Using an external microphone with a Mac Pro Tower

I have a Mac Pro tower with OS 10.4.11 and I have a question regarding recording sound through an external microphone.
I own a microphone with a 1/4" jack and when I plug it into the designated input on the back of my tower, I'm not getting any sound. I've troubleshooted with a couple different microphones and none seem to work. Am I doing something wrong? Is there some sort of configuration that I have to do when using a mic?
Please help!

I'm sorry, but that's not really my area of expertise. If you are planning to use this for simple voice-recording you could try the Griffin iMic device which helps provide both pre-amplification and impedance matching between a mini-plug mic and a USB port for sound input. I've used it recording music from a boom-box to a MacBook.
The tech specs state that the audio line-level in port is:
Input impedance greater than 20,000 ohms
Input level: Max 2 V rms (+8.2 dbµ)
I would look for a mic that meets those specifications. MacSpeech.com has several microphone/headset recommendations for use with their Dictate and iListen voice recognition software. I would think that their suggestions would be useful.

Similar Messages

How do i use an external display with my macbook pro?

How do I use an external display with a macbook pro?

Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example. Plug it in and it will be automatically recognized. Use System Preferences > Displays to set options.
The display can Mirror your primary desktop or Extend the Desktop.
Regards,
Captfred

How do I use an external microphone with iPhone Facetime?

Model of iphone doesn't matter to me. I have an Iphone 4S or Iphone 5 to use. I am specifically trying to use a wireless microphone set with Facetime so I can get better audio quality at a distance. Of course, I have a mount for my phone so it's pointed toward me. Can anyone figure out how I can bypass the internal microphones and use and external? I have already tried plugging into the jack on the phone, but no luck.
If there is some sort of adapter to plug into the Lightning port or 30pin that might bypass the external mics when using Facetime then I can go with that too.
Any help is appreciated!

Hello lizarose,
You might consider recording your video in the QuickTime Player application. The QuickTime Player application will allow you to control input sources for both your video and audio (allowing you to choose the Fast Track for audio and the iSight camera for video).
Once in QuickTime Player, choose 'New Movie Recording' from the File menu. In the resulting window, on the controls bar (near the record button), there will be a small triangle. This triangle will produce a menu allowing you to choose your Fast Track as the desired microphone.
Once the video is recorded and satisfactory, from the File menu, you can choose 'Export To,' then 'iMovie...' After the export process completes, open iMovie (close and re-open if necessary), and you should be prompted to import the video into iMovie. If, for some reason, iMovie is not an option, the video can be exported to the Desktop or the Movies folder (if exporting, choose 'Movie' for Format), then imported into iMovie via the File menu, 'Import,' 'Movies...'
QuickTime Player 10.x: Record video or audio
http://support.apple.com/kb/PH5871
QuickTime Player 10.x: Export a movie in another format
http://support.apple.com/kb/PH5878
iMovie '11: Import video from movie files
http://support.apple.com/kb/PH2153
Cheers,
Allen

Can I use iphone earbuds with a mac pro tower? And with an extension cord?

I also need to use an extension cable because of my standing desk (tower is on the floor). I get confused with the 2-band jack, the 3-band jack, etc. I haven't been successful using a regular, radio shack type of headphone extension cord. Salesmen give me a blank stare when I try to explain that I have iphone earbuds with a 3-band jack and that it doesn't work with a regular extension cord. It's like I'm speaking Swahili.

You can't using 4-band iPhone earphone with Mac Pro.
You need to get 3-band earphone and extension cable.
I've been using iPod shuffle's earphone with extension cable osn it works well.
http://www.amazon.com/iMBAPrice-iMBA-PS-12MF-12-Feet-Plated-Extension/dp/B009UEB UZQ/ref=sr_1_5?s=electronics&ie=UTF8&qid=1382758521&sr=1-5

How does one use an external microphone with the internal camera?

I want to use the internal camera because I don't have anything better but I want to use an external mic to record video and sound simultaneously, for a video blog. How does one accomplish this? I'm getting no help from the manual.

Try this. Connect your external mic, either through the audio line in port or, into a USB port if it is a USB mic and then go to System Preferences under the Apple and select the Sound icon under Hardware. Click on your mic shown in the list of input devices.
Hope that works for you.
Forest

How to use an external drive with 2 Macs?

Using an external drive for LR 5.4 files and can download and view without any issues on my MacBook. However, when the same drive is attached to my iMac I cannot download or view any files on the external drive that were added after March of this year. Any ideas on how to go about resolving this issue?

The following screenshot might be helpful. It shows where in Lr preferences you can configure which catalog Lr uses as the default. If you need to direct it to an external drive then use the 'Other' option to point to this drive then next time Lr launches set it back 'Load most recent catalog'

Using an external microphone with Premiere pro

Hey Guys, I'm new to this forum and I really don't know if you guys could help me with this. But I have bought a Samson C01U microphone a few days ago and I really want to use Adobe Premiere pro to record some guitar covers of myself. The problem is however; I record my video's with my sony handycam and I want to use my new mic to record the sound but when I press F5 (to capture a movie in Premiere pro) it still uses the microphone from my camera. What should I do?
I have already tried this: http://premierepro.wikia.com/wiki/Microphone
Thanks everyone
Stijn Jasper
~The Netherlands

This is how I do it at the moment: I start premiere pro and Audience. Then I turn off my speakers to make sure it doesn't get feedback from it. Then I hit record on both programs and sync up the video and audio lines after my movie is done (then I also disable the audio that my Handycam has recorded)
But that's a lot of work if you want to shoot many video's. There must be a better way right?
This is how I got my microphone enabled in Pr: http://kb2.adobe.com/cps/408/kb408222.html
It works, but only if I want to record AFTER I have recorded the movie (like a voice-over)
Any more ideas? (thanks for all the great reply's btw) you guys are really helpful

I am unable to use an external microphone on my MacBook Pro (17-inch Late 2008)

I have a dilemma. I wanted to use Skype on my MacBook Pro as I have before (successfully) but I have a new headset so I decided to plug it in and use it. I plugged the green headphone jack into the headphone jack on the side of the computer and did likewise with the pink microphone jack into the mic/line-in hole.
Skype seemed to work but I realized the audio output was coming through the headphone but the audio input was coming from the internal mic on the computer. I went into Settings and found the sound control. I tried to change from internal mic to external line in, which you can do, but there is no audio input at all then. Switch back to internal mic and all is well again.
The headset is new and works fine on my DELL so I know the issue is in the MacBook. If I open the sound conteol and unplug the headphone from the jack the computer knows and changes the settings right in front of me from headphones to internal speakers... as it should. The same does not happen for the microphone. Nothing seems to happen with the external line in port.
I have run out of ideas. Is there something I am missing here? All I want to do is use the mic on the headset instead of on the laptop. Seems simple enough.
Thoughts? Comments? Suggestions? Ideas??
Jim

A USB mic would be the best bet. Blue make some outstanding USB mics. I would just return the one that you've purchased and buy a Blue USB mic.
Clinton

Using an external mic with a mac.

I am trying to get an external mic to work with my MacBook. I have purchased a pre-amp which seems to work fine. I have tried to get my plantronics headset to work with the pre-amp but nothing happened when plugged in correctly. However, when I switched the plugs thinking I had them backwards, I was able to get a signal. I found the speaker in the headset was picking up the signal. In fact, it worked both with the preamp and without, although the signal was much fainter without the preamp. The preamp is designed for bringing up the signal to line lever for a mac.
Is there something I am doing wrong?

Hello Robert,
I came up with the same problem last week and the Genius Desk and support have no answer. Furthermore, Plantronics is saying it's an Apple problem. The only clue Apple provides is to try the device on a non-Intel Mac to isolate it further. Have you tried this? I'm attempting to get to work using SKYPE but I don't know anyone with an older Mac.
Carl

Use one Bluetooth microphone with both Mac and Windows 7

I would like to use a single Bluetooth microphone for dictation on the Mac side and on the Windows side. However, although I can get the microphone to work under both Snow Leopard (using DragonDictate) and Windows 7 (using Dragon NaturallySpeaking), I find that I must re-pair the microphone each time I switch operating systems.
Does anyone know of a way around this?

I had a mini which i used on both my powerbook at home and my pc at work. now with my new 30gb ipod, when trying to use at work I only have the option to re-format thus loosing all my music?? could you explain linux? (if that's a way to do it)
thanks
In short, no, you can't. An iPod formatted for Mac
can't be read by Windows, and a Windows Pod can't be
used by iTunes in Mac. You have to choose, or use
Linux.

Use an external monitor with my MacBook Pro

I have my MacBook Pro (13" Spring 2010) and I would like to extend my desktop over to my Gateway FH2300 however Lion is giving me some issues.
For one after I make my external monitor my primary monitor in the appearnce tab in Settings some apps appear on my MacBook Pro but I can't drag it over to my other dektop because my mouse cursor is confined to that monitor. In Windows 7 my 2 monitors work flaulsly and I can easily drag and work with apps in between both windows.
What can I do to fix this?
Thanks in advance.

Remember that your monitors probably aren't the same size. Look at the placement in System Preferences > Displays > Arrangement tab. Your mouse will only move over the section that overlaps. Places like the bottom of this sample it won't.

HT3131 Is there a way to use 2 external monitors with the MacBook Pro in closed clamshell mode?

My internal display on my MBP is having issues and occasionally displays white lines all over the screen. The current external monitor displays properly. Is there a way to use two extrernal monitors intead of one external + the internal display?
==========
Model Name:          MacBook Pro (17-inch, Early 2009)
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.93 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
NVIDIA GeForce 9400M:
Chipset Model:          NVIDIA GeForce 9400M
Type:          GPU
Bus:          PCI
VRAM (Total):          256 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0863
Revision ID:          0x00b1
ROM Revision:          3436
gMux Version:          1.7.10
NVIDIA GeForce 9600M GT:
Chipset Model:          NVIDIA GeForce 9600M GT
Type:          GPU
Bus:          PCIe
PCIe Lane Width:          x16
VRAM (Total):          512 MB
Vendor:          NVIDIA (0x10de)
Device ID:          0x0647
Revision ID:          0x00a1
ROM Revision:          3436
gMux Version:          1.7.10
Displays:
Color LCD:
Display Type:          LCD
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Main Display:          Yes
Mirror:          Off
Online:          Yes
Built-In:          Yes
Cinema HD:
Display Type:          LCD
Resolution:          1920 x 1200
Pixel Depth:          32-Bit Color (ARGB8888)
Display Serial Number:          *************
Mirror:          Off
Online:          Yes
Rotation:          Supported

Hi Mike, this isn't the first such problem report I've seen, perhaps another option...
http://eshop.macsales.com/item/Newer%20Technology/VIDU2DVIA/

Using an external microphone with a powerbook without webcam

I would think that using my powerbook as a phone would work really well, but I don't have a built-in microphone. Ae there any special features I should look for if I buy one? Or perhaps a special brand?
Thanks!

Okay, The 'Internal Built-in microphone' is selected in the sound department.
Processor speed 1.67 GHz, 1GB DDR RAM. Model? As far as I know it's a 15" Alum. Powerbook G4. Is there more to the model than that? It's almost 5 years old, time for a new one. But it's still working okay - knock on wood.
Anyhoo, I am going to try this. If it works, it's so much cheaper than a phone.
Thank you very much for the help, it's highly appreciated!!!
Kind regards,
Mildred.

How do I use two external monitors with my MacBook Pro?

I have a 21" monitor and a 20" TV capable of VGA connection, and my MacBooks model is 5,4 (late 2009), so it only has one mini display port. I have a VGA to mini display connector and use it lots. I work on multiple projects at once, and I'd like to be able to use three screens at once... any suggestions?

Just buy the proper adapter cord, such as MiniDisplay port to HDMI for example. Plug it in and it will be automatically recognized. Use System Preferences > Displays to set options.
The display can Mirror your primary desktop or Extend the Desktop.
Regards,
Captfred

Using an external disc with my mac

My 2007 imac has no more storage space. Can I operate Iphoto from an external disc? How can I set that up?

Hello Mayor,
Thank you for contacting Apple Support Communities.
One of our more experienced users answered this question in the following thread:
How do I change my iPhoto Library location, i.e. to an external drive?
https://discussions.apple.com/thread/5289554
Regards,
Jeff D.

Using an external microphone with a Mac Pro Tower

Similar Messages

Maybe you are looking for