Using an ASA 5505 as a Certificate Authority and Distribution Point?
I had a question about the limitations of an ASA 5505 and using it as CA. The setup would be as follows:
2 ASA 5520's in set up for high availability failover.
1 ASA set up with a local CA server.
If I had to set up VPN to connect to an interface on the ASA 5520's and wanted to require certificates as a secondary authentication could they use an ASA 5505 as a CA to retrieve and verify stored certificates? The issue I ran in to was not being able to set up a local CA server on the failover pair and was hoping to use an ASA 5505 with a local CA server to act as a distribution point. I have been researching various configurations similar to this but have not found definitive information if it is even possible.
If someone could verify if this is even possible and / or point me in the right direction it would be greatly appreciated.
Thank you,
Rick
You can only create self signed certificates using the ASA, or import a identity certificate from a 3rd party CA. The ASA unfortunately can only issue user certificates to users or PCs via downloading from a website, they cannot complete CSR requests.
Similar Messages
-
CA Certificate Authority CRL Distribution Points hel
Hello,
I am far from an SSL certficate expert but I generally understand how everything works since we have to manually re-key the servers yearly....Hi Jozef,
Thank you for your reply.
The file CAPolicy.inf should be located in %windir% folder.
Based on my research, the properties of the new CA certificate are generated by the information in the old CA certificate, if CAPolicy.inf does not exist. Therefore, the CDP extension of the new CA certificate still has the old URL.
To correct the CDP extension of the root CA certificate, you need to create a CAPolicy.inf file, edit the CAPolicy.inf file to contain the required URL in the CRLDistributionPoint section, such as:
[CRLDistributionPoint]
URL= “ldap:///CN=Ad!002fArt%20Slovakia%20CA,CN= EDGE,CN=CDP,CN=Public%20Key%20Services,CN=Services,CN=Configuration,DC=ADART,DC=LOCAL?certificateRevocationList?base?objectClass=cRLDistributionPoint”
URL= “http:// edge.adart.local/CertEnroll/Ad!002fArt%20Slovakia%20CA.crl”
And then, save the file in the %systemroot% folder, and renew CA certificate. After that, you should see the correct URLs in the CDP extension of the new CA certificate.
For more information about CAPolicy.inf, please refer to the following articles:
How CA Certificates Work
http://technet.microsoft.com/en-us/library/cc737264(WS.10).aspx
CAPolicy.inf Syntax
http://technet.microsoft.com/en-us/library/cc728279(WS.10).aspx -
Dear All,
I'm using Cisco ASA 5505 Firewall and I want the email alert from my Firewall if the CPU increase more than 70 %. Is it possible, Please help me.
Thanks
VijayHi Vijay,
If can be done but you need any network management software. I personally dont think you can ask your ask to send mails. ASA can trigger alert to a SNMP configured server which will intern send mail to you
HTH, -
How to create certificate authority and configure it for IIS
Hi
I Install ADCS role in Server 2012 and configure it. but when i go to IIS and want to create domain certification , the select button is grey .i think i couldn't configure certificate authority correctly. how can fix this problem.
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook:Thanks my problem was solved.
But there is a problem after install IIS and ADCS , i restarted both server but didn't work ,but now(6 hours after restart) it work fine.
another Question is after i select appropriate certificate authority ,when i click on finish it gives me the following error
"the certificate request was submitted to the online authority but was not issued the request was denied"
Whenever you see a helpful reply, click on Vote As Helpful & click on
Mark As Answer if a post answers your question.
LinkedIn:
Facebook: -
Certificate Authority and server certitifcate .
Friends,
I wish to create a Self signed certificate (CA ) and a server certificate using java .
Can anybody please help me or guide me to a relevant document ?
Thnaks in advance .
regards,
Dhiraj ShettyI wish to create a Self signed certificate (CA )This is a contradiction in terms. If you just want a self-signed certificate, you can generate it with the keytool. If you want one signed by a CA you still have to start by generating a certificate request with the keytool as described in the Javadoc/Guide to Features/Security/JSSE Reference Guide and then send the certificate request to a CA.
and a server certificateSee above. I don't know what 'and' means here. You only need one certificate.
using javaNot using Java as defined by the JDK. Maybe Bouncy Castle can do it in Java code.
Can anybody please help me or guide me to a relevant document ? See above. -
Cisco ASA 5505 Cannot ping local traffic and local hosts cannot get out
I have, what I believe to be, a simple issue - I must be missing something.
Site to Site VPN with Cisco ASA's. VPN is up, and remote hosts can ping the inside int of ASA (10.51.253.209).
There is a PC (10.51.253.210) plugged into e0/1.
I know the PC is configured correctly with Windows firewall tuned off.
The PC cannot get to the ouside world, and the ASA cannot ping 10.51.253.210.
I have seen this before, and I deleted VLAN 1, recreated it, and I could ping the local host without issue.
Basically, the VPN is up and running but PC 10.51.253.210 cannot get out.
Any ideas? Sanitized Config is below. Thanks !
ASA Version 7.2(4)
hostname *****
domain-name *****
enable password N7FecZuSHJlVZC2P encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Vlan1
nameif Inside
security-level 100
ip address 10.51.253.209 255.255.255.248
interface Vlan2
nameif Outside
security-level 0
ip address ***** 255.255.255.248
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
shutdown
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
shutdown
ftp mode passive
dns server-group DefaultDNS
domain-name *****
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list No_NAT extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.7.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.10.250
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.200
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.1.3.9
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.14
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.15
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 host 10.10.10.16
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.1.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 10.10.9.0 255.255.255.0
access-list Outside_VPN extended permit ip 10.51.253.208 255.255.255.248 ***** 255.255.255.240
pager lines 24
mtu Outside 1500
mtu Inside
icmp unreachable rate-limit 1 burst-size 1
icmp permit any Outside
no asdm history enable
arp timeout 14400
global (Outside) 1 interface
nat (Inside) 0 access-list No_NAT
route Outside 0.0.0.0 0.0.0.0 ***** 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
aaa authentication enable console LOCAL
aaa authentication serial console LOCAL
aaa authentication ssh console LOCAL
http server enable
no snmp-server location
no snmp-server contact
snmp-server community *****
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set DPS_Set esp-3des esp-md5-hmac
crypto map DPS_Map 10 match address Outside_VPN
crypto map DPS_Map 10 set peer *****
crypto map DPS_Map 10 set transform-set *****
crypto map DPS_Map interface Outside
crypto isakmp enable Outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 28800
crypto isakmp policy 65535
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh 0.0.0.0 0.0.0.0 Outside
ssh timeout 60
console timeout 0
management-access Inside
username test password P4ttSyrm33SV8TYp encrypted
tunnel-group ***** type ipsec-l2l
tunnel-group ***** ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:8d0adca63eab6c6c738cc4ab432f609d
: end
1500Hi Martin,
Which way you are trying. Sending traffic via site to site is not working or traffic which you generate to outside world is not working?
But you say ASA connected interface to PC itself is not pinging that is strange. But try setting up the specific rules for the outgoing connection and check. Instead of not having any ACL.
If it is outside world the you may need to check on the NAT rules which is not correct.
If it is site to site then you may need to check few other things.
Please do rate for the helpful posts.
By
Karthik -
I am having a application in Visual Studio 2003 on Windows XP , Now I am Migrating the application in Visual Studio 2005 on Windows-7 .
In my Development PC , I was install Measurement Studio 2009 , NI DAQ 7.01 and Field Point 6.05.
my application is Showing following error:
Linking...
LINK : fatal error LNK1104: cannot open file 'NiFieldPoint71D.lib'
Build log was saved at "file://c:\EdacsNt\Source\SaftyServices\NICfpDAQDl?l\Debug\BuildLog.htm"
NICfpDAQDll - 1 error(s), 0 warning(s)
When I copy from NiFieldPoint71D.lib library from Measurement Studio 7.1 and put in :\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib.
my application is Showing following error:
1>Linking...
1>atlsd.lib(atltrace.obj) : error LNK2005: "unsigned int (__stdcall* ATL::g_pfnGetThreadACP)(void)" (?g_pfnGetThreadACP@ATL@@3P6GIXZA) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1>atlsd.lib(atlbase.obj) : error LNK2005: "class ATL::CAtlWinModule ATL::_AtlWinModule" (?_AtlWinModule@ATL@@3VCAtlWinModule@1@A) already defined in NiFieldPoint71D.lib(StdAfx.obj)
1> Creating library ..\..\lib\debug\NICfpDAQDll.lib and object ..\..\lib\debug\NICfpDAQDll.exp
1>..\..\bin\debug\NICfpDAQDll.dll : fatal error LNK1169: one or more multiply defined symbols found
I want to ignore NiFieldPoint71D.lib from using project setting(Linker->Input->ignore Specific Library ) but still it is showing same error.
In the project Setting I am done following setting:
"C:\Program Files\National Instruments\MeasurementStudioVS2005\VCNET\Lib";"
C:\Program Files\National Instruments\NI-DAQ\Lib"
Linker->Input->ignore Specific Library: mfcs71d.lib;libc.lib;'NiFieldPoint71D.lib
Please provide some solution.
Thanks
NityanandYou posted this in the LabVIEW forum.
Are you programming in LabVIEW?
There is a separate Measurement Studio for VC++ forum. http://forums.ni.com/t5/Measurement-Studio-for-VC/bd-p/231 -
ASA 5505 VPN Group Policies (RADIUS) and tunnel group
I have a single ASA firewall protecting a small private developing network, and I need it in order to access remotely to two distinct network spaces both of wich are VLAN tagged: 1 is LAN and 3 is management. Each net has its own IP address space and DNS server.
I'd like to set up Anyconnect to land on lan 1, and SSL VPN in order to see the IPMI and management websites sitting on VLAN 3. In order to make things "safer" I have found a free OTP solution, OpenOTP, and I decided to implement it on a virtual machine, setting up a radius bridge to allow user authentication for VPN. I can pass wichever attribute I'd like to using this radius bridge (for example "Class" or "Group-Policy" or whatever is included in the radius dictionaries).
Actually all I need is quite simple. I have to segregate my remote users in 2 groups, one for Anyconnect, and one for SSL based on the radius response from authentication. (I don't need authorization nor accounting) I'm no Cisco Pro, what I've learnt is based on direct "on the field" experience.
I'm using two radius users for testing right now, one is called "kaisaron78" associated to a group policy "RemoteAC" and a second one called "manintra" associated to a group policy called "SSLPolicy". "kaisaron78" after logging in should only see the Anyconnect "deployment portal", while "manintra" should see the webvpn portal populated with the links specified in the URL list "Management_List". However, no matter what I do, I only see the default "clean" webvpn page. This is an example of "sh vpn-sessiondb webvpn" for both users..
Session Type: WebVPN
Username : kaisaron78 Index : 1
Public IP : 172.16.0.3
Protocol : Clientless
License : AnyConnect Premium
Encryption : Clientless: (1)RC4 Hashing : Clientless: (1)SHA1
Bytes Tx : 518483 Bytes Rx : 37549
Group Policy : RemoteAC Tunnel Group : DefaultWEBVPNGroup
Login Time : 10:59:33 CEDT Mon Aug 18 2014
Duration : 0h:00m:23s
Inactivity : 0h:00m:00s
VLAN Mapping : N/A VLAN : none
Audt Sess ID : c0a801fa0000100053f1c075
Security Grp : none
Asa5505# sh vpn-sessiondb webvpn
Session Type: WebVPN
Username : manintra Index : 2
Public IP : 172.16.0.3
Protocol : Clientless
License : AnyConnect Premium
Encryption : Clientless: (1)RC4 Hashing : Clientless: (1)SHA1
Bytes Tx : 238914 Bytes Rx : 10736
Group Policy : SSLPolicy Tunnel Group : DefaultWEBVPNGroup
Login Time : 11:01:02 CEDT Mon Aug 18 2014
Duration : 0h:00m:05s
Inactivity : 0h:00m:00s
VLAN Mapping : N/A VLAN : none
Audt Sess ID : c0a801fa0000200053f1c0ce
Security Grp : none
As you can see, it seems like the policies are assigned correctly by radius attribute Group-Policy. However, for example you'll notice no vlan mapping, even if I have declared them explicit in group policies themselves. This is the webvpn section of the CLI script I used to setup remote access.
! ADDRESS POOLS AND NAT
names
ip local pool AnyConnect_Pool 192.168.10.1-192.168.10.20 mask 255.255.255.0
object network NETWORK_OBJ_192.168.10.0_27
subnet 192.168.10.0 255.255.255.224
access-list Split_Tunnel_Anyconnect standard permit 192.168.1.0 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.10.0_27 NETWORK_OBJ_192.168.10.0_27 no-proxy-arp route-lookup
! RADIUS SETUP
aaa-server OpenOTP protocol radius
aaa-server OpenOTP (inside) host 192.168.1.8
key ******
authentication-port 1812
accounting-port 1814
radius-common-pw ******
acl-netmask-convert auto-detect
webvpn
port 10443
enable outside
dtls port 10443
anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 1
anyconnect profiles AnyConnect_Profile_client_profile disk0:/AnyConnect_Profile_client_profile.xml
anyconnect enable
! LOCAL POLICIES
group-policy SSLPolicy internal
group-policy SSLPolicy attributes
vpn-tunnel-protocol ssl-clientless
vlan 3
dns-server value 10.5.1.5
default-domain value management.local
webvpn
url-list value Management_List
group-policy RemoteAC internal
group-policy RemoteAC attributes
vpn-tunnel-protocol ikev2 ssl-client
vlan 1
address-pools value AnyConnect_Pool
dns-server value 192.168.1.4
split-tunnel-policy tunnelspecified
split-tunnel-network-list value Split_Tunnel_Anyconnect
default-domain value home.local
webvpn
anyconnect profiles value AnyConnect_Profile_client_profile type user
group-policy SSLLockdown internal
group-policy SSLLockdown attributes
vpn-simultaneous-logins 0
! DEFAULT TUNNEL
tunnel-group DefaultRAGroup general-attributes
authentication-server-group OpenOTP
tunnel-group DefaultWEBVPNGroup general-attributes
authentication-server-group OpenOTP
tunnel-group VPN_Tunnel type remote-access
tunnel-group VPN_Tunnel general-attributes
authentication-server-group OpenOTP
default-group-policy SSLLockdown
!END
I had to set up DefaultWEBVPNGroup and RAGroup that way otherwise I couldn't authenticate using radius (login failed every time). Seems like in ASDM the VPN_Tunnel isn't assigned to AnyConnect nor to Clientless VPN client profiles. Do I have to disable both default tunnel groups and set VPN_Tunnel as default on both connections in ASDM ? I know I'm doing something wrong but I can't see where the problem is. I'm struggling since may the 2nd on this, and I really need to finish setting this up ASAP!!!!
Any help will be more than appreciated.
Cesare GiulianiOk, it makes sense.
Last question then I'll try and report any success / failure. In this Cisco webpage, http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_config/ref_extserver.html#wp1661512 there's a list of supported radius attributes. Actually I'm using number 25 Group-Policy, in order to get the correct group policy assigned to users. I see, in that list an attribute 146 Tunnel-Group-Name. Will it work out for the purpose you explained in the previous post ? I mean, if I set up two tunnel groups instead of 1, 1 for anyconnect with its own alias and its own url, and 1 for SSL VPN again with its own alias and url, do you think that using that attribute will place my users logging in into the correct tunnel group ?
Thank you again for your precious and kind help, and for your patience as well!
Cesare Giuliani -
Certificate authority and certificate.
Hi everybody
Please consider the following example:
R1------------------------CA---------------------------R2
We want R1 to get the certificate from Ca so R1 can use it to authenticate itself to R2. Similarly R2 wants to get its own certificate so it can authenticate itself to R1.
Both routers are configured to trust CA.
Before CA can issue certificates to R1 and R2 which they can use to authenticate each other, CA sends its own certificate which has its own (CA) public key, and CA signature. The video lecture I was watching says CA creates this signature , encrypts its own private key and attaches it to the certificate.
When R1 receives this certificate, R1 uses CA's public key to decrypt it.
In order for R1 to prove that certificate did come from CA not some impostor, It should know what was the signature before it was encrypted by CA using its private key and sending it to R1 ,so when R1 receives it and decrypts it with CA's public key it will be to compare and thus can be sure Certificate came from legit CA.
The question is how does R1 know the signature prior to receiving certificate from CA?
Thanks and have a great day.A certificate signature is created by applying a hash algorithm over the certificate contents , then encrypting the resulted hash. so for R1 to know and verify the signature, it computes the hash of the received certificate (by a hash algorithm mentioned in the cert) , decrypt the signature, then compares both computed hash and decrypted signature which must be equal.
Hope this helps.
Regards.
Mashal Alshboul -
Half second delay using pen tool. Lag between mouse up and when point appears on screen
Regarding the pen tool, using Photoshop CC 2014.2.2 on a PC— There is a half second delay between the moment I click the mouse and when the path point shows up. I've disabled the tablet input service on my computer, which worked, after a restart, but eventually this delay starts happens again. This is immensely inconvenient and I need a permanent solution. If anyone has any sort of answer please tell me. I will try anything.
I am experiencing the same problem. It's very annoying! The issue comes and goes... some days it works like it should, some days it's lagging. I couldnt figure out why so far, neither could the adobe support via chat...
Here's a video showing the issue. Make sure to watch in 720p and turn on the volume, so you can hear when I click.
ps cc pen tool - YouTube -
ASA 5505 version 9.1(4) NAT issue
Hi,
I am using ASA 5505 version 9.1(4) and using dynamic NAT command to NAT(PAT) inside subnet 192.168.3.0/24 with outside interface 192.168.100.2/24
But unable to ping from inside host to internet or router interface 192.168.100.1 . Please suggest the show running is mentioned below.
Following is the logical diagram
192.168.100.1/24 192.168.100.2/24 192.168.3.1
Internet(ISP) ------------------->------------------ Router------------------------->(e0/0) ASA 5505 (9.1) eth0/4 ----- ---------- Host (192.168.3.22)
ASA Version 9.1(4)
hostname ciscoasa
enable password 2KFQnbNIdI.2KYOU encrypted
xlate per-session permit tcp any4 any4
xlate per-session permit udp any4 any4
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ciscoasa(config)# object network Generic_All_Network
ciscoasa(config-network-object)# sub
ciscoasa(config-network-object)# subnet 0.0.0.0 0.0.0.0
ciscoasa(config-network-object)# ex
ciscoasa(config)# nat (inside,outside) source dynamic Generic_All_Network inte$
ciscoasa(config)#
ciscoasa(config)#
ciscoasa(config)# wr
Building configuration...
Cryptochecksum: fe5175c6 25dfd45a 117bd6e3 867486db
3211 bytes copied in 1.120 secs (3211 bytes/sec)
[OK]
ciscoasa(config)# sh run
: Saved
ASA Version 9.1(4)
hostname ciscoasa
enable password 2KFQnbNIdI.2KYOU encrypted
xlate per-session permit tcp any4 any4
xlate per-session permit udp any4 any4
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.3.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 192.168.100.2 255.255.255.0
ftp mode passive
object network inside_hosts
subnet 192.168.3.0 255.255.255.0
object network Generic_All_Network
subnet 0.0.0.0 0.0.0.0
access-list inbound extended permit ip any any
access-list inbound extended permit icmp any4 any4
access-list inside_access_in extended permit ip 192.168.3.0 255.255.255.0 any
pager lines 24
logging enable
logging asdm informational
mtu outside 1500
mtu inside 1500
ip verify reverse-path interface outside
ip verify reverse-path interface inside
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
arp permit-nonconnected
nat (inside,outside) source dynamic Generic_All_Network interface
object network inside_hosts
nat (inside,outside) dynamic interface
access-group inbound in interface outside
access-group inside_access_in in interface inside
route outside 0.0.0.0 0.0.0.0 192.168.100.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.3.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpool policy
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous prompt 2
Cryptochecksum:fe5175c625dfd45a117bd6e3867486db
: endyep I have already removed nat (inside,outside) source dynamic Generic_All_Network interface
Following is the latest show-running
ciscoasa(config)# sh run
: Saved
ASA Version 9.1(4)
hostname ciscoasa
enable password 2KFQnbNIdI.2KYOU encrypted
xlate per-session permit tcp any4 any4
xlate per-session permit udp any4 any4
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.3.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 192.168.100.2 255.255.255.0
ftp mode passive
object network inside_hosts
subnet 192.168.3.0 255.255.255.0
access-list inbound extended permit ip any any
access-list inbound extended permit icmp any4 any4
access-list inside_access_in extended permit ip 192.168.3.0 255.255.255.0 any
access-list capi extended permit ip host 192.168.3.22 host 192.168.100.1
access-list capi extended permit ip host 192.168.100.1 host 192.168.3.22
access-list capo extended permit ip host 192.168.100.2 any
access-list capo extended permit ip any host 192.168.100.2
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip verify reverse-path interface inside
ip verify reverse-path interface outside
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
arp permit-nonconnected
object network inside_hosts
nat (inside,outside) dynamic interface
access-group inside_access_in in interface inside
access-group inbound in interface outside
route outside 0.0.0.0 0.0.0.0 192.168.100.1 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.3.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec security-association pmtu-aging infinite
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca trustpool policy
crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca 6ecc7aa5a7032009b8cebcf4e952d491
308205ec 308204d4 a0030201 0202106e cc7aa5a7 032009b8 cebcf4e9 52d49130
0d06092a 864886f7 0d010105 05003081 ca310b30 09060355 04061302 55533117
30150603 55040a13 0e566572 69536967 6e2c2049 6e632e31 1f301d06 0355040b
13165665 72695369 676e2054 72757374 204e6574 776f726b 313a3038 06035504
0b133128 63292032 30303620 56657269 5369676e 2c20496e 632e202d 20466f72
20617574 686f7269 7a656420 75736520 6f6e6c79 31453043 06035504 03133c56
65726953 69676e20 436c6173 73203320 5075626c 69632050 72696d61 72792043
65727469 66696361 74696f6e 20417574 686f7269 7479202d 20473530 1e170d31
30303230 38303030 3030305a 170d3230 30323037 32333539 35395a30 81b5310b
30090603 55040613 02555331 17301506 0355040a 130e5665 72695369 676e2c20
496e632e 311f301d 06035504 0b131656 65726953 69676e20 54727573 74204e65
74776f72 6b313b30 39060355 040b1332 5465726d 73206f66 20757365 20617420
68747470 733a2f2f 7777772e 76657269 7369676e 2e636f6d 2f727061 20286329
3130312f 302d0603 55040313 26566572 69536967 6e20436c 61737320 33205365
63757265 20536572 76657220 4341202d 20473330 82012230 0d06092a 864886f7
0d010101 05000382 010f0030 82010a02 82010100 b187841f c20c45f5 bcab2597
a7ada23e 9cbaf6c1 39b88bca c2ac56c6 e5bb658e 444f4dce 6fed094a d4af4e10
9c688b2e 957b899b 13cae234 34c1f35b f3497b62 83488174 d188786c 0253f9bc
7f432657 5833833b 330a17b0 d04e9124 ad867d64 12dc744a 34a11d0a ea961d0b
15fca34b 3bce6388 d0f82d0c 948610ca b69a3dca eb379c00 48358629 5078e845
63cd1941 4ff595ec 7b98d4c4 71b350be 28b38fa0 b9539cf5 ca2c23a9 fd1406e8
18b49ae8 3c6e81fd e4cd3536 b351d369 ec12ba56 6e6f9b57 c58b14e7 0ec79ced
4a546ac9 4dc5bf11 b1ae1c67 81cb4455 33997f24 9b3f5345 7f861af3 3cfa6d7f
81f5b84a d3f58537 1cb5a6d0 09e4187b 384efa0f 02030100 01a38201 df308201
db303406 082b0601 05050701 01042830 26302406 082b0601 05050730 01861868
7474703a 2f2f6f63 73702e76 65726973 69676e2e 636f6d30 12060355 1d130101
ff040830 060101ff 02010030 70060355 1d200469 30673065 060b6086 480186f8
45010717 03305630 2806082b 06010505 07020116 1c687474 70733a2f 2f777777
2e766572 69736967 6e2e636f 6d2f6370 73302a06 082b0601 05050702 02301e1a
1c687474 70733a2f 2f777777 2e766572 69736967 6e2e636f 6d2f7270 61303406
03551d1f 042d302b 3029a027 a0258623 68747470 3a2f2f63 726c2e76 65726973
69676e2e 636f6d2f 70636133 2d67352e 63726c30 0e060355 1d0f0101 ff040403
02010630 6d06082b 06010505 07010c04 61305fa1 5da05b30 59305730 55160969
6d616765 2f676966 3021301f 30070605 2b0e0302 1a04148f e5d31a86 ac8d8e6b
c3cf806a d448182c 7b192e30 25162368 7474703a 2f2f6c6f 676f2e76 65726973
69676e2e 636f6d2f 76736c6f 676f2e67 69663028 0603551d 11042130 1fa41d30
1b311930 17060355 04031310 56657269 5369676e 4d504b49 2d322d36 301d0603
551d0e04 1604140d 445c1653 44c1827e 1d20ab25 f40163d8 be79a530 1f060355
1d230418 30168014 7fd365a7 c2ddecbb f03009f3 4339fa02 af333133 300d0609
2a864886 f70d0101 05050003 82010100 0c8324ef ddc30cd9 589cfe36 b6eb8a80
4bd1a3f7 9df3cc53 ef829ea3 a1e697c1 589d756c e01d1b4c fad1c12d 05c0ea6e
b2227055 d9203340 3307c265 83fa8f43 379bea0e 9a6c70ee f69c803b d937f47a
6decd018 7d494aca 99c71928 a2bed877 24f78526 866d8705 404167d1 273aeddc
481d22cd 0b0b8bbc f4b17bfd b499a8e9 762ae11a 2d876e74 d388dd1e 22c6df16
b62b8214 0a945cf2 50ecafce ff62370d ad65d306 4153ed02 14c8b558 28a1ace0
5becb37f 954afb03 c8ad26db e6667812 4ad99f42 fbe198e6 42839b8f 8f6724e8
6119b5dd cdb50b26 058ec36e c4c875b8 46cfe218 065ea9ae a8819a47 16de0c28
6c2527b9 deb78458 c61f381e a4c4cb66
quit
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
inspect icmp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
Cryptochecksum:b5958fd342c81895465887026d1423b3
: end -
Cisco ASA 5505 doesn't forware incoming connection to LAN
Hello everybody.
I just got a Cisco asa 5505 with the next OS and ASDM info
ASA 5505 OS 8.4(3) ASDM 6.47
I configured and enter all rules to allow incoming traffic to LAN but it's not working also, I have one host inside that is configured in a second IP and create the rule to allow traffic to it but it doesn't work too.
Problem 1
I have VNC running in port 5900 tcp and I want to connect from Internet using port 6001 and this has to forware the connection to the real VNC port. In the configuration I have a few host with the same configuration but I use different outside port to get it.
Problem 2.
I have a second IP with services: SMTP, HTTP, HTTPS and port 444 all TCP forwarding to a server in the LAN.
Facts:
SMTP.
Every time that I do telnet to the second IP looking for the SMTP port, the firewall doesn't let the incoming connection goes through and the LOGGING screen doesn't how that connection.
PORT 6001 (outside)
this port is configured to work with the IP in the outside internface and it was to send the incoming connection to a host inside to the real port 5900.
Can any one check my configuration if I'm missing anything? for sure I'm but I didn't find it. Bellow is the configuration, I masked the Public IPs just left the last number in the IP, also I left the LAN network to see better the configuration.
I will appreciate any help.
Thanks a lot..
CONFIGURATION.
: Saved
ASA Version 8.4(3)
hostname saturn1
domain-name mydominio.com
enable password SOMEPASS encrypted
passwd SOMEPASS encrypted
names
name 192.168.250.11 CAPITOLA-LAN
name 192.168.250.15 OBIi110-LAN
name 192.168.250.21 DRP1260-LAN
name 192.168.250.22 HPOJ8500-LAN
name 192.168.250.30 AP-W77-NG-LAN
name 192.168.250.97 AJ-DTOP-PC-LAN
name 192.168.250.96 SWEETHEART-PC-LAN
name 192.168.250.94 KIDS-PC-LAN
name XX.YY.ZZ.250 EXTERNALIP
name XX.YY.ZZ.251 EXTERNALIP2
name XX.YY.ZZ.1 GTWAY
dns-guard
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.250.2 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address EXTERNALIP 255.255.255.0
boot system disk0:/asa843-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name mydominio.com
object network CAPITOLA-LAN
host 192.168.250.11
object network EXTERNALIP
host XX.YY.ZZ.250
description Created during name migration
object network CAPITOLA-PUBLIC
host XX.YY.ZZ.251
object network capitola-int
host 192.168.250.11
object network capitola-int-vnc
host 192.168.250.11
object network aj-dtop-int-vnc
host 192.168.250.97
object network sweetheart-int-vnc
host 192.168.250.96
object network kids-int-vnc
host 192.168.250.94
object network VPNNetwork
subnet 10.10.20.0 255.255.255.0
object network InsideNetwork
subnet 192.168.250.0 255.255.255.0
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network capitola-int-smtp
host 192.168.250.11
object-group service capitola-int-smtp-service tcp
port-object eq smtp
object-group service capitola-int-services tcp
port-object eq smtp
port-object eq https
port-object eq www
port-object eq 444
object-group service capitola-int-vnc-service tcp
port-object eq 6001
object-group service aj-dtop-int-vnc-service tcp
port-object eq 6002
object-group service sweetheart-int-vnc-service tcp
port-object eq 6003
object-group service kids-int-vnc-service tcp
port-object eq 6004
access-list incoming extended permit icmp any any
access-list incoming extended permit tcp any object capitola-int object-group capitola-int-services
access-list incoming extended permit tcp any object capitola-int-vnc object-group capitola-int-vnc-service
access-list incoming extended permit tcp any object aj-dtop-int-vnc object-group aj-dtop-int-vnc-service
access-list incoming extended permit tcp any object sweetheart-int-vnc object-group sweetheart-int-vnc-service
access-list incoming extended permit tcp any object kids-int-vnc object-group kids-int-vnc-service
access-list incoming extended permit tcp any object capitola-int-smtp object-group capitola-int-smtp-service
access-list split-tunnel standard permit 192.168.250.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any object VPNNetwork
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpnpool 10.10.20.1-10.10.20.50 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-647.bin
no asdm history enable
arp timeout 14400
nat (inside,any) source static any any destination static VPNNetwork VPNNetwork no-proxy-arp
object network capitola-int
nat (any,any) static XX.YY.ZZ.251
object network capitola-int-vnc
nat (inside,outside) static interface service tcp 5900 6001
object network aj-dtop-int-vnc
nat (inside,outside) static interface service tcp 5900 6002
object network sweetheart-int-vnc
nat (inside,outside) static interface service tcp 5900 6003
object network kids-int-vnc
nat (inside,outside) static interface service tcp 5900 6004
object network obj_any
nat (inside,outside) dynamic interface
object network capitola-int-smtp
nat (any,outside) static interface service tcp smtp smtp
access-group incoming in interface outside
route outside 0.0.0.0 0.0.0.0 GTWAY 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
aaa authentication ssh console LOCAL
http server enable
http server idle-timeout 2
http server session-timeout 1
http 192.168.1.0 255.255.255.0 inside
http CAPITOLA-LAN 255.255.255.255 inside
http AJ-DTOP-PC-LAN 255.255.255.255 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
telnet timeout 5
ssh CAPITOLA-LAN 255.255.255.255 inside
ssh AJ-DTOP-PC-LAN 255.255.255.255 inside
ssh timeout 15
console timeout 0
vpn-addr-assign local reuse-delay 2
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password SOMEPASS encrypted privilege 15
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect pptp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:036b82d3eb5cffc1c65a3b381246d043
: end
asdm image disk0:/asdm-647.bin
no asdm history enableJose, your fix to problem 1 allows all access from the outside, assuming you applied the extended list to the outside interface. Try to be more restrictive than an '...ip any any' rule for outside_in connections. For instance, this is what I have for incoming VOIP (access list and nat rules):
access list rule:
access-list outside_access_in extended permit udp any object server range 9000 9049 log errors
nat rule:
nat (inside,outside) source static server interface service voip-range voip-range
- 'server' is a network object *
- 'voip-range' is a service group range
I'd assume you can do something similar here in combination with my earlier comment:
access-list incoming extended permit tcp any any eq 5900
Can you explain your forwarding methodology a little more? I'm by no means an expert on forwarding, but the way I read what you're trying to do is that you have an inbound VNC request coming in on 5900 and you want the firewall to figure out which host the request should go to. Or is it vice-versa, the inbound VNC request can be on port 6001-6004 ? -
Cisco ASA 5505 Site to site VPN IPSEC tunnel to an Clavister Firewall
Hi,
I have weird problem with a Site to site VPN tunnel from a Cisco ASA 5505 to an Clavister Firewall.
When I restart the Cisco ASA 5505 the tunnel is up and down,up, down, down, and I get all strange messages when I see if the tunnel is up or down with the syntax: show crypto isakmp sa
After a while like 5-10 min the vpn site to site tunnel is up and here is the strange thing happening I have all accesslists and tunnel accesslists right I can only access one remote network (Main site Clavister Firewall) trought the vpn tunnel behind the Cisco ASA 5505, and I have 5 more remote networks that I want to access but only one remote network is working trought the vpn tunnel behind the Cisco ASA. I see that when I do this syntax in ASA: show crypto ipsec sa.
They had a Clavister Firewall before on that site before and now they have a Cisco ASA 5505 and all the rules on the main site thats have the big Clavister Firewall is intact so the problems are in the Cisco ASA 5505.
Here is some logs that ASDM give me about the tunnel issue, but like I said, the tunnel is up and only one remote network is reachable in that tunnel.....
3
Nov 21 2012
07:11:09
713902
Group = 195.149.180.254, IP = 195.149.169.254, Removing peer from correlator table failed, no match!
3
Nov 21 2012
07:11:09
713902
Group = 195.149.180.254, IP = 195.149.169.254, QM FSM error (P2 struct &0xc92462d0, mess id 0x1c6bf927)!
3
Nov 21 2012
07:11:09
713061
Group = 195.149.180.254, IP = 195.149.169.254, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 0.0.0.0/0.0.0.0/0/0 local proxy 0.0.0.0/0.0.0.0/0/0 on interface outside
5
Nov 21 2012
07:11:09
713119
Group = 195.149.180.254, IP = 195.149.169.254, PHASE 1 COMPLETED
Here is from the syntax: show crypto isakmp sa
Result of the command: "show crypto isakmp sa"
Active SA: 1
Rekey SA: 0 (A tunnel will report 1 Active and 1 Rekey SA during rekey)
Total IKE SA: 1
1 IKE Peer: 195.149.180.254
Type : L2L Role : responder
Rekey : no State : MM_ACTIVE
Result of the command: "show crypto ipsec sa"
interface: outside
Crypto map tag: CustomerCryptoMap, seq num: 10, local addr: 213.180.90.29
access-list arvika_garnisonen permit ip 172.22.65.0 255.255.255.0 192.168.123.0 255.255.255.0
local ident (addr/mask/prot/port): (172.22.65.0/255.255.255.0/0/0)
remote ident (addr/mask/prot/port): (192.168.123.0/255.255.255.0/0/0)
current_peer:195.149.180.254
#pkts encaps: 2188, #pkts encrypt: 2188, #pkts digest: 2188
#pkts decaps: 2082, #pkts decrypt: 2082, #pkts verify: 2082
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 2188, #pkts comp failed: 0, #pkts decomp failed: 0
#pre-frag successes: 0, #pre-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#send errors: 0, #recv errors: 0
local crypto endpt.: 213.180.67.29, remote crypto endpt.: 195.149.180.254
path mtu 1500, ipsec overhead 74, media mtu 1500
current outbound spi: E715B315
inbound esp sas:
spi: 0xFAC769EB (4207372779)
transform: esp-aes-256 esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 5, }
slot: 0, conn_id: 2879488, crypto-map: CustomerCryptoMap
sa timing: remaining key lifetime (kB/sec): (38738/2061)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0xFFFFFFFF 0xFFFFFFFF
outbound esp sas:
spi: 0xE715B315 (3876958997)
transform: esp-aes-256 esp-sha-hmac no compression
in use settings ={L2L, Tunnel, PFS Group 5, }
slot: 0, conn_id: 2879488, crypto-map: CustomerCryptoMap
sa timing: remaining key lifetime (kB/sec): (38673/2061)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
And here are my Accesslists and vpn site to site config:
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 5
lifetime 84600
crypto isakmp nat-traversal 40
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map CustomerCryptoMap 10 match address VPN_Tunnel
crypto map CustomerCryptoMap 10 set pfs group5
crypto map CustomerCryptoMap 10 set peer 195.149.180.254
crypto map CustomerCryptoMap 10 set transform-set ESP-AES-256-SHA
crypto map CustomerCryptoMap interface outside
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 192.168.123.0 255.255.255.0 -------> This is the only remote network I can reach behind the Cisco ASA and the other remote networks dont work..
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 host 10.1.34.5
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 host 10.1.20.76
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 host 62.88.129.221
access-list VPN_Tunnel extended permit ip 172.22.65.0 255.255.255.0 172.22.71.0 255.255.255.0
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 192.168.123.0 255.255.255.0
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 host 10.1.34.5
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 host 10.1.20.76
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 host 62.88.129.221
access-list nonat extended permit ip 172.22.65.0 255.255.255.0 172.22.71.0 255.255.255.0
nat (inside) 0 access-list nonat
All these remote networks are at the Main Site Clavister Firewall.
Best Regards
MichaelHi,
I'd start by getting the configuration of the remote site related to Local/Remote network configurations and go through them. Even though no changes have been made.
If they are mirror images of eachother already I'd say its probably some problem related to Cisco/Clavister setup
Seems especially wierd to me that one of the error messages includes 0.0.0.0 lines.
I have run into some problems with L2L VPN configurations when our Cisco device just doesnt want to work with the remote end device. In some cases we have confirmed that our networks defined for the L2L VPN are exactly the same and yet when checking debugs on the ASA side we can see the remote end device using totally wrong network masks for the VPN negotiaton and therefore it failed. That problem we corrected with changing the network masks a bit.
Maybe you could try to change the Encryption Domain configurations a bit and test it then.
You could also maybe take some debugs on the Phase2 and see if you get anymore hints as to what could be the problem when only one network is working for the L2L VPN.
- Jouni -
ASA 5505 - 2 Internet Connections, Problems with the Default Route
Hey there,
i have a Problem at a Customer Site at the moment. The customer uses an ASA 5505 with two internet connections attached to it. On the first connection (which is the only one in use at the moment) he has some Static-PAT's from Outside to Inside where he translates different services to the internal servers. He also has a site-2-site VPN terminating there and AnyConnect.
He now wants to switch the Internet Traffic from Inside to the new Internet Connection. Therefore changing the default route to that new ISPs Gateway. The problem now is, that no traffic recieved on the old "outside" Interface is transmitted back out of that old "outside" Interface. And this happens although the "same-security permit intra-interface" command is set.
Can you tell me what's wrong here? For every Static-PAT from outside to inside there is also a dynamic PAT from inside to outside. But the ASA seems to ignore this. I have not looked into the Logs yet, was too busy finding the problem because i had no real time window to test on the productive ASA.
Can it be achieved in any way? Having a default route on the ASA which leads any traffic to the second internet connection while still having connections on the first internet connection where no explicit route can be set? Because connections arrive from random IPs?
Many thanks for your help in advance!
SteffenPhillip, indeed , I have as well read may comments,it all depends on your environment as they all differ from one another, you best bet is to have a good solid plan for upgrade and fall back. You do have a justification to upgrade for features needed, so I would suggest the following:
1- Do a search again in forum for ASA code upgrades and look at comments from users that have gone through this process and note their impact in fuctionality if any. I believe this is good resource to collect information .
2- Very important , look into release notes for a particular version. For example version 8.0, look into open CAVEATS usually at the end of the link page, reading the open bugs gives you clues what has not yet been resolved for that particular code and if in fact could impact you in your environment, it is possible that a particular bug does not realy apply to your environment becuase you have yet not implemented that particualr configuration. Usually we all try to aim towards a GD (General Deployment) code which is what we all understand is most stable but not necesarily means you have to be stack in that code waiting for another GD release, in my personal experience I have upgraded our firewall from 7.2 to 8.0(3) long ago and had no issues, and recently upgraded to 8.0(4)when it was first release in August this year.
Release notes
http://www.cisco.com/en/US/products/ps6120/prod_release_notes_list.html
3- AS a good practice precaution -
a-Backup firewall configs in clear text as well as via tftp code.
b-Backup running code and ASDM version code currently running in firewall.
c- Save the output of " show version " to have as reference for all the feature licenses you currently have running as asll as activation keys - good info to have to compare with after upgrade.
d- Ensure that the code you will be using to upgrade also uses correct ASDM version code.
I think with thorough assesment and preparation you can indeed minimize impact.
Rgds
Jorge -
ASA 5505 - L2TP over IPsec - Remote Address shows outside interface address
Using an ASA 5505 for firewall and VPN. We've enabled L2TP over IPsec to allow Windows clients to connect without third party software.
The devices complete the connection and authenticate fine, but then are unable to hit any internal resources. Split tunneling seems to be working, as they can still hit outside resources. Packet tracer shows tcp flowing freely between VPN clients (192.168.102.0/24) and internal resources (192.168.100.0/24). Even the NAT translation looks good in packet tracer.
I pulled up the session details for one of the VPN clients in the ASDM and under the IPsecOverNatT details, it is showing the VPN client's remote address correctly, but displays the local address as the address assigned to the outside interface (which the client is using to connect.) This seems to be the problem, as viewing detailed connection logs shows the internal resources trying to send packets back to the outside interface rather than the VPN client's assigned internal addresses. Details:
Crypto map tag: SYSTEM_DEFAULT_CRYPTO_MAP, seq num: 65535, local addr: [OUTSIDE INTERFACE ADDRESS]
local ident (addr/mask/prot/port): ([OUTSIDE INTERFACE ADDRESS]/255.255.255.255/17/1701)
remote ident (addr/mask/prot/port): ([VPN CLIENT ADDRESS]/255.255.255.255/17/0)
current_peer: [VPN CLIENT ADDRESS], username: vpnuser
dynamic allocated peer ip: 192.168.102.1 [This is what I think it should be showing for local ident]
dynamic allocated peer ip(ipv6): 0.0.0.0
#pkts encaps: 16, #pkts encrypt: 16, #pkts digest: 16
#pkts decaps: 18, #pkts decrypt: 18, #pkts verify: 18
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 16, #pkts comp failed: 0, #pkts decomp failed: 0
#post-frag successes: 0, #post-frag failures: 0, #fragments created: 0
#PMTUs sent: 0, #PMTUs rcvd: 0, #decapsulated frgs needing reassembly: 0
#TFC rcvd: 0, #TFC sent: 0
#Valid ICMP Errors rcvd: 0, #Invalid ICMP Errors rcvd: 0
#pkts no sa (send): 0, #pkts invalid sa (rcv): 0
#pkts encaps failed (send): 0, #pkts decaps failed (rcv): 0
#pkts invalid prot (rcv): 0, #pkts verify failed: 0
#pkts invalid identity (rcv): 0, #pkts invalid len (rcv): 0
#pkts invalid pad (rcv): 0,
#pkts invalid ip version (rcv): 0,
#pkts replay rollover (send): 0, #pkts replay rollover (rcv): 0
#pkts replay failed (rcv): 0
#pkts min mtu frag failed (send): 0, #pkts bad frag offset (rcv): 0
#pkts internal err (send): 0, #pkts internal err (rcv): 0
local crypto endpt.: [OUTSIDE INTERFACE ADDRESS]/4500, remote crypto endpt.: [VPN CLIENT ADDRESS]/8248
path mtu 1500, ipsec overhead 82(52), media mtu 1500
PMTU time remaining (sec): 0, DF policy: copy-df
ICMP error validation: disabled, TFC packets: disabled
current outbound spi: 05BFAE20
current inbound spi : CF85B895
inbound esp sas:
spi: 0xCF85B895 (3481647253)
transform: esp-aes esp-sha-hmac no compression
in use settings ={RA, Transport, NAT-T-Encaps, IKEv1, }
slot: 0, conn_id: 77824, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (4373998/3591)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x000FFFFD
outbound esp sas:
spi: 0x05BFAE20 (96448032)
transform: esp-aes esp-sha-hmac no compression
in use settings ={RA, Transport, NAT-T-Encaps, IKEv1, }
slot: 0, conn_id: 77824, crypto-map: SYSTEM_DEFAULT_CRYPTO_MAP
sa timing: remaining key lifetime (kB/sec): (4373999/3591)
IV size: 16 bytes
replay detection support: Y
Anti replay bitmap:
0x00000000 0x00000001
Any ideas? The remote clients connect but when internal resources try to send traffic to the VPN clients, the packets are directed to the outside interface address instead of the local address assigned to the VPN client.I have what I believe to be a similar issue. Site to site vpn is working well. That is site b can ping and send traffic to site A but Site A can not. Site B is a 3rd party vpn router. Site A is a Cisco 5505.
It appears that when the crypto map inserts the route into the routing table it shows the route via the outside IP of the outside interface and not the IP of Site B. in the crypto map I can see the proper ip address for the peer. I can't figure out why when it inserts the route that it uses the wrong ip address
Maybe you are looking for
-
Permissions problem when copying files from external hard drive
Hi. I have recently reinstalled leopard (wiped the hard drive clean) on my macbook pro. (10.5.4). I had used Time Machine so I have a complete backup. But I only wanted a few of the files so I didn't do a backup restore. I went into the file director
-
The installation cannot be completed
Hello, I have Macbook Pro- retina, and I was updating it from Marvericks to OS X Yosemite, but while I install it, it froze out and I shutdown the power then started up again. Then it reinstall OS X Marvericks, and suddenly, a message shows up that s
-
My phone says searching and won't turn on
My phone has been saying searching all day and I know it is a hardware and antenna issue this happened before 6 months ago and I was able to restore my phone on my own when my carrier couldn't fix it. Now apple says they can't and I'm 3 weeks past my
-
I have problems with DW CS3 when I use the AHCI mode in BIOS. Then DW can not start. But I need a solution. Since I do not want to buy DW CS4 although this runs without any problems.
-
Canon EF 70-200mm f/4 L USM not as sharp as myCanon EF 100-400mm f/4.5-5.6L IS
Hi can't seem to get a sharp a image with my 70- 200 as I can with my 100-400mm. Should I be getting just as sharp photos with both lenses. I still have a warranty with best buy. Solved! Go to Solution.