Using Airport Express to listen DVD via Front Row and Optical Out

I want to find out if this is possible:
I currently have Macbook Black Core 2 Duo. I enjoy watching DVDs using Front Row. The DVI video cable goes to the projector which is at the back of my room. Since the Macbook is close to the projector, I have to run optical audio cable to the 5.1 Dolby Digital home theater sound system at the front of my room.
I am interested in the AirPort Express because it can play iTunes wirelessly and use optical output to hook up the stereo system.
The question I want to know is if it's possible to connect Airport Express optical output into my Dobly Digital sound system so I can watch and listen DVD movies via Front Row? If not, any other alternatives? When searching through topics, it seems the users said Rogue Amoeba has a lag issue. Even I am not sure it can do optical output capabilites. Any thoughts. Thanks!
Mac OS X (10.3.9)

KonradL, Welcome to the discussion area!
To stream non-iTunes music to the AirPort Express (AX) you need Airfoil.

Similar Messages

Best Practices for Using Airport Express to Stream iTunes via Ethernet

So I've been reading various posts about using Airport Express to stream iTunes and I've been reading various posts about using the Ethernet port on the Express. However, not sure I've yet found an inclusive listing of settings for both. Wondering if anyone out there has such a thing?
I have an (older) Aiport Express (802.11g, no 'n') running the latest Firmware (6.3, I believe). I have it lashed into my switch via a Cat 6 cable and the 3.5 stereo mini running out to RCA jacks into my RussSound (home audio system) amp. I'd like to make the Express ONLY a iTunes streaming device getting its network link over Ethernet (AirTunes). So, what does everyone suggest for best settings for turning on the Ethernet, turning off the WiFi and running AirTunes?
Thanks much in advance!
cheers
cp root

Airport > Wireless > Wireless mode "off"
Internet > Internet connection > Connect using "Ethernet", Configure IPv4 "via DHCP"
Music > Enable Airtunes
Enable Airtunes over Ethernet (if this choice appears).
When I first did this, the remote speakers didn't appear in iTunes. I poked around to see what I missed and couldn't find anything wrong, but the next time I ran iTunes the remote speakers appeared.
If you run into a firewall problem, make sure your OS X firewall is configured to "set access for specific services and applications": http://docs.info.apple.com/article.html?path=Mac/10.5/en/18503.html
Firmware 6.3 is correct for your Express.

Using airport express to extend network via ethernet socket

I have a wireless router set up which feeds my mac and tv (via a wired ethernet connection). I have also a pc which doesn't have wifi capability.
Can I use airport express to make my pc pick up the wifi by plugging the pc into the ethernet socket? I would also plug a printer (currently connected to the pc) into the usb, so it can become a shared printer.
Thanks

Can I use airport express to make my pc pick up the wifi by plugging the pc into the ethernet socket?
Yes. But, it is the AirPort Express that would "pick up the wifi". Then, you would connect an Ethernet cable from the AirPort Express to the PC.
Configure the AirPort Express to "Join a wireless network" and click the option to "Enable Ethernet clients" during the setup to activate the Ethernet port on the device.
I would also plug a printer (currently connected to the pc) into the usb, so it can become a shared printer.
There is a good chance that your printer will work connected this way, but you won't really know until you try.

Using Airport Express as internet connection for one Mac and one PC

Will probably be judged a complete dork for this question. I have successfully set up my Imac G5 to run an internet connection through an Airport express. My partner runs a PC (Windows XP) and I want to connect this too. Have installed a USB wireless card on the PC, and installed Airport Utility, but it just won't find the Airport Express - it will however find the Imac with something like 96% signal strength. So I set up a network on the Mac and have successfully linked into it with the PC, but it soon comes up with a connectivity problem that will not allow internet browsing. So two questions - can I connect two computers to the Airport Express at once for internet browsing, or do I have to do it through linking the PC to a wireless network? If the latter is the route - any ideas on what the connectivity issue will be? Help!

No, not if the AirPort Express "joins" the wireless network.
No, I do not want to join a network.
It is possible to have the AirPort Express "create" a separate wireless network that would not have access to the Internet, but if you did this, you would need to log off of your normal network....(losing your Internet connection) and then log onto the AirPort Express network when you wanted to listen to AirPlay.
Then, when you wanted to have Internet access, you would have to log off of the AirPort Express network and log back onto your normal wireless network.
Ok, I understand that it is not possible to use airport express only for sound streaming while having an Internet connection at the same time. Airport express does need to join a network if I want sound streaming next an Internet connection. I wanted airport express not to get into way of my Internet connection because in this case the sound streaming messes up sometimes. When I configure airport express only as a sound output, the problems I encounter fade away but then I cannot access to the Internet. Anyhow thanks a lot for the answer.

Trouble using Airport Express Base Station with DSL modem, Router and Hub

About 18 months ago, I had an Airport (802.11b) with WAN & LAN ports and modem hooked up to support two laptops, a Titanium Powerbook G4/600 and G3/400. The setup went from DSL modem -> Linksys router -> to Airport -> Hub (which had desktop and ethernet laser printer plugged in). The network worked fine.
Then, I got a G4 iBook to replace G3/400. Wanted to get 802.11g to support “g” Airport card in iBook. Got a Linksys 802.11g Wi-Fi with 4-port router for $50. Hooked it up directly with DSL modem. (Couldn’t get it to send out to hub). Hooked the desktop and ethernet laser printer into Linksys Wi-Fi/router. The only way I could use the printer was by having it be a shared printer from the desktop. This was often problematic.
Two months ago, I got a refurbished Airport Extreme Base Station. I can’t get the AEBS to interface directly with the DSL modem, so I hooked it up as follows:
DSL modem -> Linksys router -> to AEBS -> Hub. I plugged my Epson 820 (USB) into the AEBS and can see it to print to.
I have a static IP. That info is entered into Linksys router. Router set as Gateway, with DHCP enabled. AEBS is set to Connect using Ethernet, Configure using DHCP. Network setting: Distribute IP Addresses is unchecked.
Here’s my issue:
I can’t see the ethernet laser printer. It will occasionally flash available, but is gone in less than a minute. The printer is HP 2100 series.
Sometimes I can connect to the desktop G4 tower; most times I can’t.
I have checked and double-checked the cables.
Both the printer and desktop are connected to the Hub.
What can I do so that I can see the HP 2100 series printer and the G4 tower?

Don,
Thanks for the suggestions. Glutton for punishment that I am, I tried this again, “just for grins.“ The six other times I tried this, I couldn’t get the AEBS to “see” the Internet. And lo, this time it worked. Here’s the setup now:
DSL modem -> AEBS -> 4-port hub (which is connected to G4 tower and HP 2100 Ethernet printer). My USB Epson is connected to the AEBS, and I can print from the laptops. AEBS is set up: manual IP info, Network: distribute IP address; share a single IP using DHCP.
When I still couldn’t see the desktop G4 and the Ethernet HP 2100 connected via the hub (not), I got a flash. I had swapped out the cable a number of times to no avail. Then I realized, the hub is old and all the cables I was using are the new CAT5s. I dug out an old four-wire with RJ45 connectors that my husband made years ago (probably a cross-over cable). It was quite an effort as the cable is 30 ft. long and wrapped around the perimeter of the office behind desks and file cabinets, entwined with all the other wires. But I plugged it in and, Shazam! I am WORKING!
And, Don, thanks to you, I have eliminated the router from my gaggle of electronic boxes.

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

Front Row and Ripped DVDs

Hi
Does anyone know how I get ripped DVDs (using Mac the Ripper) to play via Front Row? When I go through the Video menu I can select the Video_TS menu but it says that there are no movies available in that directory.
Thanks

... HandBrake to rip DVD's onto my MacBook
It does but it messes up the video. That is, no matter what quality setting you set (I tried it all), you end up with something that looks more like some old, worn out VHS tape than the source DVD. It also looks like iTunes can't handle more than 2 audio channels for playback. It makes me wonder about the new Apple TV. Would it also be limited to lousy video and 2-channel audio?
G5-Quad Mac OS X (10.4.5)

I have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

i have a MacBook Pro and just added an airport express to listen to my iTunes on my stereo. How do I get Firefox to use my AX when I use Grooveshark or Pandora?

If the purchases are all from the same account then you can share the content by authorizing each device.
If you have separate accounts then you have to be authorized to use the content purchased from another account.
MJ

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

HT1515 do you need to connect the airport express to a router via ethernet or can it do it using wireless?

do you need to connect the airport express to a router via ethernet or can it do it using wireless?

There are 3 Apple routers....AirPort Express, AirPort Extreme and Time Capsule. Details here:
http://www.apple.com/compare-wifi-models/
Do you have one of these products in the living room?
If no, you can only use the AirPort Express by connecting to the router in the living room using an Ethernet cable at all times.

Using Airport Express with an ATT DSL router

July 10, 2012
Hi All! The following thoughts are for
     1) those of you who use ATT DSL as your internet service-provider, and
     2) who wish to stream iTunes songs from your computer to speakers in other rooms via AIRPORT EXPRESSes, and
     3) are wondering whether you have to purchase a separate Apple Airport Extreme base-station, or can simply use your exisiting ATT router.
Having just spent several days and many hours on the phone before Apple's tech "Dan" was finally able to get my system up and running, I thought some of you might appreciate my sharing the following info while it's still fresh in my mind.
1. You may need to update your ATT router to the latest version, in order for it to properly communicate with your AIRPORT EXPRESS(es) (henceforth shortened to "AEs"). The AEs use 802.11n speed. My original ATT router (a 2Wire 2701HG-B) was no faster than "-h," and this might have been part of the problem as to why my system wouldn't work. I went to my local AT&T store, and got their latest router: as of this writing, a Netgear "Westell" Model B90-755025-15, which can run at both the slower speeds as well as the faster "-n." To find out some of the specs of my router, an Apple tech had me type in the 10 digits of my Gateway IP Address into the address-bar (no need for the "https://www") and "Presto!", up popped several pages of info on my router.
2. When first setting up your AE, it needs to be back in "default mode." If it's right out of the box, you don't need to do anything. But if, like me, you've already made several attempts to get it running, then you need to reset it to its pre-configured state, You do that by taking a bent paper-clip, and inserting one end into the little hole on the ports-side of your AE (near where the mini-plug of a speaker-cable is inserted). While the device is plugged in, gently press the paper-clip into the hole until the light on top blinks amber QUICKLY, the flashes coming in rapid succession. Then remove the paper-clip, and the AE will glow solid amber--meaning it's waiting to be re-programmed.
3. When first setting up your AE, do NOT attach an ETHERNET CABLE from the router. The only cable that needs to be attached is the mini-plug cable running to some sort of portable, powered speaker. For myself, to make things easier, I brought my AE and my new Sony RDP-M5iP speaker/dock into the same room as my Imac & router. That way, I'd know immediately if the AE was working correctly.
4. After you've clicked on your Airport Utility App (hard drive TO Applications TO Utilities folder), you'll soon come to a page that asks you to name your AE (this page calls it a "base station"). Before you do that, you should see a button in the lower left-hand corner that says, "Other Options." Click on it. You'll then be given a choice of "Creating a New Network" or "Choosing an Existing Network." You want this 2nd choice--because you indeed are planning to use your ATT router's exisitng wireless network.
5. Shortly, you'll come to the page asking you to name your AE. Call it, for instance, "Family Room Speaker." As for password, at first I--as well as virtually all of the techs with whom I spoke--thought I should type in the multi-digit ATT router-password (called a "Wireless Network Key"). But finally, "Dan" told me to simply type in, "express1" (or, for my 2nd AE, "express2"). That did the trick!
6. Your AE should now be glowing green on top. Plus, on the 10x6" dark-grey rectangular box displaying the globe (i.e., your main internet connection), the globe should have a now-green glowing circle to its left. And underneath, it should be displaying a rectangle named "Family Room Speaker" (or whatever name you've given your Airport Express).
7. When you now open iTunes, you should see a little blue rectangle (with a triangle in its middle) in the lower right-hand corner of your iTunes box. Click on it, and it should show listed both your computer-speaker as well as your AE speaker(s), plus a heading called "multiple speakers." Click on "multiple," and it will bring up a box displaying all your now-current speakers. Check the small square next to any speakers that are unchecked, and a volume-slider will appear. Bring them all up to a comfortable level. Then click on an iTunes track you'd like to play and, viola!, you should hear music playing both from your computer and from the portable speaker to which your AE is attached.
8. Now close iTunes. Then unplug your Airport Express and--if you have a 2nd AE-- plug them both back into your power-strip. Go thru the set-up steps in your Airport Utility App for this 2nd AE. At the end of it, both AEs should be glowing green on top, and both should be displayed on your computer-screen.
Now re-open iTunes, and start a song playing. (Don't forget to click on the blue rectangle at the R-hand bottom, and activate the new AE speaker.) By inserting your speaker cable alternately into each of the AEs, you should be able to verify that, yes, both are now working.
9. Unplug both AEs, and bring them to whatever room you want to use them in. Plug them in to a wall outlet, and run your mini-cable from the AE to the speaker. Give the AEs a few minutes to pick up the signal once again from your ATT router; when they do, their lights will change from amber back to green. Tech Dan warned me to keep them away from too much metal, to avoid interference. As soon as they turn green, you should now be hearing your iTunes track playing thruout your house! (If not, you may have to first close iTunes on your computer, then re-open it, and start a new track playing.)
The BOTTOM LINE: no, you don't have to purchase a separate Apple Extreme to be your base-station. Your ATT router--if it's running at the 802.11n standard--should be able to work with your Airport Express(es)!
My thanks to Sean and Cameron and Chris and, most especially, Dan, the Apple techs who patiently worked with me to get this system online.

I am GREATLY appreciative of this overview. Even though I don't understand a lot of it. I will keep working through. I am-- have for 2 years-- had terrible connectivity with AT&T's service & 2Wire router. My MacBookPro keeps dropping the signal. I'm talking every few clicks at times. Husband's PC drops it, too, but not nearly as much as the Mac. I'm sure what you posted can help us get better connectivity.

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

Connecting Airport Express (n) to WRT54G via ethernet

I am using Airport Express (n) currently and would like to connect to Blu-ray player with ethernet for netflix streaming. But as we all know, the AX has only one ethernet port. I have an old linksys' WRT54G. Is it possible to use this as a part of network without loosing the advantage of Wireless N network? My idea is to go from Cable modem to WRT54G, and WRT54G's LAN PORT out to AX. WRT54G and AX will be connected via ethernet so that it doesn't lose the advantage of the N network.
And Blu-Ray player will be connected to WRT54G via ethernet.
Can someone tell me if this works and if so, how do you configure each device so that you don't have ip address conflict or any other problem. Thank you.
Message was edited by: Kozo Okumura

Certainly that will work. Since they are connected via Ethernet, the wireless clients of the WRT54G will have no effect on the wireless clients of the AX.
The WRT54G will provide a 802.11b/g network while the AX can provide an 802.11n network.
The AX should be configured to create a wireless 802.11n network and it should be configured to act as a bridge (not sharing a single IP address).

Connecting a webcam using airport Express.

I have a Logitech webcam that I use with ichat. The webcam is working fine when connected directly to the MacBook via usb port. I would like relocating the webcam and use Airport Express to connect it wireless. Is it possible?

hi
the only option is to get a wireless webcam for Mac
you can do search on
http://www.google.co.uk/search?hl=&q=macwirelesswebcam&sourceid=navclient-ff&rlz=1B3GGLL_en-GBGB393GB393&ie=UTF-8
there are couple around but the image quality is not as good as you get from a usb webcam but hey it still good if you are doing surveillance purpose

Using Airport Express to listen DVD via Front Row and Optical Out

Similar Messages

Maybe you are looking for