Using advanced features of M-Audio Oxygen49 control surface

Hi -
My M-Audio Oxygen49 MIDI controller has been working great as a midi keyboard, but I'm having trouble to get the advanced functuions working (faders and knob). Does anyone with experience using this controller have any advice on how to get these functions working in Garage Band? Thanks!

M-Audio has some free software called Enigma that may give you control over what you're looking for.
Also, be sure to check out the Yahoo Group - http://launch.groups.yahoo.com/group/M-Audio_Enigma/
They have files and other users that can help answer a lot of your questions.
Hope that helps!

Similar Messages

If I have a license for Acrobat Pro XI do I need to upgrade on FormsCentral to use advanced features?

I am looking to use more than the standard 5 forms, as well as the email redirect functions etc. While my machine has Acrobat XI Pro, it still asks me to upgrade on FormsCentral when I go to use some features. Yet, when I select the upgrade button, it says upgrading to Acrobat Pro is an option.

Why want you use FormsCentral?

Which control surface do you use, would like to use or have used for audio?

I am shopping control surfaces for mixing audio in Premiere Pro CC. I am buying used so I would sure like to get it right the first time. I am looking for feedback from those who have used a control surface as well as those who have just looked around. I have searched high and low for information from Premiere Pro users but have found very little. Even the Audition folks have not shared much information about experiences with audio control surfaces.
Here are some consoles I've looked at but cannot determine compatibility (due to lack of information):
Mackie Control Universal MCU Pro 8
Digidesign Command 8
Digidesign Digi 002 Pro Tools Console
M-Audio ProjectMix I/O Control Surface
Icon QCon Pro USB Midi Controller Station
Behringer B-Control Fader BCF2000
Radikal Technologies SAC 2.2 DAW controller
Avid Artist Mix Control 8 Fader Euphonix DAW Mixing Control Surface
Tascam FW-1884 Firewire Control Surface
Tascam FW-1082 Firewire Control Surface
CM Labs Motormix
CM Labs Motormix 2
CM Labs MotorMate
Novation ZeRO SL MkII MIDI DAW Control Surface
Nektar Panorama P1 USB Midi DAW Control Surface
Alesis Master Control
If you have experience with any of these consoles, or have any to add to the list, specifically with Premiere Pro, please leave a note here. I believe there will be others who will check this discussion looking for the same answers as I. Documentation of these control surfaces is very thin when it coms to discovering if they are MCU or EUCON protocol (or other) - and even if I was able to discern a flavor I still do not know which features will work in Premiere, such as transport controls, faders, plug-in modifiers, et al.
So I guess my goal here is to come up with a list of work/don't work features for each of these control surfaces and more so we can make informed bang for the buck decisions. My budget for a used control surface is $300-400, but I'd be willing to go to $500-600 or more if the features/integration were significantly better.
Thanks!

Here is the list with the responses I have received from the manufacturers, (3) so far.
Mackie Control Universal MCU Pro 8
The MCU Pro uses three different types of MIDI operating protocols (Mackie Control, HUI, and Logic Control). We have not tested the MCU Pro here in Tech Support with Premiere Pro. You will want to contact Adobe directly to see if they support the Mackie Control, HUI or Logic Control protocols with the Premiere Pro software. It is up to the manufacture of the software on how well these MIDI operating protocols are implemented into the software. With contacting Adobe directly you will be able to see what control surfaces are supported with their software.
Digidesign Command 8
Digidesign Digi 002 Pro Tools Console
M-Audio ProjectMix I/O Control Surface
The Project Mix I/O is a discontinued product. However, it should work properly with basically any DAW program. I can't speak to specifically Premiere Pro, but we have a few customers who use that combination and those customers report it works just fine.
Icon QCon Pro USB Midi Controller Station
Behringer B-Control Fader BCF2000
Thank you for your email! Yes, you are able to use the BCF2000 to control Adobe Pro CC. YOu will need to program the controller into Mackie Emulation mode. Mackie Emulation will allow full functionality within your software. Attached you will find a PDF showing each emulation mode. Here are a few informative links explaining setup and application:
http://forums.adobe.com/thread/1286249
http://helpx.adobe.com/premiere-pro/using/control-surface-support.html
The former will provide a better understanding of connectivity.
Radikal Technologies SAC 2.2 DAW controller
Avid Artist Mix Control 8 Fader Euphonix DAW Mixing Control Surface
Tascam FW-1884 Firewire Control Surface
Tascam FW-1082 Firewire Control Surface
CM Labs Motormix
CM Labs Motormix 2
CM Labs MotorMate
Novation ZeRO SL MkII MIDI DAW Control Surface
Nektar Panorama P1 USB Midi DAW Control Surface
Alesis Master Control

Feature Request: Audio Level Control + Auto-accept chat

Hi all,
Just a quick note...
I am using iChat to monitor my elderly Grandfather who has mobility problems. He lives with me, but in a different room in my home.
I watch and listen in case he falls, or calls for help.
I use Bonjour to initiate a video chat and use his built in iSight in his iMac (intel).
The problem I am having is that there is no volume control on iChat, therefore the only way to control the level is via the main system volume. That doesn't work well since it affects all other things I am doing (music, videos, other chats, web pages...etc).
So basically I have to listen to his iChat session at system volume and 23 hours a day that's just coughing, or his TV, or whatnot.
It would be very useful if iChat had an independent volume control/mute for applications like this, and even for regular audio/video chat (some people listen to music while chatting).
The other request I would like up for consideration is a password protected auto-accept feature.
This would allow the host to automatically accept and initiate text/audio/video chats requested by authorized clients.
This way I don't have to initiate a chat, then run down to the other room to accept it.
Also this would be useful for security monitoring and baby monitoring purposes.
Thanks for listening
Sean

In the Alerts tab of iChat preferences, select Video Invitation from the Event pop-up menu. Then select the Run Applescript checkbox and select Auto Accept.applescript from the adjacent pop-up menu.
Granted, this doesn't give you password authentication, but I don't believe anything is available for providing that capability.
Hope this helps.
Palms831

Mavericks: "System Events" would like to control this computer using accessibility features?

I just installed Mavericks on my MacBook Pro and was in the process of exploring changes when suddently this message popped up:
- "System Events' would like to control this computer using accessibility features. Grant access to this application in Security & Privacy preferences, located in System Preferences.
The two choices offered are "Open System Preferences" and "Deny."
Any idea why this would be triggered? I don't like clicking to grant access without understanding what's going on.
Thanks.
Message was edited by: Bob Mayo

Dribble666 wrote:
Why would I want to do this?
Only if you want intrusive, incompatible, memory hogging software on your Mac.
Would this open a back door up to Google?
Yes. More than one.
Google software (Chrome, Google Drive, and Google Keystone Agent in particular) is bad news for Macs, and a frequent flyer on these discussions.

[svn] 3515: Catch misconfigured servers that attempt to use advanced messaging features without enabling the AdvancedMessagingSupport service .

Revision: 3515
Author: [email protected]
Date: 2008-10-07 16:27:09 -0700 (Tue, 07 Oct 2008)
Log Message:
Catch misconfigured servers that attempt to use advanced messaging features without enabling the AdvancedMessagingSupport service.
Bug: LCDS-397 - Not getting configuration exception when destination has reliable set to true but AdvancedMessagingSupport service is not defined.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* ConfigurationException is now thrown during startup in the misconfigured scenario in the bug report.
* Also cleanup up a few Java 1.5 warnings.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-397
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/common/src/flex/messaging/util/BasicPrettyPrinter.java
blazeds/trunk/modules/common/src/flex/messaging/util/ExceptionUtil.java
blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java

Revision: 3515
Author: [email protected]
Date: 2008-10-07 16:27:09 -0700 (Tue, 07 Oct 2008)
Log Message:
Catch misconfigured servers that attempt to use advanced messaging features without enabling the AdvancedMessagingSupport service.
Bug: LCDS-397 - Not getting configuration exception when destination has reliable set to true but AdvancedMessagingSupport service is not defined.
QA: Yes
Doc: No
Checkintests Pass: Yes
Details:
* ConfigurationException is now thrown during startup in the misconfigured scenario in the bug report.
* Also cleanup up a few Java 1.5 warnings.
Ticket Links:
http://bugs.adobe.com/jira/browse/LCDS-397
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/config/ConfigurationConstants.java
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
blazeds/trunk/modules/common/src/flex/messaging/util/BasicPrettyPrinter.java
blazeds/trunk/modules/common/src/flex/messaging/util/ExceptionUtil.java
blazeds/trunk/modules/core/src/flex/messaging/config/ServerConfigurationParser.java

Anyone else notice the bug in the "Blend RGB Colors Using Gamma" feature in Photoshop?

I think there's a bug in the "Blend RGB Colors Using Gamma" feature in Edit>Color Settings>Advanced Controls. For some reason it doesn't apply to layer styles.

Ok, here are two images. They both have a text layer with an outer glow (100% opacity pure green, normal blending mode) and a feathered green brush stroke (normal blending mode) over a red background. The first image is in RGB 8 bit (ie non-linear) image color mode. The second image is in RGB 32 bit (ie linear) image color mode. You can see how the 32 bit mode image (second image) has proper blending of the green glow onto the red background in both the text layer style as well as the brush stroke, while the 8-bit image properly blends the brush stroke but fails to blend the layer style using linear gamma (aka 1.0). In both screenshots you can see that PS is set to "Blend RGB Using 1.0 Gamma".
I'm assuming this is a bug?

Manual Audio Level Controls! - Sony Alpha DSLRS (A65)

Dear Sony -I absolutely love your DSLRs. However, to use the camera as an acceptable tool for amateur/indie/professional film, manual audio level controls in video mode are a must-have. Equal Canon competitors all feature this simple leveling option for managing audio.Currently, the automatic gain control is the only option for audio recording capabilities on Sony Alpha DSLRS in video recording. While in theory OK, AGC leads to terrible problems such as unnecessarily high and distracting background noise/hiss. Filmmakers desire crisp, clear audio!For quality results using an external microhpone, manual audio levels are the only way for filmmakers to achieve decent in-camera audio to compete with Canon users. Many amateur and professional videographers are in desperate need of this function! Audio is often MORE important than the image quality of your film, although Sony seems to increasingly neglect its video DSLR users by not implementing this ability and falling short on video options (Auto-focus in Manual Mode, audio levels on HUD etc.).To keep my Sony A65 a viable option for video work - please see if anything can be done! (Should be able to be added with a firmware update to all current and existing Alpha DSLRS) Thanks!!! - Love, a filmmaker who would desperately like to keep their A65 for professional video work! (Also from "Join The Inspiration")

Though a great idea, you also have to understand that the a65 isn't as film oriented camera like other cameras.
DSLR cameras with the audio controls are designed with film making in mind, thus they have that option.
Most DSLRs (at least, back in the days) was simply a camera to take photos. If you wanted to do film, you'd buy a dedicated film recorder for that. Having video capabilities in a DSLR was a bonus.
Nowadays, it's merging, bang for buck, reaching to a boarder audience, one size fits all, etc, and unfortunately, the a65 wasn't part of that 'nowadays' era.
The a99 and a77ii, if I remember correctly, has audio controls.
A lot of the newer Sony models (mirrorless) also have audio controls, that is, the ones that a targeted towards film making and not just great photos with the bonus of great video.
Also, I would presume that a lot of 'professional' videographers will either use external mics such as on a pole, a lapel mic, etc, to capture perfect audio, or if not, at least a shotgun/boom mic attached to the camera.
When doing such, there technically shouldn't be a lot of problems with the audio quality. Of course, if those external mics are still recorded into the camera, then yeah... but if they're recorded separately and slapped on during post processing... shouldn't be any problems...
If you're relying purely on the a65 and it's AGC, then there definitely will be shortcomings here and there unfortunately.
I recently filmed my niece-in-law's wedding. I didn't have any fancy mic setups (can't afford it at this stage), and this wasn't any sort of 'professional' work, more of just something for the family (free), but the audio came out excellent. Yes, it caught ambient noise (obviously), but I don't hear any cutoffs or badly pitched noises, or anything. The loud music and people cheering on and such all came through very clearly. Sure, it's no 'professional' bitrate or anything, but at 192kbps, it did the job.
Anyways, that was off topic, but all I'm saying is, you can't expect much from a photo taking centred camera which has been slapped on with nice video capabilities unfortunately. Also, due to the a65's age, I don't think Sony's bringing out anymore updates. My advice is either get an a77ii for it's awesome AF, or if full frame is a desire, then the a99 or a mirrorless (up to you).The a99 has a controllable focus range which is something I like, that way, if you're using autofocus (yeah... what 'professional' videographer would use autofocus aye?), you won't lose focus on subjects if something goes in front/behind it.Also, the little wheel at the front really helps in allowing you to make adjustments without disrupting video or causing too much movement in the camera. Right now, I am planning on getting a RX10ii. Though I'd love to get something from the mirrorless range, it's just way out of my budget (even the RX10ii is, so there's a lot of saving to do right now also...). Anyways, good luck with your videos.

M-Audio i-Control with Logic 7.2 vs. Behringer BCF2000 with Logic 6

I am just about to set up Logic Pro 6 after using Cubase CE for a while. I have also been investigating control surfaces. I heard from Apple and M-Audio that Logic Pro 7.2 now supports the i-Control control surface. I am debating the benefits of upgrading to 7.2 and getting the i-Control vs sticking with 6 and buying the BCF2000.
What recommendations do you have? Do the layouts of 7.2 and the i-Control enhance each other like Garage Band and the i-control do (I have never used Garage Band). How well do Logic and the BCF2000 integrate?
Thanks for any comments or recommendations.

Joe,
I've got the BCF2000, and got it for the primary reasons of tactile control via fader. Moterized is a cool feature. I've had it for over a year now and used it w/Logic 6.4.3, and now 7.1.1. Seeing that it lacks the LCD display (like the Logic or Mackie) which shows the parameters of the channel I bought this third pary app called LCXView that displays exactly like the LCD would, but i've since stopped using it because it started getting in the way to have Logic recognize the BCF on launch (once I jumped over to 7). The BCF needs to be booted in LC mode (Logic Control), as mine is by default.
The BCF doesn't have a shuttle control, which I would have liked. Eventually, I'll probably get a Mackie on the used market. Basically, the BCF get's the job done. Apple doesn't mention the unit in the manuals as supported, but by virtue of the fact that the BCF is in Logic Control emulation mode, it is supported.

IPad 3/iOS7 for audio production control

I use an iPad 3 with up-to-date iOS7 for audio production control. It connects to a wi-fi network that is never connected to the internet. I go through the process of canceling the “no internet” notice when connecting to the router and tapping ”use without internet” when (IF!) it appears. It usually takes a few attempts reconnecting to the router to get through the process. Once connected, I do not experience any issues.
The wi-fi connection is dropped if the iPad goes to sleep during the show and I have to go through the whole process again - losing control of the connected devices – until I manage to reconnect to the router. Not good.
Is there a workaround? Are there settings I’m not aware of?
Thanks in advance for any insight.

Thanks for the reply. I do turn sleep/lock off - sometimes I forget and am disconnected A high percentage of the time I'm on battery roaming the venue mixing.
I'm hoping for some feedback about connecting to a network without internet. It can take several tries to make it happen. Hoping there is a setting somewhere that will make it happen more quickly and reliably.

Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.

Recently installed Service Pack 1 in SharePoint Server 2013 Farm, post upgrade we are experiencing issue when opening visio documents:
I am trying to open .vsdx (visio 2013) file but encounter following issue:
Sorry, we couldn't open your file using this feature. Visio Web Access is not available on this site.
Under Document library-->Library settings-->Advanced Settings
Still I cant open file in browser as we always used to. Unfortunately we don't have Visio services in Farm.
can you share your experiences regarding this issue post Sp1 SharePoint Server 2013.
Thank You

Hi Octopus,
Based on the error message, it seems that the Visio Graphics Service is not started or the Enterprise feature is not enabled.
I recommend to check the things below:
Go to Central Administration > System Settings > Manage service on server > check if the Visio Graphics Service is started > then click Application Management > Manage service applications > check if the Visio Graphics Service application
is created.
Go to the root site settings page of the site where you got this error, click Site collection features to check if the SharePoint Server Enterprise Site Collection Features is enabled.
Go to the site settings page of the site where you got this error, click Manage site feature to check if the SharePoint Server Enterprise Site Features is enabled.
More information about the Visio Graphics Service:
http://tutorial.programming4.us/windows_server/microsoft-sharepoint-2013---looking-at-visio-services-(part-3)---visio-graphics-service-service-application.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

How to use the feature of ajax in visual web jsf

Hello,everyone!
I want to use the feature of ajax in visual web jsf,but the program encountered a error. I want refresh the dropdownlist once the javascript captured the refresh message,they both behaved asynchronously. However, the textField1 rendered with a blank box,while the dropDown1 had no change. The code as follows:
<jsp:root version="2.1" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:webuijsf="http://www.sun.com/webui/webuijsf">
<jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
<f:view>
<webuijsf:page binding="#{Page1.page1}" id="page1">
<webuijsf:html binding="#{Page1.html1}" id="html1">
<webuijsf:head binding="#{Page1.head1}" id="head1">
<webuijsf:link binding="#{Page1.link1}" id="link1" url="/resources/stylesheet.css"/>
<webuijsf:script>
var processEvents = {
update: function(props) {
var combo=document.getElementById("form1:dropDown1");
combo.refresh();
// Subscribe to refresh event.
function refreshme(){
var dom=document.getElementById("form1:textField1");
dom.refresh();
dojo.subscribe(webui.suntheme.widget.textField.event.refresh.endTopic, processEvents, "update");
</webuijsf:script>
</webuijsf:head>
<webuijsf:body binding="#{Page1.body1}" id="body1" style="-rave-layout: grid">
<webuijsf:form binding="#{Page1.form1}" id="form1">
<webuijsf:textField binding="#{Page1.textField1}" id="textField1" onBlur="refreshme();"
style="position: absolute; left: 168px; top: 144px" valueChangeListenerExpression="#{Page1.textField1_processValueChange}"/>
<webuijsf:textField binding="#{Page1.textField2}" id="textField2" style="left: 168px; top: 96px; position: absolute"/>
<webuijsf:dropDown binding="#{Page1.dropDown1}" id="dropDown1" items="#{Page1.dropDown1DefaultOptions.options}" style="position: absolute; left: 192px; top: 216px"/>
</webuijsf:form>
</webuijsf:body>
</webuijsf:html>
</webuijsf:page>
</f:view>
</jsp:root>
/**********************************java******************************************/
the function textField1_processValueChange didn't been invoked
public void textField1_processValueChange(ValueChangeEvent event) {
DropDown dd=getDropDown1();
Option op1=new Option();
String addText=(String)getTextField1().getText();
op1.setLabel(addText);
op1.setTooltip("tooptip");
op1.setValue(addText);
ArrayList <Option> l=null;
Iterator <Option> i = dd.getListItems();
while(i.hasNext()){
l.add(i.next());
l.add(op1);
dd.setItems(l);
thanks In advance all of your replies.

Hi there,
Take a look at this, will help you
http://developers.sun.com/jscreator/learning/tutorials/2/textcompletion.html
Thanks
K

Using Logic Pro 9 and Tascam DM-4800. Can't get the Tascam to work as a control surface via firewire... any help would be appreciated! Thanks!

The DM-4800 and Logic see each other, the firewire shows as 'locked' on both. Can pass audio back and fourth, no automation from the Tascam though. I know its either a midi setting or control surface settings... but I'm stumped. Newbie at Logic here. Any ideas what to check? Thanks in advance!

Plug in the usb lead.

How do I use javascript or formcalc to reference child controls (not by name)

Hi everyone,
I've created a ton of reports in the past, and I'm now looking at creating some reusable objects so that other people can use advanced form functionality without having to learn to use scripts.
A lot of the coding was acheived using this, .parent, etc. so that they can rename controls and subforms without having to worry about breaking scripts. One issue that I am having is that Some of my code looks at children controls, and references them by name (for example, I have some code that uses setfocus to move the user to the first field in a subform).
In most languages, there are ways to refer to child controls via an indexer or an items/children array. i.e. Subform.items[0].rawValue.
I know that this would pose some issues, but I think I could sort it out, if only I knew where to start. Is there some way to reference a child control without it's name?
Thanks for your help!
- Scott

Hi Scott,
The subform has a nodes collection you can loop though, as you suspected. If might show up more than you want but you can test the className to see if it is a field and then ui.oneOfChild.className to work out what type of field. So;
for (var i = 0; i < Subform1.nodes.length; i++)
var n = Subform1.nodes.item(i);
console.println(n.className + " " + n.name + " " + n.ui.oneOfChild.className);
Hope this helps.
Bruce

Using advanced features of M-Audio Oxygen49 control surface

Similar Messages

Maybe you are looking for