Using Airport via Ethernet then dial-up airport...?
Okay, so I know I'm not crazy. Ages ago I helped my father set up his Airport (Snow) to his DSL. During that setup process I remember having the option, in the airport admin utility, to use that airport for dialing up abroad...
In other words (I dont know how best to articulate this).... I could plug a phone line into the airport (which was already connected to broadband) and go anywhere else in the world with my lap top and dial up to the phone number which was plugged into the modem port of the airport. The airport would take its connection via ethernet and broadcast it via dial-up to me anywhere in the world. Therefore it was kind of like using my airport as a mini dial-up ISP.
Am I crazy for remembering this...? It was a while ago, but I have recently seen this as being a handy tool for me. My cell phone has bluetooth and so does my macbook pro. It would be really cool to be able to dial up to the old graphite airport im using to do the same thing anywhere i go... Are there only certain airports that can do this?
If anyone has any ideas it would be greatly appreciated...
Thanks a bunch,
Joe Montana
You memory is correct - this was a feature available on older model Airport Base Stations that had a built in dialup modem. However, none of the "Airport Extreme Base Station 802.11n" models now being sold have a built in dialup modem. The last Airport Extreme Base Station model to have a built in dialup modem was part number M8799LL/A - you can still find new but old stock of this model from retailers other than Apple.
Similar Messages
-
Sync via ethernet then set up through wifi?
Loading content on Apple tv seems to take so much time over wifi. Can I connect Apple tv to my network via ethernet in one room and load content on it (will it be faster with ethernet?) and then move the unit to another room with the tv I'm going to use and then set up wifi to sync and stream content as it is added to my iTunes library? Does it work like this?
Yes, quite a few people do this, however be aware that a couple of people have reported that the tv will not start up without being connected to a tv.
-
Connect to Airport Express to use AirTunes via ethernet cable?
Hi,
Here's my setup and question: I am connected to the internet using the wireless network in my house. I want to also connect my computer to my Airport Express for AirTunes which is hooked up to my stereo in the computer room. Since I'm already connected to a different wireless network for internet, can I connect my Airport Express directly to my computer using an ethernet cable in order to run AirTunes?
Thanks!Hi.
You don't need to do that. You can simply set the express up as a "client" allowing you to be on the network and/or airtunes and/or wireless printing.
Have a look at this post for the relevant info:
http://discussions.apple.com/message.jspa?messageID=5578616#5578616
--- -
Not experianced in networking. Current working setup is wireless network with airport extreme. Having problems with signal so may need to expand network with another airport. My house has a wired ethernet to most rooms. What is the best approach to maintain wireless network and also use ethernet wired connections where convienient?
I now wish to add a second Airport extreme but am considering a hard wire connection with 100 ft of cat 6 cable from the Time capsule to the second Airport extreme.
Excellent plan.
Can my network operate properly to extend the network with both a wireless and wired extend functionallity?
Yes, but don't get confused about the second AirPort Extreme, as it would not be configured to "extend" a wireless network.....it would be configured to "create a wireless network" using the same wireless network name, security settings and password as the Time Capsule network. Configure the second Extreme in Bridge Mode.
This Apple support document will show you how to hookup and configure the second AirPort Extreme:
http://support.apple.com/kb/HT4260 -
Airport Extreme Base Station to Express via Ethernet?
I have both a new Extreme (n) and Express (n) and am trying to set up a network between two buildings. I have been successful with the wireless network, yet the wireless signal between buildings is not strong enough for streaming video. The current configuration is the Extreme in one building connected to the cable modem. This is where the strongest signal is found. The express is in the main house and the signal is much weaker.
My question: If I run an ethernet wire from one building to the next, can I connect these two Airport devices via ethernet to strengthen the signal? How would I configure this in the Airport Utility?
I made an attempt to plug the ethernet into both and the Utility stopped seeing either device and I lost the internet connection.
I may not understand the way these devices communicate with each other. If anyone can point me in the direction of a solution I would be grateful. My goal is to have a signal strength strong enough to stream Netflix videos in the house with the Express. I am thinking that if the Express is wired to the base station via ethernet then the wireless signal from the Express would be sufficient to stream wirelessly to a new Macbook... Possible?
Thanks for any suggestions.A couple of questions. First, at AirPort>Wireless>Wireless Mode should the selection be "Join a wireless network" or "Off"? I currently have Join a the wireless network selected.
For both base stations, Wireless Mode = Create a wireless network.
When I am at Internet>Internet Connection the screen is muted, which means I can't change anything. The two items on the page say "Connect Using: Wireless Network" and " "Connection Sharing: Off (Bridge Mode)" - as you mentioned. This is correct, right?
For both AirPorts, Connect Using = Ethernet; For the AEBSn, Connection Sharing = Share a public IP address; For the AXn, Connection Sharing = Off (Bridge Mode)
The Extreme (connected to modem) and Express (ethernet cable will connect to port on Extreme) have different names. And each is configured to participate in the same network.
Both would be correct. -
Airport Extreme + My Book World Edition via Ethernet?
Hi,
Simple question - if i bought a Western Digital My Book World edition which has an Ethernet out port - could i connect it to the Airport Extreme to share with all my devices?
If so would it have any advanced over buying the cheap(ist) Western Digital and connecting just by USB?
ThanksIf that drive is usable by your devices when connected directly to them via Ethernet, then yes that would work.
You would be relying on the file sharing services of that drive... not the file sharing services of the AirPort Extreme base station (AEBS). -
From what I read, the only way to extend my Apple Wifi Network is via another Apple Airport Extreme or Express using overlapping wifi zones. If I try to connect my Apple Express to my Apple Extreme via Ethernet, then this is guaranteed to fail regardless of how I configure the Express. Is that correct?
It is certainly possible and better....in terms of performance.....to connect the AiPort Express to your AirPort Extreme using Ethernet to extend the network that way.
If you are having problems with this, then your setup is not correct....or....if your setup is correct, you may have a defective AirPort.
We can walk you through the steps to get things set up correctly if we can get some basic information to provide the correct settings.
What is the model number of the AirPort Extreme?
What is the model number of the AirPort Express?
if you are not sure, look on the bottom of the Extreme and side or bottom of the Expess. The model number starts with an "A" followed by four numbers.
We also need to know what operating system you are using on your computer. If you have a Mac, click the Apple icon in the upper left corner of the screen, then click About This Mac and post back with the OS X Version number that you see there.
We will likely have more questions about your current setup to understand things a bit better, so please be patient. -
Express to Broadband router via ethernet cable
I need to confirm something. I would like to purchase an Express 802.11n to set up a faster internet connection for my wife's MacBook, it can use the enabler. I have a fast FIOS internet connection (20/10). Can I connect the Express to my broadband router via an ethernet cable and will my wife see the speed difference? I have done a few speed checks and the 802.11g Airport network peaks out at about 7 mps. I expect to see her machine peak at about 15 mps if configured as a 802.11n only network. Is this about right? I would still have to suffer with the slower network, but us men do crazy things for love.
MarkIf your wife's MacBook is connected directly via Ethernet to the FiOS router does it show a connection faster than 7 Mbps? If not, changing the wireless interface isn't going to help anything.
If she does get the full 20 Mbps via Ethernet then switching to 802.11n might getter her a faster wireless data transfer. -
HT204371 Airport Express via ethernet to router, and then use Airplay?
I am having what seems like an unusually difficult time accomplishing the following:
I have an Airport Express that I wish to connect to my router using an ethernet connection. My purpose for using the AE is solely to use Airplay (using iphones, ipads) to play powered speakers.
I seem to have no problem configuring the AE to act over WIFI to achieve this task - but instead I want to have the AE connection via ethernet, and not over WIFI, because I have experienced cut-outs in playing music when the AE is connected to my existing network over WIFI and I'm hoping that the ethernet connection would eliminate this.
Can someone please post the proper settings using Airport Utility? I have Utility version 6.1.
Thanks.Sure, here you go.
Make the Express look like this:
If you also want the Express to serve as an additional access point (optional) set its Wireless Mode to "Create a wireless network" and provide the exact same Wireless Network Name and security settings as your existing router's wireless network.
Something like the following: -
Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.
Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. -
I currently have an Airport Extreme Base Station connected to my DSL router by Ethernet. Because I have a long, sprawling home, I have 3 Airport Expresses configured to "Extend the Wireless Network" I've established. Because of my home environment--thick walls encompassaing wire mesh, sprawling rooms, etc., it is hard to maintain a continuously-strong, stable WiFi signal. I've been told that I can create a much more stable network by connecting the Express units to the AEBS via Ethernet cable. Since my home is already wired for Ethernet, I'm considering making this change. If I proceed to establish the Ethernet connections, how do I then set up Airport Utility to accomodate this switch from a Wireless-based WiFi network to an Ethernet-based WiFi network?
Thanks in advance for any help.
PhyllisI don't see anyplace in the Utility to designate HOW the Express units are connected, only how they relate on the network to the Extreme,
As I mentioned in the previous post, when you click the Internet icon in AirPort Utility:
Connect Using = Ethernet (This tells each Express to connect to the Extreme using the ethernet connection)
Connection Sharing = Off (Bridge Mode) (This setting allows your AirPort Extreme to function as the "main" router on the network, as it must for the setup to work correctly.
You do not need to configure anything differently on the AirPort Extreme (as long as it is working correctly now) to connect the AirPort Express devices.
The only other question I have is the following: I'm currently already using one of the Ethernet ports on the back of the Extreme-- for my husband's iMac. I really don't think he gains much in performance over how the iMac would run through wifi, so I could disconnect the iMac. If you think the iMac would do better to stay on the Ethernet connection, should I use a switch/splitter to add an extra connection?
Since each AirPort Express must connect using ethernet, you will need to use the 3 LAN <-> ports on the AirPort Extreme for the AirPort Express devices.
I would suggest that you try connecting the iMac using wireless to see if that will work. If the wireless connection is not satisfactory, then you can add a 5 port ethernet switch to one of the LAN ports on the Extreme and then plug all the devices connecting using ethernet....the iMac and the 3 AirPort Express devices...into the remaining 4 ports on the switch. That will leave you with 2 open ports on the AirPort Extreme for any future devices that may need to connect.
When you test out the system, here is a trick to find out which device your computer is actually connecting to at any given time as it "roams" around the house.
When you have AirPort Utility open to configure each AirPort Express, jot down the AirPort ID for each Express. You can do the same for the AirPort Extreme.
As you move around with your laptop, hold down the option key on your Mac keyboard while you click on the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device that the laptop is connected to at that time. it should also be the ID of the closest AirPort Express (or AirPort Extreme if the laptop is close to the Extreme at the time).
Let us know how things are working when everything is up and running. -
As stated in title. I want to access Netflix but my TV requires ethernet connection. I would like to use Express to repeat Exreme sigal and then to TV via Ethernet. I only have one access point in house for cable modem so I'm using Extreme to broadcast though house. Will need to be able to input network key for Extreme secure network. Thank you.
MikeAre both your AirPort Extreme and AirPort Express 802.11"n" devices?
If yes, you can configure the Express to "extend a wireless network" and it will provide more wireless coverage and the Etherent port will be enabled so that you can connect an Ethernet device.
This assumes that the Express is located where it can receive a strong signal from the AirPort Extreme. -
Using airport express to extend network via ethernet socket
I have a wireless router set up which feeds my mac and tv (via a wired ethernet connection). I have also a pc which doesn't have wifi capability.
Can I use airport express to make my pc pick up the wifi by plugging the pc into the ethernet socket? I would also plug a printer (currently connected to the pc) into the usb, so it can become a shared printer.
ThanksCan I use airport express to make my pc pick up the wifi by plugging the pc into the ethernet socket?
Yes. But, it is the AirPort Express that would "pick up the wifi". Then, you would connect an Ethernet cable from the AirPort Express to the PC.
Configure the AirPort Express to "Join a wireless network" and click the option to "Enable Ethernet clients" during the setup to activate the Ethernet port on the device.
I would also plug a printer (currently connected to the pc) into the usb, so it can become a shared printer.
There is a good chance that your printer will work connected this way, but you won't really know until you try. -
The Airport Extreme is a 4th Gen unit. I just want to keep the TC wireless name to go further through my house.
The Ethernet connection will be from one of the LAN <-> ports on the TC to the WAN port (circle of dots icon) on the AirPort Extreme.
Then you can use AirPort Utility - Manual Setup to configure the AirPort Extreme as follows:
Click the Wireless tab located just below the row of icons
Wireless Mode = Create a wireless network (Not "extend a wireless network" as many users incorrectly think)
Wireless Network Name = Same name as your TC network
No check mark needed next to "Allow this network to be extended"
Radio Mode = Automatic
Channel = Automatic
Wireless Security = Same setting as the TC network
Wireless Password = Same setting as the TC network
Confirm Password
Click the Internet icon
Click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and restart the entire network
Computers on the TC network will now be able to move to the area where the AirPort Extreme is located and not have to "switch" networks. This is known as a "roaming" network. -
Have new Airport Extreme conneted via ethernet cable from HughesNet Gen4 modem. Using NetGear WN3500RP extender. NetGear asks for different names for the 2.4 and 5 GHz bands. Most of what I have read indicates extender should have same name as main network? How is it best to configure with the Airport Extreme router 802.11ac?
Different names for the 2.4 and 5 GHz networks are optional, but can be convenient for you to distinguish one from another. It's up to you.
Maybe you are looking for
-
File system management when sharing photos/music with other users in Mac OS
I'm a new convert from the Windows world. I'm trying to setup multiple accounts for each user within my household. However, I'd like us to all share the same set of folders for photos within iPhoto and music in iTunes. Is it best to just used the "sh
-
I created a new thread in Database General forum (VM, LINUX RAC on Win XP before I found this forum. Admin, please excuse the double post; but, I figure I will get more appropriate response here. As mentioned in that thread, I'm a newbie and I'm tryi
-
my i phone5c were showing signs of loosing battery life quick, i visited to Apple store and they went through a few things and tbh it didnt solve anything, my phone were dieing fast and i had to put up with it, money battery went dead saturday night
-
Hi, is there any way to temporarily disable generating of hints in code (for testing purposes) or is the only way to delete them? owb 10.2.0.4 Thanks
-
Use a Lightroom Album/Catalog as Screen Saver on a Mac
Hello I am a long time Aperture User and after seeing the new Apple Photos App I am considering to move to LR. I have run a test version and basically LR is giving me all I need, except I could not find one feature that I like in Aperture. In order n