Using Airport Time Capsule as target/workplace for a Data Rescue III type software

I need to recover data from a 'bad' disk on a Macbook anno 2007. My idea is to mount the drive on a Macbook Air using target disk mode and a thunderbolt/Firewire connection. The mounting goes fine but copying the data leads to a hanging Mac Air. So now I put all hope on a Data Rescue type software in that such software will circumvent the hanging issue! Problem is that the Mac Air don't have enough memory to store the hopefully recovered data. Essentially, I have no proper 'target disk' for the recovered data and need to buy one (as well as buying the rescue/recovery software).
So, can I use a Airport Time Capsule as target/workplace for a Data Rescue type software on my Mac Air? Is this a proper mountable hard drive?
Thanks,
RA

No, it is better to get a USB drive. You can mount a TC drive but it is just as likely to unmount itself half way through.. keep networks out of the already many problems you have.

Similar Messages

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

    how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • Does the airport time capsule eliminate the need for my cisco linksys wireless router?

    does the airport time capsule eliminate the need for my cisco linksys wireless router?

    I understand that your network now looks like this:
    Modem > Security Router > Cisco/Linksys router > Devices
    If you do not want to use the Cisco/Linksys router and use a Time Capsule instead, then your network would look like this:
    Modem > Security Router > Time Capsule > Devices

  • Can I use airport time capsule with a hotspot network?

    Can I use airport time capsule with a hotspot network?

    Can I use airport time capsule with a hotspot network?
    Very very poorly..
    It can join a wireless network..
    See instructions here.
    https://discussions.apple.com/thread/5719954?tstart=0
    End result is super slow wireless connection to the TC and all packets pass through the hotspot so expect internet to drop to nothing while you are backing up.

  • How to use airport time capsule with multiple computers?

    I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
    I bought the AirPort Time Capsule to back up my MBP
    And so i did.
    then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
    I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
    Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails.  It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
    this is what i want:
    i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
    i want to make a new back up of my MBP as if it's a second computer...
    so guys and girls, what is the easiest and best solution?
    Best regards!

    TM does not work like that.
    If you want files to use later.. do not use TM.
    Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
    Read some details of how TM works so you understand what it will do.
    http://pondini.org/TM/Works.html
    Use a clone or different software for a permanent backup.
    http://pondini.org/TM/Clones.html
    How to use TC
    http://pondini.org/TM/Time_Capsule.html
    This is helpful.. particularly Q3.
    Why you don't want to use TM.
    Q20 here. http://pondini.org/TM/FAQ.html

  • How to use Airport Time Capsule as a wireless hard drive?

    I have purchased the Airport Time Capsule 3TB but I really don't need a backup disk, so I want to use it as a wireless hard disk to be used in my network, how can I do this?  Can someone give me a clear step by step guide of how I can do this?
    I appreciate your help and support.

    There is no difference between using the TC as a backup or as a network disk.
    Mount the disk in finder.
    Copy files to it and from it.. in exactly the same way you copy files between disks in a Mac.
    As a file store the TC is not good.
    Store files on the TC.
    https://discussions.apple.com/message/24380694#24380694
    This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
    The TC is not suitable for network file server.. but many people having no choice press it into service as such.
    It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
    Major issues.
    1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
    2. The TC cannot be partitioned and mixing TM backups and data is not great.
    3. The drive is slow to spin up and quick to spin down.. there is no controls.
    4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
    5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
    6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
    7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
    Read pondini for some work arounds.
    Q3 here. http://pondini.org/TM/Time_Capsule.html

  • Using airport time capsule to create an internet connected network from pre existing wifi network

    i bought an airport time capsule for college. I bought it to create a network for my dorm room so that I could take the pre existing wifi from the school and make my own mini network that I can hook my other stuff up to. Problem is that I don't have an ethernet hook up in my room so the network would have to be created from a wifi network rather that a ethernet hook up. Is this still possible? Alternate suggestions? I am afraid of either the college network blocking users from communication with other devices via the wifi, or the fact that my printer would be on a huge network for all to screw with.

    Is this still possible?
    NO, it won't work. Apple only works with apple.
    Alternate suggestions?
    I am sure your college has rules about not running your own wifi networks.. but anyway.. that is up to you.. the Apple TC cannot turn off 2.4ghz which would be handy.. so the only way to do this following the rules is ethernet. You can run a full network standalone on ethernet. And still use wireless for internet.
    If you want to use wireless standalone this is also possible but you need to connect a second wifi USB dongle your Mac so you can have two networks at once.. You can use an express to connect to the college wireless and bridge that to the TC by ethernet.. then use the TC to create your own network.. since you cannot turn off 2.4ghz I guess how long the College IT people take to track you down should be hours. If you could just use 5ghz it would probably be ok.

  • Using Airport Time Capsule with an external usb hard drive - how to connect

    I have 2TB Airport Time capsule which is connected to my iMac by an ethernet cable and which I use for T.Machine backups - No problems here.
    I have an old MacBook Pro running 10.6.8  and which is also connected to my T/C via wi-fi - again no problems.
    But I understand I can use an external hard drive via usb cable connected via a powered hub, to the T/Capsule and which I wish to do certain backups from my MBP (I have no wish to update the MBP as it runs certain apps no longer available on the iMac (10.9.2)
    Now the problem I have is trying to set it up,  the MBP has Airport Utility 5.6.1 and I can’t continue as it says I need a newer version. As I see it,  the newer version doesn’t work on the MBP only  the iMac.
    A catch 22 situation. If I continue and and go to “manual setup” then try  update, all I get is “correct the problem before updating”  (Allow setup over the internet using Bonjour).
    Anyone have any ideas or images that I can view to try and get things going?
    I should add that I wish to use my external hard drive not as a time machine backup but only for certain items using say, Super Duper, but am unable to get the disk to mount on the MBP
    Alan

    I still can't use it the way I was hoping because it then becomes a T/M back-up disk and not a normal usb/firewire disc.
    You are first mounting the drive on the desktop, correct?
    Not sure what you mean here.
    You can drag/drop files normally or copy/paste files to the drive icon on the desktop, just as you would a normal drive that is displayed on the desktop.
    Or, double click the drive icon on the desktop and drag/drop files into the open window there.
    Tell us the steps that you are using to mount the drive on the desktop. What happens after each step?

  • Using AirPort Time Capsule as an external drive with access to files by guest account

    Is it possible to use my AirPort Time Capsule as an external drive with access to files by a guest account?
    I would like to store a large number of folders containg photographs on my AirPort Time Capsule and allow anyone with a password to access the photographs - at the time of viewing the Time Capsule would be connected to the internet but I wouldn't want users to actually access anything other than the files on the Time Capsule - is this possible?  if so any help in configuring it would be really helpful.

    No it is not possible.. Guest is just that.. a guest that is allowed permission to access the internet but none of the local files.
    To give a person access to the TC they must have password to access your normal network..
    From there it is up to you how you do this.. people cannot actually access files on your computers unless you give them share and password permissions for that.. you can even setup accounts on the TC although I recommend against it.. if you want shared photos anyway. All security on a TC is illusion.. merely pressing the reset and it is all blown away.. so if you are concerned about security don't put stuff on the TC people should not access.. or like your TM backups ensure they are encrypted.
    A person can then access you TC and the photos.. but what else on the network??

  • Using Airport Time Capsule with CenturyLink C1000Z

    I just received an Apple Airport Time Capsule (3Tb) for Christmas and want to use it as our home wi-fi.  Up until now, we have been using the wi-fi which is supplied by our DSL carrier (CenturyLink) through the C1000Z router/dsl modem combo they supplied when we started service with them.
    Here's how I have it set up:
    1) Wall to CenturyLink C1000Z
    2) CenturyLink C1000Z to Apple Airport Time Capsule 3Tb
    3) Apple Airport Time Capsule 3Tb to iMac (direct Ethernet connection)
    I plugged everything in as described above and everything "seems" to be working.  My question is:
    Do I need to configure anything special in either the Airport TimeCapsule or the CenturyLink C1000Z to make this setup work better?
    When I go into the Airport Utility and select "Network" the Router Mode shows "Off (Bridge Mode)", with Network Options showing "Block incoming IPv6 connections" and "Allow incoming IPSec authentication" checked by default.  The internet tab shows connection using DHCP, with Internet Options configuring IPv6 automatically using IPv6 Native mode, with "Enable IPv6 Connection Sharing" checked.
    I've read in some sites that I need to configure the CenturyLink C1000Z in a special way, or my internet speeds will be negatively affected by this setup.  Can someone please assist?  CenturyLink tech support was of absolutely no assistance in this area, even unwilling to try.  Thanks for your help--I look forward to the education!

    There is nothing wrong with the setup. ADSL is never that fast.. Do the speed tests and see. Plug straight into the modem and do a speedtest.. then plug into the TC and do the test..
    Is the Mac not getting full speed?
    What makes you think your losing something?
    No ISP can help with home network.. I can understand their reluctance to get involved.. that is the case anywhere and everywhere. Home networking can go from simple to complex in the extreme very quickly.
    The most important part of this setup to your original specs is not mentioned.
    I just received an Apple Airport Time Capsule (3Tb) for Christmas and want to use it as our home wi-fi.
    To use it as your home wifi, it is essential that you create a wireless network in the TC.. there is no need to turn off the wifi in the Century modem router although doing so is probably a good idea if the two are sitting right next to each other.
    Otherwise tell us what issues you are having.

  • How to use AirPort Time Capsule 2TB as an external storage hard drive only?

    I have a new AirPort Time Capsule 3TB, now I want to use my AirPort Time Capsule 2TB as an external storage hard drive only, how do I it? 
    I would like to  connect the AirPort Time Capsule 2TB directly to my Mac Pro. using OS X 10.7.5.
    I have erase disk and reset the 2TB to factory default, after that, I cannot make it to connect to my Mac.  Please help.

    The 2TB Time Capsule needs to connect to your 3TB Time Capsule using a wired Ethernet connection.
    Connect from a LAN <--> port on the 3 TB Time Capsule to the WAN "O" port on the 2 TB Time Capsule and configure the 2TB Time Capsule in Bridge Mode and turn off the wireless function on the device as well.
    Once that is done, you can connect your Mac directly to the 2TB Time Capsule using another Ethernet cable, or your Mac can connect to the network using the normal wireless network, if you prefer.

  • I have a MacBook Pro 13" and am using Airport Time Capsule and iCloud. I delete my cookies all the time, but every so often the cookies reappear after rebooting. It is the exact same amount of cookies each time, so I wonder why they're being reloaded?

    I have a MacBook Pro 13" (2010) running OS X 10.9.2   and have Airport Time Capsule. I routinely delete my cookies and often (every couple days or so) when I reboot, a number of cookies reappear in my Safari settings. The number of cookies that reappear is exactly the same when it does it (351 cookies) so I'm wondering if it is related to my Airport Time Capsule or possibly iCloud? How do the cookies get back into my MacBook Pro? Or.... Have they ever actually left? Befoer I reboot, I delete them and sometimes they stay gone for 24hrs or more, but then reappear the next time I reboot. Can someone tell me if there is a way to clear the cookies so they won't come back?

    Blocking all cookies in Safari does not work. Deleted cookies will not stay deleted. There are numerous threads on this going back years, both in these forums and elsewhere. Many claim to have submitted the issue to Apple, but I have never seen anyone post a reply.
    I have seen many suggested fixes that involve finding the cookies file, some including Terminal manipulations, and none seems to work universally. I can find noplace where Apple addresses this officially with an actual Apple-approved explanation or how-to.
    Bottom line, your browser's security features should do what they claim: delete cookies. When they come back without ever even visiting another page, this is clearly not working in the way a reasonable user would expect.
    Bottom line, Safari does not protect users' privacy in the way it pretends to and, after so many years of this issue, it appears that Apple wants it this way.
    Having spent way too much time on this, I realize the choice is between Safari which is pretty well optimized; Firefox which is a lot pokier, at least for me; and Chrome, which I assume funnels personal information directly to Google.

  • MacBook Pro loses connection to Internet after sleep using Airport Time Capsule

    I recently upgraded to Mavricks and then added a new Airport Time Capsule, and now I my MBP will not connect to the wireless LAN after waking up from sleep mode.  My MBP worked great for over a year with an non-Apple router, so I am thinking that there is a new Apple computer-to-Apple Router issue going on. Any thoughts, suggestions?
    I read all the threads and have followed all the simple advice, such as making sure the Airport is at the top of the network priority list, etc, to no avail.  I end up having to reboot my MBP to get reconnected, which is super frustrating.
    MacBook Pro 17" (late 2011)
    OSX v 10.8.5
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,3
      Processor Name:          Intel Core i7
      Processor Speed:          2.4 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
      Memory:          8 GB
      Boot ROM Version:          MBP81.0047.B27
      SMC Version (system):          1.70f6
      Serial Number (system):          C02HH142DV10
      Hardware UUID:          C6AC7046-2B2B-5DE5-BE83-447EAE22E250
      Sudden Motion Sensor:
      State:          Enabled
    Network
    Software Versions:
      CoreWLAN:          3.4 (340.18)
      CoreWLANKit:          2.0.2 (202.11)
      Menu Extra:          8.1 (810.11)
      configd plug-in:          8.5 (850.252)
      System Information:          8.3 (830.5)
      IO80211 Family:          5.3 (530.5)
      Diagnostics:          2.1 (210.25)
      AirPort Utility:          6.3.1 (631.4)
      Interfaces:
    en1:
      Card Type:          AirPort Extreme  (0x14E4, 0xD6)
      Firmware Version:          Broadcom BCM43xx 1.0 (5.106.98.100.17)
      MAC Address:          10:40:f3:b1:49:36
      Locale:          FCC
      Country Code:          US
      Supported PHY Modes:          802.11 a/b/g/n
      Supported Channels:          1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
      Wake On Wireless:          Supported
      AirDrop:          Supported
      Status:          Connected

    Hello ghesser,
    Thank you for the details of the issue you are experiencing with Wi-Fi on your MacBook Pro after setting up your Time Capsule.  I would be concerned about this too.
    I recommed reviewing the full article and specifically the section labeled, "Symptom: The network connection drops unexpectedly" in the following article to resolve an issue like the one you described:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Thank you for posting in the Apple Support Community.
    Best,
    Sheila M.

  • Synch macbook and iMac using airport time capsule

    I have macbook pro and iMac. I connected both of them to the airport time capsule and everything is going ok. My question is: Can I enter the backup of iMac from the macbook pro and vice versa? I want to easily synchronise both machines

    I don't think after an initial migration this is going to work very well.
    Do a search for ways to synch your machines.
    icloud or dropbox.. https://discussions.apple.com/thread/5165314
    http://gigaom.com/2013/05/28/keeping-a-dual-mac-lifestyle-in-sync/
    FoldersSynchronizer.. http://www.softobe.com/folderssynchronizer.html

Maybe you are looking for

  • Error execute report in R12

    Hi all, I think I better change this question into a sharing because I'd solved my problem :p. Below is my first post in this thread before I found the solution : I hoped I put this in the right forum. Before I ask the question, here are my environme

  • What is the different between old and new succession planning?

    Hi I have worked a lot on succession planning in 4.6c. In ECC 6.0, the succession planning has shifted to e-recruitment section. 1. What is the difference between succession planning in 4.6C and ECC 6.0 2. Can I still use the old succession planning

  • Map problem with ios6

    I have problem with IOS6 Maps is any one knows to downgrade to old IOS5 Maps

  • RABAX_STATE  error after loggin into BBPSTART service in SRM 4.

    While logging into one of the services(BBPSTART) in SRM 4.0 (WebAS 6.40) we get the following error... "Error when processing your request What has happened? The URL http://bg3sapc.bdc3bproj.co.in:8000/sap/bc/gui/sap/its/bbpstart was not called due t

  • Can the system password be suppressed?

    I am starting admin and managed server using WLS6.1 on Solaris. The java process that runs the server lists all of the arugments, including -Dweblogic.management.password=<password>. My company sees this as a security risk. Is there a way to suppress