Using AE to extend the range of a DLINK WR

Hi All,
We have a DLINK wireless router that I would like to extend the range of to cover two small buildings for our wireless network using my airport extreme base station.
I have tried a few times trying to get the WDS functionality to work but can't get it to work - maybe my understanding of the capabilities is a bit off.
I was wondering if you guys could help out. Here is the setup I want.
1. The Dlink router is the main DHCP distributor for IP addresses
2. There is no internet connection
3. The encryption is WPA-PSK
4. SSID broadcast is on and the AE picks up the Dlink wireless signal no probs.
5. I want the AE to be a client / repeater for the Dlink router and simply extend the range of the Dlink network.
I have managed to set it up quite easily using a Airport Express as the extender, but the AExtreme is causing me issues...
Any help / suggestions would be appreciated.
Thanks guys
mjharps

It is not possible to configure either an Airport Express or an Airport Extreme Base Station to "extend" the wireless network of any model of D-Link wireless router. D-Link's products do not support Apple's implementation of a WDS.
I note that you said "I have managed to set it up quite easily using a Airport Express as the extender". That is not possible - likely what you have done is configure the Airport Express to simply "join" the wireless network created by the D-Link wireless router as a client. In that mode, the Airport Express does not extend the wireless range of the D-Link router - all client mode allows you to do is stream iTunes and print via the D-Link router to the Airport Express.

Similar Messages

I have two Airport Express units. Can I use one to extend the range of the other?

The similar questions that I have found on this site refer to extending an Airport Extreme with an Airport Express. But can you also extend an Airport Express with another Airport Express?

But can you also extend an Airport Express with another Airport Express?
Any Apple "n" router....AirPort Express, AirPort Extreme, or Time Capsule....can be used to extend the signal of another.
Now, we just need to figure out if you have two "n" Expresses that will work together. Are these brand new units?
If not, check the model number on the side of the device. You need to see A1264 there. If you see A1084 or A1088, these models will not qualify as "n" Expresses.

Can AirPort Express extend the range of my Dlink

Hi,
Wonder if Airport Express would extend the wifi range of my Dlink wifi gateway and would actually work properly with it?
Apreciate help ASAP!
Dlink router: DVG-N5402SP Wifi Gateway ( Provided by ISP )

The answer to the question is.....
Yes, if you plan to connect the AirPort Express to the D-Link router permanently using an Ethernet cable.
No, if you plan to have the AirPort Express connect wirelessly to the D-Link router.

Can I use an airport extreme to extend the range of my wireless modem

Can I use an Airport Extreme to extend the range of my wireless modem?
At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
Regards
Michael

Thanks Tesserax,
Your answer has confirmed my suspicions.
Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices.
I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

How do i use airport extreme to extend the range of my imac

I have an 2012 Imac and I would like to plug the Internet to my imac and use the the imac wireless and use my airport express to extend the range of the imac wireless signal. I am having an awfully hard time figuring this out - can anyone pass along a link to a document or any suggestions?
Thanks!

Apple's instructions for this are here:
http://support.apple.com/kb/HT4259
Although two AirPort Extremes are pictured in the example, the setup for a Time Capsule and AirPort Express would be exactly the same.
In general, a good starting location for the AirPort Express would be a point that is approximately half the distance from the Time Capsule and the area that needs more wireless coverage. You may need to experiment with the location of the Express a bit depending on the number of obstructions like walls and/or ceilings in the signal path

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network.

I purchased a new Time Capsule (2TB - 2013), and I would like to use my old Time Capsule to extend the range of my wireless network. I can't get them to communicate. Any ideas?

You need to use the airport utility on a computer.
If you use v6 utility it is fairly easy and straight forward.
The trick is to place the old TC in the same room as the new one.
Do a full factory reset and then you can just go through the utility to extend wireless network.
I did one post with all the pictures.
https://discussions.apple.com/message/24161378#24161378
If you have issues just ask.
Then you can place the old TC about half way between the new TC and the clients would want to connect.. the half way point is not distance but wireless signal levels.
You can pick that up by using the wireless diagnostics in a mac laptop and walking around to pick up the signals.
This is for extend wireless.. if you want roaming network it is entirely different. That means they are plugged together with ethernet.
Tell us if you mean roaming not wireless extend.

Can an Airport Express be used to extend the range of my Comcast wireless gateway?

We recently moved to a big old brick and stone farmhouse. When Comcast came they installed their new wireless gateway. Unfortunately the construction of my house is pretty solid. It effectively blocks the signal at the far end on the second floor. I've been trying to use an Airport Express, newest model, to extend the range of my network. Using the Airport Utility, it seems like it connects but the signal is no better. Does the Airport Express only work as a range extender on Apple wireless devices, or am I missing something when I use the Airport Utility to set up the extended network?

The AirPort Express can extend the wireless signal from the Comcast gateway if it is permanently connected to the gateway using a wired Ethernet connection, and the Express is configured to create a wireless network using the same name and password as the Comcast wireless network.
The Express cannot wirelessly extend the signal from the Comcast gateway, since the wireless "extend" feature will only work with other Apple routers.
The Express can "join" the wireless network provided by the Comcast gateway for use with AirPlay or a remote printer at the USB port, but when the Express "joins" a network, it does not provide any additional wireless signal coverage in that setting.

I have an old airport that still works, can you use it the same way that one uses an airport express to extend the range of an airport extreme base station?

It would save me a few bucks if I could use an old airport that I have to extend the range of a new airport extreme. My concept would simply be to use the old Airport the same way I would use a newer Airport Express as a slave repeater. Is this doable?

Both the new AirPort Extreme and older AirPort Express will have to be configured using Apple's WDS settings to provide more wireless coverage.
Here are the downsides:
WDS operates only at "g" wireless speeds, so you will lose all of the faster "n" wireless capability of the new AirPort Extreme
WDS cuts the bandwidth on the entire network in half, so you will have a "g" wireless network running at half speed.
WDS is difficult for most users to configure because it is easy to make a mistake and hard to recover without starting all over again
Bottom line......Saving a few bucks will be very costly in terms of performance on your network.

Can i use my airport to extend the range of my wireless network?

I currently have a two wireless networks set up in my home. Network 1 is the wireless router provided by Verizon Fios. It has a stong signal in about half of my home. Network 2 - I attached my airport to one of the LAN ports in the the back of the Fios router. I want to use my airport as a way to extend the range of my Fios wireless network. Is this possible?

Network 2 can effectively "extend" Network 1 if the AirPort is permanently connected to the Fios router using an Ethernet connection.
You would configure the AirPort to "create a wireless network" using exactly the same wireless network name, security settings and password as the Fios network. Additionally, the AirPort must be configured in Bridge Mode for this to work correctly.
The most difficult part of doing this will be to find the exact type of wireless security that the Fios router is using and then find a corresponding compatible match on the AirPort. If the settings do not match up exactly, you'll have two networks which will require separate log ons.
Configured correctly, your laptop will be able to "roam" from one area of the house to another and stay on the same network. That's why this type of setup is called a "roaming network".
If you can locate the security settings for the Fios router and post back with that info, we can provide you with a step by step configuration for the AirPort if you need it.

Help: Using Airport Express to extend the range of Airport Extreme

I am trying to use the Airport Express to extend the range of the network created by my Airport Extreme. The Express works in terms of streaming music from iTunes on the PC connected to th Extreme.
However, I am trying to run a short Cat-5 cable out of the Express to a nearby PC in order to have access to the internet. If the Express is recognized by the Extreme and can play music through connected stereo cables, why can I get an internet connection through the LAN port..??
Here's a real basic representation of my connections...
Cable Modem >>-- Cat5 -->> Airport Extreme >>-- Wireless -->> Airport Express >>-- Cat5 -->>PC#2

To wirelessly extend the range between two AirPorts, you need to configure them in a Wireless Distribution System (WDS).
To facilitate the WDS set up, try the following:
o Perform a "hard" reset on the AirPort Extreme Base Stations & a "factory default" reset on the AirPort Express Base Stations (AX) before setting up the WDS.
o Place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete.
o To avoid having to "switch" wireless networks during the WDS setup, attach each of the remote/relay base station, via an Ethernet cable, to the main base station. Of course, this would be dependent on the AirPort types used for the main/relays/remotes.
o Be sure to jot down the MAC addresses for each of the base stations to be used in the WDS as these will be required during the setup.
o When enabling wireless encryption, configure the relay/remote base stations first and the main base station last.

I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

I want to extend the range of my Time Capsule, can I use Universal WiFi Range Extender, 4-port WiFi Adapter WN2000RPT?

A universal may work but reliability tends to be poor..
You are much better using another airport .. extreme or express.. even a second hand older one.
Or do not use wireless bridge or repeater.. simply run ethernet or use EOP adapters to a second WAP run independently of the main router.. it is far more reliable and far faster solution .. wireless bridge/repeater will halve your wireless speed.

Can I use an airport express to add airplay to (and extend the range of) a network with a netgear N750 Router?

I have a Netgear N750 router. Can I buy an airport express and configure it to extend the range of my current network and allow me to use AirPlay from anywhere on that SSID?

You can configure the AirPort Express to "join" the wireless network that is being provided by the Netgear router for use with AirTunes.
But, the Express will not be able to "extend" the range of your wireless network.
The "extend a wireless network" feature only works if you have an Apple router as your main device. This feature is not compatible with devices from other manufacturers.

Using an Airport express to extend the range of my neighbor'd Belkin Pre-N

My wife just got an iMac 17" core duo and it is now a paperweight! She has been unable to get a signal from our neighbor's Belkin pre-n wreless router (I bought it thinking it would increase the range of the signal:(). She has an airport express, is there anyway to turnit into a bridge? If not what are my options for extending the range of the Wireless capabilities of the iMac?

Cgjheru, Welcome to the discussion area!
My wife just got an iMac 17" core duo and it is now a paperweight!
Why do you consider it a paperweight?
She has an airport express, is there anyway to turnit into a bridge?
To do this, you must use WDS to connect the AirPort Express wirelessly to another base station. This apparently works with only 2 Belkin devices (F5D7230-4 and F5D7231). If your neighbor has one of those devices it may work.
Does your neighbor know that you are trying to connect to their network?

Can i extend the range of an airport extreme with another airport extreme and use the ports on the airport extreme i used to extend the network?

That seems like a complicated question.
I have a Time Capsule (which the HD *****, but that is matter for another discussion) and want to extend the range with an Airport Extreme because I have 2 devices in one room that do not do wireless but have Ethernet ports.
The room has iffy WiFy connectivity too.
I want to know if the 3 ports on the Airport Extreme still work after configuring it as an extender rather than a router.

The thing is that I want to know if I can put the Airport Extreme at the edge of the room where the existing Base does not reach.
This will not work.
Remember, an "extending" AirPort can only extend the quality of wireless signal that it receives. For that reason, it must be located where it can receive a strong wireless signal in order to work effectively.
For example, let's say that your "main" router was on one end of the house and you want to extend the signal to reach the other end of the house. In this case, you would locate the "extending" AirPort about half way between the main router and the other side of the house.

Using AE to extend the range of a DLINK WR

Similar Messages

Maybe you are looking for