Using Airport Extreme BS with home stereo

Our network's up and running; now we wonder what is involved in using the Airport Extreme to convey music to wireless speakers throughout the house.
Since we need so many questions anwsered (what 3rd party equipment is compatible, how to set it up, what if 2 computers are listening to different music on two computers, etc.) perhaps someone can refer us to an article or two that review this. We have a Panasonic DVD player with one wireless speaker but no idea as to compatibility.
Thanks!

Timothy asked,
When you say 'wireless speaker' what do you mean? Does it appear on your wireless network somehow?
No it does not.
I think I need to read up on this whole matter. The terminology is confusing, not just "extreme" and "express", but also what does "wireless" mean. Our stereo has several speakers and one is not connected to it via a cable, so is "wireless". Silly me, I thought maybe the wireless network produced by our new Airport Extreme Base Station was the same as the wireless connexion between the stereo and its speaker.
I had skipped over audio articles in the Mac magazines as not of interest to me, then we got a new iMac and had to upgrade from a cable modem serving one computer to a wireless network that would serve all 3 computers. We did this on the spur of the moment without considering other uses of the network.
I have perused Apple's product pages about both the Airport Express and the Airport Extreme and have to admit I am still not sure if the Express does everything the Extreme does, and more, or if it is just an add-on for the purpose of streaming music over an existing network. I will look for something online that gives a complete rundown on these matters; my ignorance goes beyond the scope of asking forum members to illumine me! Thanks!

Similar Messages

Using Airport Extreme away from home.

I am away from home and brought my airport express with me. Is there a way to hook it up
to the Verizon hi-speed box at the house I am renting?

Hello jackie Cohen. Welcome to the Apple Discussions!
Since your AirPort Express Base Station (AX) is most likely configured for your home network setting, you will either need to reconfigure it for the house you are staying now or reset it back to its "out-of-the-box" configuration so that it will operate as a basic wireless router.

Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn)

Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn) Enter your DSL Account logon psassword to switch the internet connection to this computer. If I do that, other messages follow. I am usually able to switch connection, but can have only one device on internet at a time. Tried to correct problem using Airport Utility, but failed.

Unfortunately, there is mass confusion about whether a device might be a modem or a modem/router since the terms are mixed up all the time. Even though a device might have only one Ethernet port, it can still be a router.
If this is your "modem".......
http://reviews.cnet.com/routers/netopia-cayman-3341-router/4507-3319_7-30484785. html
It is not a modem.....it is a modem/router. If that is the case, then the AirPort Extreme is not the only router on your network....it is one of two routers, and it should be configured to operate in Bridge Mode.
Does this device appear to be your "modem"?

Using an Airport Extreme router with PC.

I was told that I could use the Apple Airport Extreme router with my PC - but I can't seem to figure it out. Any suggestions to get started?

Sorry to be so ignorant when it comes to this type of stuff. I have a laptop (Dell) and a home computer (PC). The Apple man told me all I had to do with my previous router was unplug it and plug in the Extreme and it would walk me through the steps. It didn't. I think I may have changed some settings on the PC. Now I can't even get the previous router to work so I'm hardwired in on my laptop to even get here.
Do I need to hardwire in the PC, download the above utility, then try to hook up the Extreme router? How do I make it "secure" or locked so no one else can use it other than ones with the key code?
Thanks so much for the above information. Going to try it now.

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal?

How do you use Airport extreme at hotels etc, when traveling? I can plug my computer into the Airport with my ethernet but how does Airport pickup signal? What equipment & devices do I need to travel with to make this possible?

You may mean the AirPort Express.....not AirPort Extreme.....as the Express is a popular travel router.
The whole idea behind using this device is that the hotel must provide an Ethernet jack in the hotel room. Then you connect the AirPort Express to the Ethernet jack with an Ethernet cable and configure it to provide your own wireless network in the room. You still have to agree to terms, pay the fees, etc.
The problem with this approach is that it is getting very difficult to find hotels in North America that prrovide an Ethernet jack....most have moved to wireless networks and the others are not far behind.
So, if the hotel is already providing a wireless signal, the AirPort Express is of no use in that situation.
If you normally stay at the same hotels, and know that they provide Ethernet ports, an AirPort Express might make sense in terms of convenience.

How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

Hi,
This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
Jamie

Can i use airport extreme as wifi range extender in conjunction with a Linksys AE4500 router

can i use airport extreme base station as wifi range extender in conjunction with a Linksys AE4500 router

If you are trying to "extend" using wireless only......Apple tells us that their "extend a wireless network" feature is designed to only work with other Apple routers.
So, in order to use your AirPort Extreme as an extender, you would need to have another Apple router.....an AirPort Express, Time Capsule, or another AirPort Extreme as the main base station.
I haven't tested the specific Linksys model that you have, but have owned and worked with several other Linksys models, none of which were compatible with Apple for the purpose that you ask about....so I would have to say that it is extremely unlikely that your model would be compatible with the AirPort Extreme.

HT4199 libratone live set up using airport extreme

The instructions for setting up the Libratone live speakers to the router, asks that you press the WPS button but there is no WPS button on the Aiport Extreme. Therefore does anyone know how I set up the Libratone speaker using Airport Extreme?

It would be neat though, to be able to connect
wirelessly on my Dell WinXP laptop over this dial-up
connection at home, the few times I'm going to use
it. So I thought eBaying one of those nice "old"
hockey puck Airport Extremes with built-in 56k
modem.
That should work.
From what I understood, the AE doesn't have a
web-based configuration interface, like most
broadband routers have, but one needs to configure it
installing a software utility, right?
Correct
Being in a
Windows only environment, will I be able to configure
my Airport Extreme-to-be using the Windows software
on
<http://docs.info.apple.com/article.html?artnum=75422>
Yes.
http://www.apple.com/support/downloads/airport42forwindows.html
? Does anyone of you have any experience with this?
Yes
If so, could you reassure me that this is actually a
feasible idea?
Yes if does work.
Does the AE dial-in automatically whenever you're
generating traffic, by the way, or do you still have
to establish the connection manually?
You can configure it that way, but it is easier to use Jon Sevy's Java utility.
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility

Network set up using airport extreme, time capsule and airport express

I have searched for relevant answers but can only find different bits here and there.
My set up is as follows:
I have a Linksys wireless router running a stable wireless network for the other computer users in the house and wish to create an extended, additional network using airport extreme connected to the Linksys by ethernet to create the network and then time capsule close to my Mac Mini on my desktop and airport express at the other end of the house to try and extend the range of the network.
I have been trying for 4 days to set this up but without success. I have tried all of the options mentioned in different posts, using WDS, extending a new network etc. I can get connection between the three devices but monitoring on iStumbler there appears to be little improvement in the strength of the signal, iStumbler also shows the time capsule dropping it's signal totally every 10 or so seconds for a few seconds and then I get a positive signal strength for another ten seconds or so.
Can anyone help, it is driving me insane. I am a recent convert to apple computing and have been hugely impressed with all products until now. The claim that the set up of these wireless products is simple seems to be very exaggerated.
I am happy to provide any relevant system or hardware information.
Thanks in anticipation.

I have an AirPort Extreme acting as a wireless base station, connected to a BT router by ethernet.
Then the correct setting for Connection Sharing on the AirPort Extreme would be "Off (Bridge Mode)".
If I set Connection Sharing to "Share a public IP address", I'm told that: "The DCHP range you have entered conflicts with the WAN IP address of your Apple Wi-Fi base station"
Exactly. You have two routers....The BT device and the AirPort Extreme in series with both of them trying to act as the "main" router when you configure the AirPort this way. That won't work.
Only one can be the main router, and it must be the BT device in your setup. So, the AirPort Extreme....and any other AirPorts on your network must be setup to work in Bridge Mode to allow the network to operate correctly.

Can you use airport extreme as a bridge to netgear wdnr4500 wireless router

can you use airport extreme as a bridge with a netgear wndr4500 router.I need to extend my wireless connections to the other side of the house

can you use airport extreme as a bridge with a netgear wndr4500 router.
This is extremely unlikely. The AirPort Extreme can provide this function with other Apple routers, but as far we know, it is not compatible with products from other manufacturers for this purpose.
Suggest that you use a Netgear product for the best chance of compatibility.

I currently use Airport Extreme Wanting to extend using another apple airport express

How to set up Airport Express when already using Airport Extreme to extend range.

Extending the range of an 802.11n network
AirPort Utility makes it simple to extend the range of an 802.11n network if you are connecting another 802.11n base station. Connecting two 802.11n AirPort Extreme Base Stations greatly simplifies the WDS setup process.
To extend the range of an 802.11n network:
Open AirPort Utility and select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
Enter the network name and wireless password if necessary.
Click Update to update the base station with new network settings.

Will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

will the airport extreme work with Iphone 4 and Ipod 3 gen without a pc or mac.

You can setup an Airport device using the Apple Airport Utility for iPhone
Download it for free in the App Store on your iPhone...
It's under "Utilities" and the "Top Free" utilities.

Used Airport Extreme Show Old Location

I bought a used Airport Extreme 802.11ac on eBay. Now using any location services on Safari or Apple Maps shows me at the location of the seller. I have tried going into Skyhook and giving them its MAC address and my correct log/lat, but it has not helped. They say it should take effect immediately in most cases, but so far it has had no efffect.
Our iPhones pick up the correct location, so I have tried connecting my MacBook, and iPads to an iPhone's personal hotspot and also tried leaving both of our iPhones running both Apple and Google maps all day, and again this has not helped.
Is it just going to take a very long time for the databases that have that used Airport's MAC listed at the old location to finally pick up the new one?
Thanks for any and all advice.

Well, after waiting 4+ weeks I called Apple Support. (Luckily the Airport Extreme I bought on eBay was new/open box and with my dated proof of purchase Apple let me register it for the remaining warranty period. I mislabeled the original question as Used) A really helpful support person (like nearly every one at Apple I had encountered) worked with me.
We reset it again to factory settings, checked that my ISP provided Arris cable/WIFI router 's network showed my correct location (which it did) without the Airport connected, then reconnected the Airport Extreme. But as soon as we reconnected it, both the Arris and Airport WIFI networks showed me back in the completely incorrect location. My support person consulted with another and they concluded that they needed to swap it out for a replacement, that this was not normal behavior after a reset to factory specs.
The replacement arrived today, and after setup immediately reported my correct location.

Re : Apple TV doesn't connect to a Wi-Fi Broadband Internet Service using Airport Extreme

Hi, using Airport Extreme (Airport Utility version 6.3.2, Internet :DHCP, Router mode : Off (Bridge)) with a Wi-Fi Broadband Internet service. My Desktop (iMac), Macbook,iPhone,iPad join the Airport Extreme Wirelessi network (WPA/WPA2 Personal) easily and Broadband ISP Login-page pops up with username & password options. However, in case of Apple TV (2nd Generation Software : 6.0.2 (6646.81.1)), it connects the Airport Extreme W-Fi network easily but no Broadband ISP Login-page pops up with username & password options. Even using the Ethernet connection of the said Wi-Fi Broadband Internet Service directly to the Apple TV, no internet network connects. Please help.

There is no way you can handle login details with the ATV and there is probably no way you can do it with extreme in router mode either.. If you need to use a login name and password via a html screen then that is impossible in a device without html.
But your newest addition confuses me.
A slight correction in the question : the Broadband Internet Service isn't Wireless, but having Ethernet connection to the Airport Extreme.
So how do your iphones pop up a login page.
easily and Broadband ISP Login-page pops up with username & password options.
The alternative method is to use a computer .. login to your service and use ICS through the computer to the ATV..
See http://www.youtube.com/watch?v=0jJe_BkQMRc
Or any site that shows how to route internet through a computer.

AirPort Extreme compatibility with native IPv6

Fibre To The Cabinet becomes available soon in my street, in the UK.
Speaking to two ISPs who offer IPv6 native service, both say that their customers trying to use AirPort Extreme routers for IPv6 natively are experiencing problems.
They both say that the device only works when setup in tunnel mode.
My understanding is that such a setup is inferior.
Both ISPs blame the device for the lack of compatibility.
Has anyone here experienced this problem?
Has anyone here found a provider with whom this works?
Thanks for any suggestions.

I tested it, does not really work either. I just submitted an enhancement request via apple.com/feedback to ask if they want to add native v6 over PPPoE.
I hope they take it into account.

Using Airport Extreme BS with home stereo

Similar Messages

Maybe you are looking for