Using Air Drop - Wired and Wireless

I am connected to the internet via wire. But to use Air Drop I need to have Wi-fi on.  This configuration is for my MBP 15" early 2011 running OS X 10.9.1
Can I have my wi-fi on and remain connected primarily to the Net via the wire that goes to a wireless router?  Will this set up a conflict(s) when doing my work, getting email, browsing, etc?
Thanks
geomon

geomon wrote:
Can I have my wi-fi on and remain connected primarily to the Net via the wire that goes to a wireless router?  Will this set up a conflict(s) when doing my work, getting email, browsing, etc?
Yes you can. No it won't conflict
Set the order of service in System Preferences / Network so that Ethernet is at the top of the list and WiFi is next.

Similar Messages

  • How to use airport express wired and wireless at the same time

    Hi,
    I currently have FiOS with Verizon, they ran a coax cable to the Verizon router. I didn't ask them to switch to CAT6 cable since I have an airport extreme base station and an airport express base station (both are the newest generation). I ran a CAT6 cable from the Verizon FiOS router to my AEBS (extreme) to make it the default wireless router. The Verizon router and extreme are in one room. Now, the Airport express is in my living. I'd like to extend the wireless network from the extreme. However, I can't seem to find a way to use both wired and wireless from the airport express at the same time. It's now either via wired, or wiresless. So is there a way to get both work?

    Can you tell us if you used Apple's instructions for a "roaming" network?
    http://support.apple.com/kb/HT4260
    Although the instructions picture a 2nd AirPort Extreme in the illustrations, the setup instructions would be exactly the same for an AirPort Express.

  • I have a new Macbook Air 2012, Apple TV 2 and I have tried wired and wireless connections both result in stuttering during video airplay to the ATV2.

    I have a new Macbook Air 2012, Apple TV 2 and I have tried wired and wireless connections both still result in stuttering during video airplay to the ATV2.
    I have even bought a new Airport Extreme Router just to confirm it is not the router and it still didn't help.
    I have brought all items in the same room with wired connections and still same issue.
    I was thinking maybe ATV 3 might help since it has 2 wifi antennas and faster processor.
    Have tried everything I could think of.
    This was one of the main reasons I bought a Macbook Air for this airplay feature. Very frustrated.
    Any thoughts; any other suggestions would be greatly appreciated.
    Thanks

    Thanks for the suggestion.
    I also disabled Norton Firewall and restarted the Air and Now I'm able to use Air Play.
    I know that the Apple remedy said that to do that in the support article, but I totally forgot I had that enabled..
    It actually works. I can even stream to the Apple TV now through my MacBook Air.
    BTW, Go into setting under the ATV, and click on update...you'll see that there was another update avaialble for the last gen of ATV...
    It does have to restart twice..I guess once to download and and nother to apply.

  • I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

    I recently bought two iMac quad core i5 processor speed 2.5 Ghz. Every time I use Air Drop and I send a file from one iMac to the other, a black curtain drops and I am asked to restart the computer!!! What can I do?

    That's a kernel panic and indicates some sort of problem either with the computer's hardware or software. Visit The XLab FAQs and read the FAQ on diagnosing kernel panics. It would help to post the panic log: Mac OS X- How to log a kernel panic.
    Meanwhile, try booting the computers into Safe Mode then restarting normally. If this is simply a disk repair or cache file problem then this may fix it.
    You can also try creating a new admin account on each computer then booting into the new account. This would help determine if the problem is related to a bad file in the user accounts.

  • WRT54G2 keeps dropping connection, wired and wireless

    I have a Scientific Atlanta modem with WRT54G2 wireless router. Both are around 2 years old. In the past few months, I keep getting periodic connection drop, couple times a day, day on day off. I have 2 wired connections and 3 wireless connections to the router. I check with my internet provider, Cox, they say my connection is fine. So I guess it's the router or modem problem.
    The funny thing is when connection drop, I cannot access any web sites via wired and wireless. However, my downloads in iTune are still running fine at full speed. I have to unplug and replug both router and modem for it to work again.
    Is there a way to fix this? or do i need to buy a new router or modem?
    Solved!
    Go to Solution.

    It's possible that Cox only recognizes the router's MAC address, probably the reason why you can't connect directly.
    Anyway, try to lower the MTU settings on the router.

  • Wired and Wireless sometimes work (mostly not) after update.

    So I have an issue with my network connection.  It sometimes works, sometimes doesn't (mostly doesn't).  This is for both wired and wireless.  This started to happen a couple of days ago after an update.  I had not updated for about a month prior.  Prior to the update I used WICD and it worked just fine with no problems.  I have no exotic hardware (ipw2200 using its firmware, dell xps gen2 notebook) and I set up everything about 6 months ago based on all the wikis.  I have a dlink dir-825 router.  Both wired and wireless connections work in windows every boot so it's not hardware.
    I've included as much info as possible... sorry for the length.
    Things I've tried:
    Removing the ! from the INTERFACES=(!eth0 !eth1) in rc.conf
    Removing netfs from the daemons
    all the hostnames match in hosts and rc.conf
    Here is my rc.conf
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.utf8"
    HARDWARECLOCK="local"
    USEDIRECTISA="no"
    TIMEZONE="America/New_York"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
    # MOD_BLACKLIST: Prevent udev from loading these modules
    # MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
    # NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
    MOD_AUTOLOAD="yes"
    #MOD_BLACKLIST=() #deprecated
    MODULES=(acpi-cpufreq cpufreq_ondemand cpufreq_powersave cpufreq_conservative cpufreq_userspace fuse ipw2200)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="yes"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="stupendiousman"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    #   - prefix an entry in INTERFACES with a ! to disable it
    #   - no hyphens in your interface names - Bash doesn't like it
    # DHCP:     Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    #eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
    INTERFACES=(!eth0 !eth1)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    #   - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.0.1"
    ROUTES=(!gateway)
    # Enable these network profiles at boot-up.  These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    #   - set to 'menu' to present a menu during boot-up (dialog package required)
    #   - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This now requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    #   - prefix a daemon with a ! to disable it
    #   - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng hal cpufreq wicd alsa crond fam bluetooth)
    Here is my hosts
    # /etc/hosts: static lookup table for host names
    #<ip-address>   <hostname.domain.org>   <hostname>
    127.0.0.1               localhost.localdomain   localhost stupendiousman
    # End of file
    Here is my mkinitcpio.conf
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run.  Advanced users may wish to specify all system modules
    # in this array.  For instance:
    #     MODULES="piix ide_disk reiserfs"
    MODULES=""
    CRYPTO_MODULES="aes_generic aes_i586 dm_crypt xts"
    # BINARIES
    # This setting includes, into the CPIO image, and additional
    # binaries a given user may wish.  This is run first, so may
    # be used to override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten is already added)
    # BINARIES are dependancy parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in anyway.  This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options,
    # like so:
    #    FILES="/etc/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file.  The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'modload' may be used in place of 'udev', but is not recommended
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    #    This setup specifies all modules in the MODULES setting above.
    #    No raid, lvm2, or encrypted root is needed.
    #    HOOKS="base"
    #    This setup will autodetect all modules for your system and should
    #    work as a sane default
    #    HOOKS="base udev autodetect pata scsi sata filesystems"
    #    This is identical to the above, except the old ide subsystem is
    #    used for IDE devices instead of the new pata subsystem.
    #    HOOKS="base udev autodetect ide scsi sata filesystems"
    #    This setup will generate a 'full' image which supports most systems.
    #    No autodetection is done.
    #    HOOKS="base udev pata scsi sata usb filesystems"
    #    This setup assembles an pata raid array with an encrypted root FS.
    #    Note: See 'mkinitcpio -H raid' for more information on raid devices.
    #    HOOKS="base udev pata raid encrypt filesystems"
    #    This setup loads an lvm2 volume group on a usb device.
    #    HOOKS="base udev usb lvm2 filesystems"
    HOOKS="base udev autodetect pata scsi sata encrypt lvm2 resume filesystems firmware"
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
    00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
    00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
    00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
    00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
    00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
    00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation NV41.9 [GeForce Go 6800 Ultra] (rev a2)
    03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705M_2 Gigabit Ethernet (rev 03)
    03:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b3)
    03:01.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 08)
    03:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 17)
    03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
    ifconfig returns:
    [rick@stupendiousman ~]$ ifconfig
    eth0      Link encap:Ethernet  HWaddr 00:12:F0:3E:CA:66 
              inet6 addr: fe80::212:f0ff:fe3e:ca66/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:4454 (4.3 Kb)
              Interrupt:17 Base address:0x6000 Memory:dcfef000-dcfeffff
    eth1      Link encap:Ethernet  HWaddr 00:11:43:72:B5:96 
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
              Interrupt:18
    lo        Link encap:Local Loopback 
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:280 (280.0 b)  TX bytes:280 (280.0 b)
    If I do a iwlist scan I get:
    [rick@stupendiousman ~]$ iwlist scan
    lo        Interface doesn't support scanning.
    eth0      No scan results
    eth1      Interface doesn't support scanning.
    pan0      Interface doesn't support scanning.
    Here is a portion of my /var/log/wicd/wicd.log
    2009/08/15 09:19:29 :: ---------------------------
    2009/08/15 09:19:29 :: wicd initializing...
    2009/08/15 09:19:29 :: ---------------------------
    2009/08/15 09:19:29 :: wicd is version 1.6.2 436
    2009/08/15 09:19:29 :: setting backend to external
    2009/08/15 09:19:29 :: trying to load backend external
    2009/08/15 09:19:30 :: successfully loaded backend external
    2009/08/15 09:19:30 :: trying to load backend external
    2009/08/15 09:19:30 :: successfully loaded backend external
    2009/08/15 09:19:30 :: Automatically detected wireless interface eth0
    2009/08/15 09:19:30 :: setting wireless interface eth1
    2009/08/15 09:19:30 :: automatically detected wired interface eth1
    2009/08/15 09:19:30 :: setting wired interface eth0
    2009/08/15 09:19:30 :: setting wpa driver wext
    2009/08/15 09:19:30 :: setting use global dns to False
    2009/08/15 09:19:30 :: setting global dns
    2009/08/15 09:19:30 :: global dns servers are None None None
    2009/08/15 09:19:30 :: domain is None
    2009/08/15 09:19:30 :: search domain is None
    2009/08/15 09:19:30 :: setting automatically reconnect when connection drops True
    2009/08/15 09:19:30 :: Setting dhcp client to 0
    2009/08/15 09:19:30 :: Wireless configuration file found...
    2009/08/15 09:19:30 :: Wired configuration file found...
    2009/08/15 09:19:30 :: chmoding configuration files 0600...
    2009/08/15 09:19:30 :: chowning configuration files root:root...
    2009/08/15 09:19:30 :: Using wireless interface...eth1
    2009/08/15 09:19:30 :: Using wired interface...eth0
    2009/08/15 09:19:36 :: Autoconnecting...
    2009/08/15 09:19:39 :: Attempting to autoconnect with wired interface...
    2009/08/15 09:19:39 :: Putting interface down
    2009/08/15 09:19:39 :: Releasing DHCP leases...
    2009/08/15 09:19:39 :: Setting false IP...
    2009/08/15 09:19:39 :: Flushing the routing table...
    2009/08/15 09:19:39 :: Putting interface up...
    2009/08/15 09:19:39 :: Running DHCP
    2009/08/15 09:19:39 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:19:39 ::
    2009/08/15 09:19:39 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:19:39 ::
    2009/08/15 09:20:09 :: dhcpcd: timed out
    2009/08/15 09:20:09 ::
    2009/08/15 09:20:09 :: DHCP connection failed
    2009/08/15 09:20:09 :: exiting connection thread
    2009/08/15 09:20:11 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 09:20:11 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 09:20:11 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:21:03 :: trying to load backend ioctl
    2009/08/15 09:21:03 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
    2009/08/15 09:21:03 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
    2009/08/15 09:21:03 :: trying to load backend external
    2009/08/15 09:21:10 :: Putting interface down
    2009/08/15 09:21:10 :: Releasing DHCP leases...
    2009/08/15 09:21:10 :: Setting false IP...
    2009/08/15 09:21:10 :: Flushing the routing table...
    2009/08/15 09:21:10 :: Putting interface up...
    2009/08/15 09:21:10 :: Running DHCP
    2009/08/15 09:21:10 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:21:10 ::
    2009/08/15 09:21:10 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:21:10 ::
    2009/08/15 09:21:40 :: dhcpcd: timed out
    2009/08/15 09:21:40 ::
    2009/08/15 09:21:40 :: DHCP connection failed
    2009/08/15 09:21:40 :: exiting connection thread
    2009/08/15 09:21:40 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:22:28 :: Putting interface down
    2009/08/15 09:22:28 :: Releasing DHCP leases...
    2009/08/15 09:22:28 :: Setting false IP...
    2009/08/15 09:22:28 :: Flushing the routing table...
    2009/08/15 09:22:28 :: Putting interface up...
    2009/08/15 09:22:28 :: Running DHCP
    2009/08/15 09:22:28 :: dhcpcd: version 5.0.6 starting
    2009/08/15 09:22:28 ::
    2009/08/15 09:22:28 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 09:22:28 ::
    2009/08/15 09:22:58 :: dhcpcd: timed out
    2009/08/15 09:22:58 ::
    2009/08/15 09:22:58 :: DHCP connection failed
    2009/08/15 09:22:58 :: exiting connection thread
    2009/08/15 09:22:58 :: Sending connection attempt result dhcp_failed
    2009/08/15 09:23:17 :: Daemon going down, killing wicd-monitor...
    2009/08/15 09:23:17 :: Removing PID file...
    2009/08/15 09:23:17 :: Shutting down...
    2009/08/15 13:16:59 :: ---------------------------
    2009/08/15 13:16:59 :: wicd initializing...
    2009/08/15 13:16:59 :: ---------------------------
    2009/08/15 13:16:59 :: wicd is version 1.6.2 436
    2009/08/15 13:16:59 :: setting backend to external
    2009/08/15 13:16:59 :: trying to load backend external
    2009/08/15 13:17:00 :: successfully loaded backend external
    2009/08/15 13:17:00 :: trying to load backend external
    2009/08/15 13:17:00 :: successfully loaded backend external
    2009/08/15 13:17:00 :: Automatically detected wireless interface eth0
    2009/08/15 13:17:00 :: setting wireless interface eth1
    2009/08/15 13:17:00 :: automatically detected wired interface eth1
    2009/08/15 13:17:00 :: setting wired interface eth0
    2009/08/15 13:17:00 :: setting wpa driver wext
    2009/08/15 13:17:00 :: setting use global dns to False
    2009/08/15 13:17:00 :: setting global dns
    2009/08/15 13:17:00 :: global dns servers are None None None
    2009/08/15 13:17:00 :: domain is None
    2009/08/15 13:17:00 :: search domain is None
    2009/08/15 13:17:00 :: setting automatically reconnect when connection drops True
    2009/08/15 13:17:00 :: Setting dhcp client to 0
    2009/08/15 13:17:00 :: Wireless configuration file found...
    2009/08/15 13:17:00 :: Wired configuration file found...
    2009/08/15 13:17:00 :: chmoding configuration files 0600...
    2009/08/15 13:17:00 :: chowning configuration files root:root...
    2009/08/15 13:17:00 :: Using wireless interface...eth1
    2009/08/15 13:17:00 :: Using wired interface...eth0
    2009/08/15 13:17:06 :: Autoconnecting...
    2009/08/15 13:17:09 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:17:09 :: Putting interface down
    2009/08/15 13:17:09 :: Releasing DHCP leases...
    2009/08/15 13:17:09 :: Setting false IP...
    2009/08/15 13:17:09 :: Flushing the routing table...
    2009/08/15 13:17:09 :: Putting interface up...
    2009/08/15 13:17:09 :: Running DHCP
    2009/08/15 13:17:09 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:17:09 ::
    2009/08/15 13:17:09 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:17:09 ::
    2009/08/15 13:17:39 :: dhcpcd: timed out
    2009/08/15 13:17:39 ::
    2009/08/15 13:17:39 :: DHCP connection failed
    2009/08/15 13:17:39 :: exiting connection thread
    2009/08/15 13:17:41 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:17:41 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:17:41 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:18:10 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:18:10 :: Removing PID file...
    2009/08/15 13:18:10 :: Shutting down...
    2009/08/15 13:19:01 :: ---------------------------
    2009/08/15 13:19:01 :: wicd initializing...
    2009/08/15 13:19:01 :: ---------------------------
    2009/08/15 13:19:01 :: wicd is version 1.6.2 436
    2009/08/15 13:19:01 :: setting backend to external
    2009/08/15 13:19:01 :: trying to load backend external
    2009/08/15 13:19:02 :: successfully loaded backend external
    2009/08/15 13:19:02 :: trying to load backend external
    2009/08/15 13:19:02 :: successfully loaded backend external
    2009/08/15 13:19:02 :: Automatically detected wireless interface eth0
    2009/08/15 13:19:02 :: setting wireless interface eth1
    2009/08/15 13:19:02 :: automatically detected wired interface eth1
    2009/08/15 13:19:02 :: setting wired interface eth0
    2009/08/15 13:19:02 :: setting wpa driver wext
    2009/08/15 13:19:02 :: setting use global dns to False
    2009/08/15 13:19:02 :: setting global dns
    2009/08/15 13:19:02 :: global dns servers are None None None
    2009/08/15 13:19:02 :: domain is None
    2009/08/15 13:19:02 :: search domain is None
    2009/08/15 13:19:02 :: setting automatically reconnect when connection drops True
    2009/08/15 13:19:02 :: Setting dhcp client to 0
    2009/08/15 13:19:02 :: Wireless configuration file found...
    2009/08/15 13:19:02 :: Wired configuration file found...
    2009/08/15 13:19:02 :: chmoding configuration files 0600...
    2009/08/15 13:19:02 :: chowning configuration files root:root...
    2009/08/15 13:19:02 :: Using wireless interface...eth1
    2009/08/15 13:19:02 :: Using wired interface...eth0
    2009/08/15 13:19:08 :: Autoconnecting...
    2009/08/15 13:19:11 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:19:11 :: Putting interface down
    2009/08/15 13:19:11 :: Releasing DHCP leases...
    2009/08/15 13:19:11 :: Setting false IP...
    2009/08/15 13:19:11 :: Flushing the routing table...
    2009/08/15 13:19:11 :: Putting interface up...
    2009/08/15 13:19:11 :: Running DHCP
    2009/08/15 13:19:11 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:19:11 ::
    2009/08/15 13:19:11 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:19:11 ::
    2009/08/15 13:19:41 :: dhcpcd: timed out
    2009/08/15 13:19:41 ::
    2009/08/15 13:19:41 :: DHCP connection failed
    2009/08/15 13:19:41 :: exiting connection thread
    2009/08/15 13:19:43 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:19:43 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:19:43 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:30:36 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:30:36 :: Removing PID file...
    2009/08/15 13:30:36 :: Shutting down...
    2009/08/15 13:31:29 :: ---------------------------
    2009/08/15 13:31:29 :: wicd initializing...
    2009/08/15 13:31:29 :: ---------------------------
    2009/08/15 13:31:29 :: wicd is version 1.6.2 436
    2009/08/15 13:31:29 :: setting backend to external
    2009/08/15 13:31:29 :: trying to load backend external
    2009/08/15 13:31:30 :: successfully loaded backend external
    2009/08/15 13:31:30 :: trying to load backend external
    2009/08/15 13:31:30 :: successfully loaded backend external
    2009/08/15 13:31:30 :: Automatically detected wireless interface eth0
    2009/08/15 13:31:30 :: setting wireless interface eth1
    2009/08/15 13:31:30 :: automatically detected wired interface eth1
    2009/08/15 13:31:30 :: setting wired interface eth0
    2009/08/15 13:31:30 :: setting wpa driver wext
    2009/08/15 13:31:30 :: setting use global dns to False
    2009/08/15 13:31:30 :: setting global dns
    2009/08/15 13:31:30 :: global dns servers are None None None
    2009/08/15 13:31:30 :: domain is None
    2009/08/15 13:31:30 :: search domain is None
    2009/08/15 13:31:30 :: setting automatically reconnect when connection drops True
    2009/08/15 13:31:30 :: Setting dhcp client to 0
    2009/08/15 13:31:30 :: Wireless configuration file found...
    2009/08/15 13:31:30 :: Wired configuration file found...
    2009/08/15 13:31:30 :: chmoding configuration files 0600...
    2009/08/15 13:31:30 :: chowning configuration files root:root...
    2009/08/15 13:31:30 :: Using wireless interface...eth1
    2009/08/15 13:31:30 :: Using wired interface...eth0
    2009/08/15 13:31:37 :: Autoconnecting...
    2009/08/15 13:31:39 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:31:39 :: Putting interface down
    2009/08/15 13:31:39 :: Releasing DHCP leases...
    2009/08/15 13:31:39 :: Setting false IP...
    2009/08/15 13:31:39 :: Flushing the routing table...
    2009/08/15 13:31:39 :: Putting interface up...
    2009/08/15 13:31:39 :: Running DHCP
    2009/08/15 13:31:39 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:31:39 ::
    2009/08/15 13:31:40 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:31:40 ::
    2009/08/15 13:32:09 :: dhcpcd: timed out
    2009/08/15 13:32:09 ::
    2009/08/15 13:32:09 :: DHCP connection failed
    2009/08/15 13:32:09 :: exiting connection thread
    2009/08/15 13:32:12 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:32:12 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:32:12 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:38:00 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:38:00 :: Removing PID file...
    2009/08/15 13:38:00 :: Shutting down...
    2009/08/15 13:39:19 :: ---------------------------
    2009/08/15 13:39:19 :: wicd initializing...
    2009/08/15 13:39:19 :: ---------------------------
    2009/08/15 13:39:19 :: wicd is version 1.6.2 436
    2009/08/15 13:39:19 :: setting backend to external
    2009/08/15 13:39:19 :: trying to load backend external
    2009/08/15 13:39:20 :: successfully loaded backend external
    2009/08/15 13:39:20 :: trying to load backend external
    2009/08/15 13:39:20 :: successfully loaded backend external
    2009/08/15 13:39:20 :: Automatically detected wireless interface eth0
    2009/08/15 13:39:20 :: setting wireless interface eth1
    2009/08/15 13:39:20 :: automatically detected wired interface eth1
    2009/08/15 13:39:20 :: setting wired interface eth0
    2009/08/15 13:39:20 :: setting wpa driver wext
    2009/08/15 13:39:20 :: setting use global dns to False
    2009/08/15 13:39:20 :: setting global dns
    2009/08/15 13:39:20 :: global dns servers are None None None
    2009/08/15 13:39:20 :: domain is None
    2009/08/15 13:39:20 :: search domain is None
    2009/08/15 13:39:20 :: setting automatically reconnect when connection drops True
    2009/08/15 13:39:20 :: Setting dhcp client to 0
    2009/08/15 13:39:20 :: Wireless configuration file found...
    2009/08/15 13:39:20 :: Wired configuration file found...
    2009/08/15 13:39:20 :: chmoding configuration files 0600...
    2009/08/15 13:39:20 :: chowning configuration files root:root...
    2009/08/15 13:39:20 :: Using wireless interface...eth1
    2009/08/15 13:39:20 :: Using wired interface...eth0
    2009/08/15 13:39:27 :: Autoconnecting...
    2009/08/15 13:39:29 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:39:29 :: Putting interface down
    2009/08/15 13:39:29 :: Releasing DHCP leases...
    2009/08/15 13:39:29 :: Setting false IP...
    2009/08/15 13:39:29 :: Flushing the routing table...
    2009/08/15 13:39:29 :: Putting interface up...
    2009/08/15 13:39:29 :: Running DHCP
    2009/08/15 13:39:29 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:39:29 ::
    2009/08/15 13:39:30 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:39:30 ::
    2009/08/15 13:39:59 :: dhcpcd: timed out
    2009/08/15 13:39:59 ::
    2009/08/15 13:39:59 :: DHCP connection failed
    2009/08/15 13:39:59 :: exiting connection thread
    2009/08/15 13:40:02 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:40:02 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:40:02 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:45:10 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:45:10 :: Removing PID file...
    2009/08/15 13:45:10 :: Shutting down...
    2009/08/15 13:46:13 :: ---------------------------
    2009/08/15 13:46:13 :: wicd initializing...
    2009/08/15 13:46:13 :: ---------------------------
    2009/08/15 13:46:13 :: wicd is version 1.6.2 436
    2009/08/15 13:46:13 :: setting backend to external
    2009/08/15 13:46:13 :: trying to load backend external
    2009/08/15 13:46:14 :: successfully loaded backend external
    2009/08/15 13:46:14 :: trying to load backend external
    2009/08/15 13:46:14 :: successfully loaded backend external
    2009/08/15 13:46:14 :: Automatically detected wireless interface eth1
    2009/08/15 13:46:14 :: setting wireless interface eth1
    2009/08/15 13:46:14 :: automatically detected wired interface eth0
    2009/08/15 13:46:14 :: setting wired interface eth0
    2009/08/15 13:46:14 :: setting wpa driver wext
    2009/08/15 13:46:14 :: setting use global dns to False
    2009/08/15 13:46:14 :: setting global dns
    2009/08/15 13:46:14 :: global dns servers are None None None
    2009/08/15 13:46:14 :: domain is None
    2009/08/15 13:46:14 :: search domain is None
    2009/08/15 13:46:14 :: setting automatically reconnect when connection drops True
    2009/08/15 13:46:14 :: Setting dhcp client to 0
    2009/08/15 13:46:14 :: Wireless configuration file found...
    2009/08/15 13:46:14 :: Wired configuration file found...
    2009/08/15 13:46:14 :: chmoding configuration files 0600...
    2009/08/15 13:46:14 :: chowning configuration files root:root...
    2009/08/15 13:46:14 :: Using wireless interface...eth1
    2009/08/15 13:46:14 :: Using wired interface...eth0
    2009/08/15 13:46:20 :: Autoconnecting...
    2009/08/15 13:46:22 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:46:22 :: trying to automatically connect to...101
    2009/08/15 13:46:22 :: Connecting to wireless network 101
    2009/08/15 13:46:23 :: Putting interface down
    2009/08/15 13:46:23 :: Releasing DHCP leases...
    2009/08/15 13:46:23 :: Setting false IP...
    2009/08/15 13:46:23 :: Stopping wpa_supplicant
    2009/08/15 13:46:23 :: Flushing the routing table...
    2009/08/15 13:46:23 :: Putting interface up...
    2009/08/15 13:46:23 :: Generating psk...
    2009/08/15 13:46:23 :: Attempting to authenticate...
    2009/08/15 13:46:34 :: Running DHCP
    2009/08/15 13:46:34 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:46:34 ::
    2009/08/15 13:46:34 :: dhcpcd: eth1: broadcasting for a lease
    2009/08/15 13:46:34 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:35 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:46:35 ::
    2009/08/15 13:46:38 :: dhcpcd: eth1: carrier lost
    2009/08/15 13:46:38 ::
    2009/08/15 13:46:40 :: dhcpcd: eth1: carrier acquired
    2009/08/15 13:46:40 ::
    2009/08/15 13:46:40 :: dhcpcd: eth1: broadcasting for a lease
    2009/08/15 13:46:40 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: offered 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:45 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:46:45 ::
    2009/08/15 13:46:51 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 :: dhcpcd: forking to background
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 ::
    2009/08/15 13:46:51 :: DHCP connection successful
    2009/08/15 13:46:51 :: Connecting thread exiting.
    2009/08/15 13:46:55 :: Sending connection attempt result Success
    2009/08/15 13:48:50 :: Putting interface down
    2009/08/15 13:48:50 :: Releasing DHCP leases...
    2009/08/15 13:48:50 :: Setting false IP...
    2009/08/15 13:48:51 :: Flushing the routing table...
    2009/08/15 13:48:51 :: Putting interface up...
    2009/08/15 13:48:51 :: Running DHCP
    2009/08/15 13:48:51 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:51 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:51 :: dhcpcd: eth0: carrier lost
    2009/08/15 13:48:51 ::
    2009/08/15 13:48:53 :: dhcpcd: eth0: carrier acquired
    2009/08/15 13:48:53 ::
    2009/08/15 13:48:53 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:48:53 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: offered 192.168.0.193 from 192.168.0.1
    2009/08/15 13:48:54 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: acknowledged 192.168.0.193 from 192.168.0.1
    2009/08/15 13:48:54 ::
    2009/08/15 13:48:54 :: dhcpcd: eth0: checking for 192.168.0.193
    2009/08/15 13:48:54 ::
    2009/08/15 13:49:00 :: dhcpcd: eth0: leased 192.168.0.193 for 86400 seconds
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 :: dhcpcd: forking to background
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 ::
    2009/08/15 13:49:00 :: DHCP connection successful
    2009/08/15 13:49:00 :: Connecting thread exiting.
    2009/08/15 13:49:00 :: Sending connection attempt result Success
    2009/08/15 13:53:46 :: Connecting to wireless network 102
    2009/08/15 13:53:47 :: Putting interface down
    2009/08/15 13:53:47 :: Releasing DHCP leases...
    2009/08/15 13:53:47 :: Setting false IP...
    2009/08/15 13:53:47 :: Stopping wpa_supplicant
    2009/08/15 13:53:47 :: Flushing the routing table...
    2009/08/15 13:53:47 :: Putting interface up...
    2009/08/15 13:53:47 :: Generating psk...
    2009/08/15 13:53:47 :: Attempting to authenticate...
    2009/08/15 13:54:03 :: Running DHCP
    2009/08/15 13:54:03 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:03 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:54:03 ::
    2009/08/15 13:54:05 :: dhcpcd: eth1: carrier lost
    2009/08/15 13:54:05 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: carrier acquired
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:06 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 13:54:06 ::
    2009/08/15 13:54:11 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 :: dhcpcd: forking to background
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 ::
    2009/08/15 13:54:11 :: DHCP connection successful
    2009/08/15 13:54:11 :: Connecting thread exiting.
    2009/08/15 13:54:11 :: Sending connection attempt result Success
    2009/08/15 13:55:03 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:55:03 :: Removing PID file...
    2009/08/15 13:55:03 :: Shutting down...
    2009/08/15 13:55:52 :: ---------------------------
    2009/08/15 13:55:52 :: wicd initializing...
    2009/08/15 13:55:52 :: ---------------------------
    2009/08/15 13:55:52 :: wicd is version 1.6.2 436
    2009/08/15 13:55:52 :: setting backend to external
    2009/08/15 13:55:52 :: trying to load backend external
    2009/08/15 13:55:53 :: successfully loaded backend external
    2009/08/15 13:55:53 :: trying to load backend external
    2009/08/15 13:55:53 :: successfully loaded backend external
    2009/08/15 13:55:53 :: Automatically detected wireless interface eth0
    2009/08/15 13:55:53 :: setting wireless interface eth1
    2009/08/15 13:55:53 :: automatically detected wired interface eth1
    2009/08/15 13:55:53 :: setting wired interface eth0
    2009/08/15 13:55:53 :: setting wpa driver wext
    2009/08/15 13:55:53 :: setting use global dns to False
    2009/08/15 13:55:53 :: setting global dns
    2009/08/15 13:55:53 :: global dns servers are None None None
    2009/08/15 13:55:53 :: domain is None
    2009/08/15 13:55:53 :: search domain is None
    2009/08/15 13:55:53 :: setting automatically reconnect when connection drops True
    2009/08/15 13:55:53 :: Setting dhcp client to 0
    2009/08/15 13:55:53 :: Wireless configuration file found...
    2009/08/15 13:55:53 :: Wired configuration file found...
    2009/08/15 13:55:53 :: chmoding configuration files 0600...
    2009/08/15 13:55:53 :: chowning configuration files root:root...
    2009/08/15 13:55:53 :: Using wireless interface...eth1
    2009/08/15 13:55:53 :: Using wired interface...eth0
    2009/08/15 13:55:59 :: Autoconnecting...
    2009/08/15 13:56:02 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:56:02 :: Putting interface down
    2009/08/15 13:56:02 :: Releasing DHCP leases...
    2009/08/15 13:56:02 :: Setting false IP...
    2009/08/15 13:56:02 :: Flushing the routing table...
    2009/08/15 13:56:02 :: Putting interface up...
    2009/08/15 13:56:02 :: Running DHCP
    2009/08/15 13:56:02 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:56:02 ::
    2009/08/15 13:56:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:56:02 ::
    2009/08/15 13:56:12 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:56:12 ::
    2009/08/15 13:56:32 :: dhcpcd: timed out
    2009/08/15 13:56:32 ::
    2009/08/15 13:56:32 :: DHCP connection failed
    2009/08/15 13:56:32 :: exiting connection thread
    2009/08/15 13:56:34 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:56:34 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:56:34 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:57:31 :: Daemon going down, killing wicd-monitor...
    2009/08/15 13:57:31 :: Removing PID file...
    2009/08/15 13:57:31 :: Shutting down...
    2009/08/15 13:57:32 :: ---------------------------
    2009/08/15 13:57:32 :: wicd initializing...
    2009/08/15 13:57:32 :: ---------------------------
    2009/08/15 13:57:32 :: wicd is version 1.6.2 436
    2009/08/15 13:57:32 :: setting backend to external
    2009/08/15 13:57:32 :: trying to load backend external
    2009/08/15 13:57:32 :: successfully loaded backend external
    2009/08/15 13:57:32 :: trying to load backend external
    2009/08/15 13:57:32 :: successfully loaded backend external
    2009/08/15 13:57:32 :: Automatically detected wireless interface eth0
    2009/08/15 13:57:32 :: setting wireless interface eth1
    2009/08/15 13:57:32 :: automatically detected wired interface eth1
    2009/08/15 13:57:32 :: setting wired interface eth0
    2009/08/15 13:57:32 :: setting wpa driver wext
    2009/08/15 13:57:32 :: setting use global dns to False
    2009/08/15 13:57:32 :: setting global dns
    2009/08/15 13:57:32 :: global dns servers are None None None
    2009/08/15 13:57:32 :: domain is None
    2009/08/15 13:57:32 :: search domain is None
    2009/08/15 13:57:32 :: setting automatically reconnect when connection drops True
    2009/08/15 13:57:32 :: Setting dhcp client to 0
    2009/08/15 13:57:32 :: Wireless configuration file found...
    2009/08/15 13:57:32 :: Wired configuration file found...
    2009/08/15 13:57:32 :: chmoding configuration files 0600...
    2009/08/15 13:57:32 :: chowning configuration files root:root...
    2009/08/15 13:57:32 :: Using wireless interface...eth1
    2009/08/15 13:57:32 :: Using wired interface...eth0
    2009/08/15 13:57:38 :: Autoconnecting...
    2009/08/15 13:57:38 :: Putting interface down
    2009/08/15 13:57:38 :: Attempting to autoconnect with wired interface...
    2009/08/15 13:57:38 :: Releasing DHCP leases...
    2009/08/15 13:57:38 :: Setting false IP...
    2009/08/15 13:57:38 :: Flushing the routing table...
    2009/08/15 13:57:38 :: Putting interface up...
    2009/08/15 13:57:38 :: Running DHCP
    2009/08/15 13:57:38 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:57:38 ::
    2009/08/15 13:57:38 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:57:38 ::
    2009/08/15 13:57:48 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:57:48 ::
    2009/08/15 13:58:08 :: dhcpcd: timed out
    2009/08/15 13:58:08 ::
    2009/08/15 13:58:08 :: DHCP connection failed
    2009/08/15 13:58:08 :: exiting connection thread
    2009/08/15 13:58:08 :: Sending connection attempt result dhcp_failed
    2009/08/15 13:58:10 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 13:58:10 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 13:58:46 :: Putting interface down
    2009/08/15 13:58:46 :: Releasing DHCP leases...
    2009/08/15 13:58:46 :: Setting false IP...
    2009/08/15 13:58:46 :: Flushing the routing table...
    2009/08/15 13:58:46 :: Putting interface up...
    2009/08/15 13:58:46 :: Running DHCP
    2009/08/15 13:58:46 :: dhcpcd: version 5.0.6 starting
    2009/08/15 13:58:46 ::
    2009/08/15 13:58:46 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 13:58:46 ::
    2009/08/15 13:58:56 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 13:58:56 ::
    2009/08/15 13:59:16 :: dhcpcd: timed out
    2009/08/15 13:59:16 ::
    2009/08/15 13:59:16 :: DHCP connection failed
    2009/08/15 13:59:16 :: exiting connection thread
    2009/08/15 13:59:16 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:10:08 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:10:08 :: Removing PID file...
    2009/08/15 14:10:08 :: Shutting down...
    2009/08/15 14:10:59 :: ---------------------------
    2009/08/15 14:10:59 :: wicd initializing...
    2009/08/15 14:10:59 :: ---------------------------
    2009/08/15 14:10:59 :: wicd is version 1.6.2 436
    2009/08/15 14:10:59 :: setting backend to external
    2009/08/15 14:10:59 :: trying to load backend external
    2009/08/15 14:10:59 :: successfully loaded backend external
    2009/08/15 14:10:59 :: trying to load backend external
    2009/08/15 14:10:59 :: successfully loaded backend external
    2009/08/15 14:10:59 :: Automatically detected wireless interface eth0
    2009/08/15 14:10:59 :: setting wireless interface eth1
    2009/08/15 14:10:59 :: automatically detected wired interface eth1
    2009/08/15 14:10:59 :: setting wired interface eth0
    2009/08/15 14:10:59 :: setting wpa driver wext
    2009/08/15 14:10:59 :: setting use global dns to False
    2009/08/15 14:10:59 :: setting global dns
    2009/08/15 14:10:59 :: global dns servers are None None None
    2009/08/15 14:10:59 :: domain is None
    2009/08/15 14:10:59 :: search domain is None
    2009/08/15 14:10:59 :: setting automatically reconnect when connection drops True
    2009/08/15 14:10:59 :: Setting dhcp client to 0
    2009/08/15 14:10:59 :: Wireless configuration file found...
    2009/08/15 14:10:59 :: Wired configuration file found...
    2009/08/15 14:10:59 :: chmoding configuration files 0600...
    2009/08/15 14:10:59 :: chowning configuration files root:root...
    2009/08/15 14:10:59 :: Using wireless interface...eth1
    2009/08/15 14:10:59 :: Using wired interface...eth0
    2009/08/15 14:11:06 :: Autoconnecting...
    2009/08/15 14:11:09 :: Attempting to autoconnect with wired interface...
    2009/08/15 14:11:09 :: Putting interface down
    2009/08/15 14:11:09 :: Releasing DHCP leases...
    2009/08/15 14:11:09 :: Setting false IP...
    2009/08/15 14:11:09 :: Flushing the routing table...
    2009/08/15 14:11:09 :: Putting interface up...
    2009/08/15 14:11:09 :: Running DHCP
    2009/08/15 14:11:09 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:11:09 ::
    2009/08/15 14:11:09 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 14:11:09 ::
    2009/08/15 14:11:19 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 14:11:19 ::
    2009/08/15 14:11:39 :: dhcpcd: timed out
    2009/08/15 14:11:39 ::
    2009/08/15 14:11:39 :: DHCP connection failed
    2009/08/15 14:11:39 :: exiting connection thread
    2009/08/15 14:11:41 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:11:41 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 14:11:41 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:13:00 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:13:00 :: Removing PID file...
    2009/08/15 14:13:00 :: Shutting down...
    2009/08/15 14:13:50 :: ---------------------------
    2009/08/15 14:13:50 :: wicd initializing...
    2009/08/15 14:13:50 :: ---------------------------
    2009/08/15 14:13:50 :: wicd is version 1.6.2 436
    2009/08/15 14:13:50 :: setting backend to external
    2009/08/15 14:13:50 :: trying to load backend external
    2009/08/15 14:13:50 :: successfully loaded backend external
    2009/08/15 14:13:50 :: trying to load backend external
    2009/08/15 14:13:50 :: successfully loaded backend external
    2009/08/15 14:13:51 :: Automatically detected wireless interface eth1
    2009/08/15 14:13:51 :: setting wireless interface eth1
    2009/08/15 14:13:51 :: automatically detected wired interface eth0
    2009/08/15 14:13:51 :: setting wired interface eth0
    2009/08/15 14:13:51 :: setting wpa driver wext
    2009/08/15 14:13:51 :: setting use global dns to False
    2009/08/15 14:13:51 :: setting global dns
    2009/08/15 14:13:51 :: global dns servers are None None None
    2009/08/15 14:13:51 :: domain is None
    2009/08/15 14:13:51 :: search domain is None
    2009/08/15 14:13:51 :: setting automatically reconnect when connection drops True
    2009/08/15 14:13:51 :: Setting dhcp client to 0
    2009/08/15 14:13:51 :: Wireless configuration file found...
    2009/08/15 14:13:51 :: Wired configuration file found...
    2009/08/15 14:13:51 :: chmoding configuration files 0600...
    2009/08/15 14:13:51 :: chowning configuration files root:root...
    2009/08/15 14:13:51 :: Using wireless interface...eth1
    2009/08/15 14:13:51 :: Using wired interface...eth0
    2009/08/15 14:13:57 :: Autoconnecting...
    2009/08/15 14:13:59 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:14:00 :: trying to automatically connect to...101
    2009/08/15 14:14:00 :: Connecting to wireless network 101
    2009/08/15 14:14:00 :: Putting interface down
    2009/08/15 14:14:00 :: Releasing DHCP leases...
    2009/08/15 14:14:00 :: Setting false IP...
    2009/08/15 14:14:00 :: Stopping wpa_supplicant
    2009/08/15 14:14:00 :: Flushing the routing table...
    2009/08/15 14:14:00 :: Putting interface up...
    2009/08/15 14:14:00 :: Generating psk...
    2009/08/15 14:14:01 :: Attempting to authenticate...
    2009/08/15 14:14:11 :: Running DHCP
    2009/08/15 14:14:11 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:11 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 14:14:11 ::
    2009/08/15 14:14:15 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 :: dhcpcd: forking to background
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 ::
    2009/08/15 14:14:15 :: DHCP connection successful
    2009/08/15 14:14:15 :: Connecting thread exiting.
    2009/08/15 14:14:17 :: Sending connection attempt result Success
    2009/08/15 14:14:17 :: Autoconnecting...
    2009/08/15 14:14:17 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:14:17 :: trying to automatically connect to...102
    2009/08/15 14:14:17 :: Connecting to wireless network 102
    2009/08/15 14:14:17 :: Putting interface down
    2009/08/15 14:14:17 :: Releasing DHCP leases...
    2009/08/15 14:14:18 :: Setting false IP...
    2009/08/15 14:14:18 :: Stopping wpa_supplicant
    2009/08/15 14:14:18 :: Flushing the routing table...
    2009/08/15 14:14:18 :: Putting interface up...
    2009/08/15 14:14:18 :: Generating psk...
    2009/08/15 14:14:18 :: Attempting to authenticate...
    2009/08/15 14:14:19 :: Running DHCP
    2009/08/15 14:14:19 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: rebinding lease of 192.168.0.183
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: acknowledged 192.168.0.183 from 192.168.0.1
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:19 :: dhcpcd: eth1: checking for 192.168.0.183
    2009/08/15 14:14:19 ::
    2009/08/15 14:14:24 :: dhcpcd: eth1: leased 192.168.0.183 for 86400 seconds
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 :: dhcpcd: forking to background
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 ::
    2009/08/15 14:14:24 :: DHCP connection successful
    2009/08/15 14:14:24 :: Connecting thread exiting.
    2009/08/15 14:14:29 :: Sending connection attempt result Success
    2009/08/15 14:15:02 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:15:02 :: Removing PID file...
    2009/08/15 14:15:02 :: Shutting down...
    2009/08/15 14:15:52 :: ---------------------------
    2009/08/15 14:15:52 :: wicd initializing...
    2009/08/15 14:15:52 :: ---------------------------
    2009/08/15 14:15:52 :: wicd is version 1.6.2 436
    2009/08/15 14:15:52 :: setting backend to external
    2009/08/15 14:15:52 :: trying to load backend external
    2009/08/15 14:15:52 :: successfully loaded backend external
    2009/08/15 14:15:52 :: trying to load backend external
    2009/08/15 14:15:52 :: successfully loaded backend external
    2009/08/15 14:15:52 :: Automatically detected wireless interface eth0
    2009/08/15 14:15:52 :: setting wireless interface eth1
    2009/08/15 14:15:52 :: automatically detected wired interface eth1
    2009/08/15 14:15:52 :: setting wired interface eth0
    2009/08/15 14:15:52 :: setting wpa driver wext
    2009/08/15 14:15:52 :: setting use global dns to False
    2009/08/15 14:15:52 :: setting global dns
    2009/08/15 14:15:52 :: global dns servers are None None None
    2009/08/15 14:15:52 :: domain is None
    2009/08/15 14:15:52 :: search domain is None
    2009/08/15 14:15:52 :: setting automatically reconnect when connection drops True
    2009/08/15 14:15:52 :: Setting dhcp client to 0
    2009/08/15 14:15:52 :: Wireless configuration file found...
    2009/08/15 14:15:52 :: Wired configuration file found...
    2009/08/15 14:15:52 :: chmoding configuration files 0600...
    2009/08/15 14:15:52 :: chowning configuration files root:root...
    2009/08/15 14:15:52 :: Using wireless interface...eth1
    2009/08/15 14:15:52 :: Using wired interface...eth0
    2009/08/15 14:15:59 :: Autoconnecting...
    2009/08/15 14:16:02 :: Attempting to autoconnect with wired interface...
    2009/08/15 14:16:02 :: Putting interface down
    2009/08/15 14:16:02 :: Releasing DHCP leases...
    2009/08/15 14:16:02 :: Setting false IP...
    2009/08/15 14:16:02 :: Flushing the routing table...
    2009/08/15 14:16:02 :: Putting interface up...
    2009/08/15 14:16:02 :: Running DHCP
    2009/08/15 14:16:02 :: dhcpcd: version 5.0.6 starting
    2009/08/15 14:16:02 ::
    2009/08/15 14:16:02 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 14:16:02 ::
    2009/08/15 14:16:12 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 14:16:12 ::
    2009/08/15 14:16:32 :: dhcpcd: timed out
    2009/08/15 14:16:32 ::
    2009/08/15 14:16:32 :: DHCP connection failed
    2009/08/15 14:16:32 :: exiting connection thread
    2009/08/15 14:16:34 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 14:16:34 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 14:16:34 :: Sending connection attempt result dhcp_failed
    2009/08/15 14:17:02 :: Daemon going down, killing wicd-monitor...
    2009/08/15 14:17:02 :: Removing PID file...
    2009/08/15 14:17:02 :: Shutting down...
    2009/08/15 15:39:03 :: ---------------------------
    2009/08/15 15:39:03 :: wicd initializing...
    2009/08/15 15:39:03 :: ---------------------------
    2009/08/15 15:39:03 :: wicd is version 1.6.2 436
    2009/08/15 15:39:03 :: setting backend to external
    2009/08/15 15:39:03 :: trying to load backend external
    2009/08/15 15:39:03 :: successfully loaded backend external
    2009/08/15 15:39:03 :: trying to load backend external
    2009/08/15 15:39:03 :: successfully loaded backend external
    2009/08/15 15:39:03 :: Automatically detected wireless interface eth0
    2009/08/15 15:39:03 :: setting wireless interface eth1
    2009/08/15 15:39:03 :: automatically detected wired interface eth1
    2009/08/15 15:39:03 :: setting wired interface eth0
    2009/08/15 15:39:03 :: setting wpa driver wext
    2009/08/15 15:39:03 :: setting use global dns to False
    2009/08/15 15:39:03 :: setting global dns
    2009/08/15 15:39:03 :: global dns servers are None None None
    2009/08/15 15:39:03 :: domain is None
    2009/08/15 15:39:03 :: search domain is None
    2009/08/15 15:39:03 :: setting automatically reconnect when connection drops True
    2009/08/15 15:39:03 :: Setting dhcp client to 0
    2009/08/15 15:39:03 :: Wireless configuration file found...
    2009/08/15 15:39:03 :: Wired configuration file found...
    2009/08/15 15:39:03 :: chmoding configuration files 0600...
    2009/08/15 15:39:03 :: chowning configuration files root:root...
    2009/08/15 15:39:03 :: Using wireless interface...eth1
    2009/08/15 15:39:03 :: Using wired interface...eth0
    2009/08/15 15:39:10 :: Autoconnecting...
    2009/08/15 15:39:13 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:39:13 :: Putting interface down
    2009/08/15 15:39:13 :: Releasing DHCP leases...
    2009/08/15 15:39:13 :: Setting false IP...
    2009/08/15 15:39:13 :: Flushing the routing table...
    2009/08/15 15:39:13 :: Putting interface up...
    2009/08/15 15:39:13 :: Running DHCP
    2009/08/15 15:39:13 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:39:13 ::
    2009/08/15 15:39:13 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:39:13 ::
    2009/08/15 15:39:23 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:39:23 ::
    2009/08/15 15:39:43 :: dhcpcd: timed out
    2009/08/15 15:39:43 ::
    2009/08/15 15:39:43 :: DHCP connection failed
    2009/08/15 15:39:43 :: exiting connection thread
    2009/08/15 15:39:45 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:39:45 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:39:45 :: Sending connection attempt result dhcp_failed
    2009/08/15 15:41:46 :: Daemon going down, killing wicd-monitor...
    2009/08/15 15:41:46 :: Removing PID file...
    2009/08/15 15:41:46 :: Shutting down...
    2009/08/15 15:42:33 :: ---------------------------
    2009/08/15 15:42:33 :: wicd initializing...
    2009/08/15 15:42:33 :: ---------------------------
    2009/08/15 15:42:33 :: wicd is version 1.6.2 436
    2009/08/15 15:42:33 :: setting backend to external
    2009/08/15 15:42:33 :: trying to load backend external
    2009/08/15 15:42:33 :: successfully loaded backend external
    2009/08/15 15:42:33 :: trying to load backend external
    2009/08/15 15:42:33 :: successfully loaded backend external
    2009/08/15 15:42:33 :: Automatically detected wireless interface eth0
    2009/08/15 15:42:33 :: setting wireless interface eth1
    2009/08/15 15:42:33 :: automatically detected wired interface eth1
    2009/08/15 15:42:33 :: setting wired interface eth0
    2009/08/15 15:42:33 :: setting wpa driver wext
    2009/08/15 15:42:33 :: setting use global dns to False
    2009/08/15 15:42:33 :: setting global dns
    2009/08/15 15:42:33 :: global dns servers are None None None
    2009/08/15 15:42:33 :: domain is None
    2009/08/15 15:42:33 :: search domain is None
    2009/08/15 15:42:33 :: setting automatically reconnect when connection drops True
    2009/08/15 15:42:33 :: Setting dhcp client to 0
    2009/08/15 15:42:33 :: Wireless configuration file found...
    2009/08/15 15:42:33 :: Wired configuration file found...
    2009/08/15 15:42:33 :: chmoding configuration files 0600...
    2009/08/15 15:42:33 :: chowning configuration files root:root...
    2009/08/15 15:42:33 :: Using wireless interface...eth1
    2009/08/15 15:42:33 :: Using wired interface...eth0
    2009/08/15 15:42:39 :: Autoconnecting...
    2009/08/15 15:42:42 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:42:42 :: Putting interface down
    2009/08/15 15:42:42 :: Releasing DHCP leases...
    2009/08/15 15:42:42 :: Setting false IP...
    2009/08/15 15:42:42 :: Flushing the routing table...
    2009/08/15 15:42:42 :: Putting interface up...
    2009/08/15 15:42:42 :: Running DHCP
    2009/08/15 15:42:42 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:42:42 ::
    2009/08/15 15:42:42 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:42:42 ::
    2009/08/15 15:42:52 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:42:52 ::
    2009/08/15 15:43:12 :: dhcpcd: timed out
    2009/08/15 15:43:12 ::
    2009/08/15 15:43:12 :: DHCP connection failed
    2009/08/15 15:43:12 :: exiting connection thread
    2009/08/15 15:43:14 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:43:14 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:43:14 :: Sending connection attempt result dhcp_failed
    2009/08/15 15:44:27 :: Daemon going down, killing wicd-monitor...
    2009/08/15 15:44:27 :: Removing PID file...
    2009/08/15 15:44:27 :: Shutting down...
    2009/08/15 15:44:48 :: ---------------------------
    2009/08/15 15:44:48 :: wicd initializing...
    2009/08/15 15:44:48 :: ---------------------------
    2009/08/15 15:44:48 :: wicd is version 1.6.2 436
    2009/08/15 15:44:48 :: setting backend to external
    2009/08/15 15:44:48 :: trying to load backend external
    2009/08/15 15:44:48 :: successfully loaded backend external
    2009/08/15 15:44:48 :: trying to load backend external
    2009/08/15 15:44:48 :: successfully loaded backend external
    2009/08/15 15:44:48 :: Automatically detected wireless interface eth0
    2009/08/15 15:44:48 :: setting wireless interface eth1
    2009/08/15 15:44:48 :: automatically detected wired interface eth1
    2009/08/15 15:44:48 :: setting wired interface eth0
    2009/08/15 15:44:48 :: setting wpa driver wext
    2009/08/15 15:44:48 :: setting use global dns to False
    2009/08/15 15:44:48 :: setting global dns
    2009/08/15 15:44:48 :: global dns servers are None None None
    2009/08/15 15:44:48 :: domain is None
    2009/08/15 15:44:48 :: search domain is None
    2009/08/15 15:44:48 :: setting automatically reconnect when connection drops True
    2009/08/15 15:44:48 :: Setting dhcp client to 0
    2009/08/15 15:44:48 :: Wireless configuration file found...
    2009/08/15 15:44:48 :: Wired configuration file found...
    2009/08/15 15:44:48 :: chmoding configuration files 0600...
    2009/08/15 15:44:48 :: chowning configuration files root:root...
    2009/08/15 15:44:48 :: Using wireless interface...eth1
    2009/08/15 15:44:48 :: Using wired interface...eth0
    2009/08/15 15:44:58 :: trying to load backend ioctl
    2009/08/15 15:44:58 :: WARNING: python-iwscan not found, falling back to using iwlist scan.
    2009/08/15 15:44:58 :: WARNING: python-wpactrl not found, falling back to using wpa_cli.
    2009/08/15 15:44:58 :: trying to load backend external
    2009/08/15 15:45:57 :: Autoconnecting...
    2009/08/15 15:45:57 :: Putting interface down
    2009/08/15 15:45:57 :: Attempting to autoconnect with wired interface...
    2009/08/15 15:45:57 :: Releasing DHCP leases...
    2009/08/15 15:45:57 :: Setting false IP...
    2009/08/15 15:45:57 :: Flushing the routing table...
    2009/08/15 15:45:57 :: Putting interface up...
    2009/08/15 15:45:57 :: Running DHCP
    2009/08/15 15:45:57 :: dhcpcd: version 5.0.6 starting
    2009/08/15 15:45:57 ::
    2009/08/15 15:45:57 :: dhcpcd: eth0: rebinding lease of 192.168.0.193
    2009/08/15 15:45:57 ::
    2009/08/15 15:46:07 :: dhcpcd: eth0: broadcasting for a lease
    2009/08/15 15:46:07 ::
    2009/08/15 15:46:27 :: dhcpcd: timed out
    2009/08/15 15:46:27 ::
    2009/08/15 15:46:27 :: DHCP connection failed
    2009/08/15 15:46:27 :: exiting connection thread
    2009/08/15 15:46:29 :: No wired connection present, attempting to autoconnect to wireless network
    2009/08/15 15:46:29 :: Unable to autoconnect, you'll have to manually connect
    2009/08/15 15:46:29 :: Sending connection attempt result dhcp_failed

    Was able to boot this weekend and did an update which updated the kernel.  Rebooted and there was no network.  Rebooted again and no network... rebooted again and... had network!?  I tried changing wicd to use dhclient only and did the triple reboot test again and it didn't change anything... randomly working network... same with dhcpcd.
    So it appears to be a dhcp timeout issue however it makes no sense because before the update a couple weeks ago it was working every time with no hiccup.  Am I not providing enough information that will aid in anyone helping me figure this out?

  • Can I have wired and wireless simultaneously - and connect via another Mac?

    Here's my problem: My eMac (Feb 2005 running Leopard 10.5.8) is great except that it drops the ethernet cable internet every 15 minutes or so. "Sleep and wake" and I'm back on the internet for another 10-20 minutes, but this is not a long-term solution.
    OK so I say that I will get a D-Link wireless USB adapter for the eMac (it has bluetooth, but not WiFi). Fine, except then the D-Link DIR-635 router that sends the WiFi signal is too far away and too weak. But I have another computer to which I can plug-in the Ethernet CABLE. Can I then connect the eMac via a wireless (airport) sharing? NOTE: At this time the ISP Modem goes to a DIR-635 router (a wired and wireless router) and the cable goes up 2 flights of stairs to the eMac. I'd plan to then plug-in the PBG4-12" to the cable instead of the eMac; and then connect the eMac via wireless sharing if that is possible. (The PBG4 does NOT drop the signal via wired ethernet - it is a problem with the eMac not the cable or router).
    BUT then how to print? My MP640 printer is set-up for wired printing only right now. And for a number of reasons, I really want to keep it on wired (not wireless)-- I use this with another computer etc. etc. and wired gives me more selections for printing...
    Any comments on this possibility and then I'll reply with comments and/or ideas-- THANKS!
    Best regards,
    Steve Schulte
    Thursday 3 February 2011

    If you use two routers then you should have the main one (connected to modem) as the official router. The second one should be configured to extend the existing network (you will need to consult its manual to find out how that's done.) If you try using two routers independently, then they will tend to interfere with each other because both are trying to deliver IP numbers on the network. So if the printer ends up on the secondary router then a machine connected to the main router may not be able to connect to the printer.

  • How to set up WRT54GS so the wired and wireless connections both work?

    I have a DSL line in to a Motorola modem.
    The modem is connected to the WRT54GS with an ethernet cable.
    When I connect my computers directly into the WRT54GS with an ethernet cable (there are four connection spots at the back of the box), I cannot go to the internet.  I have 3 computers plugged in, but none of them connect via Ethernet..
    Is there a setting on the router so that I can use the router for both wired and wireless connectivity?
    Added info: I tried to connect directly from the computer to the modem, but again, got no connectivity.  When I "chatted" with ATT, they told me the modem is set to "bridge", and that I could connect only one device.  I don't want to change this setting because I want to use the router for the wireless capability.  Besides which, I have more than one computer to connect to the internet.
    How come I cannot just plug in and go?  
    My firmware version is v2.07.1. 
    I don't know how to find out what hardware version I have.
    Other info is "DirectEthernet Connection, Speed: 100.0 Mbps, Signal Strength: Excellent, Status: Connected"
    Also "1394 Connection 3, Speed: 400.0 Mbps, Status: Connected"  
    I don't know what that's for, but thought it might prove useful to those of you who are knowledgeable about such things.
    Wireless is ok, but if I'm sitting right next to the router, I'd like to connect with Ethernet and take advantage of the better speed, etc.
    Thanks in advance.

    Just click this link.

  • Problems with hp laser printing in leopard- wired and wireless

    Printing problems in Leopard are slowly eating away at my last nerve!
    Here's the background: I have a Macbook Pro 2.33GHz Core 2 Duo, 4GB ram, running 10.5.2. Ever since I upgraded to Leopard, I've been having printing problems, both wired and wireless. I have an HP Laserjet 1160, which is a wonderfully reliable printer- I've had it since 2005 and have never had a problem.
    When I installed Leopard, I began getting a popup message after starting up my computer and logging in. The message has a lighthouse icon on it and reads:
    "Popup Error: Failed to listen for incoming Popup jobs. You will not be able to use Popup printing for the duration of this session. Please report this incident to a system administrator."
    (for the record, I only have one computer, it's not on any system, and I have the administrator account)
    Here are the two problems I have:
    -First, wired printing is spotty. Half of the time, when I connect the USB cable and click print, nothing prints. Usually, if I unplug the cable and plug it into the other USB port, then printing works. This is in spite of the fact that the computer recognizes that the printer is there- I can delete then re-add the printer to my printer list and still nothing.
    -Second, wireless printing does not work at all. Again, the printer is recognized when plugged in to either the time capsule or the airport express, and I can add the printer, but printing doesn't work: the job is sent to the print queue, but the queue stalls on the "connecting to printer" phase.
    This problem is a huge pain, and I have no idea how to solve it. Any help is appreciated.
    Jon

    Thanks for posting this problem Cathjock. I have had the same issue with a NEC Superscript 1400. Thinking it wast he printer, which is getting up there in age, I went out and purchased a new HP P1505 to no avail. I have been researching this for a few days now and think that all of this is related to a user permission in CUPS. I have de-installed, re-installed, re-booted etc as prescribed and got three pages hours after the fact via my Airport Express connected new printer. Generally, however, nothing comes out immediately as was the case in the past either on Airport Express or via USB cable. I am stumped and am starting to get worried.
    I can't print invoices for my business and am considering firing up my old Windows machine if you can believe it !
    Seriously, Apple has created a monstrous situation with all of htese printing issues and nothing is apparently being done, nothing that I can find in any of the discussion forums at this time.
    My last option is to re-install 10.5 with an archive and install as I really cannot afford to start from scratch.
    Now if you look at this forum, there are 242,847 views logged with 2,514 questions and 13,848 messages.
    This should mean something for Apple as many people need help and are getting really really ******-off.
    So pleeeeaaaaase Apple. respond and offer a fix for this problem that is plaguing a ton of people.
    Chris

  • Wired and Wireless Connections to OfficeJet 8620?

    We have a small wired Ethernet network.  We are planning to install an HP OfficeJet 8620 multi-function printer tomorrow.  I understand that for a wired-only Ethernet network, I would just connect the OfficeJet to our router, then install the drivers on each workstation.
    Unfortunately, our situation is more complicated than that.  Several people want to use wireless devices to print to the OfficeJet 8620.  We have a working wireless network in place, and the wireless devices are able to access it without problem..
    All devices on the network (wired and wireless) use the same router, which has both wired Ethernet ports and wireless capability.  So, everything is on the same network, going through the same router.
    From reading the 8620 documentation, it looks like you can only have a wired OR a wireless connection, but not both.  Apparently connecting a CAT-5 cable to the Ethernet port on the printer disables the wireless capability of the printer.
    If that is correct, what can we do to enable both wired computers and wireless mobile devices to print to the 8620, given the network structure I have described above?
    Thanks very much for any assistance you can offer.
    This question was solved.
    View Solution.

    Hi,
    You can setup as shown on page #7 of tyhe following guide:
          http://www.hp.com/ctg/Manual/c00389927.pdf 
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Help with HP Laser CM1415fnw wired and wireless setup

    Hello all,
    I am have have trouble with both wired and wireless. It will only let me do one or the other. Is there a way i can do both?
    everything works if i am wired or wireless but, the user wants to be able to use both.
    Any help would be great.
    This question was solved.
    View Solution.

    Sorry, both cannot be enabled by design.  That said, devices on a network do not care how others are connected.  You can print from a wireless connection to a wired (Ethernet) printer and v/v.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • A very strange wired and wireless network issue

    Hello,
    I have never had any issue at all with my macbook (2008) until this week, I use it both for work and personal use.
    Most of time, I'm used to be on customer site, so I use wired and wireless connections depending of the situation....
    I have never had any issue at all with wifi neither ethernet connections during three years, until this week... and I can say this is the most strange thing I have ever seen....
    Using wired or wireless connection, always the speed of network was really good, at home, many customers, etc never had any problem...
    But this week I'm currently out of home, and the hotel where I'm staying I'm having very poor network rate....
    Using wireless connection, the download speed is no more than 10kb.... and using ethernet I get less speed... but during the day I'm on customer site, using the ethernet connection and download speed is really good, more than 500k-800k....
    I have already tried in the hotel few wifi connections (there are three) and differents wired connections (in diferent rooms) and the download speed is always the same, no more than 10kb...
    During this afternoon, I could go into hotel's lab and could connect directly to the router using cable, same speed no more than 10kb....
    The most strange thing is on their computers the download speed using wired connection is around 6Mb....
    how is possible I'm getting no more than 10kb of download speed when the pc's at hotel using same wired connection gets 6Mb?
    I have already deleted current network connections, execute onyx to clear everything, perform dhcp connection, tried manual ip etc, and always the results are the same...
    I know there is no problem with the macbook, because it works pretty good at every location I've been... but until this week...
    Sincerely I'm getting a little crazy here, I'll appreciate any help!!!
    thanks in advance

    I've seen something like this on my T400 when it was running Vista.  Now that I use Win 7 it's been OK. I rather doubt that your issue is the same but I'm tossing it out here just on the off chance.
    Im my case, I had to downgrade my Intel 5300 card to a 5100 (as suggested by a Lenovo 2nd-tier tech) to get things working.
    My symptoms were a little different.  Wifi was fine until I went back to a wired network.  After that, trying to use the same wifi AP as before would end up associated, but no internet access.  DHCP wasn't working.  The GUI "find" app didn't work as expected either.  Some APs showed up, and some didn't.
    If I configured for automatic connection to my home AP it would try and fail.  Just rebooting at that point would again attempt an automatic connection that would succeed.
    What I have noticed now that I run Win 7 is that Access Connections is completely useless.  Often the "finder" doesn't show an AP 3 feet away.  I didn't notice that this happened after a switch from wired, but maybe.
    Are you using Access Connections?  If so, you might try uninstalling it.
    Sorry I can't be of real help,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • 802.1x Authentication on Wired and Wireless LAN

    I have successfully configured 802.1x authentication on wired and wireless Lan. We have Cisco Switches, ACS SE and Windows AD.
    But i have one issue regarding the Single Sign on while authentication using the 802.1x with Windows Active directory the users that are login first time not able to logon but the users that have their profiles already existed in their PC then there is no issue and they successfully authenticated and login easily.
    Is there any way of login successfully for the users first time using 802.1x authentication with Windows AD like a Single Sign On?

    We ran into the same situation from time to time. We implemented 802.1x authentication using the Cisco Secure Services Client (SSC) on the windows hosts.
    At the beginning we were completly unable to logon on the maschines where no locally stored windows profile exists. After change to timeout to authenticate at the network in the SSC options we are able to logon to the network and also be authenticated by the domain controller.
    Sadly this works out often as a timing issue. Most times the user needs to try a couple of times. At the moment, I'm also very interessted in a good way to avoid this (as it seems to be) racecondition.
    Hope that someone else has any clue?

  • NAC Guest server for wired and wireless

    Hi
    My customer wants the NGS to install for both wired and wireless users. For wireless users we can integrate it with the WLC but i don't know how it will work for wired users at the same time. Pls suggest.
    Thanks

    Hi Vishal,
    Please note that if you want to return ACLs (and usually in wired web auth you need to), you will have to integrate with ACS as NGS itself cannot return ACLs in the reply radius attributes.
    Basically the process is as follows:
    1 - Client plugs cable on switch.
    2 - Web auth is triggered on the port.
    3 - default ACL permiting only DNS and DHCP is applyed so that the client PC can obtain IP address and open a browser.
    4 - Client will be redirected to the NGS hotspot login page.
    5 - Client will enter credentials.
    6 - Client broswer will send an HTTP POST packet containing the credentials.
    7 - The switch will intercept the POS packets and retrieve the credentials entered.
    8 - The switch will send Radius Access-Request to the ACS.
    9 - The ACS will use the NGS as External Identity source to authenticate the client.
    10 - The NGS will reply with Radius Access-Accept to the ACS and the ACS will reply to the switch including the ACL in the Access-Accept.
    11 - the Switch authorizes the client on the port and applies the ACL it received from the ACS.
    Please follow the document Nicolas posted as it is a good one.
    HTH,
    Thanks

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

Maybe you are looking for

  • Over 6gb of 'Other' when trying to sync my iPhone 4s

    Hi, New to forums and technology !. I've had itunes for about 10 years or so on various devices. Am currently owner of iphone 4s 16gb and ipad mini 64gb wi-fi - pleased with both but have problem when syncing. The phone is only 16gb so I can't upload

  • Are Workbook settings stored in any table

    Hi Gurus, Are the workbook settings stored in any of the tables? There is a requirement for me to collect the information on whether the Refresh automatic has been checked or not for the workbooks. It would be great, If any of you can provide me with

  • Where is a sites web address found, it mut be entered in the exceptions window under pop-up.

    Tools-Options- pop-up- exceptions. Panel asks for web address. Where is it? Recent Firefox up grade removed the line from the top of the page.

  • Want to remove Duplicate data...

    Hi, I have three diff queries which product a similar output. 1) SQL Statement return Product Amount1 A 100 B 100 C 100 2) SQL Statement return Product Amount2 D 200 B 200 E 200 3) SQL Statement return Product Amount3 A 300 F 300 D 300 Now i want out

  • Full video not playing

    Hi, apologies if this has already been asked and answered. Every video that I import and then drop onto the timeline will always end before the total duration of the video is complete. Regardless of duration, the video will stop 1/100th of a second b