Using an existing manifest for packaging

I have an existing jar containing an config xml. I modified this xml and want to repackage everything with my change. but does anybody know how to repackaging without creating a new manifest file?

I think a new account may be the easiest way if you don't have an existing subscription or cloud files for which to keep continuity.

Similar Messages

  • Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"

    Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"@

    Hi boags2014,
    Please refer this link and know the work-arounds for the same:
    How do I complete a purchase when I get an incorrect "country" error?
    Regards,
    Anubha

  • Hi, i'm trying to download the Lightroom 6 stand alone version and get the following message right after a click the checkout box: "The account was registered for a different country. Please sign out and sign in using an existing account for this country.

    Hi, i'm trying to download the Lightroom 6 stand alone version and get the following message right after a click the checkout box: "The account was registered for a different country. Please sign out and sign in using an existing account for this country." I'm in Namibia and tried to change my country from Africa to USA but still the same problem. TIA

    Hi Annen,
    Please refer the following forum thread.
    Trying to purchase trial period in different email address - error message "Error in Your Order The account was registered for a different country. Please sign out and sign in using an existing account for this country. Ok"
    Regards,
    Sumit Singh

  • While attempting to check out, ERROR states "Account registered for different country.  Please sign out and sign in using an existing account for this country."

    While attempting to check out, ERROR states "Account registered for different country.  Please sign out and sign in using an existing account for this country."  I started my account in India.  Then changed it to the US when I moved here, then tried to change it back to india when this issue arose, however, the error still occurs.  How can I fix this??

    I think a new account may be the easiest way if you don't have an existing subscription or cloud files for which to keep continuity.

  • My daugther' iphone id under my wife's email and now all music and pictures are attached to that id.  Wife now has an ipad and looking at using the existing id for set up? Would like to establish new id for daughter and not lose or share music/photos?

    My daugther' iphone apple id is under my wife's email and now all music and pictures are attached to that id.  My wife now has an ipad and I am looking at using the existing id during set up?   Thus, I would like to establish new apple id for daughter, associated to her email account, however I do not want to lose or share her music/photos, nor share with my wife's id.  Is this possible, or is it best just to establish a new id for my wife, and then change the email address associated with the existing apple id?

    well if you establish a new apple id for your wife that would be best unless you email all of the existing photos to your email and then when you have established a new id then you log into your email on the new id and save all of your pics onto it by pressing on tthe pic for about 5-8 seconds then options will come up and you press the save to my album ..as for the music if you can copy and paste, through computer, the songs then awesome!

  • TS4268 Why can't I use my existing email for Face Time on my IPad?

    Why can't I use my existing email in Face Time and Instant Message?

    Do you have another Apple ID by any chance? There are many, many discussions about this message that you are getting. Here is one where it seems that these users were able to resolve it.
    https://discussions.apple.com/thread/4023754?start=0&tstart=0
    There are many other past discussions as well. Maybe you can find some help here as well.
    http://www.google.com/search?q=imessage%20email%20address%20already%20in%20use
    Or maybe something in the Apple support article will help.
    http://support.apple.com/kb/TS2755

  • Using pacman to search for packages - libraries no more used / needed

    Is there a way to use pacmant to "clean out" the system, by searcing and deleting all packages and libraries no more needed nor used by anything?

    Are you looking for options different from these? http://bbs.archlinux.org/viewtopic.php?id=88987
    I don't think there's a completely automatic way. At least, not a way that I would trust.
    Last edited by drcouzelis (2010-01-22 16:42:31)

  • How to use an existing certificate for the ABAP SSL setup using STRUST

    Hi
    All the documentation say to Create certificate Request and subsequently import the Certificate response from a CA.
    In our case, the company has a certificate from a valid CA root and we would like to use this when creating the SSL PSE files, in particular, the SSL Server PSE.
    Should I use sapgenpse instead of strust??
    What are the steps to apply the certificate (www.company.com.au) to this instance (host.dom.internal)??????
    Thanks
    Doug

    Hi Dough,
    pls chk out this for SSL certificate
    http://help.sap.com/saphelp_nw04/helpdata/en/20/37c33ae8361838e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/20/37c33ae8361838e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/16/1bb23bdb0d0156e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/16/1bb23bdb0d0156e10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c1/96b13b6e95b72ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/c1/96b13b6e95b72ce10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e1/b6b13bd0ac933ae10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/e1/b6b13bd0ac933ae10000000a11402f/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/aa/a8463c6796e61ce10000000a114084/frameset.htm
    pls reward points
    Thanx
    Metha

  • VLAN on WAP (how do i make it use my existing ASA for DHCP requests?)

    Hey guys,
    I have a ASA 5520 and a subinterface created for my VLAN 54. However i set up the WAP, but it only seems to work if i actually hardset an IP address on the PC. How do i make it look at the firewall as the DHCP server. If i plug into an access port, it will automatically look at the firewall for DHCP, but not on wireless...
    Can you help?
    I want it to use the same ip addresses as the LAN is using.

    There should be no difference between connecting via an AP and access port.  Double-check your ip helper-address, but if access ports work then that should be fine.
    Can you post your AP config?  We should make sure there's nothing misconfigured on that.  Please also post your switchport config.

  • Can i use same address pool for different remote access VPN tunnel groups and policy

    Hi all,
    i want to create a different remote access VPN profile in ASA. ihave one RA vpn already configured for some purpose.
    can i use the same ip address pool used for the existing one for the new tunnel-group (to avoid add rotuing on internal devices for new pool) and its a temporary requirement)
    thanks in advance
    Shnail

    Thanks Karsten..
    but still i can have filtering right? iam planning to create a new group policy and tunnelgroup and use the existing pool for new RA  and i have to do some filetring also. for the new RA i have to restrict access to a particualr server ,my existing RA have full access.
    so iam planning to create new local usernames for the new RA and new group policy with vpn-filter value access-list to apply for that user as below,  this will achive waht i need right??
    access-list 15 extended permit tcp any host 192.168.205.134 eq 80
    username test password password test
    username test attributes
    vpn-group-policy TEST
    vpn-filter value 15
    group-policy TEST internal
    group-policy TEST attributes
    dns-server value 192.168.200.16
    vpn-filter value 15
    vpn-tunnel-protocol IPSec
    address-pools value existing-pool
    tunnel-group RAVPN type ipsec-ra
    tunnel-group RAVPN general-attributes
    address-pool existing-pool
    default-group-policy TEST
    tunnel-group Payroll ipsec-attributes
    pre-shared-key xxx

  • Versioning using manifest for multiple packages in a single jar

    I am having trouble trying to use the package class to read the version of a specific package from a maifest that contains information about multiple packages. According to Sun specs, you should be able to include information about multiple packages by separating them with a Name. for instance, if my hierarchy is
    com.a.b
    |
    |---com.a.b.c
    and I include in the manifest file,
    Manifest-Version: 1.1
    Name: com/a/b
    Specification-Title: my App package
    Specification-Vendor: someone Inc
    Created-By: someone
    Implementation-Vendor: someone
    Specification-Version: 1.1
    Implementation-Version: build1
    Implementation-Title: com.a.b
    Name: com/a/b/c
    Specification-Title: my App package
    Specification-Vendor: someone Inc
    Created-By: someone
    Implementation-Vendor: someone
    Specification-Version: 1.2
    Implementation-Version: build2
    Implementation-Title: com.a.b.c
    Now if I try to read the specific attributes for package com.a.b.c using Package.getPackage("com.a.b.c").getSpecificationVersion();, I find this to be null. Has anyone had any experience with this?
    thanks

    OK I think finally have it. You have to have the trailing / like you metioned. In addition to that, you need to separate your attributes for individual packages with a newline. SO my manifest should really look like
    Manifest-Version: 1.1
    Name: com/a/b/
    Specification-Title: my App package
    Specification-Vendor: someone Inc
    Created-By: someone
    Implementation-Vendor: someone
    Specification-Version: 1.1
    Implementation-Version: build1
    Implementation-Title: com.a.b
    Name: com/a/b/c/
    Specification-Title: my App package
    Specification-Vendor: someone Inc
    Created-By: someone
    Implementation-Vendor: someone
    Specification-Version: 1.2
    Implementation-Version: build2
    Implementation-Title: com.a.b.c
    Thanks for your help, euxx

  • Kde3 packages: "non existant prefix '' for kdelibs3"

    I have no ide what happend but today I'm getting this error for all packages for kde3:
    checking whether make sets $(MAKE)... yes
    checking for kde-config... /opt/kde/bin/kde-config
    configure: error: /opt/kde/bin/kde-config --prefix outputed the non existant prefix '' for kdelibs.
    This means it has been moved since you installed it.
    This won't work. Please recompile kdelibs for the new prefix.
    make: *** No targets specified and no makefile found. Stop.
    although it is working if done with as root user with argument '--asroot' (but I must add to all PKGBUILD string: '--with-qt-dir=/opt/qt')
    what happend ? what did I screw up ?
    Last edited by zyghom (2008-11-19 23:09:33)

    azleifel wrote:I've come across this as well.  Like mforce said, it should work if makepkg is run as root (don't forget to add the --asroot switch to the makepkg command).
    Yeah, that worked for me, but it's an indication that some work needs to be done. One needs to AVOID running this as root, and so I think thats going to be the first challenge for the amarok1 maintainer. The ONLY thing we should use root for is the actual installation, not the compilation.

  • How to update an existing item in a sharepoint list using the WSS adapter for Biztalk

    Is there a way that a record in SP list be updated using WSS adapter in biztalk ?
    BizTalk 2013 and SP 2013 ..
    Regards
    Ritu Raj
    When you see answers and helpful posts,
    please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

    A ListItem has its own unique row id so in all likelihood, an insert with the same data will result in a new list entry. The Lists Web Service however, has an UpdateListItem method which will take an update request. [refer
    http://msdn.microsoft.com/en-us/library/office/websvclists.lists.updatelistitems(v=office.15).aspx ]
    There is another note in the conference (marked answered) to your List Item Update problem. Probably worth a try too. [refer
    http://social.msdn.microsoft.com/Forums/en-US/bee8f6c6-3259-4764-bafa-6689f5fd6ec9/how-to-update-an-existing-item-in-a-sharepoint-list-using-the-wss-adapter-for-biztalk?forum=biztalkgeneral ]
    Regards.

  • I just bought a second iPhone for my business... I used my existing apple account and now all my texts are coming to both phones.. How do I get a secondary apple ID and change it on my business phone?

    I used my existing apple ID when I purchased a second iPhone for my business.. Now all my texts are coming to both phones.. Is there a way to create a new apple account for my business phone and if so.. How do I delete one and add another?

    Yes, you can have two separate Apple IDs, and it's pretty easy to set this up. Go into Settings > iTunes & App Store on your business phone. You should see your current Apple ID. Tap on it, then tap on sign out. You can then create a new Apple ID, using a different email address and password than those associated with the Apple ID on your other phone. Log back in using this new information, and you shouldn't get the texts that come to your other phone.
    Hope this helped!

  • How to delete old account, I can't log in due to - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

    How to delete old account, I can't log in due to error - This email address is not available for use as an Apple ID. You may already have an Apple ID associated with this address. Please try again or sign in using your existing Apple ID.

    All good, I loved with AppStore and now everything seems to be back to normal.

Maybe you are looking for