Using an another drive besides the c drive for itunes

i have a computer with a 4 terabyte level 5 raid system on it. i want to store all of my itunes on my media storage rather than using the C drive as there is not enough room on it. i am not smart enough to figure out how to do this. please help

Move your entire iTunes library to new location and point iTunes to that location (itunes > preferences > Gerneral)
http://support.apple.com/kb/HT1364

Similar Messages

Greeting, I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the in

Greeting,
I want to reformat my external hard drive using Mac OS Extended (Journaled, Encrypted ) but before formatting it, I want to make sure that if I loose the hard drive or the hard drive get stolen, no one will be able to retrieve or recover the information on it so could you tell me what kind of encryption will be used or is there any way to recover the information?
Thanks!

I think FileVault is used to encryp internal hard drive but I wanna encrypt an external hard drive with Mac OS Extended Journaled Encrypted which is completely different!

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive?

I have a new MAcBook Air and my photos don't fit on the internal hard drive. I want to store my photos on an external hard drive which I will connect to my Air when using Iphoto. How do I set an external hard drive as the default drive in Iphoto?

Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but i

I just bought a MBA and I need to move my photos and itunes to an external hard drive (from my old MacBook Pro) because they won't fit on the Air. I got the photos moved fine and I followed an online tutorial to move the necessary files for itunes, but it didn't work. The files copied fine, but when I tell iTunes on the Air to look at the external drive for the library, it doesn't find anything. What I copied was the entire iTunes Media folder. So, how do I move the necessary iTunes files from my old Pro to a external drive so I can access them from my new Air? Whew!

iTunes- How to move the library to an EHD
After you move the library you need to open iTunes by first depressing the OPTION key then launching iTunes. You will be given a choice of which library to use. This can then be made a permanent change, if you wish, in the Advanced section of iTunes preferences.

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

My MacBook Pro is not recognizing my external hard drive. The hard drive is listed in disk utilities but an icon does not pop up and I cannot access the data. Is there any way to resolve this?

WE know Disk Warrior is more reliable, hence more useful, and should be in any disk mechanics toolchest.
For the record, I don't know anything of the kind. I have yet to see evidence that Disk Warrior is useful at all.
What I do know is that you seem to take every opportunity you get to promote it in these forums. Do you work for Alsoft?
Let me be a little more explicit. My opinion is that Disk Warrior is a waste of money if one has backups. If a journaled HFS directory is so badly corrupted that it can't be repaired by Disk Utility, then the volume should be reformatted and restored from backup, which has the same effect as running DW, but is probably faster and doesn't cost $99.

I had all my iTunes music backed up onto a hard drive; but the hard drive was stolen along with all the files I backed up onto it. However, the songs I had in iTunes still show up (I just can't play them.) Would it let me get them back?

I had all my iTunes music backed up onto a hard drive; but the hard drive was stolen along with all the files I backed up onto it. However, the songs I had in iTunes still show up (I just can't play them.) If I were to use iCloud, would it still take those songs and let me listen to them (and maybe re-download them?) Or am I out of luck?

Open iTunes, go to the iTunes Store, and then go to Purchased on the right hand side under Music Quick Links.
You can re-download all the songs, apps, or books you have previously purchased.
I'm not sure if this is a requirement, but just in case, make sure you download the latest version of iTunes (v10.3) too.

Adding a new Hard Drive in the Zip Drive Bay

Today, I was looking inside my power mac 466 Digital Audio, and I realized that it appeared that a third hard drive could fit into the Zip Drive bay. I has a spare HD and Zip drive lying around, and I realized that they are the same height and width. I know that they use the same connectors (on some dells, the zip drive is plugged in with the HD 2 connector), so is it possible to connect a third hard drive in the Zip bay. In the powermac manual, apple doesn't say that you can, but is it possible, and if it is possible, is it harmful to the computer?

Those particular PowerMacs have two IDE controllers with master/slave setups. One IDE controller is for the optical and Zip drives and the other is for hard drives. You can have two IDE hard drives on the double sled in the back of the PowerMac. You can have a single hard drive each on the middle and front sleds also, but you'll need a separate PCI controller for those drives. That would give you four hard drives without doing anything contrary to Apple's original design. You can put a pair of 120GB IDE hard drives on the double sled and built in IDE controller in the back and then put a pair of 1.5TB SATA drives on the middle and front sleds hooked to a PCI SATA controller. If you need more than that you've still got FireWire and Gigabit Ethernet external storage... What are you doing that needs that much storage anyway? Can't you just burn stuff to CD or DVD and get it off your hard drive(s)? I do video encoding for a TV network and I really don't use much hard drive space. I burn my finished work onto CD or DVD and then delete it off my hard drives.

Which drive is the boot drive?

I installed a 2nd hard drive in my G4 dual 1ghz sometime around 2001. I'm now on a G5 and would like to pull the 2nd drive from the G4 and put it in a firewire enclosure to use with the G5. How can I tell which drive is the boot drive and which is the secondary drive? I kind of remember that the 2nd drive went in the lower bay but I'm not 100% sure. Any other caveats to pulling out this drive? Thanks in advance.
Power Mac dual 1ghz

The system profiler should tell you the serial number of the hard drive, or type of hard drive when you select it in the IDE bus. Compare that with the label on the drive itself.
Both bays can have boot drives, though typically master jumper drives are better able to boot than slaves on certain operating systems.
You can tell the existing boot drive, because it is the first drive that appears in the upper right hand corner of the desktop if you view and arrange the desktop by kind.
If you just want to transfer data over from a G4 to a G5, you may want to use Target Disk Mode:
http://docs.info.apple.com/article.html?artnum=58583
Note, if the G4 is the kind that can boot into Mac OS 9, set it as the Target machine. In addition, if it is running 10.2.2 or earlier it should be the target machine, because 10.2.2 and earlier don't understand the Journaled operating system which may be installed on your G5.

Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas?

Why won't my Intel iMac boot up, either from the internal hard drive or the DVD drive? It just displays a light grey screen, without any other icons, etc. The fact that it won't boot from the original system DVD is what baffles me the most. Any ideas? It uses the latest version of Mavericks. Thanks!

If the C key for Install Disc or R Command for OS X Recovery startup commands are not working, try holding the Option key for the Startup Manager.
see > Startup Manager: How to select a startup volume
If that does not work and you using a wireless keyboard, it may have become unpaired and you need to dig up a USB keyboard to invoke the startup commands.
For more on gray screen, see > Mac OS X: Gray screen appears during startup

TS1393 I cannot eject my iPod using either itunes or the eject button on bottom tool bar beacuse it says something is in use by another application or "The device 'generic volume' cannot be stopped because a program is still accessing it" Synced new iPad

How can I eject my ipod when neither itunes not the "safe to eject" button will allow it. Itunes says "...cannot be ejected because it contains files that are in use by another application." The safe to eject button says "The device 'generic volume' cannot be stopped because a program is still accessing it." The has never happened before. The only thing new is that I added an iPad yesterday. Thanks.

Go to your computer's System Tray and try ejecting. If you can't eject, there is an application that is trying to access your iPod.
Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
Note that this is a good, general process any time you can't access any file.
In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time.

I moved my music from the c drive to the d drive. All of my music is in itunes but my ipod won't sync with itunes. The syncing process is taking much longer than usual too. I left my ipod over night to sync and it didnt finish. Fails to sync every time. I tried to restore my ipod and it didnt help.

Ignore. I figured it out:)

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

I loaded Mountain Lion and now my Canon Canoscan LIDE100 Scanner won't work. I reloaded the application, checked the Cannon website for the correct driver & loaded the Canon driver for Mountain Lion. Aplication starts to load then hangs up on 80% complete. Any suggestions?

Might have a hardware issue that was caused by the minor liquid spill.
Take it to Apple to have them look at it. I think they do a free diagnostics. That way you can find out what's wrong with your MB.
Good luck....Hope you get it sorted out.

I cant use facetime. but my sister can. we share the same account for itunes.but when i go to face itme and click on create a new account a blank screen pops up. what do i do?when i go to make a new facetime account nothing comes up

i cant use facetime. but my sister can. we share the same account for itunes.but when i go to facetime on my ipod touch and click on create a new account a blank screen pops up and the only thing it says is cancel and account. what do i do?

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Quit and relaunch Mail, and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Do I need to use a voltage adapter in the U.S. for my European Macbook?

do I need to use a voltage adapter in the U.S. for my European Macbook?

If using the Apple supplied charger unit, you will simply need a plug adapter for the US power system.

Using an another drive besides the c drive for itunes

Similar Messages

Maybe you are looking for