Using Airport Express solely for airtunes question

I am letting my neighbor try out my airport express for airtunes but I ran into a problem setting it up. Her Mac mini Intel 1.5GHz connects to the internet through ethernet from a DSL modem. I want to put the airport express in her family room connected to a stereo. I first tested it by setting up wireless internet and airtunes (ethernet and audio cables plugged into the airport) and I was able to stream music. Then when I plugged the ethernet cable back into the mini I was no longer able to stream music. iTunes would attempt to connect for about a minute but would fail. I was also confused about what settings to use in Airport Admin Utility. I tried "wireless disabled" but then I couldn't even see it in Airport Admin Utility and I had to reset it (what is the point of that setting?!). What do I do?

Wait a second. They can't do it at the same time?
You can stream music and get on the Internet at the same time if (a) the AX is connected directly to the Internet or (b) the AX joins a wireless network which is connected to the Internet.
Can Airport Extreme overcome this limitation?
If you connect an AirPort Extreme base station (AEBS) to the DSL modem then you could (a) connect the Mac Mini via Ethernet to the AEBS and (b) have the AX join the wireless network created by the AEBS. Then the Mac Mini could see the Internet and stream music at the same time.

Similar Messages

  • Using Airport Express as internet connection for one Mac and one PC

    Will probably be judged a complete dork for this question. I have successfully set up my Imac G5 to run an internet connection through an Airport express. My partner runs a PC (Windows XP) and I want to connect this too. Have installed a USB wireless card on the PC, and installed Airport Utility, but it just won't find the Airport Express - it will however find the Imac with something like 96% signal strength. So I set up a network on the Mac and have successfully linked into it with the PC, but it soon comes up with a connectivity problem that will not allow internet browsing. So two questions - can I connect two computers to the Airport Express at once for internet browsing, or do I have to do it through linking the PC to a wireless network? If the latter is the route - any ideas on what the connectivity issue will be? Help!

    No, not if the AirPort Express "joins" the wireless network.
    No, I do not want to join a network.
    It is possible to have the AirPort Express "create" a separate wireless network that would not have access to the Internet, but if you did this, you would need to log off of your normal network....(losing your Internet connection) and then log onto the AirPort Express network when you wanted to listen to AirPlay.
    Then, when you wanted to have Internet access, you would have to log off of the AirPort Express network and log back onto your normal wireless network.
    Ok, I understand that it is not possible to use airport express only for sound streaming while having an Internet connection at the same time. Airport express does need to join a network if I want sound streaming next an Internet connection. I wanted airport express not to get into way of my Internet connection because in this case the sound streaming messes up sometimes. When I configure airport express only as a sound output, the problems I encounter fade away but then I cannot access to the Internet. Anyhow thanks a lot for the answer.   

  • Using airport express with 3com modem/router

    Hi all,
    I have a 3COM modem/wifi router with serial code 3CRWE754G72-A.
    I recently purchased a MacBook Pro and to my dismay the wifi does not work with my Router (I have all latest updates etc.). I have no idea why, but apple support say its cos my router is crap and they dont support 3rd party routers (they checked my MBP and found nothing wrong with it apparently, connects to apple base stations no probs)... there are loads of threads on this topic of incompatible wifi routers with the MBP in the MBP discussion area so I wont go into details on that.
    My question is: is there any way the airport express could be of use? From what I understand usually you can use it to extend your wireless network by adding it as a client to the existing network. However I am suspicious if it will pickup on my 3com wireless network... my MBP doesnt so I wouldnt be surprised if this didnt either!! Is it somehow possible to disable the wifi on my 3com router and connect it directly via ethernet to an airport express, and use the airport express solely for createing the wifi network?
    Any other suggestions welcome!

    My question is: is there any way the airport express could be of use?
    The only thing the AirPort Express (AX) could possibly do is join the wireless network created by that router as a client. This would only give you the ability to use the AX's USB printer port and AX's audio output. This would NOT give you the ability to use the AX's Ethernet port.
    If your MacBook Pro can't join the wireless network provided by that device, the AX probably can't either.
    The AX can not be used to extend the network provided by that device nor can the AX's Ethernet port be enabled to allow you to connect your MacBook Pro. Both of these require compatibility with Apple's WDS which that device does not have.

  • Airport Express added for iTunes

    I've got my AEB up-and running in a N network.
    Now I would like to add an Airport Express wirelessly for Airtunes purposes.
    I've read the document "Designing AirPort Networks Using AirPort Utility" and I'm still not sure about the configuration.
    How should I configure the Airport Express to connect to the existing N network.
    There are several possibilities: remote, relay, WDS, extending ...
    Which one to choose and why?
    Your help is very much appreciated. Thanks.

    William,
    I just added an Airport Express N w/ AirTunes to my existing Network that has an AirPort Extreme N. I initially added it as an extension to my network, but my Internet connection dropped frequently. This was because the Extreme and Express where physically located too close to one another; therefor I switched the Express to only just join my existing network instead of extending it and haven't had any problems sinces.
    I think it really depends on the distance your stereo is from your current base station. If your stereo is on the other side of the house extending it would probably be beneficial; however it they are in the next room from one another I would select to only join the existing network instead of extending it.

  • Best Practices for Using Airport Express to Stream iTunes via Ethernet

    So I've been reading various posts about using Airport Express to stream iTunes and I've been reading various posts about using the Ethernet port on the Express. However, not sure I've yet found an inclusive listing of settings for both. Wondering if anyone out there has such a thing?
    I have an (older) Aiport Express (802.11g, no 'n') running the latest Firmware (6.3, I believe). I have it lashed into my switch via a Cat 6 cable and the 3.5 stereo mini running out to RCA jacks into my RussSound (home audio system) amp. I'd like to make the Express ONLY a iTunes streaming device getting its network link over Ethernet (AirTunes). So, what does everyone suggest for best settings for turning on the Ethernet, turning off the WiFi and running AirTunes?
    Thanks much in advance!
    cheers
    cp root

    Airport > Wireless > Wireless mode "off"
    Internet > Internet connection > Connect using "Ethernet", Configure IPv4 "via DHCP"
    Music > Enable Airtunes
    Enable Airtunes over Ethernet (if this choice appears).
    When I first did this, the remote speakers didn't appear in iTunes. I poked around to see what I missed and couldn't find anything wrong, but the next time I ran iTunes the remote speakers appeared.
    If you run into a firewall problem, make sure your OS X firewall is configured to "set access for specific services and applications": http://docs.info.apple.com/article.html?path=Mac/10.5/en/18503.html
    Firmware 6.3 is correct for your Express.

  • Using airport express for itunes and another wireless network for internet

    Is there any way i can use my airport express just for playin music through airtunes, and log onto the internet using a different wireless network?

    Hello bleno567. Welcome to the Apple Discussions!
    Is there any way i can use my airport express just for playin music through airtunes, and log onto the internet using a different wireless network?
    Yes, you just need to configure the AirPort Express Base Station (AX), that will be used to stream iTunes, as a wireless client.

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

    Hi I was wondering :
    Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • Using Airport Express for External speakers and Apple TV.  When I'm on MAC computer adn using internet sound from Internet does not go through external speakers.  Instead it comes out of Mac computer speaker.  Why?

    Using Airport Express for External speakers and Apple TV.  When I'm on MAC computer adn using internet sound from Internet does not go through external speakers.  Instead it comes out of Mac computer speaker.  Why?

    As far as I know, the Airport Express only transmits sounds via Itunes. So every other sound (internet, but also incoming mail) will be coming out of your mac instead of your external speakers.

  • I have to pay per month for using airport express?

    I have to pay per month for using airport express?

    You would need to investigate which Internet Service Providers (ISPs) are available in your area. You can then contact them about pricing for their services. Typically, you pay more for faster Internet upload/download speeds.
    Most ISPs will provide you with a modem and get the service established at your home. From there, you would connect the AirPort Express to this modem to provide a wireless network.

  • I am setting up a used Airport Express. It works fine with my computer for internet connection. Now I am setting it up for Tivo connection. They ask for a Gateway router number.  Where can I find this number?

    I am setting up a used Airport Express.  It works fine and my computer can get on the internet whith no problems.
    I want to enable my Tivo box to connect to this wifi net, Tivo asks for a Gateway Router number. Where can I find this number?

    The "gateway" number for your AirPort Express, by default, is 10.0.1.1

  • Using Airport Express / Airtunes to play audio from Safari / OSX?

    Just bought my first Airport Express. Can I use Airport Express / Airtunes to play out audio from Safari / OSX (or other applications) to my home stereo?

    Hi Fenneberg:
    Welcome to Apple Discussions and congrats on your AE purchase!
    You'll need a 3rd application to stream music to your AE from other applications like Safari. It's called Airfoil and it can be found at: http://www.rogueamoeba.com/airfoil/
    I hope this helps!

  • I use Airport Express to network 3 iMacs to a DSL modem.  Recently, the network became undiscoverable to one of the iMacs.  Suggestions for a fix?

    I use Airport Express to network 3 iMacs to a DSL modem.  The network has become undiscoverable to one of the computers. I have reset the base station to factory settings but this does not help.  The other two computers are unaffected. All 3 computers can access the internet when connected directly to the modem.  I suspect the problem might be the Airport card?  Suggestions?
    beaucleo

    Thx for the suggestion, although I didn't have to reset the SMC to fix the problem. The problem was the handshake between the security password and the designated network.  The following links gave me info for investigationg the problem.
    http://support.apple.com/kb/HT4199
    http://www.ehow.com/how_6831952_test-airport-card.html
    http://www.youtube.com/watch?v=aXiZn64aZfg
    http://www.cnet.com/news/how-to-invoke-and-interpret-the-apple-hardware-tests/
    I would recommend these web sites to anyone who is having problems setting up and/or maintaining a wifi system.
    I discovered after reading one of the web references that if I disabled nework security the problem went away. This, however, was unacceptable.  Further experimentation showed that the solution to my problem was to change the name of my network while keeping the same password.  I tried only changing my password but that didn't help.  I still don't understand why only 1 of the 3 networked iMacs was affected.
    Again, thx for your interest and reply.
    beaucleo

  • I have on airport express that is 5  years old, I now have a new wireless router.  I want to  use the express just for air waving iTunes.  How do I set it up?

    I have on airport express that is 5  years old, I now have a new wireless router.  I want to  use the express just for air waving iTunes.  How do I set it up?

    Hello 84wvu,
    It sounds like you want to setup your Airport Express to Airplay music from iTunes.  I found an article with steps to help you get this setup:
    Connecting to an existing Wi-Fi network, exclusively for iTunes music
    AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
    Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
    How to Set It Up
    Connect your AirPort Express to your home stereo or powered speakers.
    From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
    Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
    I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
    Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
    http://support.apple.com/kb/ht4587
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • How do I change language settings to English?

    I am a native English speaker living in Korea. I am currently using a borrowed laptop while mine is in the shop. It is running Korean Windows (XP, I think). When I downloaded Firefox, as far as I could tell, I had no options of language preferences.

  • Agent commission in the way of rebate

    Hi, Is it possible to pay the commission to the agent in the way of Rebates? Please advise. Regards, Ajit

  • Can't interact with  iCloud preferences in system preferences!

    Since installing Maverick on my Imac 2 weeks ago I have had issues with the Icloud preferences in system preferences. I click on the icon, nothing happens, same with the internet account button. I have been through the process of deleting the icloud

  • New iPod woes, stuck at language selection.

    So I just got my iPod home from the store and turn it on and the first screen I see is to select what language I want to use. It is defaulting to English, with a list of many other languages underneath it but I cannot get it to proceed or even to hig

  • A really annoying problem with a button/movie clip

    I am having a problem with a button! its driving me insane because i managed to do it last week, but that was by chance and now i can't remember how i did it! I can get the button (i'm using gelright from the common libraries panel) and convert it to