Using ADL when Application.xml and Content.swf are not in the BIN directory

Hello, I am trying to use the air debug launcher (ADL) to
launch a simple air app. My issue is I am trying to have ADL launch
this app from outside of the bin directory of the SDK. Whenever I
try to pass adl the full path to the Applicaiton.xml file it says
"application descriptor not found" Does anyone know how to get
around this? How can I run an AIR app that is outside of the bin?
My situation C:\AIR has the Applicaiton.xml and Content.swf
files, then a directory way below C:\Program Files\....\..... has
the bin directory. I can run adl using its full path C:\Program
Files\....\bin\adl, but when I pass it the full path for
Application.xml it fails.
By the way when I put everything in the bin, or below the bin
it works just fine.

If you're receiving this error message then the full path
you're specifying for application.xml must be incorrect.

Similar Messages

HT1420 When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?

iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal.

HT4061 I need to sync my iphone and ipad to my new computer. I just downnloaded itunes in it. my song and album files are not in the new downloaded itunes. how do I import them in?

I just downloaded itunes on my new computer which uses Windows 7. I need to sync my ipone 4S and ipad to it. I noticed my complete song and album files are not in the new itunes. how do i get them imported to the new itunes. Would syncing my iphone and ipad do it?

In iTunes, go to File>Add File to Library or File>Add Folder to Library.

I transferred my iPhoto FACES to my mini iPad and: (a) they are not in the alphabetical order I had them in, (b) some of the FACES have been deleted, (c) the EVENTS I checked off in iTunes do not all appear in the iPad?

I transferred my iPhoto FACES to my mini iPad and: (a) they are not in the alphabetical order I had them in, (b) some of the FACES have been deleted, (c) the EVENTS I checked off in iTunes do not all appear in the iPad?

Go to your Pictures Folder and find the iPhoto Library there.
Right (or Control-) Click on the icon and select 'Show Package Contents'. A Finder window will open with the Library exposed.
Look there for the iPod Photo Cache. Trash it. Start iPhoto and try sync again.
Regards
TD

I started a creative cloud student membership but Premiere Pro and After Effects are not in the app

I started a creative cloud student membership but Premiere Pro and After Effects are not in the app and won't download from the adobe website, all that happens is that the creative cloud app opens and sends me to the list of programs available for download which still do not contain Premiere Pro and After Effects

Premiere Pro and After Effects are 64 bit only apps.
They require a 64 bit computer and a 64 bit operating system.
If you're running Windows 7 32 bit or Windows 8 32 bit then you will not be able to download, install or run Premiere Pro or After Effects.
See http://www.adobe.com/products/creativecloud/faq.html#desktop-products
Which desktop applications in Creative Cloud require 64-bit operating systems?
With the new CC apps, most of the pro video and audio applications now require 64-bit operating systems to run. These native 64-bit applications include Adobe Premiere® Pro CC, Adobe Audition® CC, After Effects® CC, Prelude® CC, and SpeedGrade® CC. Flash Professional CC, Photoshop CC and Lightroom® also require 64-bit on Mac OS.

I can not delete or compose an email on iphone 5. The icon and delete button are not on the screen.

I can not delete or compose an email on iphone 5. The icon and delete button are not on the screen.

I had the same problem. I completely powered down the iphone and then powered it back up. I then had the bar at the bottom of the email app that I think you are looking for.
iPhone5, OS6

Iphone 5 - Not working and usual options are not correcting the issue

My iPhone 5 will not start. I have tried many options listed on this site, however I have been unsuccesful in resolving the issue myself.
This is an issue that I had last May, which resolved itself after 2 or 3 weeks. I was discussing this with Apple support but got no answer on how to fix it. As it 'self fixed' (i.e. I did not do anything new that I was not trying for 2-3 weeks already and the phone just began operating normally) I guessed it was fixed so I stopped looking for a solution to a problem that did not exist any more.
However, the problem started again last week.
That is to say, the iphone powered down and could not be restarted immediately. I used the 'hard start' option which worked a couple of times, but now it will not restart. During an 'up' period, I upgraded the software to the lastest public release thinking that this might help. However, it has not.
Now, I only get a visual of the USB cord and a message to connect to itunes. When I connect to itunes it does not recognize the phone but does recognize that there is a software error. When I try to restore, it does not work as it brings me back to the error message.
Anyone any ideas? I am trying to organise the final pieces of my wedding in 6 weeks and I really need the phone to work right now! I will be contacting apple directly in the mean time, but if anyone has any ideas I would be very grateful.
Thanks.

Still I can't do anything ... the phone still same when i tried to re do the steps again given that itunes can't restore the phone " unkown error "
What to do ?/??

Got a used iPod touch 4th gerneration, and most apps are not able to be d/l with iOS6. Is there a way to get the older, compatible apps on my iPod touch?

How do I get older versions of apps to download to my iPod touch 4th generation?

Starting when iOS 7 was released, Apple now allows downloading the last compatible version of some apps (iOS 4.2.1 and later only)
App Store: Downloading Older Versions of Apps on iOS - Apple Club
App Store: Install the latest compatible version of an app
You first have to download the non-compatible version on your computer. Then when you try to purchase the version on your iPod you will be offered a compatible version if one exists.

Why ejbActivate and ejbpassivate methods are not in the stateless bean

please give me clearly

You can translate "activate" and "passivate" as follows:
activate means "please fetch the last state for this stateful session bean from the persistent store"
passivate means "the container is going to unload this stateful session bean from memory, so please persist its state in the persistent store"
Neither of those statements apply to stateless session beans, because they're stateless. There's nothing to persist. One SLSB is as good as another for servicing a request. They don't care who their last client was.
%

BPM when both sender and receiver systems are Sync. Please help!

Hi Experts,
I want to use BPM when both sender and receiver systems are Sync. For example: web service ---> RFC
I have tried the solution as given in the blog
https://weblogs.sdn.sap.com/pub/u/39730 [original link is broken] [original link is broken]
but it does not work. I am getting Time Out error.
Can somebody tell me the correct way of configuring BPM for sync-sync scenario?
Kindly give the integraion directory steps also.
Thanks
Gopal

Hi Hemant,
I have already tried the solution as given in the blog (https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken])but it does not work. When I run the scenario I am getting Time out error.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">PL_TIMEOUT</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Timeout condition of pipeline reached</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please help!
Thanks & Regards,
Gopal

Plant and Cost Center are not displaying in FI doc. for asset scrap ABAVN.

Hi All,
When we do asset retirement by Scraping using Transaction Code ABAVN, Plant and Cost center are not appearing in the FI document. But, in the master data the Plant and Cost center are assigned for the particular Asset.
When I see the FI document display, the fields Cost Center and Plant are blank. Business Area and Profit Center fields are getting updated.
Can any one help me how to get this Plant and Cost Center in the posted document. Is there any OSS notes for this. I am using ECC 6.0 version.
Thanks in advance for your help.
Regards,
Rajesh

Rajesh
Aditional on me answer.
The systemtakes not the cost center from the asset you have to assign it in OKB9 or to fill in during this posting:
Steps
Click on Simulate, than you see the posting screen:
Click on the line (pk 40)
Click on Goto and Additional account assignment and fill in the cost center whatu2019s in the master record of the asset and post
An other option is to make a substitution to get this information

MIRO issue (urgent!), amount and quantity fields are not captured from PO

Hi,
When we try to post thought MIRO using PO as reference, quantity and amount fields are not captured. We do MIGO first and then MIRO.
GR based invoice verification in the vendor master is selected and the check mark GR-based in the PO is selected too.
We're getting this MIRO issue for "all" PO and Service Entry Sheet.
We'll appreciate your recommendation in order to fix this critical issue as soon as possible.
Thanks in advance.

I was looking for copy controls and other functions. Glad this is now resolved. You need to award yourself points!
Cheers.

Deploy given EAR file having application.xml and change context-root

hi
Please consider deploying a given EAR file on WebLogic Server 10.3.5 (part of JDeveloper 11.1.1.6.0) and changing the context-root for its web-module.
For example an EAR file with only a web-module (ReviewContextRootFirstApp.ear [1]) or an EAR file with a web-module and an ejb-module (ReviewContextRootSecondApp.ear [2]).
Given documentation appendix B section "context-root" [3] saying
"... A context-root setting in application.xml takes precedence over context-root setting in weblogic.xml. ..."
and documentation section "Typical Deployment Configuration Workflows" [4] saying
"Oracle does not support using a deployment plan to change the context-root in an application.xml file. However, if an application is deployed as a library, you can either change the context-root through an weblogic-application.xml file or use the deployment plan to change the context-root in an weblogic-application.xml file. "
Some observed behaviour:
- scenario (sc1) : deploy ReviewContextRootFirstApp.ear without deployment plan, results in context-root "/rcrfaweb" (as in application.xml)
- scenario (sc2) : deploy ReviewContextRootFirstApp.ear with deployment plan fa-plan.xml (tries to configure "/rcrfaweb11"), results in context-root "/rcrfaweb" (as in application.xml)
- scenario (sc3) : deploy ReviewContextRootSecondApp.ear without deployment plan, results in context-root "/rcrsaweb" (as in application.xml)
- scenario (sc4) : deploy ReviewContextRootSecondApp.ear with deployment plan sa-plan.xml (tries to configure "/rcrsaweb21"), results in context-root "/rcrsaweb" (as in application.xml)
The blog post "Defining the context root of a web application in Oracle WebLogic server" [5] by Silviu Leahu in its section "Defining the context root in deployment plan" suggests to
"Remove the META-INF/application.xml DD from the EAR"
- scenario (sc5) : remove application.xml from ReviewContextRootFirstApp.ear (e.g. using Ant target "remove.application.xml.from.ear") and deploy with deployment plan fa-plan.xml, results in context-root "/rcrfaweb11" (as in fa-plan.xml)
- scenario (sc6) : remove application.xml from ReviewContextRootSecondApp.ear (e.g. using Ant target "remove.application.xml.from.ear") and deploy with deployment plan sa-plan.xml, results in context-root "/rcrsaweb21" (as in sa-plan.xml)
One could expect that using a deployment plan (like in scenario's (sc2) and (sc4)) would allow to configure/change the context-root, whithout having to make changes to the EAR file to make this possible. (Somewhat like "Figure 4-2 Single Deployment Plan Workflow")
Only in scenario's (sc5) and (sc6) I see something close to what I would like to achieve, but there the application.xml file has been removed from the EAR file.
So ...
- (q1) Is it impossible to change the context-root at deploy-time for a web-module in a given EAR file that includes an application.xml file, without changing the EAR file?
- (q2) Is working with EAR files that don't have an application.xml file a supported approach (to change the context-root at deploy-time)?
Seems like a simple goal, but I must be missing something that is required to achieve it.
- [1] ReviewContextRootFirstApp/deploy/ReviewContextRootFirstApp.ear in the ZIP file
at http://www.consideringred.com/files/oracle/2012/ReviewContextRootApps-v0.01.zip
- [2] ReviewContextRootSecondApp/deploy/ReviewContextRootSecondApp.ear in the (same) ZIP file
at http://www.consideringred.com/files/oracle/2012/ReviewContextRootApps-v0.01.zip
- [3] http://docs.oracle.com/cd/E21764_01/web.1111/e13712/weblogic_xml.htm#WBAPP623
- [4] http://docs.oracle.com/cd/E21764_01/web.1111/e13702/config.htm#DEPGD172
- [5] http://blog.leahu.net/it/2011/01/04/defining-the-context-root-of-a-web-application-in-oracle-weblogic-server/
many thanks
Jan Vervecken

Thanks for your reply René van Wijk.
René van Wijk wrote:
You can use deployment plans in order to change the context-root ...That is what I tried and describe in scenario's (sc2), (sc4), (sc5) and (sc6) in this forum thread.
Because the application.xml file (in the "given EAR file"), added by JDeveloper 11.1.1.6.0 when deploying to an EAR file, doesn't have id attributes on its application/module elements, I first tried a different XPath expression:
"/application/module/web[web-uri/text()="WebProject.war"]/context-root"
But, that didn't work.
Although the "given EAR file" does not have the suggested id attributes, I tried adding a deployment descriptor application.xml file that does have such id attributes [2], allowing an XPath expression like the one suggested:
"/application/module[id="WebProject"]/web/context-root"
- scenario (sc7) : deploy ReviewContextRootFirstApp.ear (in ReviewContextRootApps-v0.02.zip) with deployment plan fa-plan-application-xml-with-id.xml (tries to configure "/rcrfaweb14"), results in context-root "/rcrfaweb" (as in application.xml)
- scenario (sc8) : deploy ReviewContextRootSecondApp.ear (in ReviewContextRootApps-v0.02.zip) with deployment plan sa-plan-application-xml-with-id.xml (tries to configure "/rcrsaweb24"), results in context-root "/rcrsaweb" (as in application.xml)
So, it does not seem to work.
... you have to use a variable assignment in the right part of the deployment plan (in this case the application.xml) ...My observations I describe above (that it does not seem to work) seem to confirm the Oracle documentation [1] I referred to in this forum thread before:
"Oracle does not support using a deployment plan to change the context-root in an application.xml file. ... "
... By using an xpath expression, you can define which part of the xml has to be changed. ...The values for the deployment-plan xpath elements seem to be "peculiar".
Although it should not be a problem in an XPath expression, using single quotes (like module[id='WebProject'] ) instead of double quotes (like module[id="WebProject"] ) results in:
"java.lang.AssertionError: Attributes must be defined as name value pairs, eg, name="value" -- [id='WebProject']"
Because an XPath predicate expression would use an "@" to refer to an attribute, I also tried to replace what you suggested module[id="Web"] with something like module[@id="Web"] but that also did not make a difference.
- [1] http://docs.oracle.com/cd/E21764_01/web.1111/e13702/config.htm#DEPGD172
- [2] http://www.consideringred.com/files/oracle/2012/ReviewContextRootApps-v0.02.zip
regards
Jan Vervecken

HT1660 When I install itunes, the xml and media folders are placed on desktop not in my music folder on Vista where I want them to be

So I've installed and uninstalled itunes 3 times, using control panel to unintall everything, then ccleaner to make sure nothing is left over. No ipod service and stuff left.
Each time I install, the defult folder where the Media Folder, and album art folder plus all the xml and other files are put on my desk top.
Opening up Itunes, preferences, changed folder to user/music/itunes it doesn't work, keeps defaulting back to desktop. Help please
OS is Windows Vista

Good to hear you got it fixed. A common reason for this issue is a problem with security permissions. This is another approach that may help in such cases.
Repair Permissions
Right-click on your main iTunes folder and click Properties, then go to the Securitytab and click Advanced. Use the Change Permissions... button grant to your account (or the Users group) and SYSTEM full control of this folder, subfolders and files, then tick the option to Replace permissions entries... which will repair permissions throughout the library. When complete switch to the General tab, click in the Read-only check box to clear it, then click Apply.
If you don't have the option to change the permissions then use the Owner tab and Edit... button to take ownership from an account with administrator privileges. Tick the option to Replace owner on subcontainers and objects.
Repeat with the media folder if it isn't stored inside the main iTunes folder.
tt2

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge

I have Cisco TelePresence SX10 and content sharing is not working when I am dialing through the bridge, I can share the content if I drag and drop from RMX, but if schedule the call in Resource manager or manually dial in from device the content is not going to other hand, I have tried to turn off encryption as well but still same issue. can you please help me out with this. I am from Lion co and purchased sx 10 recently.
regards
Hemang

Can you please provide us with a little more information on your systems and configuration / topology, such as, what call control are you using (Cisco VCS, CUCM, other?). what type of "Bridge" are you using (is this a Cisco MCU, or Cisco TelePresence Server, or other device?), what versions of the software are on each of the devices, etc. The more information we have about your environment will help us assist you better. But saying that, if all your core equipment isn't Cisco, you may have more luck in the forums for the manufacturer of such equipment (ie Polycom's Support Community).
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Using ADL when Application.xml and Content.swf are not in the BIN directory

Similar Messages

Maybe you are looking for