the iOS band wagon and into the android eco system a while back and uses a blueant q2, now i would like to take his word for it and im sure i can, but im intesteed to know what the what the community uses, if any....
Ectophile wrote:
I've got a really basic phone that cost me £16. No Bluetooth, no WiFi, no apps. It's not even got a camera. The number is ex-directory, so the only people who can phone me are the ones I give my number to.
I had similar for years and was happy with it, but I suddenly decided to get a decent smartphone just because it was there. By no means essential but it is handy now and then for info on the fly. £10 a month for a supermarket SIM that provides way more than I need is a reasonable running cost, though if I ever get close to my 5000 texts a month I'll refer myself to a shrink.
You can click the white star next to this message if you think it was helpful. -
I want to preorder the iPhone 5s. My personal phone number is not eligible for an upgrade yet, but my day's phone number is. He says that I can use his upgrade. On September 20, 2013 when the online preorder begins, am I able to preorder a phone for myself with my dads number and use it with my own number? How does it all work?
Most carriers will allow you to swap phones between numbers without a problem. Swapping will not change the contract on the number that the phone was ordered for. Nor will it affect eligibility for future upgrades. Of course the "swap" will normally need to be done with phones on the same carrier and is probably easier to do when on the same account.
I do this every year, or rather every other year. I am the techie, my wife not so much. So when the new iPhone comes out, I get it for which ever number is eligible for upgrade and have it activated to my number and then activitate my old phone to her number. I usually go to the phone company store (AT&T in my case) as they have new sims on hand and usually need to use at least one. -
Airtunes audio drop with cordless phone call
... is this normal behavior? I kinda don't mined since it's like an automatic mute (although I need to hit play again in iTunes after the phone call). Just wondering if there are configuration options to change this. Maybe switching channels?
Changing channels may help.
Some cordless phones operate on the sam 2.4GHz frequency as Airport and therefore can cause interference.
iFelix -
Impossible to use mAb with Alcatel phone
Hello
I try to configure mab authentication with alcatel Phone "ipTouch".
The radius is an ISE version 1.2.1
It is impossible to autenticate with mab.
On the Ise the error is:
"Event 5434 Endpoint conducted several failed authentications of the same scenario"
" Failure Reason 11514 Unexpectedly received empty TLS message; treating as a rejection by the client"
On the switch the error message is:
2960-09#
Dec 15 11:13:50.090: %AUTHMGR-5-START: Starting 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %MAB-5-FAIL: Authentication failed for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %AUTHMGR-7-RESULT: Authentication result 'no-response' from 'mab' for client (0080.9fc8.a9eb) on
Interface Gi1/0/11 AuditSessionID 0A0A510A0000010A2E95860F
Dec 15 11:13:50.125: %AUTHMGR-7-FAILOVER: Failing over from 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11
AuditSessionID 0A0A510A0000010A2E95860F
2960-09#
Dec 15 11:13:50.125: %AUTHMGR-5-START: Starting 'dot1x' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID
0A0A510A0000010A2E95860F
Here is the switch config
+++++++++++++++++
interface GigabitEthernet1/0/11
description HOST PORT WITH AUTHENTICATION
switchport access vlan 68
switchport mode access
switchport nonegotiate
switchport voice vlan 78
authentication event server dead action reinitialize vlan 68
authentication event server dead action authorize voice
authentication host-mode multi-auth
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer restart 300
authentication timer reauthenticate server
authentication timer inactivity server
mab
dot1x pae authenticator
dot1x timeout tx-period 5
spanning-tree portfast
end
global switch config
+++++++++++++++
aaa new-model
aaa authentication login default local group radius
aaa authentication dot1x default group radius
aaa authorization exec default local group radius
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 10.1.30.11 server-key 7 023201575A080B34080F
client 10.1.30.12 server-key 7 122D001B430508116E6A
dot1x system-auth-control
dot1x critical eapol
radius-server attribute 6 on-for-login-auth
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 1 tries 3
radius-server host 10.1.30.11 auth-port 1812 acct-port 1813 key 7 0030160A55550F134B60
radius-server host 10.1.30.12 auth-port 1812 acct-port 1813 key 7 0030160A55550F134B60
radius-server deadtime 1
radius-server vsa send accounting
radius-server vsa send authentication
Could you please help me.
Michel MisonneHi
Yes the mac is in the Identity endpoint.
During this night, the Phone reboot and now it is OK !!!
I do not know why ?
I changed nothing !
But here is the debug.
Also the ise is configured with authentication protocol Pap-Ascii = Enable
and "Calling stat id" and "Check pass" checked."
The onfig of the phone is
-Mac to login
-MD5 profile = OFF
-Tls Profile OFF
Her is te debug. ( when it works well)
conf t
Enter configuration commands, one per line. End with CNTL/Z.
2960-09(config)#endshutdown int gigabitEthernet 1/0/11
2960-09(config-if)#no shu
2960-09(config-if)#no shutdown
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#
2960-09(config-if)#end
2960-09#
Dec 16 08:33:54.962: %ILPOWER-7-DETECT: Interface Gi1/0/11: Power Device detected: IEEE PD
Dec 16 08:33:56.157: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/11: Power granted
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
Dec 16 08:33:56.241: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to down
Dec 16 08:33:56.322: %SYS-5-CONFIG_I: Configured from console by admin on vty0 (10.10.68.4)
2960-09#
Dec 16 08:34:02.924: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to up
Dec 16 08:34:03.924: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to up
2960-09#
Dec 16 08:34:05.088: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to down
2960-09#
Dec 16 08:34:06.095: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to down
2960-09#
Dec 16 08:34:09.800: %AUTHMGR-5-START: Starting 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.800: RADIUS/ENCODE(0000025F):Orig. component type = Dot1X
Dec 16 08:34:09.804: RADIUS(0000025F): Config NAS IP: 0.0.0.0
Dec 16 08:34:09.804: RADIUS(0000025F): Config NAS IPv6: ::
Dec 16 08:34:09.804: RADIUS/ENCODE(0000025F): acct_session_id: 597
Dec 16 08:34:09.804: RADIUS(0000025F): sending
Dec 16 08:34:09.804: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:09.804: RADIUS(0000025F): Sending a IPv4 Radius Packet
Dec 16 08:34:09.804: RADIUS(0000025F): Send Access-Request to 10.1.30.11:1812 id 1645/198,len 249
Dec 16 08:34:09.804: RADIUS: authenticator D3 5F 99 C6 EE 9F 9F 96 - 7C 1B A1 B9 32 1C 78 61
Dec 16 08:34:09.804: RADIUS: User-Name [1] 14 "00809fc8a9eb"
Dec 16 08:34:09.804: RADIUS: User-Password [2] 18 *
Dec 16 08:34:09.804: RADIUS: Service-Type [6] 6 Call Check [10]
Dec 16 08:34:09.804: RADIUS: Vendor, Cisco [26] 31
Dec 16 08:34:09.804: RADIUS: Cisco AVpair [1] 25 "service-type=Call Check"
Dec 16 08:34:09.804: RADIUS: Framed-IP-Address [8] 6 10.10.78.250
Dec 16 08:34:09.804: RADIUS: Framed-MTU [12] 6 1500
Dec 16 08:34:09.804: RADIUS: Called-Station-Id [30] 19 "F0-9E-63-E7-E1-8B"
Dec 16 08:34:09.804: RADIUS: Calling-Station-Id [31] 19 "00-80-9F-C8-A9-EB"
Dec 16 08:34:09.804: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.804: RADIUS: 5F 60 06 35 54 F6 CB 60 3A D6 A9 87 92 F0 0D 70 [ _`5T`:p]
Dec 16 08:34:09.804: RADIUS: EAP-Key-Name [102] 2 *
Dec 16 08:34:09.804: RADIUS: Vendor, Cisco [26] 49
Dec 16 08:34:09.807: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A0A510A0000011E3329AE1E"
Dec 16 08:34:09.807: RADIUS: NAS-Port-Type [61] 6 Ethernet [15]
Dec 16 08:34:09.807: RADIUS: NAS-Port [5] 6 50111
Dec 16 08:34:09.807: RADIUS: NAS-Port-Id [87] 23 "GigabitEthernet1/0/11"
Dec 16 08:34:09.807: RADIUS: NAS-IP-Address [4] 6 10.10.81.10
Dec 16 08:34:09.807: RADIUS(0000025F): Started 5 sec timeout
Dec 16 08:34:09.856: RADIUS: Received from id 1645/198 10.1.30.11:1812, Access-Accept, len 283
Dec 16 08:34:09.856: RADIUS: authenticator BC 72 21 F4 37 7D BE B1 - 03 A7 CE F3 3A DB EE DA
Dec 16 08:34:09.856: RADIUS: User-Name [1] 14 "00809fc8a9eb"
Dec 16 08:34:09.856: RADIUS: State [24] 40
Dec 16 08:34:09.856: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 41 [ReauthSession:0A]
Dec 16 08:34:09.856: RADIUS: 30 41 35 31 30 41 30 30 30 30 30 31 31 45 33 33 [0A510A0000011E33]
Dec 16 08:34:09.856: RADIUS: 32 39 41 45 31 45 [ 29AE1E]
Dec 16 08:34:09.856: RADIUS: Class [25] 54
Dec 16 08:34:09.856: RADIUS: 43 41 43 53 3A 30 41 30 41 35 31 30 41 30 30 30 [CACS:0A0A510A000]
Dec 16 08:34:09.859: RADIUS: 30 30 31 31 45 33 33 32 39 41 45 31 45 3A 6D 65 [0011E3329AE1E:me]
Dec 16 08:34:09.859: RADIUS: 67 61 74 72 6F 6E 2F 32 30 37 35 39 38 39 38 34 [gatron/207598984]
Dec 16 08:34:09.859: RADIUS: 2F 34 31 30 [ /410]
Dec 16 08:34:09.859: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.859: RADIUS: 51 E9 8C 07 61 A4 F0 02 0C DC DF 1F 25 BE 39 A3 [ Qa?9]
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco [26] 34
Dec 16 08:34:09.859: RADIUS: Cisco AVpair [1] 28 "device-traffic-class=voice"
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco [26] 75
Dec 16 08:34:09.859: RADIUS: Cisco AVpair [1] 69 "ACS:CiscoSecure-Defined-ACL=#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.859: RADIUS: Vendor, Cisco [26] 28
Dec 16 08:34:09.859: RADIUS: Cisco AVpair [1] 22 "profile-name=Unknown"
Dec 16 08:34:09.859: RADIUS(0000025F): Received from id 1645/198
Dec 16 08:34:09.859: RADIUS/DECODE: parse unknown cisco vsa "profile-name" - IGNORE
Dec 16 08:34:09.859: %MAB-5-SUCCESS: Authentication successful for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.863: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:09.894: RADIUS/ENCODE(00000000):Orig. component type = Invalid
Dec 16 08:34:09.894: RADIUS(00000000): Config NAS IP: 0.0.0.0
Dec 16 08:34:09.898: RADIUS(00000000): sending
Dec 16 08:34:09.957: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:09.957: RADIUS(00000000): Sending a IPv4 Radius Packet
Dec 16 08:34:09.957: RADIUS(00000000): Send Access-Request to 10.1.30.11:1812 id 1645/199,len 147
Dec 16 08:34:09.957: RADIUS: authenticator 1B D7 D2 13 EF 69 36 E2 - 87 4D A9 69 2A F7 29 4D
Dec 16 08:34:09.957: RADIUS: NAS-IP-Address [4] 6 10.10.81.10
Dec 16 08:34:09.957: RADIUS: User-Name [1] 41 "#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.957: RADIUS: Vendor, Cisco [26] 32
Dec 16 08:34:09.957: RADIUS: Cisco AVpair [1] 26 "aaa:service=ip_admission"
Dec 16 08:34:09.961: RADIUS: Vendor, Cisco [26] 30
Dec 16 08:34:09.961: RADIUS: Cisco AVpair [1] 24 "aaa:event=acl-download"
Dec 16 08:34:09.961: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.961: RADIUS: E7 15 BB FB 7B 5B 1A C4 50 FC E7 0E 10 AC 22 36 [ {[P"6]
Dec 16 08:34:09.961: RADIUS(00000000): Started 5 sec timeout
Dec 16 08:34:09.968: RADIUS: Received from id 1645/199 10.1.30.11:1812, Access-Accept, len 209
Dec 16 08:34:09.968: RADIUS: authenticator FA 03 DD C1 D2 87 6B 58 - 99 65 EE 96 FF D5 76 FD
Dec 16 08:34:09.968: RADIUS: User-Name [1] 41 "#ACSACL#-IP-PERMIT_ALL_TRAFFIC-537cb1d6"
Dec 16 08:34:09.968: RADIUS: State [24] 40
Dec 16 08:34:09.968: RADIUS: 52 65 61 75 74 68 53 65 73 73 69 6F 6E 3A 30 61 [ReauthSession:0a]
Dec 16 08:34:09.971: RADIUS: 30 31 31 65 30 62 30 30 30 30 30 30 37 38 35 34 [011e0b0000007854]
Dec 16 08:34:09.971: RADIUS: 38 46 45 45 38 31 [ 8FEE81]
Dec 16 08:34:09.971: RADIUS: Class [25] 54
Dec 16 08:34:09.971: RADIUS: 43 41 43 53 3A 30 61 30 31 31 65 30 62 30 30 30 [CACS:0a011e0b000]
Dec 16 08:34:09.971: RADIUS: 30 30 30 37 38 35 34 38 46 45 45 38 31 3A 6D 65 [00078548FEE81:me]
Dec 16 08:34:09.971: RADIUS: 67 61 74 72 6F 6E 2F 32 30 37 35 39 38 39 38 34 [gatron/207598984]
Dec 16 08:34:09.971: RADIUS: 2F 34 31 31 [ /411]
Dec 16 08:34:09.971: RADIUS: Message-Authenticato[80] 18
Dec 16 08:34:09.971: RADIUS: A4 02 84 1E 1A 97 E9 E9 DE 46 93 D6 30 C4 52 99 [ F0R]
Dec 16 08:34:09.971: RADIUS: Vendor, Cisco [26] 36
Dec 16 08:34:09.971: RADIUS: Cisco AVpair [1] 30 "ip:inacl#1=permit ip any any"
Dec 16 08:34:09.971: RADIUS(00000000): Received from id 1645/199
Dec 16 08:34:10.069: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0080.9fc8.a9eb) on Interface Gi1/0/11 AuditSessionID 0A0A510A0000011E3329AE1E
Dec 16 08:34:10.069: RADIUS/ENCODE(0000025F):Orig. component type = Dot1X
Dec 16 08:34:10.069: RADIUS(0000025F): Config NAS IP: 0.0.0.0
Dec 16 08:34:10.069: RADIUS(0000025F): Config NAS IPv6: ::
Dec 16 08:34:10.073: RADIUS(0000025F): sending
Dec 16 08:34:10.073: RADIUS/ENCODE: Best Local IP-Address 10.10.81.10 for Radius-Server 10.1.30.11
Dec 16 08:34:10.073: RADIUS(0000025F): Sending a IPv4 Radius Packet
Dec 16 08:34:10.073: RADIUS(0000025F): Send Accounting-Request to 10.1.30.11:1813 id 1646/240,len 423
Dec 16 08:34:10.073: RADIUS: authenticator 6C 75 45 C7 B7 66 2F 4D - 04 01 C6 CE A5 16 68 9B
Dec 16 08:34:10.073: RADIUS: Acct-Session-Id [44] 10 "00000255"
Dec 16 08:34:10.073: RADIUS: Calling-Station-Id [31] 19 "00-80-9F-C8-A9-EB"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 49
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 43 "audit-session-id=0A0A510A0000011E3329AE1E"
Dec 16 08:34:10.073: RADIUS: Framed-IP-Address [8] 6 10.10.78.250
Dec 16 08:34:10.073: RADIUS: User-Name [1] 14 "00809fc8a9eb"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 32
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 26 "connect-progress=Call Up"
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 21
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 15 "lldp-tlv= "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 25
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 19 "lldp-tlv= "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 23
Dec 16 08:34:10.073: RADIUS: Cisco AVpair [1] 17 "lldp-tlv= "
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 28
Dec 16 08:34:10.073: RADIUS: Vendor, Cisco [26] 28
Dec 16 08:34:10.073: RADIUS: Tunnel-Packets-Lost [86] 101 1852075890
Dec 16 08:34:10.076: RADIUS: Nas-Identifier [32] 32 "
Dec 16 08:34:10"
Dec 16 08:34:10.076: data_left 15
2960-09#
Dec 16 08:34:10.076: RADIUS(0000025F): Started 5 sec timeout
Dec 16 08:34:10.090: RADIUS: Received from id 1646/240 10.1.30.11:1813, Accounting-response, len 20
Dec 16 08:34:10.090: RADIUS: authenticator 91 9F CE 71 1C 4B 45 93 - 49 86 52 C8 C3 44 40 B8
2960-09#
Dec 16 08:34:11.485: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/11, changed state to up
Dec 16 08:34:12.485: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/11, changed state to up
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#
2960-09#sh auth
2960-09#sh authentication ses
2960-09#sh authentication sessions int gi
2960-09#sh authentication sessions int gigabitEthernet 1/ /0/11
Interface: GigabitEthernet1/0/11
MAC Address: 0080.9fc8.a9eb
IP Address: 10.10.78.250
User-Name: 00809fc8a9eb
Status: Authz Success
Domain: VOICE
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
ACS ACL: xACSACLx-IP-PERMIT_ALL_TRAFFIC-537cb1d6
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A0A510A0000011E3329AE1E
Acct Session ID: 0x00000255
Handle: 0x3600011F
Runnable methods list:
Method State
mab Authc Success
dot1x Not run
2960-09# -
Using iMessage with my phone number
Hey guys, im trying to imessage my friend in the US from Australia, because texting normally is costing too much. However i couldnt imessage this morning and reset my network settings, now under send and receive its got my @live address and @icloud, but my number is greyed out so I cant select it.
Any advice on how to fix this?
Thanks
LucasiOS: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538 -
Can iphone 4 use facetime with other phone?
Hi,can iphone 4 use facetime or video call with sony ericsson satio?do need to install any software?
yes the above said, yahoo messenger came out with the update, which you can do video calling from your iphone 4/ipod touch 4G to a pc/mac. It can be done through wi-fi or 3G
There is another app called Tango which you can do video chat cross-platformed, meaning, you can make video call with another device that isn't an iphone 4, such as an android phone, they should also have tango, once they download the tango, and if their e-mail is saved in your contact, you will then be able to make video calls. can be done in wi-fi or 3G
*if you have unlimited 3G data, then I wouldn't worry, but if you have a data cap, then not recommeneded as it can eat up your data pretty fast. -
Why doesn't my iPad allow me to use iMassage with my phone number anymore?
I used to use FaceTime and iMassage with my cell phone number on my iPad. Now, it only allows me to use my email address. Why the change?
I'm using iOS 6.1.3.It's best to use an email address.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
How to use massage with other phone numbers
does massage only work with apple products.
Link phone number and Apple ID with FaceTime and iMessage
http://support.apple.com/kb/HT5538 -
Create Sip account in cca and use it with spa phones
Hi,
How can we create sip account on a uc560 ?
Regards,
Sent from Cisco Technical Support Android AppHi,
Windows Server 2012 has come with the concept of Group Managed Service Account (gMSA).
Following are the benefits of gMSA,
- A single gMSA can be used on multiple hosts.
- A gMSA can be used for scheduled tasks.
- A gMSA can be used for IIS Application Pools, SQL 2012 etc.
Checkout the below link regarding complete information on gMSA (creation and usage),
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/5bc96d1b-0cec-4d0c-a99d-7f34509c0714/how-to-use-correctly-managed-service-account-in-windows-server-2012-?forum=winserverDS
Regards
Gopi
JiJi Technologies
Maybe you are looking for
-
I get the message "The application "Finder" cannot be launched. -600 Read
For the last couple of days my G5 was not shutting down, so had to hold in front power button, manual sleep sometimes refused to wake and applications failed to quit. and yesterday i got the following error. I get the message "The application "Finder
-
Is there a TLOG? What's wrong?
Hi, How can I find out if my application has a TLOG device configured. In the dmconfig I see that the parameter DMTLOGDEV is set. Often I see this following error in the ULOG - LIBGWT_CAT:1042: ERROR: Can't open domain log What could be going on? Wil
-
I have an rMBP and on vmware have Windows XP and I tried installing a game (Saints Row: Third Row) but when I try to I get a Failed to create Graphic Device" and the game wont start up. Is there a setting or driver I need to install to get it to work
-
How to reset the password on a PowerBook 1400c.
I recently inherited an old powerbook 1400c from a relative which passed, and am trying to reset the password in order to use the machine. I know that I could purchase the original os floppies, however I am not so keen on the $60+ I would spend to d
-
Zero KF saved when i am creating new records
Hi, There is some way to save new records (combination of values of characteristics) in my BPS layout, with key figure in 0? This is because I need to fetch these records later and to display my 0 prognostic. But they are not saved because have 0 in