Using aliases for indicators, controls, procedures and calculated channels

Hello,
I noticed that aliases do not show up in the workspace for indicators and controls, and in the system explorer for procedures and calculated channels. Is there a way for them to show up? I need to use aliases because I would like my system definition to control multiple test systems (which have different CAN signal names). Otherwise my system definition would break whenever I switch to a different CAN database. I thought the inability to address aliases was limited to the right click configurable controls add on, but it looks like VeriStand natively cannot address them in the areas that I'd like as well. Any recommendations would be welcome.
Thanks.
Solved!
Go to Solution.

You are correct that you cannot use Aliases within a System Definition file for mapping purposes. This is an area that we hope to improve in the future. The initial design of aliases was to serve as a public interface for the Workspace, stimulus profiles, and so on. However, it is certainly a valid use case to want to use them as an interface within a System Definition.
One possible workaround would be to create a set of User Channels that act as your public interface in your System Definition. Always use your User Channels in all procedures, calculated channels, and so on. Then map your CAN channels to these User Channels. Whenever you update your CAN database, you only need to remap the new CAN channels to the appropriate User Channel. You could also automate this activity by importing a tab-delimited file in the Mappings page. The one downside here is that your target will take a little extra time to process these mappings.
Jarrod S.
National Instruments

Similar Messages

COPA Assessment Cycle using KEU5 for multiple controlling areas

Hello All,
There is an organization with operations in several countries. There is a separate controlling area for each country. There is one controlling area, for instance, for Germany and another for Netherlands.
A problem is encountered while executing transaction KEU5 for multiple controlling areas in parallel. For instance, when one user from Germany executes KEU5 for an assessment cycle for Germany controlling area and at the same time another user from Netherlands tries to execute KEU5 for a cycle for NL controlling area, the user from Netherlands encounters an error message u201C'Cycle XXXX 01.02.2008 cannot be started because run group 0000 is locked'.
Apparently SAP allows assessment cycles for exactly one controlling area to be executed together. This poses a problem since the organization plans to implement SAP in several other countries (There will be one separate controlling area for each country as per the organization structure adopted by the company).
Any ideas, views or suggestions on the aforesaid issue would be highly appreciated.
Regards,
Soumya

Hi Soumya,
Did you find any text in SAP Documentation saying that "SAP does not allow cycles belonging to different controlling areas to be executed at the same time"...?
Pls find the following text from SAP Help...
Parallel Processing of Cycles of an Allocation Type
Use
Parallel processing of cycles results in considerable time savings. To process cycles of one allocation type in parallel, they must be assigned to different cycle run groups.
You define the cycle run groups in the cycle header data. You also assign cycles to the cycle run groups in the header data.
To process the cycles of a cycle run group in parallel, start the cycles one after the other, if required, in different sessions.
You are carrying out a cross-company code cost accounting and want to perform the actual assessment in the individual company codes in parallel. Create a cycle run group for each company code and assign the appropriate cycles to these groups. You can then carry out the actual assessment in the individual company codes in parallel.
When you execute a cycle, you can start a consistency check. The system checks whether you are allowed to execute the selected cycles in parallel.
Though I didn't come across such requirement, I feel, my earlier suggestion will work out...
Srikanth Munnaluri

Default values for the controlling area and language

Hello
I have a query.
I need to set default values for the controlling area and language in the screen
"find account assignment data 1"
Is it possible to do so?
Thanks.
Jayawant Gokhale

Hello
To clarify,
This is the search used ,when I go for shopping.For the Cost assignment,the fields controlling area and language should be default for a user.
Could someone throw a light on this.
Thanks.

Two related questions: using htmldb_Get to call stored procedure and passing in an array of items

I have the need to save dynamically generated ApEx items via AJAX. I am using APEX_ITEM API to generate the items. At run-time, I have no idea how many of items will be generated on the page, but I know that they will all have discreet and distinct "name" attributes, i.e. f01, f02, f03, etc. As a basic example, if I have to generate a select list, I know that the "p_idx" parameter of the APEX_ITEM call is say "3", so all select lists that get generated will have a "name" attribute in the DOM of "f03", all text items will be "f01", etc.
I want to save this data to the database via AJAX. It is typical to call the standard htmldb_Get javascript function for use of an on-demand process, but I am interested in using the rarely-called-upon "procedure" and queryString" options of that javascript function so that I can build the queryString on the fly based on what is on the DOM when the tries to save the data they entered into these APEX_ITEM-generated items. Does anyone have any good examples of how to use the "procedure" and "queryString" parameters of the htmldb_Get javascript function?
I have found a smattering of some blogs, posts, etc. online related to this, but mostly just people regurgitating the documentation. I found this post (https://forums.oracle.com/thread/2549237) which had a glimpse of hope to be able to pass an array (which is something I will need) as a parameter, but would like someone to sanity check this before I go down that road.
Shane.
ApEx 4.2.1

Shane
Since you mention you are on APEX 4.2 I would recommend using apex.server.process which is the documented replacement of the officially undocumented htmldb_Get.
In the documentation it is set that the first parameter is the ajaxidentifier but it actually is the process name.
The data object would be something like
var lData ={f01 : get_value_array('f01')}
Where get_value_array is
function get_value_array(pColumnName) {
var l_values =[];
apex.jQuery('[name="'+pColumnName+'"]').each(
   function(){
    var l_value;
    l_value = apex.item(this.id).getValue();
    l_values.push(l_value);
return l_values
For a working example see this demo.
Nicolette

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. What do I do?

I cannot access my old email address anymore, however I have used it for my apple ID and now I want to delete it because the account has never been verified in the first place so my password for it doesn't work. So when I want to download apps I have to sign in with apple id but I can't so I made a new one, However I can't seem to be able to delete the old one. What do I do?

You can't merge Apple IDs. You also can't cancel (delete) and existing ID, you can only choose to stop using it.
If your old ID was compromised and you can no longer access it, you'll have to contact Apple for assistance. Go to https://expresslane.apple.com ; click 'See all products and services' at the bottom of the page. In the next page click 'More Products and Services, then 'Apple ID'. In the next page select 'Other Apple ID Topics' then then 'Apple ID account Security’.

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David

I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow , will there be an updated or this soon?

I've been using samsung for a long time and I just changed into an iPhone 5s and the most important thing I need is my calendar appointments , but in the notification center it doesn't show my events for tomorrow and it doesn't even show more than 1 event , will there be an updated or this soon? Or should I just shift back to samsung?????

Go to settings/notification centre and make sure today vie and calendar day view are both on

When i use language for non-unicode [Russian] and i insert another language

when i use language for non-Unicode [Russian] and i insert another language. it transform to Russian.
i insert Thai language into MS access it transform to Russian type.i try to change anything,CharSet, sun.jnu.encoding.
but it doesn't have any effect.How can i insert Thai data into database and in database shown Thai data not another type.
Thank you for help.My English is not good,Sorry

that is a little-known known issue
Check this post:
http://myitforum.com/cs2/blogs/smslist/archive/2009/01/12/mssms-userlocale-in-mdt-sccm-also-changes-system-locale-9a532hdf.aspx
He details how to modify the ZTIConifgure.xml file.

HT1369 i have a old i pod that i use to used and i stop useing it for a few years and now i have a i phone and i want to put all my music on my i pod in to my iphone and it would not allow me to do so what can i do

i have a old i pod that i use to used and i stop useing it for a few years and now i have a i phone and i want to put all my music on my i pod in to my iphone and it would not allow me to do so what can i do

You need to move the music from the iPod to your iTunes library on your computer then sync with the iPhone.
Assuming you have a PC you can use this: http://www.yamipod.com/main/modules/home/

I want to use Firefox for a specific webpage and my Safari for the rest of my browsing. I have an Apple macbook and am very new to Firefox

I want to use Firefox for a specific webpage and Safari for the rest of my browsing. I have an Apple macbook and am very new to Firefox

I thought my response was clear, but to reiterate:
1. 10.5.1.42
2. None, nada, zero, zilch. I have no iPhone account with any carrier. There is a deactivated ATT sim card in the3 phone. Someone gave it to me. I only want to use it as an iPod Touch.
3. PC with Windows 7 (I can offer more detailed info, but I am not sure how that would help.
I had already read that link. Reset did not resolve (both hard and soft)

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff

I don't know what to order. I want PS for photo editing and some composting. I don't do any website work or sharing yet. I have been using elements for a few years and also have Lightroom 5 on my desktop. I don't want to spend $1000s for a bunch of stuff I don't use. Any advice on what to buy?

Well, there is a whole world of free or affordable software out there like GIMP, PDPaint and similar. Otherwise if you want to stick with Adobe stuff signing up for the CC photography program would be the most cost-efficient way...
Mylenium

I have been using itunes for 6 years now, and was listening to my music the other day and noticed that some of my songs were stopping short of finishing.

I have been using itunes for 6 years now, and was listening to my music the other day and noticed that some of my albums songs were stopping short of finishing. They just stop and go to the next song. Any solutions?

I have experienced the same problem on my my iPad1, my former iPhone 4 my laptop and even my new iPhone5 though I had really hoped that the new phone and IOS would solve the problem. About 5% of the songs are affected and the stoppage can range from seconds short to a minute and a half. The file shows more of the music left, but it stops playing and goes to the next song. Very aggravating. Appears to happen on purchased and uploaded music.
Any help Apple?

I'm going to be a freshmen in college soon and don't know what laptop I should buy. What do I need to look for? I will be mainly using it for typing essays, research, and music.

I'm going to be a freshmen in college soon and don't know what laptop I should buy. What do I need to look for? I will be mainly using it for typing essays, research, and music.

You should contact the department of studies at the school and ask what types of application that you might have to use. If there are Windows based ones, then you may have to consider installing Windows in your MBA or get a PC. This could have an influence on the amount of storage the MBA should have.
Ciao.

I'm wondering if I should update to firefox 5 from firefox 3.6? I use Zotero for my dissertation research and I have lots of stored info in Firefox 3.6 like frequent flier numbers that load automatically that I don't want to lose. Suggestions?

I'm wondering if I should update to firefox 5 from firefox 3.6? I use Zotero for my dissertation research and I have lots of stored info in Firefox 3.6 like frequent flier numbers that load automatically that I don't want to lose. Suggestions?

My advice is to stick with Firefox 3.6.x for a while yet, it is still supported.
Otherwise, see the Zotero website for advice about their program and updating to Firefox 5.0 (or 6.0 when it is released in 3 weeks).

Using aliases for indicators, controls, procedures and calculated channels

Similar Messages

Maybe you are looking for