Using airport express to charge iPod shuffle

Anyone ever try this? I need to travel out of town for a few days at a time, without a laptop. Seems a waste to purchase a iPod USB charger/adapter when I have this lovely airport express sitting in the next room. Seems to have a USB plug on it. Would fit easily in my carry on luggage.
Thanks for any thoughts.

Thanks FMD. I don't travel often enough to invest in a separate charger, so this might be a good temporary fix while on the road.

Similar Messages

  • Using Airport Express to charge iPod?

    So I plug it into the wall and use the USB cable to hook it up to the iPod... yet there is no charge. From what I've read online, older versions of the APE were able to charge iPods. Has Apple changed something so that they no longer charge, or do I have a defective unit?
    Thanks.

    +do I have a defective unit?+
    don't think so. i can't even get my USB light such as this going. the AE works perfectly, though

  • I have 3 airport express units, an Ipod and a PC.  I used the PC to set up an airTunes and the AirUtility can see all three of the airexpresses.  The Ipod displays all of the airexpresses and I can pick any one to stream music to. PC won't - any ideas?

    I have 3 airport express units, an Ipod and a Windows 7 PC.  I used the PC to set up an iTunes/airTunes and the AirUtility can see all three of the expresses.  The Ipod displays all of the expresses and I can pick any one to stream music to. The PC won't - any ideas? AirUtility tells me the 7.5.2 version of the firmware is the latest for the expresses and ITunes is also reporting that there are no upgrades available.  I get an error code -15000 when I try to connect from the PC to one of the expresses.

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • Ipod HiFi using Airport Express

    Anything I can do to eliminate distortion when I play songs from my computer via Airport Express on my Ipod HiFi? I've tried adjusting the volume, but songs still sound distorted; they get worse if I crank up the volume.
    MacBook   Mac OS X (10.4.7)  

    first, make sure you play the same music file on your computer without any distortion, if yes check the EQ setting on your iTunes. Then recheck the following:-
    1. Are you using the optical cable from airport express to iPod HiFi or analogue minijack cable?, see change the type of cable help.
    2. Check your cable and make sure it is not a faulty one
    3. Is the signal of your airport express is strong enough?
    4. Make sure you plug tight enough on output of airport express and input of iPod HiFi
    5. Disconnecting your iPod HiFi for 15 minutes and try again

  • How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?

    How can I use AirPort Express when traveling?
    Connect the AirPort Express to the Ethernet port in your room.....to be able to create your own private wireless network in your room for multiple devices.
    You will still have to pay the hotel Internet charge for one device, if the hotel charges for Internet access.
    If the hotel only provides wireless service, then a single AirPort Express will not help you.
    However, if you have two AirPort Express devices, then you can use one to "join" the hotel wireless network, then connect the second Express to the first using an Ethernet cable and create your own wireless network for multiple devices in your room.

  • Using Airport Express to extend an existing wired/wireless Dlink network

    Our network uses a Dlink router which must be located in the basement. Our home office Apple computers are wired, and the wireless Apple laptop is almost always used in the living room, directly above the Dlink, so no signal strength problems there. However, the wireless signal does not reach as far as the home office. It's only 20-25 feet away on the main floor, but for some reason, probably structural, the wireless signal doesn't penetrate.
    Now I need to extend wireless access capability to the home office, so that I can use the iPod Touch in the office. I've read through a number of posts, and haven't found one that exactly matches this issue.
    The information about joining an existing network has this sentence in it:
    "Or you can use AirPort Express or AirPort Extreme to extend the range of an existing AirPort Extreme or AirPort Express network by creating a Wireless Distribution System (WDS)."
    The existing network I have isn't an AX network. And it's both wired and wireless. And one of the detailed posts explained why a WDS was not the best way to go. Plus I'm confused by references to "base stations" which seem to refer to something that looks like a Time Capsule, not to an AX.
    If AX will do what I want it to, I'm envisioning plugging it (all by its lonesome) in to a wall outlet in the hallway outside the home office. That's based both on what I want and what the salesperson said AX could do when I explained what was wanted.
    The Dlink network has been working beautifully for months, and I don't want to do anything to screw it up! That includes even opening up the AX utility software until I know exactly what to do.
    Can I do the setup (once it's explained!) on the wired computer? If I have to connect the AX to the network as part of the setup, can I use the 5-port switch that extends the wired connection the extra two feet to the computer (and also provides the wired network connection for the main printer)? Or should I take the laptop downstairs and connect the AX directly to the Dlink router?
    Thanks,
    Marg

    +If I connected the AX by cable to my 5-port switch (which in turn is connected directly to the Dlink), would that constitute "an ethernet connection to the D-Link"? If so, then it should be possible to use it as described in your 6th paragraph, to "expand ... (our) main wireless network" -- is that right?+
    Yes, this will work great.
    +I'd never heard of ethernet powerline adapters, which sound very cool but are not wireless per se - you need a cable to connect the computer with at the far end, and it's wireless capability that I'm trying to create in the home office.+
    Rather than hooking a computer up at one end, you could hook up the AirPort Express at one one and setup wireless that way. You won't need the adapters in this case since you have access to the switch. You may have need sometime in the future to get an ethernet signal to another part of the house, so keep this option in mind.
    Here is how to setup the AirPort Express. You will use AirPort Utility, which should already be on your Mac Pro. Its located Hard Drive > Applications > Utilities.
    Temporarily, connect the AirPort Express (AX) directly to your computer with a short ethernet cable to set it up. When you have the configuration done, you can disconnect the cable and move the AX to the location where it's needed.
    Open AirPort Utility and click Manual Setup
    Click the Base Station tab below the row of icons to enter a name and device password for the device and choose your time zone, etc.
    Then click the AirPort icon in the row of icons at the top of the setup page.
    Click the Wireless tab below the icons
    Wireless Mode....Create a wireless netork
    Wireless Network Name....Exact same name as your D-Link wireless network name
    Radio Mode....802.11n (802.11b/g compatible)
    Channel...Automatic (see note* at bottom)
    Wireless Security...exact same setting as D-Link network
    Wireless Password....exact same setting as D-Link network
    Click the Internet icon in the row of icons
    At the bottom of the page, make sure that the setting for Connection Sharing is set to "Off (Bridge Mode)". This setting allows the AX to work in tandem with the D-Link.
    Update to save settings.
    *Automatic will usually work well for this. Ideally, you want the D-Link and AX to be on channels that are least 5 channels apart. Automatic will usually choose an open channel, but you may need to manually set the channels on both routers for this step.
    Your setup should work fine. Please post back on your progress or questions.

  • MacBook doesn't charge iPod shuffle

    The only way to charge iPod Shuffle is by connecting it via USB port to your computer. So I wonder why on earth my MacBook is not capable to charge it while it is shut down let alone when it is put to sleep! If a battery can be charged in aforementioned situations so should the iPod Shuffle.
    where can I report such incompatibility or where can I put a suggestion for Apple people to work it out?

    Did you download any programmes like
    caffeine to prevent your macbook from sleeping after
    the display has been closed?
    No. It gives every indication that it is sleeping normally: pulsing front light, becomes cool to the touch, wakes when lid opened or key pressed, doesn't do anything strange when awakened. I also haven't used pmset to change the sleep setting from default; it pauses before the sleep light pulsates as if it's writing the sleep image to disk.
    As a matter of fact, it continues to provide power with two different pads. The cheap inline switch on the pad failed and I had it replaced under warranty. The second unit has the same behavior.

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to set up time capsule with existing network that uses airport express/extreme

    I have an existing wirelss network using airport express. I want to upgrade to time capsule and use the A/P express upstairs. I dont want to delete the existing network.

    I suggest to use your airport express to extend your wireless network that is created by your new time capsule

  • How do I use airport express to extend my wireless network?

    How vcan I extend the range of my wireless network using Airport Express?

    It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
    The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
    name of the wireless network
    the correct wireless security settings
    and correct password.
    "Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
    But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
    Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
    This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
    Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
    The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc.  Extremely limited.
    Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
    Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
    If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
    Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet.  What exactly would that achieve?
    That is a completely different subject since this discussion is about extending a wireless network using wireless only.

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

    Hi I was wondering :
    Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

    will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
    The bottom line with a single AirPort Express is no.
    The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
    As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
    In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
    However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private"  wireless network.

  • Why cant i print from my ipad using airport express but i can print from my mac using the express

    why cant i print from my ipad using airport express but i can print from my mac using the express

    Because your printer has to be Airprint compatible and connected to WiFi. There are applications, such as Printopia, that will allow you to print through your computer.

  • After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

    After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.

    OK, I found this thread which answered my question.
    http://discussions.apple.com/thread.jspa?messageID=610763&#610763

Maybe you are looking for