Using ADDRESS PARAGRAPH to call International address ??

HI Experts,
I have an existing Sapscript to modify.
I need to extract/retrieve the address of the customer by using the International Version address maintained by the user.
However - in the existing Sapscript, it uses the ADDRESS PARAGRAPH to call formating address.
Is it possible to extract the international version address using the ADDRESS PARAGRAPH function in Sapscript?
Kindly advice.
Thank You.
Best Regards,
CW
Edited by: CW LIM on Oct 21, 2009 6:06 AM

Close Postage

Similar Messages

International Address Version for Spanish Language

Hi,
We need to activate International Address Version for Spanish in our system. But i dont find Spanish language in the available Languages activation Screen. Ony Chinese,thai kind of languages are avialable.
If i want to activate Spanish which is not available in the system, what are all the things do i need to do?
Please provide me some inputs on that..
Thanks

Hi,
in the attachment of SAP note 316331 you will find the following:
Excerpt begin
If you do not want to use the proposed SAP standard international address version keys, you
can also create your own address version keys. You can also use transaction SM30 and
maintenance view V_SAPTSADV to create address version keys in the customer name range
0-9.
Excerpt end
As Spanish (Latin-1) is not typically used as address version key, you need to create a customer specific key ...
But please note that this is a rather unusual approach:
Most customers use address versions for Non-Latin scripts only.
Best regards,
Nils Buerckel

Internal Address table names

I need to produce a report detailing out the information for our locations (internal addresses). What are the table names to be able to pull all this data from? Thank you.

Hi,
The location business partner number is kept in table BBP_LOCMAP.
Using the business parter number, you can call the FM BAPI_BUPA_ADDRESS_GETDETAIL to get the address. I am more comfortable in using the FM instead of table
Regards.

Unable to access vpn box internal address after vpn

Hi all. My office network is protected by asa5510 firewall with vpn configured. When i vpn into my office network i could not access the firewall via the firewall's internal address using telnet etc even though i have already enable telnet. The firewall is my office network gateway. Below is my config. Pls advise. Thks in advance. Access to my office network is fine using vpn.
hostname firewall
domain-name default.domain.invalid
enable password xxx
names
dns-guard
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.1x.x 255.255.255.0
interface Ethernet0/1
nameif DMZ
security-level 50
ip address 192.168.2x.x 255.255.255.0
interface Ethernet0/2
nameif outside
security-level 0
ip address 8x.x.x.x 255.255.255.240
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd xxx
ftp mode passive
same-security-traffic permit inter-interface
access-list inside_access_in extended permit ip 192.168.1x.0 255.255.255.0 any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended deny ip any any
access-list DMZ_access_in extended permit ip 192.168.2x.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 172.16.0.0 255.255.255.224
access-list split-tunnel standard permit 192.168.1x.0 255.255.255.0
pager lines 24
logging enable
logging asdm-buffer-size 500
logging asdm informational
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
mtu management 1500
ip local pool addpool 172.16.0.1-172.16.0.20 mask 255.255.0.0
no failover
monitor-interface inside
monitor-interface DMZ
monitor-interface outside
monitor-interface management
asdm image disk0:/asdm-507.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 100 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 100 192.168.1x.0 255.255.255.0
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
group-policy vpn internal
group-policy vpn attributes
dns-server value 192.168.1x.x 192.168.1x.x
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
webvpn
username ciscoadm password xxx encrypted privilege 15
username ciscoadm attributes
vpn-group-policy vpn
webvpn
http server enable
http 192.168.1x.x 255.255.255.255 inside
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 13800
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
tunnel-group vpn type ipsec-ra
tunnel-group vpn general-attributes
address-pool addpool
default-group-policy vpn
tunnel-group vpn ipsec-attributes
pre-shared-key *
telnet 192.168.1x.x 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0

Hi all. Below is my configuration. After i enable "management-access inside" i could access my firewall internal ip via ping after establishing vpn connection but not others like telnet even though "telnet 0.0.0.0 0.0.0.0 inside" is enabled. Pls advise.
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.1x.254 255.255.255.0
interface Ethernet0/1
nameif DMZ
security-level 50
ip address 192.168.2x.254 255.255.255.0
interface Ethernet0/2
nameif outside
security-level 0
ip address 8x.xx.xx.xx 255.255.255.240
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd xxx
ftp mode passive
same-security-traffic permit inter-interface
access-list inside_access_in extended permit ip 192.168.1x.0 255.255.255.0 any
access-list inside_access_in extended permit esp any any
access-list inside_access_in extended permit gre any any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended deny ip any any
access-list DMZ_access_in extended permit ip 192.168.2x.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 172.16.0.0 255.255.0.0
access-list split-tunnel standard permit 192.168.1x.0 255.255.255.0
access-list prod standard permit host 192.168.1x.x
access-list prod standard deny any
pager lines 24
logging enable
logging asdm-buffer-size 500
logging asdm informational
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
mtu management 1500
ip local pool pool 172.16.0.1-172.16.0.20 mask 255.255.0.0
no failover
monitor-interface inside
monitor-interface DMZ
monitor-interface outside
monitor-interface management
asdm image disk0:/asdm-507.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 100 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 100 192.168.1x.0 255.255.255.0
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8x.xx.xx.xx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
group-policy vpnuser internal
group-policy vpnuser attributes
dns-server value 192.168.1x.x 192.168.1x.x
split-tunnel-policy tunnelspecified
split-tunnel-network-list value prod
default-domain value mm.com
webvpn
username user password xxx encrypted privilege 15
username user attributes
vpn-group-policy vpnuser
webvpn
http server enable
http 192.168.1x.x 255.255.255.255 inside
http 0.0.0.0 0.0.0.0 inside
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 13800
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
tunnel-group vpnuser type ipsec-ra
tunnel-group vpnuser general-attributes
address-pool pool
default-group-policy vpnuser
tunnel-group vpnuser ipsec-attributes
pre-shared-key *
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd dns 8x.x.1x.x 8x.x.x.x
dhcpd lease 3600
dhcpd ping_timeout 50
dhcpd enable management

Import and export of international address

Hello all,
I need help with the international address version. I want to import greek data to our system using the ELM, because of the duplicate check already in place in our ELM.
Has anybody experience with that?
Then I also need to export the international address again via a campaign with the channel data export. Is there an easy way to achieve this?
Or is it possible to configure the serach result list for accounts/contact persons that I can see and export the information there directly?
Thanks a lot for your help!
Regards Anne

Hi,
Right click on the DCs which you want to get in the IDE and select Create Inactive Project.
If it prompts for the dependencies select them.
Once this is done u will be able to see the project in the WD perspective.
Now right click on the DC and select Development Component -> Build .
then Development Component -> Deploy.
If its there are any errors related with hard references deploy those DCs first and try.
Regards
Ayyapparaj.

Internal Addresses - BP Address for Org Unit representing a Company Code

Dear All
We are on SRM Server 5.5 and are experiencing an annoying issue. It might be standard, but I do not recall having the problem earlier on, at other customers.
The internal address of BP ## representing a company code, automatically gets Name1 filled out with the Object Name in the Org structure (Typically Company name).
This is ok, but what we see is that Name 2 is also filled out with this name. This gives us an issue when printing the PO in the backend system (classic scenario) as the PO will have both Name1 and Name2 printed as delivery address.
We have tried to change the address in BP, which works ok - until someone makes a change in the org structure, then the BP address is updated again!
Can anyone enlighten me whether this is standard functionality or what? And if is there anyway of mitigating this behavior?
Best Regards, and thanks in advance
;O)
Maria

Dear all,
five years later, but we have currently the same problem as Maria described.
In my company, we are filling the fields SHORT and STEXT of the structure P1000 (transaction PPOMA_BBP) with more or less technical names or terms.
So far, that was working very well.
But in the future, we need to use the fields NAME_ORG1 and NAME_ORG2 of the transparent table BUT000 as the first two fields of the delivery address.
That leads to the situation that technical term/names are used in the delivery address, which is not realy beautiful.
We cannot enter the correct delivery data into the fields SHORT and STEXT in the PPOMA_BBP, because the fields have not enough spaces.
Do you have any ideas how we can solve this issue?
Kind regards
Ignatius

2 BM Servers Natting to Same Internal Address

Can this be done? I'm changing my BM server that does natting, to a different server on a different external subnet. To test it's functionality, without downing the old server, I've set natting up the same on the new as the old. This means that during the testing phase, I've got 2 different external addresses natted to the same internal address. I've been having some erratic problems with this. Could it be that this is causing a conflict?

What you can do is to set up a second BM server in parallel to the
first one, (and eventually perhaps cluster the two) for testing.
Make all addresses you point to secondary addresses (except VPN) on the
old server. This means the internal proxy address needs to be a
secondary address, which can be done by readdressing the private side
of the BM server and adding the old address back as a secondary.
Once the proxy address is a secondary, it becomes much more portable.
You would have one or two NCF files to add the secondary addresses as
needed. (Do not add them in inetcfg). And another NCF to delete the
secondaries.
Unload proxy on the old server, then load it on the new one (once it
has been configured with old server addresses). Unload secondaries on
old server (with NCF) and add to new one (with NCF file) - NAT's and
filtering need to be set up in advance. All your traffic will move to
the new server as long as you avoided address duplication. You test
and see how things work.
Reverse the process to go back to the old server.
This is what I call a 'poor man's cluster', as you are doing manually
what simple cluster scripts would do (unload proxy, add addresses...)
Process is documented in my BMgr book - see URL below.
Craig Johnson
Novell Knowledge Partner
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

Networking question; How to use MAC address to find out IP address.

Hi there,
I want to discover the IP address of an attached device (Netgear switch) on my network. I know it's MAC address – can I use this to get the IP address?
Thanks in advance

Short for Media Access Control address, a hardware address that uniquely identifies each node of a network. In IEEE 802 networks, the Data Link Control (DLC) layer of the OSI Reference Model is divided into two sublayers: the Logical Link Control (LLC) layer and the Media Access Control (MAC) layer. The MAC layer interfaces directly with the network medium. Consequently, each different type of network medium requires a different MAC layer.
On networks that do not conform to the IEEE 802 standards but do conform to the OSI Reference Model, the node address is called the Data Link Control (DLC)
I have a feeling you might have the term MAC Address confused
Depending on the device you are using it may be that you can type in 192.168.1.1 and hit return key, and it will give you the Router Utility and this can give you the assigned IP Addresss to external devices, if the router is used.
Don

Is it possible to log calls with address book?

Does anyone know how to log calls with address book - I usually dial right out of addessbook (via blue tooth) and always get the incoming calls as pop-ups on my screen. I was wondering if address book is logging them anywhere that I could access. I would appreciate anybody's help! Thanks, Paul

Thanks for the response. Sometimes I just think my macs can do anything!
I often use the incoming phone info through caller to create/ update contacts. Perhaps there is something third- party out there that will fill the bill.
Anyway, have a great day! Paul

Call from address book

Hi, everyone.
I am developing some bb application which needs to catch and handle the number user called. When I tried to make a international call with "011" in front of the country code and number from address book(I saved the thole sequence as an entry in address book), I found the number I actually called was without "011" and the call can't get through. But it works if I call by manually dialling or from call log. Could anyone tell me what is the difference with calling from address book? Why bb removed "011" in front? Any suggestion will be appreciated. Thanks in advance.

Hi, you need to setup the device phone number, go to menu, phone (pressing the green key), press menu again, options, smart dialing
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Edit Internal Address option system will only hold one Ship to Address loca

When trying to add an new address using Edit Internal Address option system will only hold one Ship to Address location. Each time a new one is added it simply over-writes the existing address instead of creating a second address. Attached screenshots show steps taken and results. Problem is also occurring in SRQ, unsure when this started as we do not use this functionality on a daily basis.

Hello Vijay,
For one location you can maintain more than one address using Edit Internal addresses in SRM web application (SAP_BBP_STAL_ADMINISTRATOR role).
Select Edit Internal addresses --> Select your business partner --> Push create button --> Maintain the address and save. A new address number will be generated.
Maintained addresses will be visible in search help for the requester. One of them can be set as default in PPOMA_BBP attributes.
Related Information:
Note 760824 - EBP R/3 - delivery addresses
http://help.sap.com/saphelp_srm50/helpdata/en/e4/47f839f42a7b2ee10000000a114084/frameset.htm
Re: ship-to clarification
Hope this might help. Please mention steps you followed if problem still persists.
Ashutosh

International Addresses and Phone Numbers

How do people typically deal with International Addresses and Phone Numbers? Do you use special attributes for these?

I know how to create attributes, the issue is how to create the right set of attributes that can be used for all given international telephone and addresses?
I would think there would be some sort of predefined standard for doing this but if you have to create your own custom attributes just to do this, then that's not really a great thing.
Oracle or the ldap standards people whomever they are should include all the object classes and attributes for International Telephone numbers and addresses so all you need to do is add the objectclass to your users and use them!
Sorry it just doesn't make sense to have everyone create these...

International Address iView

Is their an International Address iView (Ctry Grp 99) that SAP'rs have used that is available in the PCD?
Thanks
WB

Hi WB,
As of EHP3 there is an international iview for Addresses. PCD path is:
pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.13.bp_folder/com.sap.pct.erp.ess.13.iviews/com.sap.pct.erp.ess.13.personal_information/com.sap.pct.erp.ess.13.xx/com.sap.pct.erp.ess.13.addr/com.sap.pct.erp.ess.13.addr
This is used for Foreign Addresses and some additional customizing is needed.

International Address

We need to store international address (outside USA) of customers and eventually use those in some form of communication (letters, reminders, notices, etc).
How do we implement this from an IS-U/CCS perspective. Please provide links to helpful documents or suggestions from those that has this functionality.
Thanks in advance.

Hi,
Please refer the following link :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/d3/2f993fde24c777e10000000a114084/frameset.htm

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

I have a Mac Pro using OSX 10.7.4. When using apple mail I click on the address icon to obtain email address and nothing happens. I've restarted both the application and the Mac but still won't open address book. Any ideas please.

Assuming you have these accounts set up in Mail, open preferences and under Accounts tab, edit the SMTP outgoing server list. Do you have a .mac address in the list? If so, delete it.
Are you using iCloud?
For the troubled account, select the correct SMTP server for that account in the box and check the box to use only that server with that account.

Using ADDRESS PARAGRAPH to call International address ??

Similar Messages

Maybe you are looking for