Using Airport Extreme wireless to connect wired devices

Hello,
I am renting an apartment which includes wireless internet access. The only problem is I have several devices which I do not have wireless adapters for (tv, xbox). I have an airport extreme (A 1408) which I would like to use to connect to my landlord's wireless and provide wired internet access to the non-wireless devices. Is this possible? My landlord has a belkin router, so extending the network is not possible.
Thanks for your help.

Unfortunately, the Ethernet ports are only active when the Extreme "extends" a wireless network.....but it is not compatible with a Belkin product for this purpose.
Ironically, the less expensive AirPort Express can be configured to "join" a wireless network and provide an Ethernet signal to the AirPort Extreme.
Frankly, this is an "iffy" type of setup that will require that you know exactly what type of wireless security setttings the Belkin router is using, so the Express will join the network correctly.
To further complicate things, the newer versions of AirPort Utility in Mountain Lion and Lion do not lend themselves well to this type of setup. You will need to use an older 5.x version of AirPort Utility for this type of configuration.
If you decide to try an AirPort Express, it might be a good idea to understand the store's return policy in advance in case things do not work out as hoped.

Similar Messages

Recently bought airport Extreme and have connected the device to the modem. WIFI works. However when I connect the LAN port to a switch I do not see the LAN printer and my NAS. Which setting do I miss?

I have installed my Airport Extreme and have conencted it directly to a modem. WIFI works fine. However I do not see my LAN network (printer. NAS,..).
Analysis:
Scen#1: When I connect the LAN port of the Airport Extreme to a switch (as input) and connect the other LAN devices also to the switch, those LAN devices do not have access to the internet. Also connecting the iPAD with WIFI to the Airport Extreme I cannot find my LAN printer and other devices.
Scen#2: When I connect the LAN port of the Airport Extreme to a router X (as input) and connect the router X to the same switch, and the LAN devices to the switch, those LAN devices do have access to the internet. Also connecting the iPAD with WIFI to the router X I can find my LAN printer and other devices in the LAN network.
Question what has impacted the behaviour of the Airport Extreme, not to detect the devices in the LAN network. Why is the use of a switch directly behind the Airport Extreme not working (no internet access for the other devices and Airport Extreme is not the basis station for the LAN network)?

Your scenario #1 is a correct configuration and should work. It seems as though your Extreme is not acting as a router as I believe you intend.
Most likely, you need to reset your modem. Power it down and let it rest for a few moments. Some need longer than others. Then, I recommend you "hard reset" your Extreme (see below) and configure it again, after the modem has been reset. From then on do not change what is connected to your modem without powering it down first.
Once configured, confirm your Extreme's wireless network works as expected and that your iPad and every other wireless device can load web pages. Then, connect the printer directly to one of the Extreme's LAN ports and confirm that it works as well. After that it should work equally well with a switch between it and the Extreme, as should every other wired device connected to the switch. This assumes your switch is an unmanaged device requiring no specific configuration.
Scenario #2: Having a router connected downstream of another is not a normal configuration, so don't pursue that as a solution. It will only distract you from determining the problem. If you want to repurpose Router X as another device do so only after everything else is working to your satisfaction.
To "hard reset" an AirPort Base Station: make sure it's powered up, then press and hold its tiny reset button and keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Using AirPort Extreme hub to connect to stereo

Is it possible to use a second Airport Extreme hub to connect to stereo speakers?
If it is, what kind of cable might one use to do this?
Thanks
Charles
iBook G4 Mac OS X (10.4)

No, the AirPort Extreme base station (AEBS) does not have any type of audio output.
Are you thinking of the AirPort Express which does have an audio output?

HP Deskjet 3550 cannot print using Airport Extreme via USB connection on Windows 7 64 bits

Product Name and Number: HP Deskjet 3550 Inkjet Printer
Operating System installed: Windows 7 Home Premium 64 bits
Error message: None
Any changes made to your system before the issue occurred: Setting up HP printer using Airport Utility to add a new printer and installed Bonjour Print Wizard.
Problem: My printer is already set up using Airport Utility. When I print something, the printer doesn't do anything. Is there something I haven't done lately in order to get this printer working using my wifi router?
Suggestion #1: Are the print jobs getting stuck in the print queue? You can check this by clicking on the printer icon in your task tray by the clock.
Error Message #1: Yes, the print job got stuck in the print queue, but the moment, it disappeared from the print queue and the printer doesn't print at all. This is frustrating.
Suggestion #2: Does the printer work as expected if you connect it directly to the PC via USB?
Error Message #2: Yes, the printer works if I connect it directly to my PC via USB, but I don't understand why it wouldn't work with the wifi router, though.
Suggestion #3: This has to do with the way the router handles the connection to the printer. I found another thread, regarding this issue, and it has some information that may help resolve it.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Print-Problem-Using -USB-Printer-on-Airp...
If that does not help, I would recommend posting on the Apple forums, as they may have more expertise with the router's abilities:
https://discussions.apple.com/community/wireless/airport
Error Message #3: After clicking on the first link that you posted, it was very helpful, but the printer couldn't print completely and somehow it would stop at the quarter of a paper. It looks incomplete when I took it out from my printer. It does that every time.

UPDATE!
Problem solved! So this is just a followup in case someone else ever stumbles into these boards with the same or similar problems as mine, that is, trying to run an HP Deskjet D1500 series printer [mine's a D1520] on an Airport Extreme wifi router's USB port as a network printer [with the Airport Extreme controlled by an ancient G4 PowerMac Quicksilver currently running OS X 10.4.11).
Although it probably SHOULDN'T matter, since this type of printer works fine with just the Tricolor cartridge as shipped when hooked up directly to a computer's USB port, on a hunch I got a black HP cartridge (that's a type 21, not type 22 as I had earlier said), slapped it in, tried a test page, and all's well. So, we can call off the technoid hounds. Everything running perfectly.
I hope this message in a bottle may help someone else out there some day soon who may be scratching his or her head with a similar stumper. And just to recap those important Windows printer settings, they are:
* [Printer Properties--> Ports--> Add New Port...] "Standard TCP/IP Port"
* [Configure Port] IP Address "10.0.1.1" and Port "9100"
Best of luck!
Bilgey

Using airport extreme card to connect iPhone to internet of mac ?

Is it possible to use a mac as wireless"base-station" for a iPhone by using an airport extreme card , if the mac is connected only by wire?
I created a network on my mac and my iPhone is connected to it, but it says the network is not connected to internet.
So can I connect the airport extreme card on my mac to the ethernet of my mac by changing the network settings on my mac?

Read here:
http://computers.tutsplus.com/tutorials/how-to-share-your-macs-internet-connecti on--mac-60309

Speed drops using Airport extreme on ADSL2+ Connection

Hi, I figure when I connect through my AEBS (2m distance to G5) I loose a lot of speed compared to the full speed of 18M down and 1M up when I connect my G5 direct with Ethernet Cable to my modem. The Internet provider Company told me that I have to uncheck the "send Echo" option in the PPPoE settings and that works fine without the AEBS.
I just don´t find the option to uncheck this in the Airport Admin Program.
Any Ideas? Thanks a lot for your help in advance!
Robert
POwermac G5 Dual 2,7-4GB ATIX800XT & Powerbook G4 TI Mac OS X (10.4.6) 2 x 23" Cinema Display, Airport Express

Hi Macfink. Thanks a lot for sharing your thoughts. I tried with your settings but no recognizable speed enhancements showed. Stll using the AEBS I get about 150KB/sec down speed compared to 2MB/sec connecting directly to my modem via Ethernet cable. As it seems the problem is within the PPPoE settings. When I check or uncheck the option "send PPP echo packets" (translated from my german OS) the speed changes dramatically. And this is excactly what my network provider told me to do. The only problem is that in the AEBS configuration I cannot find any option like this. I went through many forums already, maybe I´ll spend the 50$ for a call to Apple one day, possibly to hear that there is no solution to this issue.
Thanks, Robert

Can i connect a new airport extreme wirelessly to an existing airport extreme to extend range? if so, how?

My mother has an airport extreme hardwired to a modem for wireless connection in her home. she is trying to get a wireless connection in her shop, about 250 away and i was wondering if i can use another airport extreme wirelessly to connect to the wired extreme to extend the range

And, by clear line of sight Bob means nothing between the two but air space. Windows, walls, trees, bushes, etc. all act to attenuate the signal substantially, thus reducing the effective range.
If you are willing to spend lots of money you can purchase amplifiers that can extend the range. Check this out at QuickerTek.com.

Can I print from my iPad using airport extreme?

Can I print from my iPad using airport extreme 802.11n ?

iOS devices use AirPrint to print directly to a printer. That would require a printer that is AirPrint-ready. Unfortunately, just connecting a non-AirPrint-ready printer to the USB or Ethernet ports of the AirPort Extreme Base Station (AEBS), will NOT enable it for AirPrint.

Using Airport Extreme as a wireless adapter for an xbox 360 and/or computer

I have a wifi network that is successfully broadcasting internet, i also have a spare Airport Extreme that i would like to use as a wireless adapter for my xbox 360.
My Existing network is being broadcast from a D-Link modem so it doesn't support "extending a network" with airport extreme
What i want to achieve is:
Wifi Internet being broadcast by d-link, received by Airport Extreme WIRELESSLY, then sent via a WIRE to my xbox 360's ethernet port so that i can access internet on my xbox 360.
Unfortunately:
My Xbox 360 doesn't have built in wireless
Connecting to the d-link network wirelessly (with the airport extreme) doesn't seem to give me a wired internet connection (from the airport extreme)
I don't want to extend the network wirelessly
Any help would be appreciated
Thanks in advance to any users who know how to solve my (probably simple) problem

Welcome to the discussions, DanSwiggsD!
If you have a non-Apple device as your main router, unfortunately the AirPort Extreme has almost no chance of compatibility with your main router.
If you do have an Apple router as your main device, please post back with your model number and we'll let you know how your devices should be configured.
If you don't have an Apple device as your main router you have a few options to connect the xbox:
1) A pair of ethernet powerline adapters could be used if you did not want to run a regular ethernet cable from your main router to the xbox.
2) The new AirPort Express 802.11n model does have a feature called Proxy STA which should allow it to receive a wireless signal from any wireless router and allow the ethernet port to be enabled.
Message was edited by: Bob Timmons

HT4628 I recently transferred my internet service to another state. Have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the i

I recently transferred my internet service to another state.I have not yet moved my imac, just my pc laptop. I cannot get my airport extreme wireless router to work. The green light stays lit when everything is connected but I can't connect to the internet. Any suggestions?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

I have an Airport Extreme wireless router & I can not connect my Kindle.

I have an Airport Extreme wireless router & I can not connect my Kindle. Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet. It says the password is incorrect. I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly. I see no tab to create a guest network. I do not mind giving my password to visitors, but that does not work.

If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

Re : Apple TV doesn't connect to a Wi-Fi Broadband Internet Service using Airport Extreme

Hi, using Airport Extreme (Airport Utility version 6.3.2, Internet :DHCP, Router mode : Off (Bridge)) with a Wi-Fi Broadband Internet service. My Desktop (iMac), Macbook,iPhone,iPad join the Airport Extreme Wirelessi network (WPA/WPA2 Personal) easily and Broadband ISP Login-page pops up with username & password options. However, in case of Apple TV (2nd Generation Software : 6.0.2 (6646.81.1)), it connects the Airport Extreme W-Fi network easily but no Broadband ISP Login-page pops up with username & password options. Even using the Ethernet connection of the said Wi-Fi Broadband Internet Service directly to the Apple TV, no internet network connects. Please help.

There is no way you can handle login details with the ATV and there is probably no way you can do it with extreme in router mode either.. If you need to use a login name and password via a html screen then that is impossible in a device without html.
But your newest addition confuses me.
A slight correction in the question : the Broadband Internet Service isn't Wireless, but having Ethernet connection to the Airport Extreme.
So how do your iphones pop up a login page.
easily and Broadband ISP Login-page pops up with username & password options.
The alternative method is to use a computer .. login to your service and use ICS through the computer to the ATV..
See http://www.youtube.com/watch?v=0jJe_BkQMRc
Or any site that shows how to route internet through a computer.

I have a new Panasonic TV with wireless capabilities. When I connect via my AirPort Extreme to Netflix connection is lost after about 5 minutes. How to rectify.

I have a new Panasonic TV with wireless capabilities. When I connect via my AirPort Extreme and access Netflix the connection is lost after about 5 minutes. I have moved the AirPort, shut down all other computers that use AirPort for wireless connection. How to rectify?

Andrea Z. wrote:
I have lost my iPhone on August 27, 2013 at 6:15 a.m. when I posizioned it on the strip for the scanner objet of Linate Airport.
After about 10 minutes when I was already on the plane my friend tried to call my number but the phone was already off.
By searching with the "Find my iPhone" system, the device is OFFLINE and does not appear on the map.
I have already written to the lost property office of the Linate Airport but at the moment they do noto have yet responded.
I have already forwarded the complaint to the police.
How can I find out it if my iPhone 5 is offline?
Thanks in advance for the answer.
Andrea Z.
29/08/2013

I am trying to connect to directv using airport extreme

I am having great difficulty connecting my directv wirelsss connection device to my apple airport extreme. the directv wireless device will not accept my security code. I had the directv technician over for 3 hours and we could not solve the problem. Help!!!

DirecTV wireless capabilities are quite limited for a modern product
Make sure that the name of your AirPort Extreme wireless network contains no apostrophes, exclamation marks, asterisks, dollar signs, etc. Use only regular lettters and numbers.
For example, if the name of your wireless network is
kikuum's wireless network
DirecTV will never be able to connect. Change the name to something with only letters and numbers, no spaces, and no more than 20 characters. So, for example you could use something like
kikuumwireless
You may also need to lower the security setting on your AirPort Extreme router from the default WPA2 Personal to WPA/WPA2 Personal
Open AirPort Utility, click on the AirPort Extreme icon and click Edit
Then click on the Wireless tab at the top of the window to access the settings page
Click Update at the lower right to save your new settings

Can't connect 2nd airport extreme wirelessly to airport extreme base station

I have an Airport Extreme base station connected to my cable modem. I have a 2nd Extreme I am trying to connect wirelessly to the base station to extend my network. The Airport Utility does not see the second AE. Also the status light on the 2nd AE is flashing amber. I have tried hard resets and the Utility will not find it.

OK, thanks for the information.
I'm not sure if this has anything to do with your issue or not, but according to Apple, a Windows PC cannot be used to configure the newer models of the AirPort Extreme correctly. Here is what the Specifications page for the new AirPort Extreme indicates:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
http://www.apple.com/airport-extreme/specs/
I don't have a PC here to test out the setup.
We can try to configure the 2nd Extreme to extend the 1st, but if that is not successful....and you used the PC to configure the 1st Extreme....it may be necessary to start all over again and reconfigure the 1st Extreme using recommended software before the 2nd Extreme can be set up.
For now, temporarily move the 2nd Extreme to the same room or close proximity to the 1st Extreme. Power up the 2nd Extreme for a few minutes, then hold in the reset button on the device for 8-10 seconds and release. Allow a full minute for the 2nd Extreme to restart to a slow, blinking amber light.
On the home screen for an iPhone or iPad.....
Tap Settings
Tap Wi-Fi
Look for an option to Setup a New AirPort Base Station
Tap on AirPort Exteme just below that option
The utility will open up and take a minute to analyze the network, then suggest that the 2nd Extreme will be configure to extend the 1st Extreme. Enter a device name that you want to use for the 2nd Exteme and tap Next.
The utility will configure everything for you. When you see the message of Setup Complete, click Done.
Now move the 2nd Exteme approximately half way between the 1st Extreme and the area that needs more wireless signal coverage and try things out. Extending this way using wireless will usually result in a loss of about half of the potential network speed, but that is not avoidable with a wireless method.

Using Airport Extreme wireless to connect wired devices

Similar Messages

Maybe you are looking for