Using an external non-Apple display on a MacBook Pro with Mountain Lion
On Friday I upgraded to Mountain Lion from Snow Leopard and now I am not able to use my 23" Samsung monitor exclusively as my display. I can mirror the MacBook Pro's display, but then my HD monitor's resolution is downgraded.
I used to start-up my MacBook Pro pushing the "On" button and then quickly closing the notebook. When it has started and the display was shown on my Samsung monitor, I opened the MacBook and all would be well. I had the benefit of the full HD resolution of my Samsung monitor, with all the menus and the MacBook's screen would be blank. If I follow the same steps now, the moment I open my MacBook, everything shifts back to the MacBook and the external screen only shows the background picture, with no menus.
I am a photographer and use the large HD-quality screen to see fine detail when I am doing editing. I do not like to work on two screens at the same time, and would prefer it to just keep on working in the same way as previuosly.
Can someone please give me advice on my problem?
This may help but then it may not. I tested it with my iMac and non-Apple second display so results may vary.
With both the MacBook and the second display powered on go to the Apple Menu > System Preferences > Displays > Arrangement
Drag the Menu Bar to the second display and then drag the display itself to the other side of the second display. This should allow acces to the dock and Menubar on the non-Apple display and achive your desired results.
Note: If I sleep my iMac the second display stops so you may need to keep your MacBook open to use these settings
Hope that helps
Similar Messages
-
Purchased a used macbook pro with Mountain Lion. My old Mac runs Snow Leopard is backed up to Time machine. How do I register the operating system to me and how do I use Time Machine to move my files to the new used computer?
If you look at the User Tips tab, you will find a write up on just this subject:
https://discussions.apple.com/docs/DOC-4053
The subject of buying/selling a Mac is quite complicated. Here is a guide to the steps involved. It is from the Seller's point of view, but easily read the other way too:
SELLING A MAC A
Internet Recovery, and Transferability of OS & iLife Apps
Selling an Old Mac:
• When selling an old Mac, the only OS that is legally transferable is the one that came preinstalled when the Mac was new. Selling a Mac with an upgraded OS isn't doing the new owner any favors. Attempting to do so will only result in headaches since the upgraded OS can't be registered by the new owner. If a clean install becomes necessary, they won't be able to do so and will be forced to install the original OS via Internet Recovery. Best to simply erase the drive and revert back to the original OS prior to selling any Mac.
• Additionally, upgrading the OS on a Mac you intend to sell means that you are leaving personally identifiable information on the Mac since the only way to upgrade the OS involves using your own AppleID to download the upgrade from the App Store. So there will be traces of your info and user account left behind. Again, best to erase the drive and revert to the original OS via Internet Recovery.
Internet Recovery:
• In the event that the OS has been upgraded to a newer version (i.e. Lion to Mountain Lion), Internet Recovery will offer the version of the OS that originally came with the Mac. So while booting to the Recovery Disk will show Mountain Lion as available for reinstall since that is the current version running, Internet Recovery, on the other hand, will only show Lion available since that was the OS shipped with that particular Mac.
• Though the Mac came with a particular version of Mac OS X, it appears that, when Internet Recovery is invoked, the most recent update of that version may be applied. (i.e. if the Mac originally came with 10.7.3, Internet Recovery may install a more recent update like 10.7.5)
iLife Apps:
• When the App Store is launched for the first time it will report that the iLife apps are available for the user to Accept under the Purchases section. The user will be required to enter their AppleID during the Acceptance process. From that point on the iLife apps will be tied to the AppleID used to Accept them. The user will be allowed to download the apps to other Macs they own if they wish using the same AppleID used to Accept them.
• Once Accepted on the new Mac, the iLife apps can not be transferred to any future owner when the Mac is sold. Attempting to use an AppleID after the apps have already been accepted using a different AppleID will result in the App Store reporting "These apps were already assigned to another Apple ID".
• It appears, however, that the iLife Apps do not automatically go to the first owner of the Mac. It's quite possible that the original owner, either by choice or neglect, never Accepted the iLife apps in the App Store. As a result, a future owner of the Mac may be able to successfully Accept the apps and retain them for themselves using their own AppleID. Bottom Line: Whoever Accepts the iLife apps first gets to keep them.
SELLING A MAC B
Follow these instructions step by step to prepare a Mac for sale:
Step One - Back up your data:
A. If you have any Virtual PCs shut them down. They cannot be in their "fast saved" state. They must be shut down from inside Windows.
B. Clone to an external drive using using Carbon Copy Cloner.
1. Open Carbon Copy Cloner.
2. Select the Source volume from the Select a source drop down menu on the left side.
3. Select the Destination volume from the Select a destination drop down menu on the right
side.
4. Click on the Clone button. If you are prompted about creating a clone of the Recovery HD be
sure to opt for that.
Destination means a freshly erased external backup drive. Source means the internal
startup drive.
Step Two - Prepare the machine for the new buyer:
1. De-authorize the computer in iTunes! De-authorize both iTunes and Audible accounts.
2, Remove any Open Firmware passwords or Firmware passwords.
3. Turn the brightness full up and volume nearly so.
4. Turn off File Vault, if enabled.
5. Disable iCloud, if enabled: See.What to do with iCloud before selling your computer
Step Three - Install a fresh OS:
A. Snow Leopard and earlier versions of OS X
1. Insert the original OS X install CD/DVD that came with your computer.
2. Restart the computer while holding down the C key to boot from the CD/DVD.
3. Select Disk Utility from the Utilities menu; repartition and reformat the internal hard drive.
Optionally, click on the Security button and set the Zero Data option to one-pass.
4. Install OS X.
5. Upon completion DO NOT restart the computer.
6. Shutdown the computer.
B. Lion and Mountain Lion (if pre-installed on the computer at purchase*)
Note: You will need an active Internet connection. I suggest using Ethernet if possible because
it is three times faster than wireless.
1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
Utilities window appears.
2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
on the Erase tab in the DU main window.
4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
and set the Zero Data option to one-pass.
5. Click on the Erase button and wait until the process has completed.
6. Quit DU and return to the Mac OS X Utilities window.
7. Select Reinstall Lion/Mountain Lion and click on the Install button.
8. Upon completion shutdown the computer.
*If your computer came with Lion or Mountain Lion pre-installed then you are entitled to transfer your license once. If you purchased Lion or Mountain Lion from the App Store then you cannot transfer your license to another party. In the case of the latter you should install the original version of OS X that came with your computer. You need to repartition the hard drive as well as reformat it; this will assure that the Recovery HD partition is removed. See Step Three above. You may verify these requirements by reviewing your OS X Software License. -
I have a MacBook Pro with mountain Lion, I was wondering if I could use dictation or any other application to have a voice password.
I'm not aware of any application that will allow this. Most applications won't launch until after you login (which would include any utility that could do this). I'm not sure how much use there would be for something like this. For obvious reasons, a spoken password isn't particularly secure. I would imagine a blind person using a computer would still be able to manually enter a password. I would make sense for folks with other types of disabilities I suppose... so long as there isn't anyone around whenever they use their password.
-
HT1619 How do I disconnect an Apple remote from my MacBook Pro w/ Mountain Lion update?
My friend set up Apple TV while I was using my laptop in the same room and the remote is now connected to my laptop. I've looked at a bunch of different sites and forums trying to figure out how to disconnect it and it seems that with the new Mountain Lion operating system, there is no way to do this. PLEASE HELP it's driving me crazy because everytime he presses a buttom on the remote, it interferes with what I'm doing.
Sorry, but my late 2009 MacBook Pro running Mountain Lion continues to be be controlled by the ATV2 remote after disabling remotes in system preferences. Anyone else having the issue or has a solution?
Cheers! -
im a college student im studying to be a vet tech and i want this computer too last which a more sound investment the non retina macook pro 15 inch with these specs:2.6 ghz 1 tb ata hd with 8 gb of ram or a maxspec 13 inch mac book pro: 2.9 ghz 1Tb and 8gb of ram any help is appreciated thank you
Hi,
I am a researcher so I store a lot of papers, data, and use numerical software. I have had a 17inch high spec macbook pro for over a year now. I find that apart from the large screen, it was unnecessary to get the high specs. This is why. Firstly, the hard drive is easy to replace and upgrade, apple charge a lot for their own ones. Secondly, the ram in my one was upgradable (which i didnt know when i bought it) and i since upgraded to 16gigs from 8 and its amazing. Thirdly, the newer macbook pros run hotter than the previous ones.
The retina is overrated and the programs for retina need more memory and processing power, so what you find is that your hard drive will get taken over sooner, your mac will run hotter, and battery life lower.
I would say to you, dont worry about the processor speed, the normal speed offered is perfect, more than that is not necessary unless you are running highly demanding apps, the mac will run hotter too. Dont bother getting a large hard drive in the macbook. Get a flash SSD drive, and buy a good portable 2tb HD, like a WD one, and use that to store as much of your work as possible. I believe apple started soldering their ram cards to the motherboard or something so that people cant upgrade. Check in advance and see if the macbook you want can be ram upgradable, then get a lower ram model and buy good 8gb ram cards to make 16gig. Very very easy to install them, took me about two minutes to do mine, it will be much cheaper.
If I think of anything else i will post back. Dont forget to install GFX card status too and use integrated only when on battery, i get up to ten hours of battery life without wifi, around 8 with wifi.
edit. I forgot to mention that if you buy your mac and try to open it you will void the warranty. -
help me in this regard........i m facing a lot of difficulties
I think this is a router problem, not a problem with the Mac.
I can join other networks just fine, I can see packets being sent to and from the router by other computers...
The router accepts my WEP key and assigns me an IP, but nothing more after that. I've reset the router through the button on the back and software reset to defaults. Nothing helps. Other computers can join the network, but some of our other notebooks cannot connect to the router, so it's not just a mac problem.
So I'm going to mark this as answered... thanks for you help M@C$4l!f3
Message was edited by: M@C$4l!f3 -
I have a late 2011 model MacBook Pro running Mountain Lion. I love the AirPlay mirroring feature with Apple TV...BUT, how do I mirror with TVs that don't have Apple TV? I used to run a cable from my mini display port to the HDMI input of a TV. This feature seems to be lost in the Mountain Lion upgrade. Did Apple feel that once Mountain Lion came out that EVERYONE would have Apple TV? There are no settings in System Preferences/Display like there used to be...only for AirPlay Mirroring.
Running a cable to the HDMI port is still supported. (and still works on mine).
If the Arrangement tab in System Preferences > Displays isn't present then it doesn't recognize the physical connection. Double check all cables. If that doesn't work try a PRAM reset:
http://support.apple.com/kb/ht1379 -
Is there are a way to use my imac as a display for my macbook pro? I have a thunderbolt cable but it doesnt seem to do anything
Hello eassic,
Thanks for the question, and welcome to Apple Support Communities.
It sounds like Target Display Mode may be what you are looking for:
Target Display Mode lets you use a Mac as the external display for another “primary” Mac. In some cases, you can also play the sound from your primary Mac on the speakers of the external Mac. For example, a MacBook Pro could use a 27-inch iMac as the display and play its audio on the iMac as well.
OS X Mountain Lion: Use another Mac as a display
http://support.apple.com/kb/PH11302
Use an iMac with Thunderbolt as a display
If you have an iMac with Thunderbolt, any other Mac with Thunderbolt can use it as a display. The iMac will play both the video and audio from the other Mac.
1. Connect the Thunderbolt cable to the Thunderbolt ports on each computer.
2. Make sure both Mac computers are turned on and awake.
3. Press Command (⌘)-F2 on the keyboard of the external display Mac.
4. If you want the external display Mac to play audio as well as video from the primary Mac, choose Apple menu > System Preferences, click Sound, and then click Output. Select the external display Mac from the list of devices.
Thanks,
Matt M. -
Non-Apple SSD upgrade of MacBook Pro and trim enabling
Hello.
I have a question about non-Apple SSD upgrade of MacBook Pro. I was planning to go and buy an SSD in a couple of days but I have coincidentally come up with a web page mentioning trim enabling to extend SSD life on MacBook Pros. Actually the article suggested that if trim is not enabled, the SSD performance degradation will start very quickly due to a high number of writing and deletion of data to the same location on the SSD. Apple's original SSDs are really expensive, I checked that. Is there anyone who upgraded with a non-Apple SSD and did not enable trim and realize the SSD performance degradation? Is there anyone who could easily enable trim and is using his Mac efficiently with a non-Apple SSD? I will be glad if you could share your experiences. I really want to improve the speed of my Mid 2012 13 inch MBP but I have to be sure before doing that. I am also planning to buy a Samsung Evo 840 250 GB SSD.
Regards and thanks in advance,
BugraYes you need to install and run TRIM Enabler after your OS X is installed or reverse cloned onto the GUID/OSX extended Journaled formatted SSD from a external boot clone drive of the previous internal drive.
Also you need to run it after some OS X updates and of course upgrades, you'll notice the immediate performance drop if you don't.
It's available over at MacUpdate.com, you'll have to right or control/alt key click to "Open" it to bypass OS X Gatekeeper.
Read these user tips, you can clone your present internal drive to the new SSD using a SATA to USB adapter/Carbon Copy Cloner (not Superduper) and then reboot and hold option/alt key down on a wired keyboard to boot from it and test before making hardware switch.
Make a bootable clone of your boot drive
Upgrading Your MacBook Pro with a Solid State Drive
Install/upgrade RAM or storage drive in Mac's
Of your going the fresh install or + TimeMachine restore route, then also read this
Reset your Mac -
How do I open non apple apps on my macbook pro
How do I open non apple apps on my macbook pro? I can't open ever since I downloaded os x maverick
If you already changed System Preferences > Security & Privacy > Allow apps downloaded from: to Anywhere then issue is not Gatekeeper which is the built-in service that prevents apps from unidentified developers from being executed. It's possible that you need to either reinstall the App or maybe is simply not compatible with Mavericks yet. In any event you should be able to at-least look for a crash log for more information.
-
Sir / Madam
Actually I am willing to buy Apple (MD101HN/A) 13" MacBook Pro with Retina Display 2.6GHz.
I am from siliguri, Dist Darjeeling, West Bengal, India. But currently i am unable to buy your product due to unavailability of your mentioned product in India. so can you please inform me at least a confirmed date when will be the product available. because it's really a urgent for me. So please give a reply with a confirm date.
Yours Faithfully
Saikat Nath.This board is just other users, there's no one here from Apple to answer a question like that. Sorry.
-
The tap to click does not work with mountain lion as it did before the mountain lion install. I purchased a brand new imac in August of 2011 and got a wireless keyboard and selected the wireless trackpad instead of a mouse. The trackpad worked wonderful pre upgrade with tap to click. Now after the install of the newest beast, I have to actually press the trackpad rather than a slight tap. I have carpel tunnel and this is causing great stress upon my hand. How do I get apple to fix this major issue with mountain lion?
Perhaps, I was not clear enough.
I have an imac purchased in Aug. 2011 which came with Lion 10.6 (two uprades before mountain lion)
Recently, I just purchased a macbook pro retina with Mountain Lion
On my imac, my settings allowed me to "tap to click" everything EXCEPT the initial log in at the star up of my imac, again running Lion 10.6
On my macbook pro retina which has Mountain Lion, I set up the "tap to click" option, but notice that a "hard" click was neccessary when trying to click things. I thought this was a macbook thing (my first one) so I went and upgraded my imac to Mountain LIon, BIG MISTAKE! Now both my imac AND my macbook only have limited "tap to click" options. Before mountain lion I could "tap" to highlight and select text, tap and drag, and many other thiings that Mountain Lion has disabled.
I am truly surprised that no one has noticed this MAJOR issue.
Is there a way to uninstall this update, similar to how on a PC you can go back to a restore point.
On another note even the way PREVIEW has changed is less user friendly, there used to be icons on the bottom right corner of the screen, now I have to double tap and select the option I would like to switch between contacts and thumbnails. This is really annoying and is causing me time when reviewing files.
Just in case anyone was wondering, I did go to system preferences -> trackpad -> select tap to click
In fact almost all of the trackpad functions have been selected. -
Dear all, I have just bought a MacBook pro with osx lion on 25th last month. I wanted to know if I can use the methods described above to update to osx mountain lion or I have to buy osx mountain lion from the app store?
Here are the rules to qualify for the free upgrade:
http://www.apple.com/osx/uptodate/
(has to be purchased from Apple or authorized reseller). -
Dear Sirs, I have a apple macbook pro with mointain lion OS 10.8.4 with mail 6.5 and I cannot open the .eml attachments, what can I do to solve this?
drag the file to the desktop, then using the menu item "File > Get Info…"
in the "Open With" section select "Mail" from the list and then click the "Change All…" button to make Mail the default application for all .eml files -
I have a Macbook Air with Mountain Lion..I upgraded to the latest version called mavericks ox now it crashes a lot...when I use the shift and Caps keys especially. I now have version 10.9. how can I get mountain lion back and get rid of this update?
all of my software was current before i upgraded to maverick....i don't know why this is going on...any help?
Maybe you are looking for
-
Adding a Left Navigation in the place of Current navigation in SharePoint 2013 Site.
Hi All, I have successfully converted an HTML Page to a SharePoint 2013 Master Page. I also created a Custom Page Layout. Using both them I have created my SharePoint Site with 30+ pages. Each page is consisted with the Top Header Navigation as it is
-
Software To Create Interactive Training DVD
I have a new project I am working on. A interactive training DVD. I invision a split screen. One side text or still photos. The other side a video demonstration on the subject matter. There needs to be 2 controllers. The 1st would allow the viewer to
-
Macbook Pro master volume changed by iTunes
Running Lion but this problem has existed under prior OS versions. I have had a symptom where the master volume level changes on its own. For example, It set it to full volume then sometime later notice that it is set to about 40%. Today I finally du
-
Hi, I have a report with the following design TEXT1 REPEATING FRAME TEXT2 TEXT3 If the repeating frame query return too many records, the REPEATING FRAME is pushing TEXT2 to a second page, which is correct. The problem is that TEXT2 is pushed to a se
-
Is there any way to set a common custom containerRenderer for Portal? We developed a custom containerRenderer, that renders the portlet frames. This can be set as renderer for our portlets in provider xml. <containerRenderer class="..."/> Problem is