Using ALT key in list view doesn't quite work like it used to...

I haven't used this feature since OS9 so please excuse my ignorance!
In OS9 when viewing files in Finder in List view, one used to be able to open subfolders by holding down the ALT key while clicking the folder triangle. Close the main folder and ALT-clicking open again would open a second level of subfolders et cetera.
However, in OS X it appears that ALT-clicking a folder's triangle now opens ALL subfolders in one go (which can hold up the Finder quite a bit if you have a lot of stuff), and ALT-clicking the folder's triangle to CLOSE the folder doesn't close all the subfolders in one go (they are all open within the main folder).

A faster way, which works for me when I have logged out, is to log in, get the Discussions home page and then hit reload, which takes me to the thread I was looking for.
Hope this works for you,the alternative is to keep logged-in in your browser and avoid all this.

Similar Messages

Using alt key in console vim.

Hi folks,
Does anyone out there have a working method for using alt-<key> mappings in vim on the console? I've read a fair amount and the consensus seems to be "tweak all these different things to find what works on your system". So, what works on Arch (on a standard PC)?
First off, I read this:
http://vimdoc.sourceforge.net/htmldoc/m … p-alt-keys
I am currently trying some vim maps like
nmap <a-s> <C-w>s
And I'm using urxvt, so have tried the following in my .Xdefaults:
URxvt*meta8:true
This stops urxvt from converting alt key presses into esc-<key> patterns, but it's not activating the vim map. (It works in gvim BTW).
Has anyone got this to work? Or is the consensus that esc-<key> patterns are the way to go, with a .vimrc adapted to accept them, e.g. as in this:
http://vim.wikia.com/wiki/Fix_meta-keys … nsert_mode
A working config would be much appreciated!
Pete.

petelewis wrote:
Mr.Elendig wrote:it returns ^[a as it should.
Ah ha - okay. So you're using escapes too, rather than meta8 (this is the default, so makes sense). Yeah, I got it working doing that, but had to adapt my .vimrc to get it to acknowledge the ^[ as "alt". Didn't you, or did a simple map of e.g. <A-a> suffice?
Are you running it in screen/tmux btw? and what is your TERM set to?
Yeah, I thought that too and though I do run it in tmux usually, I've been testing it both with and without (TERM is set to screen-256color BTW) and it made no difference. Still, unless I specifically map the ^[ to alt in vim, it doesn't work. With meta8 it works so long as the locale is not UTF-8.
Guess I've got a workaround for now, but it would be nice if meta8 and utf-8 worked nicely together.
Thanks.
Could you please show how your vimrc looks like? I have the same problem and I'm interested in your workaround.

Re: Using Alt-Key combinations

Unfortunately this happens not only with Alt-Key combinations. It also
happens with the ordinary F10 key: Windows activates the menu and then
Forte gets the FKey event. The problem is that now the user has to press
ESC to deactivate the menu and continue normal processing. There is no
known cure yet...
Tony Elmore wrote:
>
We are attempting to use Alt-Key combinations for a shortcut key combination
for push buttons using the SetAsFunctionKey method and FunctionKeyPress
event. When we press the Alt-Key combination, it appears that Windows is
trying to find a menu item with that shortcut combination or a button with
that combination. Since Windows can not find the proper element with that
combination, it beeps at us. At that point, Forte picks up the key
combination and will post the FunctionKeyPress event.
The application will work fine, but the beep is not only annoying, but also
is misleading for those individuals using accessibility tools like screen
readers who rely upon audible queues for detecting errors in keyboarding.
Has anyone found any viable solutions to this problem?--
Dr. Thomas Kunst mailto:[email protected]
sd&m GmbH & Co. KG http://www.sdm.de
software design & management
Thomas-Dehler-Str. 27, 81737 Muenchen, Germany
Tel +49 89 63812-221 Fax -444
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

petelewis wrote:
Mr.Elendig wrote:it returns ^[a as it should.
Ah ha - okay. So you're using escapes too, rather than meta8 (this is the default, so makes sense). Yeah, I got it working doing that, but had to adapt my .vimrc to get it to acknowledge the ^[ as "alt". Didn't you, or did a simple map of e.g. <A-a> suffice?
Are you running it in screen/tmux btw? and what is your TERM set to?
Yeah, I thought that too and though I do run it in tmux usually, I've been testing it both with and without (TERM is set to screen-256color BTW) and it made no difference. Still, unless I specifically map the ^[ to alt in vim, it doesn't work. With meta8 it works so long as the locale is not UTF-8.
Guess I've got a workaround for now, but it would be nice if meta8 and utf-8 worked nicely together.
Thanks.
Could you please show how your vimrc looks like? I have the same problem and I'm interested in your workaround.

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

I updated to yosemite and now if someone is using imessage and sends a text message to my phone it doesn't show up on my phone but does on my computer. I don't want messages on my computer! How do I get this to go away and work like it used to?

Follow the instructions under the heading "How to unlink a phone number" on this page.

I have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they r printed?

i have my mac pro with the keyboard in spanish and i didn't knew that it was going to be a big problem because i can't use the key pads the way they are printed, how can i use them the way they are printed?

why can't you use the keyboard the way it is printed?

Why is elements 12 not working with OS 10 yosemite Editing tools aren't working like they used to.????

Can someone tell my why Elements 12 photo editing tools wont work with OS 10 Yosemite?

duplicate, see:
why is elements 12 not working with OS 10 yosemite Editing tools aren't working like they used to.????

My iPhone 4s sleep button is working like it use to and i have to press it real hard for it to work at times

my iPhone 4s sleep button is working like it use to and i have to press it real hard for it to work at times

Take it to an Apple Store and have them take a look. Make a Genius bar appointment.

Ever since I upgradeHd to the new software, nothing works like it used to. The iPad is slow, the calendars appear and disappear andi have to re- sync. Does any one knows if a patch is on thevworks?

Ever since I upgraded to the new software, nothing works like it used to. The iPad is slow, the calendars appear and disappear andi have to re- sync. Does any one knows if a patch is on the works to resolve the problems? I know other users are having the same problem.

Back up your iPad. Then restore the iPad to the original factory settings. Then restore from your backup. Things should improve for you.

My navigation bar will only remain in view for one request after using alt key

Everything worked fine for over a year on Mozilla firefox, suddenly I have no navigation or tool bar. If I press the alt key the bar appears and I am able to click on one command and then the bar disapears again. I followed the instructions online and clicked on the restore default bar, to no avail. It is a royal pain to have to alt key to open a new tab from the bookmarks everytime. If I can't figure it out I will have to stop using firefox which until now I was in love with. Please Help

After pressing Alt, in the View menu select Toolbars, then click on "Menu Bar" in the list of toolbars. That should make it permanently display.

Lasso tool problem, using alt key, no click within 5sec causes loss of active window focus

I have been using Photoshop since ver. 4 and have never seen this happen. The only difference is now I'm on Windows 7 64bit. Did not have this problem with XP. Current version CS3 Extended.
Problem: While using Lasso tool with the alt key if I do not make a mouse click in 5 seconds Photoshop's active window loses focus for a split second and then the first point of my selection and the last point will connect. Thus, wasting my time and my attempt at a selection.
I have task bar buttons to "Never combine". I see for that split second what appears to be another program button opening but it is so fast that I cannot see if there is a name on the task bar button. The current Photoshop button moves to the right and back too fast. This all happens very quickly as the window loses focus.
I first thought it was some another program but after many searches found nothing I can identify as the cause.
Right before posting this I had a thought and did a test that concluded in the 5 sec rule. For over a minute I held down the alt key and made a mouse click within the 5 second window of time and there was no loss of window focus. While still holding down the alt key in this same test but not making a mouse click within 5 seconds the window lost focus and the tool stopped with my selection.
I have a wireless Logitech M305 mouse that this morning updated the driver to its current version 5.20.51, Control Center version: 6.20.50.
I have not tested a wired mouse, yet.
Any help would be appreciated. Anyone else seen this? Windows 7 64 bit the culprit?????
Message was edited by: golfnut333

UPDATE
After I removed Photoshop from Norton 360's Administrative Settings_Silent Mode Settings_User-Specified Programs, I did not have the problem with the lasso tool that I first had with loss of window focus. I then put Photoshop back in the 360's settings and the lasso tool still worked, BUT...............
After a couple of days of not using Photoshop and turning computer on and off in that time, I tried Photoshop again and the same problem, it came back. Loss of focus after 5 seconds of not clicking mouse. So, once again I open Norton and took Photoshop out of the User-Specified Programs and the problem went away, no loss of focus.
So, I will see if after a couple of days of turning on and off the computer and NOT putting Photoshop in the Norton's User-Specified Programs setting if the problem stays fixed.
I don't have to have Photoshop in the Norton's setting I just thought that it would be a good idea so Norton didn't try to do any background processes or whatever while I was working in Photoshop or I was rendering a filter or something.
Another thought I also have the Full Screen Detection setting ON. I do use Photoshop in Full Screen mode so maybe when having both the Full Screen mode and User-Specified Programs setting selected it makes something go wacky.
Hope this helps anyone having the same problem I "did". Will post back after a few days to let you know if focus problem is gone.
If it does relieve the problem then I will leave Photoshop off the list in Norton. No sense in trying to fix something that really doesn't matter, really.
UPDATE 2
January 8, 2011, I tried the lasso tool again and it still appears to be working. I did my standard test of holding the alt key and clicking to make selections then not click for 5 seconds or more and I did not lose window focus. I do not know why the Norton 360 setting triggers the loss of focus but since I turned that setting off I'm not having any problem.
Will update again if something changes.
Anyone else out there with the same problem that was solved using this method?
Message was edited by: golfnut333

Using xsl stylesheet with List View Web Part to display custom text

Hi
i have an xsl stylesheet with sharepoint listview webpart. The list view shows some items based on a filter. I want to display custom text such as "No Items" when there are zero items in the list view using the xsl stylesheet. How do i achieve
this. I have spent hours searching but couldnt find the exact answer. Please help me out. I am a light user not a hard core developer so I dont use Visual Studio. Thanks in advance

Hi
I have customised the list view webpart using a custom xsl file by including it in the xsl link of the list view webpart. So i think i need to include the condition in the xsl file itself else it wont work. Since the list view webpart isnt using the default
xsl. Please let me kknow if you have any idea about including a condition in xsl to check if there are not items in view.
The code of the xsl is included below.

<xsl:stylesheet
xmlns:x="http://www.w3.org/2001/XMLSchema"
xmlns:d="http://schemas.microsoft.com/sharepoint/dsp"
version="1.0"
exclude-result-prefixes="xsl msxsl ddwrt"
xmlns:ddwrt="http://schemas.microsoft.com/WebParts/v2/DataView/runtime"
xmlns:asp="http://schemas.microsoft.com/ASPNET/20"
xmlns:__designer="http://schemas.microsoft.com/WebParts/v2/DataView/designer"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:msxsl="urn:schemas-microsoft-com:xslt"
xmlns:SharePoint="Microsoft.SharePoint.WebControls"
xmlns:ddwrt2="urn:frontpage:internal">
<xsl:output method="html" indent="no"/>
<xsl:template match="/" xmlns:x="http://www.w3.org/2001/XMLSchema">
<xsl:variable name="Rows" select="/dsQueryResponse/Rows/Row" />
<table>
<xsl:for-each select="$Rows">
<xsl:call-template name="dvt_1.rowview"></xsl:call-template>
</xsl:for-each>
</table>
</xsl:template>
<xsl:template name="dvt_1.rowview">
<tr>
<td><img height="78" width="60"><xsl:attribute name="src"><xsl:value-of select="@Photo"/></xsl:attribute></img></td>
<td>
<table style="margin-left:10px;">
<tr><td><xsl:value-of select="@FullName"/></td></tr>
<tr><td><xsl:value-of select="@DOBinWords"/></td></tr>
</table>
</td>
</tr>
</xsl:template>
</xsl:stylesheet>

Lost 'mask' (using alt key) in exposure and sharpening?

The black or white 'mask' by using the alt key in exposure adjustments AND the 'mask' while adjusting amount, detail and unsharp mask in sharpening is missing for me. The only difference I can think of is that LR is now on a new notebook (ASUS) and am now working with Windows 7 64-bit. Is there something I can do to re-gain those helpful masks? Any idea what happened? I'm in the middle of nowhere and don't have a lot of wireless time to research . . . Any help or suggestion will be appreciated. Joia

Well guys, everything checks out good - specs are fine and both alt keys work. The touchpad is, however, a big problem and seems to be the culprit. It switches between being hypersensitive (giving me only a quick flash of the mask) or unresponsive (the sliders do not move at all).
We plugged in a mouse and I now have control of both the masks and sliders.
Thanks again for responding - otherwise I probably would have given up for now while we're on the road - got a lot of work to do. Cheers! Joia

Using Alt+Key shortcuts in Chromeless application makes windows beep

Tell me I'm correct about the following:
It is impossible to use mx:MenuBar with mnemonics and/or have 'Ctrl+Alt+Key' appear in the menu as you can with FlexNativeMenu or NativeMenu.
It is impossible to use any Alt+Key shortcuts to activate a control without Windows® beeping at you when you use the key.
It is impossible to use a s:Button or even an mx:Button with an underlined letter without making a specific skin just for that button.
It is impossible to comprehend why such a standard activation method -- using the Alt+Key would be overlooked by a company leading the pack in RIA or any other type of interface development.
So who is on drugs, I hope it is me and not Adobe.
Wait, don't tell me-- you want me to extend your framework so it includes these fundamental things??

After further research, the way to get around alt-key beeping and get rid of the system menu in a chromeless app is to use:
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
and then do some restructuring so your outer client window is now fully transparent and has no skin, and your inner client window is a child who can be moved or sized in its container.
But, this solution does not allow native window states: Minimized, etc. The best you can do is emulate them, but the OS will only see a window that only has one possible state.
Since it has no system/native menu, the OS won't beep on alt+key. I am speaking of windows only, and have no idea what goes on in a Mac environment with this work-around.

Problems with FF orange-tab menu coming down when I use Alt keys

I have had this small issue since yesterday which is more confusing than anything.
When I go to type something, and use the alt keys plus the numbers for designs, the little orange FF tab on the top left-hand corner pulls down the drop-menu, and has 'Files' highlighted, plus it makes my computer make the Windows Default Beep, which I disabled because it was just annoying. I am having no notices of anything causing this, but this looks like the only browser that does it, because I went and played around with IE and Chrome, and nothing happened that I could see or hear of.
Thanks for any insight!

Try to switch on Num Lock if you need to use Alt + number keys.

How to read XSLT list item of a list view web part in SharePoint designer 2010 using jquery

Hi ,
I have a requirement to get data from one list(e.g., A) and display in some other list's(e.g.,B) custom display form(e.g., CustomDispForm.aspx).
Here I am going to do this with the help of Jquery SP Services using GetListItems(). For getting the data I need to pass two parameters from list(B), but the data is like <xsl:value-of select="@testField_"/> .
I have stuck how to pass such variables in Jquery function.
Please let me know how to achieve .
Thanks in Advance.

Follow below code to pass variables to jQuery function in xslt. It will better to use parameters.
<xsl:variable name="varTestFields">
<xsl:value-of select="@TestField_"/>
</xsl:variable>

jQueryFunction('{varTestFields}'
OR

jQueryFunction('{@TestFields_}'
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

Using ALT key in list view doesn't quite work like it used to...

Similar Messages

Maybe you are looking for