Using Airport Express as a remote WDS station to connect two wired LANs

I have an Airport Extreme base station connected to a cable modem that gives internet access to both wired and wireless clients. I would like to wirelessly connect this base station to an airport express in a nearby building that also has a wired network so that both wired networks look like one big network. I figured that I would have to use WDS (using the Extreme as the main and the Express as the remote). I've followed all of the directions, but I'm not sure what the setting for Connection Sharing should be on the Express. Technically I am sharing the connection, but isn't the Extreme going to be doing all of the DHCP/NAT/etc.? So my question is, for this configuration what setting should I be using for Connection Sharing on the Extreme: Share a public IP address or Off (Bridge Mode)?

So my question is, for this configuration what setting should I be using for Connection Sharing on the Extreme: Share a public IP address or Off (Bridge Mode)?
"Off (Bridge Mode)" With this setting the AirPort Express Base Station (AX) will pass-thru the NAT & DHCP services of the AirPort Extreme Base Station (AEBS). That way all clients connected to either network will be on the same subnet.

Similar Messages

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Using Airport Express to create a WDS with XP

I have a Dell laptop running XP Pro (SP 2) connected wirelessly to my Airport Extreme Base Station using a Netgear WGT511 wireless card. I am trying to create a WDS using 1 (or 2 if necessary) Airport Express stations to extend the wireless signal throughout the house. I am unable to get the Airport Express to connect to the Airport Extreme Base Station - the light on the Airport Express only blinks orange. I have tried the Setup assistant to no avail so far. The laptop does connect to the Airport Express, but I cannot connect to the internet as I can when directly connected to the Base Station.
Any suggestions are appreciated. Thanks.

Hi,
I tried this last night and could not get it to work. I did manage to get the light on the Airport Express to go solid green, but I could not get the laptop (or the Imac) to recognize the Express - it would only connect to the Extreme base station. Re-scanning did not help.
I should add that I have no security enabled; however I do have a firewall (McAffee) on the laptop.

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

I used Airport Base station and I was able to extend my network using airport express and connect my printers. Now I am using Extreme and I can't extend the network (Express) or the printers nothing shows up. I am using utility 6.3 and Mt Lion What is

I had an Aiport Base Station and extended using Airport Express, where I also connected my printers (network). Now using Airport Extreme off Mt Lion 10.8.4 and Utility 6.3.
I can't extend the network (express) or connect my printers (USB) nor will it find my one wifi printer.
What's up?

For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress.

HT1178 Can I just use my airport express as the primary base station and the time capsule as the network client?

I bought a new airport time capsule 3tb to be used to save to file all my pictures. Can I use it as network client and the airport express as the
Primary base station?

To my opinion this looks a bit like what I'm looking for.
At the moment I have an Imac that is wireless connected to a 2TB time capsule (TC1).
To this time capsule I have another 2TB time capsule (TC2) connected via a upt wire connection.
At the moment there is a backup made via time machine from the Imac to the time capsule TC1 (the second TC is not used)
I'm not so technical so I hope you understand the configuration.
What do I want to achieve :
copy all my data from the Imac to TC1 so that the information can be accessed by more users.
create an automatic backup from TC1 to TC2 (mirror or raid system) for security.
give access to some users on the network to access TC1 to read and write data.
TC2 only serves as backup from TC1 and no direct access is needed to this disk.
If there is a solution, thanks for explaining it in 'IT kindergarden style' so that I can understand and use the info.
Many thanks in advance.

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Currently use Airport Express -1st Generation-to access internet -purchased 2014 Airport Extreme base station -can I import Express back up configuration to keep current settings . Or is it best to do new Airport Extreme as a new Network .

Just spoke with Cisco about the router. They said the router is compatible with the E1500. They suggested that I contact Apple to see if their default IP address was that same as the router (192.168.1.1). They told me I would have to change it if that was the case. How would I do that?

Wireless to ethernet connection using airport express

Here is what I have and what I wish to do. I have a Mac Mini intel duo with Airport extreme card Connected to road runner via a ethernet router. My wife has a window running XP with out airport extreme. Can I use airport express to share the internet with my wife's computer by using an ethernet cable from my wife's computer to the airport express, remotely to (another room). Utilizing my computer as a base station?

Fordmanduo, Welcome to the discussion area!
No that will not work.
The Ethernet port on the AirPort Express (AX) is active ONLY when the AX uses WDS to wirelessly connect to a network.
OS X's Internet Sharing (via Mac mini) is not compatible with WDS.

How do I expand my Airport coverage using Airport express?

I want to expand the reach of my wifi network (i'm using Airport extreme). Can I do that using Airport Express? If yes how?

HI ldelage,
From AirPort Express frequently asked questions (FAQ):
Question: Can AirPort Express be used for a Wireless Distribution System (WDS)?
Answer: Yes. AirPort Express can be a WDS main, remote, or relay station. It can function as a WDS main whether or not you are using it as a router to share your Internet connection (NAT).
Wi-Fi base stations: Setting up and configuring a Wireless Distribution System (802.11b/g). Explains how to use the Airport Express to expand the Range of your wireless network.
The information your looking for is under "Instructions for using AirPort Utility 5.5.2 or later."
In this section, "Configuring a WDS main base station," explains how to configure your Airport Extreme so that it allows the Airport Express to extend your wireless network's range.
"Configuring a WDS relay base station," explains how to configure the Airport Express to be a relay for your Airport Extreme Base Station.
Both steps must be performed so that the express can extend the range of your wireless network.
-TT

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

Using Airport Express to extend an existing wired/wireless Dlink network

Our network uses a Dlink router which must be located in the basement. Our home office Apple computers are wired, and the wireless Apple laptop is almost always used in the living room, directly above the Dlink, so no signal strength problems there. However, the wireless signal does not reach as far as the home office. It's only 20-25 feet away on the main floor, but for some reason, probably structural, the wireless signal doesn't penetrate.
Now I need to extend wireless access capability to the home office, so that I can use the iPod Touch in the office. I've read through a number of posts, and haven't found one that exactly matches this issue.
The information about joining an existing network has this sentence in it:
"Or you can use AirPort Express or AirPort Extreme to extend the range of an existing AirPort Extreme or AirPort Express network by creating a Wireless Distribution System (WDS)."
The existing network I have isn't an AX network. And it's both wired and wireless. And one of the detailed posts explained why a WDS was not the best way to go. Plus I'm confused by references to "base stations" which seem to refer to something that looks like a Time Capsule, not to an AX.
If AX will do what I want it to, I'm envisioning plugging it (all by its lonesome) in to a wall outlet in the hallway outside the home office. That's based both on what I want and what the salesperson said AX could do when I explained what was wanted.
The Dlink network has been working beautifully for months, and I don't want to do anything to screw it up! That includes even opening up the AX utility software until I know exactly what to do.
Can I do the setup (once it's explained!) on the wired computer? If I have to connect the AX to the network as part of the setup, can I use the 5-port switch that extends the wired connection the extra two feet to the computer (and also provides the wired network connection for the main printer)? Or should I take the laptop downstairs and connect the AX directly to the Dlink router?
Thanks,
Marg

+If I connected the AX by cable to my 5-port switch (which in turn is connected directly to the Dlink), would that constitute "an ethernet connection to the D-Link"? If so, then it should be possible to use it as described in your 6th paragraph, to "expand ... (our) main wireless network" -- is that right?+
Yes, this will work great.
+I'd never heard of ethernet powerline adapters, which sound very cool but are not wireless per se - you need a cable to connect the computer with at the far end, and it's wireless capability that I'm trying to create in the home office.+
Rather than hooking a computer up at one end, you could hook up the AirPort Express at one one and setup wireless that way. You won't need the adapters in this case since you have access to the switch. You may have need sometime in the future to get an ethernet signal to another part of the house, so keep this option in mind.
Here is how to setup the AirPort Express. You will use AirPort Utility, which should already be on your Mac Pro. Its located Hard Drive > Applications > Utilities.
Temporarily, connect the AirPort Express (AX) directly to your computer with a short ethernet cable to set it up. When you have the configuration done, you can disconnect the cable and move the AX to the location where it's needed.
Open AirPort Utility and click Manual Setup
Click the Base Station tab below the row of icons to enter a name and device password for the device and choose your time zone, etc.
Then click the AirPort icon in the row of icons at the top of the setup page.
Click the Wireless tab below the icons
Wireless Mode....Create a wireless netork
Wireless Network Name....Exact same name as your D-Link wireless network name
Radio Mode....802.11n (802.11b/g compatible)
Channel...Automatic (see note* at bottom)
Wireless Security...exact same setting as D-Link network
Wireless Password....exact same setting as D-Link network
Click the Internet icon in the row of icons
At the bottom of the page, make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)". This setting allows the AX to work in tandem with the D-Link.
Update to save settings.
*Automatic will usually work well for this. Ideally, you want the D-Link and AX to be on channels that are least 5 channels apart. Automatic will usually choose an open channel, but you may need to manually set the channels on both routers for this step.
Your setup should work fine. Please post back on your progress or questions.

Best Practices for Using Airport Express to Stream iTunes via Ethernet

So I've been reading various posts about using Airport Express to stream iTunes and I've been reading various posts about using the Ethernet port on the Express. However, not sure I've yet found an inclusive listing of settings for both. Wondering if anyone out there has such a thing?
I have an (older) Aiport Express (802.11g, no 'n') running the latest Firmware (6.3, I believe). I have it lashed into my switch via a Cat 6 cable and the 3.5 stereo mini running out to RCA jacks into my RussSound (home audio system) amp. I'd like to make the Express ONLY a iTunes streaming device getting its network link over Ethernet (AirTunes). So, what does everyone suggest for best settings for turning on the Ethernet, turning off the WiFi and running AirTunes?
Thanks much in advance!
cheers
cp root

Airport > Wireless > Wireless mode "off"
Internet > Internet connection > Connect using "Ethernet", Configure IPv4 "via DHCP"
Music > Enable Airtunes
Enable Airtunes over Ethernet (if this choice appears).
When I first did this, the remote speakers didn't appear in iTunes. I poked around to see what I missed and couldn't find anything wrong, but the next time I ran iTunes the remote speakers appeared.
If you run into a firewall problem, make sure your OS X firewall is configured to "set access for specific services and applications": http://docs.info.apple.com/article.html?path=Mac/10.5/en/18503.html
Firmware 6.3 is correct for your Express.

Using Airport Express without a modem

Can you set up a wireless network using Airport Express without a modem? I want set up a wireless network at work. Can I just plug in the ethernet cable on my desk to Airport Express for it to work? Thanks.

Hello Low77. Welcome to the Apple Discussions!
Can you set up a wireless network using Airport Express without a modem?
Yes. By default, the AirPort Express Base Station (AX) will create a stand-alone wireless network which you can connect up to 10 wireless clients for file or printer sharing.
Can I just plug in the ethernet cable on my desk to Airport Express for it to work?
You do not need to plug it into an Ethernet cable for it to work. However, if you require network or Internet access, the Ethernet cable needs to be connected to a network or have Internet access.

I use Airport Express to network 3 iMacs to a DSL modem. Recently, the network became undiscoverable to one of the iMacs. Suggestions for a fix?

I use Airport Express to network 3 iMacs to a DSL modem. The network has become undiscoverable to one of the computers. I have reset the base station to factory settings but this does not help. The other two computers are unaffected. All 3 computers can access the internet when connected directly to the modem. I suspect the problem might be the Airport card? Suggestions?
beaucleo

Thx for the suggestion, although I didn't have to reset the SMC to fix the problem. The problem was the handshake between the security password and the designated network. The following links gave me info for investigationg the problem.
http://support.apple.com/kb/HT4199
http://www.ehow.com/how_6831952_test-airport-card.html
http://www.youtube.com/watch?v=aXiZn64aZfg
http://www.cnet.com/news/how-to-invoke-and-interpret-the-apple-hardware-tests/
I would recommend these web sites to anyone who is having problems setting up and/or maintaining a wifi system.
I discovered after reading one of the web references that if I disabled nework security the problem went away. This, however, was unacceptable. Further experimentation showed that the solution to my problem was to change the name of my network while keeping the same password. I tried only changing my password but that didn't help. I still don't understand why only 1 of the 3 networked iMacs was affected.
Again, thx for your interest and reply.
beaucleo

Can I use AirPort Express as booster/extender to LinkSys router signal?

I have LinkSys N router (which I got free, else would've bought AirPort), its signal isn't strong enough in office room. Can I use AirPort Express as a booster/extender? Some sources say Express can only talk to another Express, others say it can communicate with the LinkSys. Which is it? I don't want to spend the money for two Expresses unless I have no choice (very limited budget nowadays).
I've been hassling with this for over a month, and I'm extremely frustrated.
Thanks to anybody who can help me with this.

Most likely no. That is because most non-Apple router's implementation of WDS is not compatible ... and this is true the other way around. It is true that some early Linksys models, mainly the WRT-54 series were compatible, but I have not seen anything since then that is.

Using Airport Express as a remote WDS station to connect two wired LANs

Similar Messages

Maybe you are looking for