Using Airtunes while connected to an existing Wi-Fi network ?

Hi,
my Imac gets internet access through its airport card connected to a non airport wi-fi station (NeufBox).
I would like to stay connected to the internet while using Airtunes on my Airport Axpress.
I used the utility to connect the Airport Express to the existing Wi-Fi Network. I specified the mac adress of the Airport Express in my internet provider's device. But it doesn't work. I have internet, but airtunes doesn't appear in my speakers list in Itunes.
If I connect to the Airport express directly (and not through the existing network) then I have acess to airtunes. But not to the internet anymore !
Is there anyway for the Airport Express to access internet and use airtunes at the same time ?
thanks

Hello laptom. Welcome to the Apple Discussions!
Is there anyway for the Airport Express to access internet and use airtunes at the same time ?
Yes, you will just need to reconfigure your AirPort Express Base Station (AX) to "join an existing wireless network" as a wireless client.
Here's how:
Either connect to the AX's wireless network or temporarily connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing NeufBox's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Similar Messages

  • Using ipod while connected

    can I use my nano while it is connected to the computer. I get a "do not disconnect" message on the screen and can't seam to use the ipod itself. I want to be able to use the itrip whilst it is connected to to the computer charging but as soon as the usb cable is plugged in it stops playing.
    nano   Windows 2000  

    Hi sam,
    The "Do Not Disconnect" message is normal. You can play songs from your iPod through iTunes, but you cannot control through the iPod itself. If you want to charge and play at the same time, consider buying a wall charger.
    maz

  • Using airtunes without connecting to internet through airport express

    I am currently using cablevision and a modem, wirelessly, working fine.
    have extensive music library, want to play it through home stereo wirelessly.
    acquired airport express. computer finds it fine, but cannot skip using A Express as wireless connection
    help?

    you should be able to launch Airport Utility and setup your Express from scratch. The process is fairly self explanatory for me however, I found this tutorial that is pretty good and should get you through this ok, it's got screen shots to use as reference and covers the setup you are attempting to achieve.

  • Using WRT54GS to connect Desktop, Laptop, and PS3 to Network

    Hello.  I currently have a Linksys WRT54GS plugged into my Comcast Cable Modem (the Motorola one without build-in WiFi).  I have my desktop connected via an ethernet cable.  My laptop and PS3 are wireless.  I have been trying for some time to set up a network in my home where: I have internet on all 3 devices, the desktop and laptop can share files, and the PS3 can view the files on both computers.  I know this is possible.  So far, my PS3 recognizes my laptops shared files by default (no changes to network made).  The only device out of the loop is my desktop machine.
    By the way, both computers are running Vista Ultimate and the PS3 is on Firmware 2.60.  The router has the latest firmware also.
    Thanks, in advance, to anyone who can help.
    PSN: Darkness30XX

    If you want to enable file sharing between your Desktop and Laptop may be you can try some of this settings, this will help you out.Go to this Link.
    http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=5560&p_created=1173436226&p_sid=AiuwVOqj&p_accessibility=0&p_redirect=&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MjA1LDIwNSZwX3Byb2RzPTAmcF9jYXRzPTE3MjEsMTcyMyZwX3B2PSZwX2N2PTIuMTcyMyZwX3NjZl8zPTEmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD1zaGFyaW5n&p_li=&p_topview=1

  • G4 freezes while connecting to another Mac over the network

    This is a mirror-drive, Dual 1GHz PowerPC G4, 1.25 GB RAM. It was recently repurposed as a hand-me-down when we upgraded. We cleaned it up and reinstalled everything. It connects to the internet just fine. Other computers can find it on the network and connect to it just fine. When I try to connect from this G4 to any other Mac on the network, I can find the other computers and I get the login popup, but when I put in the password and click OK, I get the color-wheel that never goes away. I have to power it off and try again.
    This computer has been a work-horse for several years and has been on our network with no problems. This has just popped up since we moved it to a different desk.
    One side note, we did upgrade our network recently, but none of the other Macs (including 2 other G4's) are having this problem.
    thoughts? suggestions?
    thanks.

    What version of the Mac OS is the MDD running?
    This has just popped up since we moved it to a different desk.
    If that involved unplugging the computer from the wall, then a dead or weak PRAM battery may have let the computer lose something that it needs for the task. How old is the battery and how much time has the G4 spent off wall power in the last few years? If your firm requires unplugging computers at night (some do now in an effort to be more "green"), then the battery is surely dead by now.

  • Advice about using the laptop with closed lid while connected to external display

    Hello all HP forum members!
    I have an ENVY 17 with Win8.1 64bit, a great laptop, but I need an advice about using it while connected via HDMI cable to an external display (TV).
    When I play heavy 3D games, the computer produces more heat than usual (of course this is normal), but doing so with closed lid, could this harm the  display in some way, as a result of the heat?
    Thanks!

    Hi @VVel ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP ENVY 17 Notebook and issue with keeping the Notebook on while closing the lid. Here is a document on changing the Power option.
    Control Panel - Power Options - upper left - Choose what closing the lid does.
    Change Plan Settings and also check Advanced Settings. Make sure you do this for both battery and power.
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Is there a way to tell which apps are using data while on WIFI?

    Hello,
    I have just purchased an iPad Air 2.  I use my phone as a mobile WIFI hot spot to connect to the internet when I do not have a regular WIFI connection available.  151 MBs of data were consumed over an hour and a half or so.  I played about an hour of Hearthstone, but I know from tethering my phone to my laptop that it usually doesn't use anywhere near that amount of data.
    I would like to track down which applications might be using the data so that I can avoid using them while connected to my phone.  Is there any way to do this?

    Thanks for the quick response.  That's a little disappointing though.  Is there an app on the store?

  • Airplay Connection issues - An error occurred while connecting to the AirPlay device "x". The network connection failed.

    I recently upgraded to a new MacBook Pro running Mountain Lion, and got my Airport Express (802.11g) out of the closet and set up an AirPlay network for my speakers. 
    All worked well for the first while, but recently I've been having an inconsistent problem with this: "An error occurred while connecting to the AirPlay device “my network name”. The network connection failed."
    Since it came up, more often than not, I can't connect. 
    I can play without issue from my iPhone, and from my iPad. 
    I looked around these forums, and found a couple threads dealing with this from 2011, with no clear resolution to them.  No one with Mountain Lion seems to complain about it, though a few people mused about whether Mountain Lion might fix the problem. 
    I'm running iTunes 10.7(21), and don't recall doing any upgrades to it that might have brought this about, though I can't say for sure. 
    My Airport Express is updated to firmware version 6.3, which I believe is the last one issued for the 'g' Airport Express.
    My wireless network runs off an Airport Extreme 802.11n (Second Generation) with verion 7.6.1 firmware. 
    My Mac has 10.8.2 on it right now. 
    Hopefully some of that info might help sort this out - any replies greatly appreciated!

    One quick update.  A workaround that was mentioned in one post did seem to work - if music is started via the Remote app it seems to connect fine. 
    And I'm not sure if I dare upgrade to iTunes 11 given the firestorm of bad impressions I see, including some that relate to Airplay functions...

  • Airport express connection to existing DLink wireless network & old iMac

    I have an old iMac (G4 800 mhz). I don't want to buy an old Airport card -- would rather connect to my existing wireless (DLink) network with an Airport Express. Is this possible? Can I go from my cable modem to my DLink wireless router to an Airport Express AND from the Airport Express to my old iMac with an 10/100 Base T Ethernet connection? Essentially will the Airport Express act like an external Airport card? Thanks for any help you can provide... gmosfd
    iMac G4 800 mhz   Mac OS X (10.4.3)  

    I bought the old version Airport on line -- the new one will not work with this model of iMac, bummer!

  • Best way to add new dual band Extreme to existing b/g network

    I've been using a Snow Extreme and b/g Express, but have recently been having dropped/slow connection issues. I think this may be at least partially caused from the many other networks and other wireless devices in the neighborhood - I can see 30 or more networks at times. I've also gotten a new Mini and MacBook, both with n wireless, so I decided to get a new dual band Extreme.
    The faster connection speed of the new Extreme is very noticeable on my n capable machines. It also looks like the connection issues I was previously having may have been resolved, but its a bit early to tell for sure.
    First problem I've had is with setting up the guest network. If I attempt to set it up wirelessly, I get as far as changing the settings and restarting the Extreme. Once I do, it does restart, but then Airport Utility is not able to find it after restart. I am able to see the main and guest network in my available networks, but I am unable to join either. Once I turn guest off (via ethernet since Utility isn't able to see it wirelessly) I am again able to see it in Utility and connect to the main network. If I try to turn on guest via ethernet, I get an error and it does not restart.
    Originally the Snow Extreme was the main and the Express was used for wireless printing. My plan was to use the new dual-band as the main, move the Snow to the printer, and use the Express for AirTunes. But now I realize that I'm only able to print and use Airtunes on the main and not the guest network. Since the Snow and Express are b/g, are they going to slow down the main network? I am seeing these as clients in Airport Utility, which I didn't expect. If so, is there a better way to set this up than what I am attempting to do?
    I've got the radio mode set to 802.11n only (5GHz) - 802.11b/g/n. Am I able to set it up so that the n capable clients use the 5GHz band and the b/g clients use the 2.4GHz band so that they don't slow down the n connection, or would I even want to do this?
    Thanks!!!

    The jre is 14,872 KB (j2re-1_4_2_03-windows-i586-p.exe).
    If you silently install the JRE then then licensing doesn't appear to be an issue (no dialogs appear). See http://java.sun.com/j2se/1.4.2/docs/guide/plugin/developer_guide/silent.html. Silent installation is perfect for us since our customers are very nontechnical and would be very confused about the JRE installation dialogs.
    My main question remains: what is the best way to incorporate the installation of the JRE into an existing product. I solved the above-mentioned error 1500 problem by asynchronously starting the silent JRE installation after my product is installed, i.e., after the InstallFinalize step. This results in a bad human interface: the user is prompted with the final dialog with a "finish" button. However the mouse cursor is showing an hourglass intermittenly (kind of like when you logon to Windows after a reboot), for 25-40 seconds after this dialog first appears, until the JRE is installed. I have got to figure out a way to synchronously install the JRE while the user waits.
    I chose to do a private install (search for "private" in http://java.sun.com/j2se/1.4/pdf/plugin-dev-guide-1.4.2.pdf), which works, but I haven't yet figured out the best way to uninstall this JRE -- it appears that simply deleting the directory tree might be the correct way to uninstall.
    I have searched a lot of newsgroups for the "generally accepted" method to incorporate some Java programs into a product (i.e., how to install the JRE). I have not found anything. My conclusion is that I must be doing something that isn't done that often, either that or I've taken a wrong turn.

  • JDBC Connection Jobs Continue to Run After Network Issues

    We've got 7.0 SP13 installed in our DEV and QAS environments.  We connect to iSeries DB2 tables using a JDBC connection.  We recently experienced a network issue that shutdown PI.  Problem is that the system jobs used to connect to the iSeries are still running and still requiring more and more temporary storage.  We've rebooted our PI boxes but still these connection jobs continue to run and gobble up more memory.
    Are we missing something in our configuration of these communication channels that will force these jobs to end???
    Thanks in advance,
    Chad

    iSeries is on a separate server altogether.  JDBC connection to the iSeries is setup through the communication channel.
    Problem is that the network issue that disconnected PI from the iSeries left these communication jobs running on the iSeries. 
    Rebooting PI only created MORE of these communication jobs.
    Thanks for the reply VJ, but I don't believe the poll interval would help me in this case.
    Chad

  • I had itunes played from my PC to my music system that is connected through a nework.  It use to work fine, but now I get an error message that say "An error occured while connecting to the Airplay Device "Stereo".  An unknown error occured (-15000)".

    When trying to play itunes from my PC to my stereo connected to an Airport Express, I gen an error that says "An error occured while connecting to the Airplay device "Stereo" an unknown error occured (-15000)".  This has happened before and for reasons unknown to me, the problem corrects itself, then it starts again/  Makes me wish I did not have my music on itunes.

    moehadi, Welcome to the discussion area!
    This is typically caused by a firewall or Internet security software running on your PC. Please read the comments in "Error -3256 or -15000 when streaming to AirPort Express base stations using iTunes".
    Also there is "iTunes 8: Unknown error -15000 when attempting to stream music to devices connected to AirPort Express with AirTunes".

  • HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    You probably can, but this type of configuration is not recommended or supported by Apple.
    Two cautions if you want to try this:
    1)  The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
    2)  Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule.  Two "hops"......even if the computer is located close to the Time Capsule.
    If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

  • Power Pivot Configuration error while refreshing connection on excel sheet for SharePoint 2013 and Sql server 2014 using BISM file connection

    I am getting following error while refreshing connection on excel sheet in power pivot gallery,
    my scenario,
    using BISM file connection to create and  refresh power pivot excel sheet in power pivot gallery
    throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
    Microsoft.AnalysisServices.ChannelTransport is not available. 
    i found error in event viewer,
    "Activation context generation failed for "C:\Program Files\Microsoft Analysis
    Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
    Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
    not be found. Please use sxstrace.exe for detailed diagnosis.
    what should i do to fix it?
    Thanks for help.
    Deepak Patel

    Rebecca,
    yes, this is issue i am getting.
    Activation
    context generation failed for "C:\Program
    Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
    Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
    not be found. Please use sxstrace.exe for detailed diagnosis.
    let me know if you can find fix for it.
    THanks,

  • I am getting error while connecting to sqlplus by using apps account in 11i

    i am getting error while connecting to sqlplus by using apps account in 11i. Does anyone has similar error.
    [applmgr@appsc05t01 admin]$ sqlplus
    SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 14:34:52 2010
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter user-name: apps
    ERROR:
    ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
    Enter user-name:
    Thanks
    Rao

    yes.
    login as: gorantla
    [email protected]'s password:
    Last login: Mon Sep 13 14:39:23 2010 from glng3wy9g1.actuant.pri
    [gorantla@appsc05t01 ~]$ sudo su - applmgr
    [applmgr@appsc05t01 ~]$ ora_setup
    Available databases:
    x = ATUXX
    y = ATUYY
    z = ATUZZ
    Select database: \c
    y
    ORACLE_SID=ATUYY
    IAS_ORACLE_HOME=/apps/ATUYY/atuyyora/iAS
    ORACLE_HOME=/apps/ATUYY/atuyyora/8.0.6
    APPL_TOP=/apps/ATUYY/atuyyappl
    [applmgr@appsc05t01 ~]$
    [applmgr@appsc05t01 ~]$
    [applmgr@appsc05t01 ~]$
    [applmgr@appsc05t01 ~]$ tnsping ATUYY
    TNS Ping Utility for Linux: Version 8.0.6.3.0 - Production on 13-SEP-2010 15:42:32
    (c) Copyright 1997 Oracle Corporation. All rights reserved.
    Attempting to contact (ADDRESS=(PROTOCOL=tcp)(HOST=dbrac05t01-vip.actuant.pri)(PORT=1611))
    OK (0 msec)
    [applmgr@appsc05t01 ~]$ sqlplus
    SQL*Plus: Release 8.0.6.0.0 - Production on Mon Sep 13 15:42:40 2010
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter user-name: apps
    ERROR:
    ORA-12514: Message 12514 not found; product=RDBMS; facility=ORA
    Enter user-name:
    Thanks
    Rao

Maybe you are looking for