Using AirDisk for backups

Does anyone know if there is a way to rsync or otherwise do a fast copy (perhaps through scripts) directly to the AirDisk. Ideally I'm thinking would/does AirPort Extreme n support rsync directly or offer an rsync url so that the source Mac doesn't have to do the extra lifting by being forced to do a local rsync when in fact the destination drive is remote (AirPort Extreme n).
Example rsynd I do is,
sudo rsync -WavE /Volumes/localsourcevol/ /Volumes/AirDisk_vol/
but it is incredibly slow and tends to slow down over time. For example, an rsync operation that would take perhaps 30min between a PM G4 (wired) and an iBook G4 (wireless), has taken over 16hrs (without signs of being anywhere near complete so I usually kill the rsync) from the PM G4 to the mounted AirDisk on the extreme that would otherwise be routing the traffic to the iBook.
Something else I've found painfully slow and typically ends up failing as a result of timeout is Backup 3.1 (courtesy of .Mac) to backup my homedir to the attached AirDisk. Generally it seems the drive falls asleep and the AirPort is unable to wake when activity demands it.
I'm using a WD My Book Pro Edition II 1TB (the triple interface model) drive attached to the AirPort Extreme N in RAID1 mode (mirrored so I have ~500GB capacity).

I would love to hear if you ever get this to work. My experience with AEBS has been quite poor.
The most obvious problem is that AEBS does not support owner and permissions. This quite excludes backuping a bootable volume to it.
laavu:/Volumes/User User$ mkdir aFolderOnAAEBS
laavu:/Volumes/User User$ sudo chown root aFolderOnAAEBS/
chown: aFolderOnAAEBS/: Operation not supported
laavu:/Volumes/User User$ ls -ld aFolderOnAAEBS/
drwxrwxrwx 2 User User 264 Jul 19 00:39 aFolderOnAAEBS/
-Pete
iBook G4   Mac OS X (10.4.8)  

Similar Messages

  • I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

    I am unable to create a new folder on either of my auxillary disk drives.  I can access the files and folders that were there when I transferred one of the drives from a PC.  Time machine uses one for backup and I want to use the other to store photos which are large files.  An help would be appreciated.

    Thanks for the reply.  If I reformat the drive will I be able to access the files on it from the MAC.  I do not share the drive with a PC.  The files were originally created on a PC which I no longer use.  I do want to continue to access the files put there by the PC.  I would like to not have to copy them over to the MAC hard drive just to use them.  The second aux drive is new and works fine because it was formatted by the MAC.  I can drag and drop files there and work with just as if they were on the internal drive.

  • Can I use iCloud for backup?

    Can I use iCloud for backup?

    To back up all your data you are better off getting an external hard drive.  For details on iCould, read: http://www.apple.com/icloud/.

  • I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

    I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

    No, it is not a backup method at all.  If you delete a sync'd file on any device, you delete it permanently from iCloud.  That by its very essence is not a backup solution therefore.  A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
    iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

  • Using Airdisk for Time Machine backup

    I've been using Time Machine to make backups to an external drive for sometime now and would like to change to using my Airport Extreme to make wireless backups. When connecting the hard drive to the airport I am able to detect and mount the hard drive and time machine can select the drive for backups, unfortunately time machine doesn't realize that I already have backups made on that drive and instead tries to make a new full backup. Does any one know of way to tell Time Machine to use the preexisting backups? Thanks.

    First of all, Apple doesn't support using Time Machine to back up to external drives connected to an AirPort Extreme Base Station. See:
    http://support.apple.com/kb/HT2038
    But that doesn't mean that it won't work—a least for awhile—but it will need to start a new full backup.

  • Do I need to keep the Capsule plugged in to my cable modem in order to use it for backup?

    The location of my cable modem is really inconvenient. I'd like to move the Capsule to a different room. Do I need to keep it connected to the cable modem in order to be able to use it as my Time Machine backup device?

    I assume your cable modem is a router.. as such the TC should be wired to it in bridge. It will not do anything worse than now for the network in the house.. and the TC can then be accessed as per normal.
    TC is designed to be plugged into the modem or main router by ethernet.
    You can move it anywhere you like in the house as long as you have ethernet connection back to the modem.
    You can run the TC by wireless .. it will have the following effects.
    1. Super slow backups. It will simply reduce the current wireless speed by half or more for backups.
    2. Since there is no QoS your internet will stop during backups. Or near to.
    3. You will affect all wireless clients during the backups.
    It can work, if your backups are very small.. but the TC becomes a near to useless dumb client in the network.. ethernet ports are off, wireless becomes mere client.. so you cannot even connect directly to it.
    If you try the TC in stand alone.. ie a secondary network.. that can work.
    1. The computer will then have backups or internet not both. You will need to deliberately connect to the TC to get backups working. That is assuming you use wireless.
    2. You can do it with ethernet. and have internet by wireless. but the setup is tricky.. tell us if you want to proceed this way.
    3. The problem is, the TC now becomes useless to the whole network and is only used by one computer. You may as well have bought a cheap USB drive, which is more reliable and faster.

  • Can windows Vista use TC for backup

    I have two macs using TC and I also have a windows Vista laptop I would also like to get on time machine for backup. I can get on the drive to store files and get files but I can't get it to show up as a valid drive on the network for my backup software on Vista. Any help would be awsome.

    Follow the advice found here for "mounting by mapping a network drive". Then just point your backup software to the drive letter you mapped the Time Capsule to.

  • Use external for backup and personal storage

    Hey all,
    I was wondering if I could use my external for time machine backups and personal storage. I have a seagate 250 and time machine is currently working great. The only thing is that my apple hd is filling up. Even if I lose all my current backups, is there a way to set maybe 50 gigs a side for movies and use the rest for backup?

    Partitioning the drive as joshz suggests is the best route at the moment. Unfortunately Apple does not provide any way to limit the overall size of the database directory. You could also create a blank disk image on the backup drive in which to store other information, but this is almost the same as creating a separate partition. Remember that the two partitions will display as two individual volumes, so it will appear like you have three disks attached (your main one, your backup one, and your storage one).

  • I have mobile me and I use iDisk for backups.

    If I enroll in iCloud will I still be able to back up everything to my iDisk or is it disabled?

    iDISK will work till june 2012. I do use iCLOUD and still using iDISK for documents... As ICLOUD doesn't synchronize documents on the MAC, only on iPHONE, iPADs

  • I'm going to get the new iPhone 5S soon. I also have an iPad. I'm wondering is it best for each device to have the same Apple ID or should each device have a different ID? Pros? Cons? It seems like there is a conflict using iCloud for backup between the 2

    Basically wondering if multiple devices should share the same ID or each to get their own. Such as, how it affects Facetime, backups to iCloud, etc. Thanks. Sorry for the long title.

    Hi matrixxzero,
    In my opinion, you want to use the same Apple/iCloud/iTunes ID on both devices. That is exactly what iCloud is designed for - to keep devices with the same Apple ID in sync. Your Mail, Contacts, Calendars, Reminders, Safari Bookmarks, Notes, Photo Stream photos, and Documents will all be kept in sync if you have those options set up on both devices under Settings>iCloud.
    Unless you have some reason to not want to have the same information on both devices, then going with a single ID on both is the way to go.
    Cheers,
    GB

  • Can Time Capsule be used just for backups -- without being connected to a wireless network?

    I have a second-generation Time Capsule that I no longer need as a wireless router. However, I'd like it to wirelessly (and automatically) backup our family's iMac and MacBook Pro. Is that possible? 

    Thanks very much, Bob and LaPastenague,
    I ended up replacing the wireless Netgear Router (which Time Warner installed last May) with my older (second-generation) Time Capsule -- and it works flawlessly.
    I guess I was afraid that since it's a few years old that it wouldn't work -- or work as well, as the new Netgear wireless router.
    In fact it works better - the range is much better. And the issue my new iMac had, of losing connection with the network (though the little wifi icon never indicated it had in fact dropped) has evaporated.
    Thanks for the help! Just shows that Apple rocks in every way.

  • I can use my time capsule for wifi, but can't connect for backup

    I have been using my TC for a couple of years now, always as a router and backup disk.  I went on a long trip then came back and tried to connect to it, I can use the wifi, but I can't connect to the disk to see it or use it for backups.  I also have a PC connected to the TC and I can see the contents on there through explorer.
    Any ideas would be appreciated...

    how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
    What wireless devices are we looking at here?
    Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
    Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon
    Look for Wireless Clients and click on the numerical IP address that is displayed
    Another box will open
    Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
    Write that down and note that it is your Mac.
    Now, connect another wireless device and repeat the sequence.  Click on the "other" listing that you see to find out more info about that device.  Write down the ID or Address and note what device it is. Then power it off.
    Do the same for each wireless device that you want to have limited access.
    Post back when you have all the info.

  • Using a partitionned cache with off-heap storage for backup data

    Hi,
    Is it possible to define a partitionned cache (with data into the heap) with off-heap storage for backup data ?
    I think it could be worthwhile to do so, as backup data are associated with a different access pattern.
    If so, what are the impacts of such off-heap storage for backup data ?
    Particularly, what are the impacts on performance ?
    Thanks.
    Regards,
    Dominique

    Hi,
    It seems what using scheme for backup-store is broken in latest version of Coherence, I've got an exception using your setup.
    2010-07-24 12:21:16.562/7.969 Oracle Coherence GE 3.6.0.0 <Error> (thread=DistributedCache, member=1): java.lang.NullPointerException
         at com.tangosol.net.DefaultConfigurableCacheFactory.findSchemeMapping(DefaultConfigurableCacheFactory.java:466)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage$BackingManager.isPartitioned(PartitionedCache.java:10)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.instantiateBackupMap(PartitionedCache.java:24)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$Storage.setCacheName(PartitionedCache.java:29)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ServiceConfig$ConfigListener.entryInserted(PartitionedCache.java:17)
         at com.tangosol.util.MapEvent.dispatch(MapEvent.java:266)
         at com.tangosol.util.MapEvent.dispatch(MapEvent.java:226)
         at com.tangosol.util.MapListenerSupport.fireEvent(MapListenerSupport.java:556)
         at com.tangosol.util.ObservableHashMap.dispatchEvent(ObservableHashMap.java:229)
         at com.tangosol.util.ObservableHashMap$Entry.onAdd(ObservableHashMap.java:270)
         at com.tangosol.util.SafeHashMap.put(SafeHashMap.java:244)
         at com.tangosol.coherence.component.util.ServiceConfig$Map.put(ServiceConfig.java:43)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$StorageIdRequest.onReceived(PartitionedCache.java:45)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.java:11)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.java:33)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onNotify(PartitionedService.java:3)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onNotify(PartitionedCache.java:3)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.java:42)
         at java.lang.Thread.run(Thread.java:619)Tracing in debuger has shown what problem is in PartitionedCache$Storage#setCacheName(String) method, it calls instantiateBackingMap(String) before setting __m_CacheName field.
    It is broken in 3.6.0b17229
    PS using asynchronous wrapper around disk based backup storage should reduce performance impact

  • Why should we use BRTOOLS for  oracle data backup?

    Hi there,
    Any one of you have any idea on specific advantages with using BRTOOLS for backup over using only Oracle RMAN?
    Are there any advantages using brbackup in databackups which we do not get with RMAN alone?
    thanks
    Arlin

    i seriously doubt you want to use wsdl4j unless you are doing really advanced webservice work. assuming you are developing this webservice from scratch, you basically want to use JAXWS: define an appropriate interface and your value classes, and let JAXWS do the rest. metro is the JAXWS implementation included in the oracle jdk and it has great tutorials and reference documentation online. i'd suggest you start here: http://metro.java.net/getting-started/

  • Icloud control panel disables photostream when itunes used for backup?

    So thanks to this issue (https://discussions.apple.com/thread/4782118), I decided simply to use iTunes to manually backup once a day until my 90 days has "reset" (see that thread to see what I'm referring to).
    However, it would appear that the iCloud control panel will no longer sync up with my photostream - is this just a coincidence or is that the norm once you choose to use iTunes for backup within iTunes, instead of iCloud?  Photostream is now greyed out in the control panel...

    In order to get mine working in the same situation, I had to delete both the iCloud data file and the [email protected] e-mail account. Once that was accomplished, I was able to get the iCloud installer to close Outlook and install itself correctly. Trying to recreate the accounts again from within Outlook was not the solution and resulted in this error.

Maybe you are looking for

  • Install base Open Interface

    Hello All, When I was trying to migrate a record into Install base using the interface tables with a party as owner for one instance, I am getting an error message saying "Invalid OWNER Party Account for Party ID <XXXX>". I have entered the party_id

  • Invalid method declaration

    Hi there, I have a problem to compile below sentences. import java.awt.* ; import javax.swing.* ; import java.awt.event.* ; public class p662 extends JFrame public ShowColors() ** invalid method declariration for ShowColors **** super ("Using colors"

  • Executing Pro*C/C++ generate code in Oracle 10g Express

    Hi, I had developed my application using Pro*C/C++ in Oracle 10g Enterprise Edition Release 2 to generate the code to execute my SQL statements from the application program. Problem 1: Now, as I am trying to migrate my database to the Oracle 10g Expr

  • How to solve Invocation error: ALC-DSC-003-000.

    Hi, I upgraded the "Reader Extensions 7.2" Using "ReaderExtensions ES" for watch folder concept. It worked well for so many days but now it throws the below mentioned errorlog. How could i rectify the following error. Please advice. Failure Time----F

  • HT1711 I CAN NOT GET THE SONGS TO DEMO?

    just hooked up speakers to computer and set up new account for itunes and cant get the songs to demo. checked my speakers on another web site they work fine. thanks