Using an External Hard Drive to Run Logic

In an attempt to keep logic from continually telling me there is a "system overload" I'd like to run as much of the program off a faster external hard drive. I've all ready download all the applications and most of the loops.I realize that you can't run the applications themselves from an external hard drive but would like to keep everything else off of the computer.
There are some things I have not download for the program just yet but what I have downloaded that aren't applications I'd like to move to the exHD.
So my questions:
1) In general, how do I do this?
2) Do I need to create user files on the exHD and then create a path? If so how do I do that?
3) Where do I find the files on the internal HD to put on the external?
4) Do I need to partition the external drive for this?
5) Are there any other questions I should be asking?
I've searched for answers on this and seem to find solutions that hint around it but don't address it specifically.
Any help is appreciated

Hi,
1) Copy your *EXS Factory Samples* folder to anywhere on another disk, delete the original, and put an alias of it in the original folder(s). Id. For Garageband content.
2) No.
3) Your EXS content should be here:
/Library/Application Support/Logic/EXS Factory Samples/
/Library/Application Support/GarageBand/Instrument Library/Sampler/Sampler Files/
and the same for Users/'you'/Library/Application Support/Logic, ~Garageband.
4. No.
5. No, just this one.
You can leave the instrument files where they are, just copy/move the samples.
btw, You can disable the annoying system overload message in the Audio Preferences, General tab.
regards, Erik,

Similar Messages

Is there a way to use my external hard drive to run sounds from Mainstage2?

Is there a way to use my external hard drive to run sounds from Mainstage2?

TM can back up external HDs. If you have both of your external drives attached, go to the options in TM preferences. Be sure the data drive is not listed (this lists drives/folders to exclude from a backup). Then initiate a TM backup or wait for the hourly backup. That should back up the data drive.
You can only tell TM what to exclude from a backup, not what to include.

I have an older MacBook Pro using 10.4.11 and want to use new operating system to use the latest iLife. Can i install 10.7 on an external hard drive and use the external hard drive to run new system while leaving my old system intact?

I want to use a new version of iLife (for iMovie and iDVD) but am currently running OS 10.4.11, which won't work with the newer iLife programs. Can i install OS 10.6.3 or 10.7 on an external hard drive, boot to that hard drive and work with the new software (installed on the external hard drive) using my MacBook Pro (circa 2005/6) as the engine while leaving my laptop running 104.11 the rest of the time?

Yes, you can use an external drive. To upgrade, however, means:
Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
Access the App Store with your Apple ID and purchase and download Lion.
Your computer must meet system requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud.

I'm using an external hard drive to run tiger

do to the fact that my internal drive seems to be busted and the computer sayss it's not even there. (if you know what's wrong with that, please tell!!!)
Anyways, my problem is that the whole thing will freeze for no reason once in a while and I am forced to give it a hard shutdown. Is this fixable?
Thanks for your time and help ladies and gents!

What make/model of external hard drive. Some disks themselves have a default power save feature, which may kick in regardless of the enclosure or system power settings. I have a Hitachi deskstar drive in an ADS enclosure, and it behaves this way - the drive spools down and power saves entirely on it's own, independent of the system power save settings (since the ADS's chipset does not support that feature, the disks internal settings take over).
If I were to use that drive as a boot drive, and let it sit idle (no disk read or write access) for a few minutes, the drive would power save, and the system would, of course, become unresponsive. Perhaps your external drive is similar?

Trouble using an external hard drive

Here's my situation: I have a fourth generation iPod touch with about 1700 songs, 10 or so podcast subscriptions, and my apps all set up with ratings, etc. Due to size of my PC's hard drive, I have to use an external hard drive to run iTunes with my supporting music and podcast files. This is the G: drive. I do NOT want iTunes to use my C: drive for any purpose. In Preferences, I have the iTunes media folder location set to G:\Music and would like all of my music, podcats, and apps to be stored in that location.
The problem I'm having is about once every two weeks or so, the external hard drive will get bumped or jarred and disconnect during a sync. Instead of stopping the sync and failing, iTunes will automatically move everything over to the C: drive and blow up my memory, create a new library, etc.
I have to delete this off my C: drive, which clears everything out of iTunes, and go to File > Add Folder to Library to restore all of my music and podcasts. It loses all of my ratings and I have to resubscribe to all podcasts (and delete the list of episodes I've already listened to). If I sync the iPod, it will delete all of the music and podcasts on the iPod because it thinks it has been synced to a different library when it just synced to a different drive. How in the world can I prevent iTunes from using the C: drive, and if it does, how can I transfer music and podcasts from my iPod to the iTunes library without losing 1,700 ratings?
Next question, when I a File > Transfer Purchases From iPod without syncing to get my Apps back, how do I make the apps go to G:\Music instead of C:\ drive?
Thanks

When you first opened the catalog on new Win7 laptop, was it the same catalog that you used on old laptop?
You may indeed have permissions set for the catalog folder. They could belong to the user of the old laptop. Did you try checking the permissions on the new Win7 laptop?

Running out of hard drive space---can I use my external hard drive-??

I have a 16GB iPod nano. I hope I can explain my problem well enough.
My laptop computer has the iTunes that I use for syncing my iPod. It has over 25gb of songs in it, but my problem is that it has completely run out of hard drive space, and I don't think I can delete anything else.
I have a 250 GB external hard drive that also has all my songs backed up on it, that has hard drive space left on it.
Is there a way to load new music into the external hard drive, that will sync up to the iPod when I connect it to the laptop, WITHOUT putting a copy of it into the laptop, and taking up space-?
The way it appears to me, and I may be wrong, is that there are 2 copies of eaxh song on my laptop---the one in my music folder, and then the one in the iTunes folder. Is that correct-?
OR, is there a way to remove some of the songs from the laptop, and put them into the external hard drive, but will still sync up to the iPod-?
Thanks for any help that anyone can offer, I'm desperate ~!
I'm not sure if this can be done, but I'd hate to think that I cannot put new music onto my iPod.
Thanks~!

Hello melbernai,
I think your best move would be to the move the entire iTunes library including of all of its file to your external hard drive and running your iTunes from there. You can even have it so that all newly imported music is saved to the external drive as well.
For more help on how to do this, I would check out this article on how to move and run your iTunes library from an external hard drive.
http://lifehacker.com/238296/ultranewb--how-to-move-your-itunes-library-to-an-ex ternal-drive
Hope this helps.
B-rock

HT201250 I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

How do I set up Time Machine to a shared drive on another Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

How do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full

how do you remove back up data from the memory storage? my storage data states that i have over 80gb of data used for back ups and i dont know why as i use a external hard drive as a time machine .now my 250gb flash storage is nearly full.. HELP!

When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.

I used an external hard drive for my backups via Time Capsule. I bought a new computer and I want to transfer all my old fonts over to the new one but when I go into the Font Library from the hard drive backup but my downloaded fonts aren't there?

I used an external hard drive to back up my computer using Time Capsule before I bought a new one. I am slowly transferring information fromt he backup to my new computer and I want to transfer over my old font book. When I go into the Font folder on the hard drive the only fonts that show up are the ones that came stock with the computer not any of the ones I have downloaded over time. Could they be downloaded somewhere else?

The answer to that would probably be "Yes." If you don't remember where your fonts were stored, you may want to search your backups for any of the font files you know the names to. See where that takes you.
Ideally, Font Book and other font managers will temporarily store the fonts you "installed" into the System when you run the OS. When you shut down, etc. they are removed and reloaded on restart. The permanent place fonts reside is where you saved them when or after you downloaded them. I typically create a Resources folder on the root level of the computer and place a Fonts folder there. Then I install fonts from there, and they are available to all users on that iMac.
Perhaps if you did not have that kind of a strategy, perhaps many of them are still in your Downloads folder?

Using an External Hard Drive vs. a separate computer for music producing

Hi all. I have a dilemma. I'm currently using logic express to make my music and its installed on my 13 inch macbook pro that I bought last year. Granted, it works fine, however I am looking to upgrade to Logic Studio soon as well as purchase Spectrasonic's Omisphere, which for those who don't know is about 50 gb of sounds. That on top of the 50 gb that come with Logic Studio means about 100 gb of software which I frankly don't have the room for on my macbook pro. I've been looking at buying a new mac mini, 2.3 ghz i5 with 8gb of RAM and a 500 gb Hard Drive, solely dedicated to making music. However, my friends tell me I should just buy an external hard drive and install Logic, as well as the software, on the hard drive since it will be far less expensive than buying a new computer. However, I don't know how I feel about installing software on an external hard drive. So my question is, given what I am trying to do, what is my best option? Are there issues with using an external hard drive for this sort of work that would make buying a seperate mac mini more practical, or vice versa?

If you want to do this in a cost-effective way, you should delete some files you don't need from your macbook pro to make room for logic pro. Even though Logic Pro has around 50 GB of stuff, most of it comes from the Jam Packs, which I'm guessing you won't really need to use...So make room for Logic Pro on your laptop and install it there...then use the external hard drive to store and record your music to.
If you're going to get a mac mini with that type of spec, you might as well buy a new macbook pro with the same specs and better.
Option #3, you can always upgrade your internal hard drive...there are plenty of sites on the net that shows tutorials and offers hard drives that have plenty of storage, faster speed, and you won't even need to purchase an external if you upgrade to at least a 1 TB, 7200 rpm hard drive.

Can I use an external hard drive for my ipad mini?

Can I use an external hard drive for my ipad mini?

There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

I have 1 gb of memory with10.6.8 and want to upgrade my OS can i use an external hard drive to solve this

I am running 10.6.8 and have 1gb of memory and want to upgrade can i use an external hard drive to solve this problem

You are confusing RAM (Ramdom Access Memory) with hard drive storage space.
You need to install more RAM, not an additonal hard drive.
You can purchase an external hard drive, if you like, if you want to install the new OS X upgrade onto an external drive. If you want to run the new OS X Mavericks from the external drive, depending on your Mac model, you need a fast protocol external hard drive.
Either a USB 3.0, Thunderbolt or FireWire 800 connected external hard drive.
To start, if you are running your Mac on 10.6.8 Snow Leopard, this is the barest of RAM to run Snow Leopard.
Without knowing any of your Macs specs, you realistically should be running your current OS with, at least 4 GBs of RAM.
Newer versions of OS X need, at least, 4 GBs of RAM or more as these newer OS X versions use more Mac computer resources than earlier OS X versions.
What year, screen size, CPU speed and amount of RAM installed in your Mac?
Be aware, if your Mac is running any older software that used to run under older PowerPC model Macs, those software apps will no longer will work under newer versions of OS X.
The emulation software that allows older PowerPC apps to run under OS X 10.6 Snow Leopard, called, Rosetta, no longer exists in newer versions of OS X and is long dead.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Good Luck!

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Installing Oracle Applications 11i using an external hard drive

Hi All,
I have a laptop with 60 gigs in it. As per the quick install CD in the Oracle Apps 11i pack I need to have at least 80 gigs space. So I wanted to know if it is possible to install Oracle Apps using a external hard drive and the Quick Install option. If anyone has done this please share it with me.
thanks
cheers
~k

Hi Kar,
Thanks for the info. I was waiting for confirmation on this before I went out and bought an external hard drive. My laptop runs a Windows XP Home edition OS and it is the only OS on the machine.
I scoured the market for external hard drives and it turns out that there is a wealth of information out there. Could you give me some pointers on which one of these you would recommend.
Also once the external hard drive is in place do I need to follow a different installation process or I can use Quick Install as is. If I remember correctly the info given in Quick Install stated that in Windows it would need some amount of space on my Temp folder which is why I needed extra space as my hard drive was only 60 gigs.
Now with this external hard drive will it automatically detect this and then try and load the files in this new space or will Quick Install still try to use the space in the Temp folder.
Really appreciate your help on this one.
thanks
cheers
~k

Using an External Hard Drive to Run Logic

Similar Messages

Maybe you are looking for