Using an eMac as a display

Can I pump a mac mini through an eMac instead of buying a new display for the mac mini?

BRADLEY BEEF wrote:
Can I pump a mac mini through an eMac instead of buying a new display for the mac mini?
I don't have an eMac, but I used to have an original Bondi Blue iMac (the one with a CRT). I remember opening it to add more memory and I noticed that the monitor was simply connected to the motherboard with a standard external video connector. This connector was the old Mac connector used by Apple in the 1990s, but maybe they used the same technique with a VGA connector?
I would be careful if you are going to open up an eMac, especially if you haven't opened a computer before.
David

Similar Messages

Hooking mac mini up to emac with firewire, and using emac as the display

Is this possible? Would it work to hook up the mac mini via firewire to the emac and use the emac disaplay to run the computer? Thanks

I second that!
This is a question that is asked with remarkable regularity, and while it is possible to connect the two systems and to 'run' the mini either as a remote hard drive (a very expensive way of gaining slow external storage) or remote control it, the former is an inefficient use of the mini and the latter only allows you to open a window onto the mini from the host system, where performance is somewhat limited.
Better in this sort of situation to sell the old system and use the money to buy a new display for the mini, or if the old system is needed and funds very limited, to look for a used display.

I'm using an eMac power cord on an iMac G5 and the screen is a blue tinted color. No true colors are displayed.

I just realized I was using an eMac powercord on my G5 iMac.
Make a difference at all? Does it screw up my computer?
I have a weird screen problem anything to do with this?

I can't see how that would make a difference. But use the proper power cord for the iMac, if you have it.
To see if this is software or settings related, if you have a way to boot from a different system, such as a Mac OS X installation disk, start up from that other system and see if you still have the "blue tinted color."
If the problem recurs, you should do these two procedures to Reset PRAM and Reset SMU, to see if there is any improvement
http://support.apple.com/kb/ht1379
http://support.apple.com/kb/ht1767
When you do the Reset SMU procedure, if you have been connecting the power cord to an old or over-crowded power strip (surge suppressor), try connecting it to a wall outlet by itself, to see if that makes any difference.
If that does not help, there may be a hardware-related problem.

Is there a way to use the eMac as an external monitor

I haven't used my Emac for awhile, but my 17" powerbook is now having a serious display problem and I can't even see the log-in screen. I want to use the Emac as an external monitor or at least have sharing between the two machines. They are both using 10.4.11. What do I need to do to connect them?

You need to connect them via ethernet or wirelessly, plus a product such as ScreenRecycler. Conventional video in isn't available on most Macs.
(56636)

Using an emac as a monitor for a mac mini

Hi,
Sorry if the question was already asked, but a quick search in the forum brought no answer.
I have an emac (OS9) and a mac mini(OSX). I'd like to use the emac as a monitor for the mac mini. Is it possible? How? (Both are G4, although I don't think that's relevant : I don't want to use them at the same time, only to use the Emac as a "screen")
Many thanks.

I happen to know for a fact that you can use the internal screen on an iMac G3 333, and presumably also a 266 and 233. It has a fixed horizontal frequency so it will only display the resolutions that you can choose with it's motherboard installed: 640x480@117Hz, 800x600@95Hz, and 1024x768@75Hz. With DisplayConfigX I was even able to get other resolutions, as long as I stayed within the 60kHz horizontal frequency. If try to set it to any other resolution and refresh rate it will not work, so the best way to test it is to have another screen as your main screen so that you can set the resolutions on the iMac screen from there. I imagine that the screen in the eMac does not have a fixed horizontal frequency, so if you got the pinouts, you could probably get it working. However, I made a custom video cable for a slot loading iMac G3, and I couldn't get it to work.

How do I use my iPad as the display and input device for my Mac Mini?

I plan to have the following stereo configuration:
Integrated amplifier with USB input that supports up to 24/192 audio, the Peachtree Nova 125
Mac Mini with USB connection to amp, wifi to the Internet, housed in the equipment cabinet with the integrated amp, no other music source. No display or keyboard connected to the Mac Mini.
I would like to use my iPad as the display and to control the Mac Mini to run Pandora, iTunes, Spotify, podcasts, etc.
Anyone have success with this general configuration?

You need a set of apps (one for iPad and another for computer) like Team viewer or Go to my PC

How do I use my Apple Cinema HD Display as my primary workspace with my MacBook Book Pro?

How do I use my Apple Cinema HD Display as my primary workspace with my MacBook Book Pro?

In the Arrangement tab of Displays system preference, drag the menu bar to the picture of the other display.

How do I use my Macbook pro retina display as a monitor for a PC?

How do I use my Macbook pro retina display as a monitor for a PC?

MacQueries wrote:
How do I use my Macbook pro retina display as a monitor for a PC?
Unfortunately, that is not possible. The computer only can "output" your display image, it cannot "input" an image from an external computer and display it on your MacBook's retina display.

HT204291 My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green). My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple

My iPad 4 does not show up on my TV screen when in AirPlay mirroring mode using WiFi. The iPad displays AirPlay set to TV with the Mirroring On (green).
My iPad IOS software is 8.2 and my Apple TV software is at 7.1. The TV displays the Apple Menu. The “Settings” does however displays the General menu allowing me to see:
Apple software: 7.1 (7003)
Apple TV: Model No. A1464, Part No. MD199B/A
Signal Strength shows 5 circles.
It does not display the iPad screen but when I use the BT Sport App I can hear the sound but there is no video. I have searched the internet for a solution to no avail. The problem first arose when the IOS was at 8.1+ but it worked correctly briefly when I updated to IOS 8.2. Can you help please?

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router. (Also try removing it’s power cord for at least 30 seconds)
Restart your mobile device.
If you are still having problems, the following article(s) may help you.
Troubleshooting AirPlay
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

I want to use an IPad (w/retina display-newest) in my church hooked up to a projector

I want to use an IPad (w/retina display-newest) in my church hooked up to a projector and shown on a screen. I'd like to do it wirelessly as the projector will be installed in the ceiling. I am not sure exactly what I would need to get this set up. I do not have wifi at church or cellular but would be getting the iPad (not yet purchased) with wifi only. If I use Apple TV to hook up the projector to, would it need wifi to work if I will only be using the ipad for documents, worksheets (much like what a school/professor would use) or other things that an app could do (draw a line, etc.)

Epson projectors have such a feature, so if you're going to buy a new projector, you might start with their units. The app is described here:
http://www.epson.com/cgi-bin/Store/jsp/Landing/ProjectorApp.do
and there's a projector compability list linked from the very bottom of the page. There may be other projector manufacturers with similar apps, but I don't know for sure. All will probably also require a local WiFi network set up, though said network should not need Internet access if that's an issue for you.
Regards.

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop? Would like to use larger screen when working at home. I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work. When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer. What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible? Any assistance would be appreciated.

quax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

Using my widescreen tv as display

using my widescreen as a display , works well but i can t get the top menu bar or the bottom dock options to fit into the screen. i m guessing this is a format problem with my tv but i can t seem to get anything to work with that either. any suggestions about what i can do in my settings to get these to fit????????? thx

Have you gone into the settings and played around with all the different resolution sizes? I had the same problem but now it fits perfect.
Most of them wont work, it'll just be a blue screen, but you should find one that works.

Can I use my iMac as a 'display' for my MacBook Pro?

Hi all, I am really hoping someone can help me here.
I am wondering if I can use my 24" iMac as a display for my MacBook Pro (both running Snow Leopard).
It's my father's 80th birthday party in about 24 hours time. I am doing up the music and slideshow (thanks Apple - so easy!).
My plan was to simply take my iMac and use it. However, I managed to drop the wireless keyboard (darn those dogs) and now my keyboard won't work. I have no backup keyboards here (gave the wired one to Dad to use with his Mac mini). I live in a country area with no access to a Mac store and it will take more than 24 hours to get a new one. Went to my local 'other computer' general store last night: I really don't want to buy an ugly black keyboard..... I have just had a great idea:
Can I network my MacBook Pro and use it as the source for the slide show and simply use the iMac as a display? I have plenty of DVI adaptors but am just not sure how I would go about the software side of things? Or should I simply buy an ugly PC keyboard (and if I do, will the WIndows button work as an Apple button???)
Any suggestions would be really appreciated.
Thanks!

The imac 24 can't be used as a monitor over a DVI connection or the like, Suzanne, but you may be able to achieve what you want to using "Screen Sharing" by networking the two computers. This lets your MBP effectively control what is running on the iMac.
See HERE for the basic setup. For information about how to access the "shareable" screen from the MBP see HERE.
One possible problem may be actually getting this set-up on the iMac if it is not already enabled, however, unless you can borrow a keyboard from someone (your password may have to be entered to enable it). You may be able to get around this, if necessary, using the "keyboard viewer" (which you can place in the menubar using System preferences > Keyboard, if you don't already have it there).
Cheers
Rod

How can i copy files from one external hard disk to another using macbook pro with retina display

How can i copy files from one external hard drive to another using macbook pro with retina display?

That's odd - if you open Disk Utility (Applications->Utilities) and select the disk(s), how are they formatted? If you're only going to be used with your Mac, they should be formatted as "Mac OS Extended (Journaled)".
Clinton

Using an eMac as a display

Similar Messages

Maybe you are looking for