Using an ADC and or DVI Monitor with a PC/VGA

Is this possible? I have a piece of test equipment that has a VGA output and I want to run it on one of the older Mac displays with the ADC, or if not a newer monitor with DVI.
Any suggestions?
Thanks
JP

It can be done, but not cheaply.
<http://www.gefen.com/kvm/dproduct.jsp?prod_id=4341>
followed by
<http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MTgyNDg>

Similar Messages

Can I use the thunderbolt monitor and a dell monitor with my macbook pro

can I use the thuderbolt 27" monitor and a dell monitor with my macbook pro at the same time?

Yes, if it's a Thunderbolt computer, but you will need to connect another Thunderbolt device (such as a disk drive) between the displays.

How can I use my Macbook as a dual monitor with my iMac?

How can I use my Macbook as a dual monitor with my iMac?

Then you want to use what's called Target Display Mode.
iMac (Mid 2011)- Target Display Mode does not work with Mini DisplayPort cable
Target Display Mode And Thunderbolt

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?

Is it normal for 10-20% cpu to be used when idle and watching activity monitor?
I have a macbook 6,1, 4gb of ram, and my os seems to be spinning the rainbow quite often and laggy. I watch my activity monitor and it never drops below 90% cpu available. Is this normal? if not what can I do to clean up my os. Does anyone have any resources or help? Thanks

Hello:
Answer - no.
The activity monitor should indicate what is consuming the processor when your system is idle.
I just looked at my own system with Safari running and the usage is about 3%.
Barry

Hi i'm using iphone 4 and i have problem with viber apps while i'm installing

hi i'm using iphone 4 and i have problem with viber apps while i'm installing & registration process its says error on system mainternance. can you please help me out?
thank you.

OK, let's try again. Wind is NOT a supported carrier. In order to use tethering, it must be supported and activated by your carrier for the iPhone. This usually involves an additional fee. You will have to ask your carrier if they can enable it. Odds are, since they are not a supported carrier, they can not. If you want to use tethering, you will most likely have to switch to a supported carrier that offers this feature on the iPhone.
A list of supported carriers can be found here: http://support.apple.com/kb/ht1937

3 DVI monitors with Thunderbolt Mac Mini

Is it possible to have 3 DVI monitors with Thunderbolt Mac Mini?

Maybe.
The first could be via a Mini Displayport to DVI adapter
The second could be via a HDMI to DVI cable
The third would have to be via a Displaylink USB adapter
It should be noted that the AMD powered Mac mini 2011 model will handle this workload better.

Installing photoshop using creative cloud and it comes up with error code 50

installing photoshop using creative cloud and it comes up with error code 50, what is this?

Scannella please see Error Code 50 where this topic has been discussed.

I am trying to use IMAQ acquire and other IMAQ functions with Queue functions.

i am trying to use IMAQ acquire and other IMAQ functions with Queue functions.
i mean i would like to acquire the image in a queue and deque it afterwards. would be the queue function accept the IMAQ data type?

Refer posting, http://exchange.ni.com/servlet/Redirect?id=8879554

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

Hi ..
Shift key boots into Safe Mode, not Recovery.
This only works on a Mac running v10.7 Lion or later.
Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
If you can't boot into Recovery Mode, help here > Mac OS X: Gray screen appears during startup

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

How do you increase font size in Bridge using windows 7 and a 4k monitor? It appears as though this issue has come up previously but there is no answer.

Unfortunately this will require some new programming by Adobe and there's no way to know when that will happen. In the meantime, the only option I think you have available to you is to change your resolution so that your monitor is using fewer pixels per inch.
Kinda blows the whole value of the newer monitor but I suppose you can switch back and forth from low res when you are working in Bridge to high res when you are working in PS.
Sorry, but for the time being, that's about it.
Best,
Gary

Is it possible to buy an iPhone 4s unlocked in the US, and then use it normally and completely in France with Freemobile ?

Is it possible to buy an iPhone 4s unlocked in the US, and then use it normally and completely into France with Freemobile (which provides micro-SIM) ?
I'm travelling to NYC tomorrow and that would be 100€ less than in France...

Thank you for the quick answer
Do you mean that I can't reserve and pick up my phone in the local apple store as it's explained on the site (http://www.apple.com/retail/iphone/) ?
What about the social security number asked in the formulary ? I've got a French one...
Puzzled...

I just bought a used iphone 5 and i am stuck with the icloud page because the old owner dont remember his password what should i do ?

i just bought a used iphone 5 and i am stuck with the icloud page because the old owner don't remember his password what should i do ?

Ask him for your money back.
Pete

2 DVI monitors with G5 (1 ADC and 1 DVI port)

I have 2 Apple monitors with DVI connectors and a G5 with 1 DVI and 1 ADC port.
I have just bought a "DVI to ADC Adapter" but it looks backwards (for connecting an ADC monitor to a DVI port).
What can I do?

Hi-
You need an ADC to DVI adapter, like this. The description is very dated, but, this is what is needed to connect a DVI monitor to an ADC graphics port. This is another one.
So, you bought something like this?

Mixing VGA and DVI monitors with 5770

Hi everyone,
I've seen the Apple articles and the forum posts about this, but before I need to check my configuration will work before it has to be used on a show at work (the MP is running screens in a venue). I've seen lots of scenarios with people using all DVI monitors or all VGA, but can't find any examples where they are mixed.
Here is my proposed setup:
DVI output - 800 x 600 - First device (DVI input only)
Mini Display Port 1 - also 800 x 600 - Second device (DVI/VGA input but strongly prefer to use DVI) via Mini Display Port -> DVI adapter (passive?)
Mini Display Port 2 - 1376 x 7?? - Monitor running the UI (VGA input) via Mini Display Port -> VGA adapter (active?)
My worry is that there is only one active adapter in the system?
If this won't work, I have two backup plans, which I would also like to know if it will work or not, please. One of the DVI devices has a buffered DVI link out, so I could use that to feed the other DVI device.
So Backup plan 1:
DVI output - 800 x 600 - DVI in of first device
Mini Display Port 1 - 1376 x 7?? - Monitor running the UI (VGA input) via Mini Display Port -> VGA adapter (active?)
MDP 2 not used.
Backup plan 2:
DVI output - 800 x 600 - DVI in of first device
Mini Display Port 1 - also 800 x 600 - Second device, VGA input via Mini Display Port -> VGA adapter
Mini Display Port 2 - 1376 x 7?? - Monitor running the UI (VGA input) via Mini Display Port -> VGA adapter
Phew, sorry for the essay everyone. Been a long day of trying to research all of this...
Thanks in advance.

Obviously backup plan 1 is no problem with only two monitors connected.
You have a relatively easy set of conditions. Two of your monitors are single link DVI (resolutions less than 1920 x 1200). One is vga. So a mini-displayport (mDP) to VGA counts as one active adapter and all you need is a a mini-displayport to single linke DVI active adapter for one of the others.
If you look at AMD Eyefinity Validated Dongles chart you would find that a Accell B087B-006B qualifies as an mini-displayport to single link DVI active adapter.
So a possible setup would be:
DVI --> 800 x 600 DVI display #1
mDP --> B087B-006B --> 800 x 600 DVI display #2
mDP --> VGA adapter --> 1376 x 7?? display #3

Can I extend a MBP 15" to mac display and another DVI monitor

Hi,
I have a MBP 15" and I currently use mac display as my external monitor for my MBP via Thunderbolt. Can I also extend it to another monitor with DVI ? Is there any converters that can do that for me.
Thanks

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010 before ThunderBolt. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Using an ADC and or DVI Monitor with a PC/VGA

Similar Messages

Maybe you are looking for