Using all in one B109n-z. on Windows 7

When scanning output is gobbldygook. can anyone help please

lesstilo,
I am sorry you are having an issue with your scanning output. I would suggest following the document below and see if it can help you.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01839812&tmp_task=solveCategory&cc=us&dlc=en&lc...
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Enquiry regarding functionality of HP ALL IN ONE Q 1660A on windows 7

Dear sir,
I was using the referred HP 'ALL IN ONE(PSC) with Windows XP Professional version successfully. Now I am having windows 7 in my desktop. Kindly advise that the same HP " ALL IN ONE" would work on windows 7. Also please clarify whether the new driver is to be installed for the same. If so please provede me the link from where I can download the necessary driver.

Hello @parth_pari,
Welcome to the HP Support Forums!
I understand that you're looking for a Windows 7 driver for your HP PSC 1200 series All-in-One Printer. Upon looking into the driver compatibility for this printer I found that in Windows 7 you need to use the Windows Update feature on your computer to install the printer as HP does not have a downloadable Full Feature Software and Driver package available due to the age of the printer. There hasn't been a Full Feature Software and Driver available for this series of printer since Windows XP.
You can still use the HP PSC on your Windows 7 computer.
For instructions on how to install the printer using the Windows Update features, please click here.
I hope this helps clear up any confusion!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Does hp-v40,all in one is supported by windows 8? are drivers available?

does hp-v40,all in one is supported by windows 8? are drivers available?

Hi,
Based on the following, no more support from Vista ages that means at least 6 years:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=2093&lc=en&cc=us&dlc=en&sw_lang=&product=6063...
With luck, Windows 8 can find a generic, basic driver for your machine to print. Otherwise it's time to buy a new printer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to install hp all in one officejet x64 drivers windows 8 it

unable to install hp all in one officejet x64 drivers windows 8 64 bit from hp website the select all button is not working.

Hello louvallee,
If you had upgraded you PC OS to win 8.1 and if you were able print with the prior OS, then you may have to first uninstall the existing printer software and try step#
Else
1) Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

After operating a HP Officejet 4500 All-in-One Printer - G510g from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
The www.hp.com site offers a download of a full driver for the printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
There are no options to uninstall, either in control panel/printers or in control panel/software.
Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
I have also tried the HP Printer Installation Wizard. The result is similar.
Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
Thank you
This question was solved.
View Solution.

Hello @monc , welcome to the HP forums!
I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software
Restart the PC afterwards
Perform a Clean Boot
Restart the PC again
Download and install the printer again: HP Officejet Full Feature Software and Driver
If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

All in One printer issue with Windows 8.1 update

Hi all,
Hoping someone out there may be able to help with the following.
I have a Canon MG8250 all in one printer/scanner. All was fine on Windows 8, but then upgraded to 8.1 a couple of weeks ago. Just got round to using the printer and scanner and the printer wouldn't work (scanner was fine). Uninstalled MP drivers and reinstalled from Canon site and all seemed fine with the printing. Alas the scanner now would not work. Did the same, uninstalled MP Navigator Ex and reinstalled from Canon site, but no fix this time. PC says "Cannot start MP Navigator Ex" and printer says "Set PC to start scanning".
Anybody know how to fix?
Thanks,
Peter

Hi @louielou581 ,
Thank you for visiting the HP Support Forums. I'm sorry to inform you that your post has needed some editing to remove personal information such as the email address in your post. From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

HP All-in-One 2355 Shared from Windows PC - Cannot print from any Mac

Hi all!
I have a HP All-in-One 2355 printer. It is installed correctly on my Mac, and when I try to use it connected by USB, works fine.
But the printer is all the time conected to a PC, where is installed to. The PC runs Windows XP, at is in the same Wireless network as my MacBook Pro. The printer is "shared" on this PC.
When I search the HP 2355 with my MacBook throught wireless, I can find it. I see it if I going to Preferences Settings, Printers, Windows, Workgroup... Then I can add the printer, but I can't select any driver to asign, because the driver for HP All-in-One 2350 series don't appear.
What can I do? I contacted with HP, but they tell me that they don't support sharing between Windows and Mac.
Please, Help me!

Install this three-part driver:
http://www.linuxfoundation.org/en/OpenPrinting/MacOSX/hpijs

Photosmart 6180 All-in-One Wireless Connection After Windows 7 Laptop Added to Network

I replaced a broken Vista laptop with a new Windows 7 64-bit laptop. After I installed my Photosmart 6180 All-in-One, the printer stopped working correctly when we try to connect to it wirelessly.
I followed all the directions HP provides for updating the printer software and drivers for Windows 7.
We've tried all the suggestions for resetting the printer that we can find on the HP forums.
The printer works properly when connected via USB cable to a Vista laptop.
I was not able to get the printer to work via USB cable connected to the Windows 7 laptop.
When we try to connect via the wireless signal, regardless of Vista or Windows 7, the printer goes into an endless initialization loop.
We need to determine whether achieving a wireless connection is hopeless. If it is not, we need step-by-step instructions on how to resolve the issue.
The security system for the printer is WEP. We connect through a wireless router provided by Verizon FIOS.
Many thanks in advance for your help.

Some of HP's printers do not support WEP shared. If you are using WEP shared this could be the problem. I would suggest turning off the WEP security temporarily to see if that fixes the issue. If it does then you can look at changing the security to WEP Open system authentication.
Mike
Say "Thanks" by clicking the Kudos Star in the post that helped you.
I am an HP employee.

HP Officejet 4500 Desktop All-in-One Printer - G510a and Windows 8.1

The drivers for this do not seem to work on Windows 8.1. Whilst I can print no problem I cannot access the solution centre from my new laptop and i cannot scan. It gives me the message No scan options refer to device documentation to troubleshoot. It works fine on my old laptop which has Windows XP installed.
NB i have tried installing from your website and when i click on install it runs for a few seconds then sends the error message that it cannot find the file.
Does this mean that the HP Officejet 4500 Desktop All-in-One Printer - G510a is not fully compatible with Windows 8.1. Help please I am getting very frustrated.

Hi amp229,
Welcome to the HP Forums!
I see that your are getting the specified file cannot be found error, during the installation.
Please try the following:
1.) Check that IE pop-up blockers are turned off before downloading the installer. Internet Explorer Pop-up Blocker: frequently asked questions.
Then try the install.
2. If you're running McAfee Live Safe or any other firewall, please temporarily disable the "real time scanning". Turn off real-time scanning.
Then try the install.
3. Go to the start screen (you may also press the windows key + R to open the run box) and type %WINDIR% this should show the windows folder.
Click on the folder and scroll until you see files. Look for a filed named "HPWINS*.DAT" (the * is for a number that varies) remove this file and try the installation.
Then try the install.
Hope this information helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Best Home use All- in one scanner/printer that will run on linux

Doestic Use - UK . What would members recommend as the best all-in-one printer scanner colour, to use on linux with full wireless capability and photo mainipulation software addons etc. Runnung Ubuntu based 14.04 - Linux Lite 2.4 Thanks

I think you will not get a general consensus. Canon is my preference, for both work and at home, but others will tell you they are rubbish, most likely due to a previous bad experience, such as your friend has had.
What I can say about the Canon products is that they have improved their driver and software functionality compared to the days of 10.2. There are still some shortfalls, but there is definitely more support for OS X than there ever was previously.
With your friends requirements in mind, I would suggest the MX700. It offers Ethernet and USB connections for printing, faxing and scanning. It also does a reasonable job of photo printing.
Here is a CNET review
http://www.cnet.com.au/printers/multifunction/0,239035478,339281337,00.htm

Can my Macbook use an all-in-one connected to a Windows Home Server

Hey All, How do I connect my Canon Pixma MX700 to the Windows Home Server and be able to both Print and Scan from my Macbook over the network.

I just saw this post--it's for a different Canon than yours but it might point you in the right direction:
"The Canon MF6500 series uses the Canon UFR2 printer driver, which also supports the larger Canon multifunction copiers. If the printer is connected directly to the network via Ethernet, you use the More Printers > Canon IP (UFR2) option to enter the ip address of the printer. If the device is connected via USB, the Default browser view is used. In both cases, the user has no option to manually select the model in the print using menu. The driver communicates with the printer to determine which model it is.
If you have the printer connected via a Windows share, or to the USB port of a wireless router, the driver cannot 'see' the printer and will not complete the creation of the printer queue.
For a wireless router with Ethernet ports, you can connect the printer via Ethernet and then use the More Printers function. Of course the printer would require an Ethernet port for this to be possible, and I am not sure if you have such an option on the MF6500. If not, then you won't be able to use the printer the way you want.
FYI - the Apple Canon driver package is for the inkjet printers only.
PaHu"

Photosmart C4585 All-in-One no OCR on Windows 7

When I upgraded from vista to Windows 7, I downloaded the new driver from the website for scanning. I was only using this for pictures until now so I did not notice that it did not seem to have the OCR element for scanning text. This week I have been trying to use it to scan editable text and found that this option is missing. The manual said that you should install this feature from your CD, so I reloaded the full driver from the website (as my CD is for the vista OS). This did not work and it STLL does not offer me the option to scan editable text. I tried to find the OCR componant seperately, but only found one for vista on the HP site,( which was not compatible - I tried to install this, but it would not load or work with my driver). I now seem to have 2 copies of the driver, both of which seem to work, and yet neither do charcter recognition, both offering me the same options ( pdf and all the other usual image formatts, but no OCR/text scanning). Does anyone know how to get this working? (I'm on 64 bit windows 7) and really need the feature now. Thank you.

Hi @Angie2 ,
I would like to help you out with the OCR Software for scanning.
Windows 7 uses Version 13.1.0 software and the Windows Vista uses Version 12.0.1.
The software Version most likely doesn't support OCR Software.
When installing the Windows 7 drivers, if it gives you a option for a custom install, you might be able to select OCR to install it, if it is available.
Most of the Officejet models do support OCR Software.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

How to use all the functions on my Bootcamp/windows 7 side?

Hello,
Soooo I have an apple desktop running osx 10.4.8 i think, and recently my keyboard got coffee spilt all over it. 3 months later I have brought a new one, but what I didnt realise that its a completely new updated one.... so when I connected it to my windows 7 it works fine, but when I go to use the volume buttons and the brightness controls... they dont work.. when they use to work on my old keyboard. I read somewhere that I might need O Sx 10.6.8. so I went into the mac side of the computer and downloaded it. but nothing changed.
how can I get these functions to work on the windows side of the computer?
THANKS!

Read http://support.apple.com/kb/HT1747?viewlocale=en_US&locale=en_US
PS Posting your email address on a public forum is a poor idea. It is very easily harvested by the spammers when you do that. I have asked the Mods to edit it for your protection.
Allan

All in One Remote Ap for Windows 8.1

Trying to figure out why when I open the AiO ap on my computer it always say my printer if offline..and I know it is online, Any suggestions..Also my printer keeps going to sleep and going offline as well..I have to unplug it almost everytime I need to used it..All firmware is up to date.This has been a ongoing problem and very frustrating..And also the power light is never on but the display functions as normal sometimes it blinks..Super frustrated with this printer..Any Ideas..

Hi, I don't know ahy it has a full software and drivers for Windows 8.1 and you have to use HP AIO Printer Remore app which is designed for mobile devices (smartphone, tablets ...). Anyway, my suggestion: give it a fix IP address, I normally give wireless printers something above 100 for the rest of their lives in my house. Regards.

Can not connect printer HP photosmart all in one 6510 with my windows 7 home edition PC

Stuck! Please help. I'vre uninstalled and reinstalled several times: restore PC to previous working time; checked all passwords and IP addresses. Do wireless connection (home group) network - says it can't connect up by wireless, evenb though it says printer is connected up to internet as is PC. USB connection it jams on the drawing of the ethernet connection. PC does not accept updates-they all fail. Last week I had no such problems. Rolfus
This question was solved.
View Solution.

Hi Rolfus,
Welcome to the HP Forums!
I understand that your HP Photosmart 6510 will not print with your Windows 7 PC.
I would suggest going through this guide. Printer Does Not Maintain Wireless Connection.
Hope this helps, and have a good day.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Using all in one B109n-z. on Windows 7

Similar Messages

Maybe you are looking for