Using Airport Extreme with a Airport Time Capsule to update Blu-Ray player

I was wondering if it were possible to hook up a blu-ray player to a second Airport Extreme to update the player? I have a Time Capsule in my home office and a blu-ray on the other end of the house. The blu-ray needs updates. I am wondering if I can use an Airport Extreme as an "extension" wireless unit hooked up to my blu-ray player to have it connected to the net?
Thank you!
John

Welcome to the discussions, John!
You have a few options to do what you want.
Perhaps you were thinking of the AirPort Express when you mentioned AirPort Extreme. The AirPort Express can be configured to "extend" the main wireless network created by the Time Capsule and the ethernet port will be "live" so that you could connect to your BluRay player via ethernet.
An AirPort Extreme would work as well, but you may not need the other extra ethernet ports on the Extreme and extra expense for features that you may not use.
I take it that running an ethernet cable to the BluRay player is not feasible in your current situation.
You may not have thought about the next option, which would make use of a pair ethernet powerline adapters. One device plugs into an AC socket at the head end and another plugs into AC at the BluRay end. The adapters use the wiring in your home to transmit the ethernet signal. You would run a short ethernet cable from one of the LAN ports on your AirPort Extreme to the adapter and do the same at the BluRay end.
This type of connection will almost always provide a faster signal than wireless, so you may want to check these out as an option. Best Buy will have several to choose from.

Similar Messages

Time capsules and samsung blue ray player

i am trying to connect my samsung c6500 to time capsule and it reference some gateway ping issues. any clues what to do?

Are you trying to connect with wireless or ethernet?
Does the TC have a windows compatible setup.. ?
this means using names for everything in the TC that comply to windows network standards..
Short.. 2-20 characters
No spaces
Pure alphanumeric.
For everything that the Samsung is going to see. But it is better to apply it to everything.
It can be a help to set windows workgroup as well but you won't see such thing unless you use the 5.6 or earlier utility.

How do i connect my airport extreme with my airport express

how do i link my Airport Express with my Airport Extreme?

Hello Bob -
I have an Apple Extreme (5th Gen) and I have tried to extend my network with an Apple Express Model No. A1264 with the ethernet connection. It does not seem to work, and has crashed my network twice. When I did get it to work, the wireless crawled. When I took the AirPort Express off of the network the speed went back up.
Can this be done to extend the network, as I have the Extreme in the basement where the cable comes into the house, and I have two other floors that need wireless access. Any suggestions for this older model AirPort Express?
Thanks.

Can I use a second generation Airport Extreme to extend my Time Capsule network?

I have a second generation Airport Extreme (circa 2009?) and am thinking of buying a Time Capsule. Can I use the Extreme to extend my network?

Yes. Note; however, you won't be able to extend the 802.11ac mode of the new Time Capsule. Also be aware that the 2nd generation Extreme did not provide for simultaneous dual-band operation. That would mean that you will only be able to extend either the 2.4 or 5 GHz band, not both at the same time.
... so it can work in a limited fashion.

Airport Extreme and external HDD time capsule issues

I'm going to try to provide as much information for you so that you can recommend a fix to the problem.
1. I've just become an Apple owner and also purchased Airport Extreme (AE) a Belkin USB (4 port) hub and a Seagate GoFLex, 1.8T external HDD.
2. My system:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B04
SMC Version (system): 1.69f1
Serial Number (system): XXXXXXXXXXXXXXXXXXXXX
Hardware UUID: XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Sudden Motion Sensor:
State: Enabled
3. Attached to the HUB is HP 6280 printer and the Seagate 1.8T GoFlex external HDD.
4. I did configure the AE and my internet connect is working spot on.
5. The AE recognizes the HP6280 printer and it works fine.
Here's where the problem starts:
When I open Time Machine to configure Time Capsule I cannot get the AE to add thGoFlex external HDD drive to the WiFi.
Do I have reset the AE to default setting and start all over? Is there another way to add the GoFlex to the AE so it recognizes it; then, I can run the set up program for the time machine and have wireless capability.

New2Guitar wrote:
When I open Time Machine to configure Time Capsule I cannot get the AE to add thGoFlex external HDD drive to the WiFi.
I hate to have to tell you this, but backing-up with Time Machine software via an Airport Extreme is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).
By the way, a +Time Capsule+ is a wireless router, similar to an Airport Extreme, but a bit larger and with a hard drive built-in, and Time Machine backups to it are supported. In fact, that's the main thing the Time Capsule was designed for. See: http://store.apple.com/us/product/MC344LL/A/Time-Capsule-2TB?fnode=MTY1NDA0Mg&mc o=MTMzNzU2MjI

Can i extend the range of an airport extreme with another airport extreme and use the ports on the airport extreme i used to extend the network?

That seems like a complicated question.
I have a Time Capsule (which the HD *****, but that is matter for another discussion) and want to extend the range with an Airport Extreme because I have 2 devices in one room that do not do wireless but have Ethernet ports.
The room has iffy WiFy connectivity too.
I want to know if the 3 ports on the Airport Extreme still work after configuring it as an extender rather than a router.

The thing is that I want to know if I can put the Airport Extreme at the edge of the room where the existing Base does not reach.
This will not work.
Remember, an "extending" AirPort can only extend the quality of wireless signal that it receives. For that reason, it must be located where it can receive a strong wireless signal in order to work effectively.
For example, let's say that your "main" router was on one end of the house and you want to extend the signal to reach the other end of the house. In this case, you would locate the "extending" AirPort about half way between the main router and the other side of the house.

Using an Airport Extreme with my AirPort Express as a new network?

Hello.
I am looking into buying an airport extreme as a replacement for a Netgear router that does not seem to work. I have an Aiport express already.
So let me see if I can get this straight...
I can have 6 computers (all PCs) connected (and a couple other devices like a TIVO) all connected to an airport extreme base station to the internet and 1 airport express set as a remote base station. All devices will be able to connect to the internet (3 computers plugged in via Ethernet on Airpot Extreme) and share printers/files/etc? Is there a limit to the number of computers that I can have (even if i am extending with an Airport Express?
I would appreciate any help steering me in the right direction.
Dell Laptop Windows XP

Andrew,
Yes you can do all those things.
There is a limit on the total number of connections but it is very large.
The Airport Express can be used in a number of ways.
...For music only - which is not a problem.
...Or as a wireless relay - using something called WDS. In this mode you can connect further computers to the ethernet port of the Airport Express. Or extend the wireless reach of the network.
If your ONLY use for the Express is to connect a computer, its probably better to get a wireless card for it.

I had an Airport Extreme with and Airport Express used as a extender. My Airport Extreme died, so I bought a new one and when I installed it I renamed my network.

Now my new Airport Extreme doesn't see my Airport Express. Can I fix this?

The easiest way to do this is to reset your airport express to the factory configuration/default by unplugging it and then holding down the small reset button on the back, plugging it back in. Once the amber LED begins to flash quickly you can release it. after a minute, when the amber led is flashing slowly you can bring up the latest version of the Airport utility. When it starts, it will connect you to your network and indicate that there is a new device that needs to be set up. Simply follow the prompts and answer yes when it asks if you want this new device to extend your network.. It will then do all of the configuring for you.
Pretty cool.. I just got a new Airport Express and it installed perfectly the first time. If you have problems post back.

CAN"T EXTEND RANGE OF NEW AIRPORT EXTREME WITH OLD AIRPORT EXPRESS

Hello Everyone,
I am having a heck of a time getting my new network setup with this new 802.11n Airport Extreme... Here is what I currently have going on:
I have a G5 1.8 it is my main computer and in ROOM #1... Connected to it is my NEW AIRPORT EXTREME via an Ethernet cable to one of the available ports. Also connected to the NEW AIRPORT EXTREME is my CABLE MODEM... This works great, It is setup and I have internet via Ethernet... I CAN EVEN CONNECT IN ROOM #2 with a PC and an Apacer wireless adapter...
Here is the problem
When I try to add an Airport Express V6.3 to extended the range of my network it can NEVER seem to connect to the network. I have checked the option to allow extension of the NEW AIRPORT in AIRPORT UTILITY and tried both with WEP security and with NO SECURITY... I cannot get the Express to extend the range of my network period... It has an error when joining the network???
Can Anyone Please Help Me?
PS. The reason to extend the network is so I can use the Notebooks in ROOM #3 and so a TIVO can see the Network! It is not far away!
G5 1.8 (2003) Mac OS X (10.4.8)

Also am having problems with my roomates HP Laptop... It connects for only a few seconds/minutes then has an issue... Really shady??? Any Ideas? He is Running Windows XP
G5 1.8 (2003) Mac OS X (10.4.8)

Set up Airport Extreme with 2 Airport Express connected by CAT5??

I recently bought an Airport Extreme base station and an Airport Express. My plan was to use to Airtunes with my AV receiver in my basement. Unfortunately, because the distance between these two areas is long (and separated by two floors) I'm not able to get a strong enough signal with the Airport Express to use Airtunes. I bought another Airport Express to put on the middle floor of our house but the signal in the basement was still not strong enough even with this addition.
I do have a way of connecting the middle floor of our house with the basement area by a CAT5 ethernet cable. My plan now is to connect the two Airport Express modules by their ethernet ports with this cable. The Airport Express on the middle floor connects with the Airport Extreme base station wirelessly without any problems. My question is what is the proper setup for the 2nd Airport Express connected by ethernet in my basement.
Airport Tech support said this could be done. They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station. This setup actually works for several hours but then the Airport Express module that is connected to the Airport Extreme blinks amber. Interestingly the 2nd Airport Express with usually remain with the green light on.
Does anyone have any suggestions for the best way to set this up regarding network configuration with the Airport Utility?
Thanks

wmskaggs, Welcome to the discussion area!
They recommended setting up a new wireless network with the 2nd Airport Express by "fooling" into thinking it was connected directly to the router but using the same network name with a different wireless channel as my Airport Extreme base station.
That will work with as long as the AirPort Express (AX) is connected via Ethernet. The only other setting you need to make is to configure it to act as a bridge (not sharing a single IP address).
If this one looses connection, then something is wrong with the AX or the Ethernet connection (cable and/or connectors).

Can I extend the range of my Airport Extreme with 2 Airport Express units?

I am using Airport Extreme as my basic router. I have connected 2 airport express units (all new since 12/09) to extend the network about 300 ft into another building to a PC. I am receiving about 65% signal and only one of the express units is extending the signal. Previously I was able to extend the network with a Netgear router and one D-Link extender and achieved 85%.
I would like to use the 2nd express to extend the signal of the 1st express which is extending the Extreme.
If this is not possible, can I use something other than an express with the extreme to extend the wireless network?

Here are the basic steps in setting up a static WDS. Please compare them to what you have done to see if there are any differences. Hopefully, this will give you a clue on what to try.
AEBSn - WDS Setup
(Note: To facilitate the WDS set up, place the base stations within near proximity of each other during the set up phase, and then relocate them to their desired locations when complete. Also, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and choose Manual Setup from the Base
Station menu, or double-click the base station to open the configuration in a separate window.
o Enter the base station password if necessary. If the base station is using the
default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the remote base station, and choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
Relay Base Station Setup
o Click the AirPort status menu in the menu bar to join the wireless network created by the base station you want to set up as the relay base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the relay base station, and choose Manual Setup from the Base Station menu.
o If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS relay” from the WDS Mode pop-up menu.
o Enter the AirPort ID of the main base station in the Main AirPort ID field.
o Click the Add "+" button and enter the AirPort ID of the remote base station this relay base station will connect to.
o Click Update to transfer the new WDS settings to the relay and remote base stations.
(ref: Pages 42-46 of "Designing AirPort Networks.)

Airport Extreme with Two Airport Express Stations

Alright... It's been a while since I turned to the community for help, but here I go.
I've got an Airport Extreme Base Station (Dual Band) purchased a little over 1 year ago. I also have two Airport Express Base Stations (Let's call them AX 1 and AX 2 for short) purchased in the last 6 months. I am trying to configure everything as follows. Wireless signal originates from AEBS in one corner of the house, gets picked up by AX 1 downstairs, and then broadcast to AX 2 upstairs which in turn broadcasts the network to our computers upstairs. Instead what is happening is that it goes AEBS > AX 1 and then AX 2 acts as a client only to AX 1 and will not extend the signal any further. I've been trying to use the default "Extend a network" option, avoiding the WDS setup because i've read that WDS will drop everything to 802.11g instead of 802.11n. Is this true?
Signal in the house is fairly poor and I can't move the AEBS from where it is due to wiring constraints with the cable modem.
Any help would be appreaciated! I'm just trying to get decent 802.11n coverage throughout all the house :/

Christopher Sant wrote:
I've got an Airport Extreme Base Station (Dual Band) purchased a little over 1 year ago. I also have two Airport Express Base Stations (Let's call them AX 1 and AX 2 for short) purchased in the last 6 months. I am trying to configure everything as follows. Wireless signal originates from AEBS in one corner of the house, gets picked up by AX 1 downstairs, and then broadcast to AX 2 upstairs which in turn broadcasts the network to our computers upstairs. Instead what is happening is that it goes AEBS > AX 1 and then AX 2 acts as a client only to AX 1 and will not extend the signal any further.
I believe that "extending" a network can only use one "hop", so that you can't have AX 2 extend the network from AX 1. WDS would allow you to have one AX as a "relay" and the other as a "remote", but as you mention, there's a performance penalty for that.
Signal in the house is fairly poor and I can't move the AEBS from where it is due to wiring constraints with the cable modem.
That may actually be your best option. Consider using PowerLine devices to "extend" the Ethernet connection between your broadband modem and your AEBS:
http://computer.howstuffworks.com/power-network.htm
Then put the AEBS near the center of your house and if needed, configure each AX to extend the network from the AEBS.

Older Airport Extreme with new Airport Express

I have a new Airport Express and an older Airport Extreme (I think 1rst gen). I have been using the Extreme for a few years now and just got the express to help me extend the extreme. The Extreme's signal is very weak in some parts of my house. I cannot hook the two together via ethernet. Needs to be wireless. What's the best method? I only use the wi-fi for internet access and tv (netflix, HBOGO, etc). I do not share printers or hard drives. I'm wondering if the new express is better (range) than my older extreme? Should I use the express as my main base station?

Your Extreme should still provide better overall range over the 2nd gen 802.11n AirPort Express Base Station, so I would still recommend that you leave the Extreme as your "main" router.
You will want to use the following instructions to extend the wireless network from this Apple Support article.
The key to success if extending the Extreme is to place the Express within a 25+ dB SNR range of the Extreme as it can only repeat the signal with the same bandwidth that it receives it. If the signal is very weak the Express may not even be able to extend it at all.
Check out the following AirPort User tip for details on optimal base station placement. Please post back your results.

I cannot reach my Airport Extreme with the Airport Utility.

I used to have my Airport Extreme as a LAN Switch and I had an USB-2TB-Disk plugged.
Now I wanted to use my APE as an extension to my WLAN, so I choosed my APE in the Airport Utility and wanted to set it to its default settings.
After that I'm not able to reach my APE again. Always I choose in the Utility the APE by «Other Airport-Basicstations...» it ends to an error. :-/
Can anyone help me pls?

Acually I don't know how I fixed the problem, but I was able to make the settings by my iPhone 4s.
After several restarts by press the reset-button of the APE.

Airport Express as a bridge for a Panasonic BD35 Blue Ray Player

Just put in Crank 2 and it will not play, discovered this problem is due to the coding on the BR disc that is looking for an internet connection and if one is not available the disc plays in a distorted mode.
I have connected an ethernet cable from my co-located Airport Express (that is hooked into the stereo to play streaming audio from laptop) to the Panasonic BD35. On the BD35 network set up I can not get it to hook up.....the connection test fails every time.
Any one have any experience with Panasonic issues of connectivity? My issue is with getting the BD35 to recognize the internet hook-up. Thank you for your time....

Welcome to the discussions!
Can you turn off the wireless temporarily on a laptop and plug into the AirPort Express to see if you can get an internet connection?
If you have a newer AirPort Express"n" and "enabled ethernet clients" during setup, you should connect.
If your AirPort Express is 2+ years old, you will not have the ethernet functionality on the older "b/g" Express. What main router are you using?

Using Airport Extreme with a Airport Time Capsule to update Blu-Ray player

Similar Messages

Maybe you are looking for