Using an iBook G3 on and Airport Extreme Network

Hi,
We currently have an iBook G3 800 MHz (no airport card) and are planning to get a new superfast 24" iMac 3.06 GHz. My son will be getting a newer MacBook (assumedly with Airport Extreme built in) through school.
My question: If we set up an Airport Extreme wireless network, will including the old iBook (since it has only non-Extreme Airport potential) slow the rest of the network down, and, if so, would the slow down be enough to notice?
Would upgrading the OS on the iBook (currently 10.3.9) matter?
Thanks,
Rob S.

Hi, Rob. Welcome to Apple Discussions.
+If we set up an Airport Extreme wireless network, will including the old iBook (since it has only non-Extreme Airport potential) slow the rest of the network down+
Yes.
+would the slow down be enough to notice?+
Probably not (at least for the internet). If you're swapping files between computers, it will slow that down on your network, but not troublesomely so (at least, not in my experience). The way I understand it, unless you have internet access in excess of 11 MB, you are not going to slow your internet experience down at all by having the iBook up and running on your network. We use ours on our 10 MB internet and don't see a slowdown with our newer computers when the iBook G3 is on the network.

Similar Messages

  • PC Used to work with XP and airport Extreme Basestation but not with Vista

    Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

    With regard to your printer problem - take a look at this discussion:
    http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

  • Extending and airport extreme network with wired connection to a express

    I am getting fed up of deadspots in my house that now seem to have become much worse recently. After giving up on configuring my extreme router to avoid issues I now want to extend the network.
    If I put in a network cable from the extreme router to an airport express on the other side of the house can this be configured to be the same wireless network?
    I know express routers have an option of extending the network is this for wired or wireless or both and if I do this will it show up as one wireless network with no interference issues?. At the moment I am planning on getting an express airport and using some of those power cable ethernet adapters to link the two routers up should this work okay?
    Many thanks
    Andy

    Welcome to the discussions, Andy!
    If I put in a network cable from the extreme router to an airport express on the other side of the house can this be configured to be the same wireless network?
    Yes, post back if you need more details about this.
    and if I do this will it show up as one wireless network with no interference issues?
    There will be no interference issues between the AirPort Extreme and AirPort Express. However, if you live in an area with a number of other wireless networks around you, or you have cordless phones, there may well be some interference issues to tackle.
    I am planning on getting an express airport and using some of those power cable ethernet adapters to link the two routers up
    That should work assuming that both ethernet powerline adapters will be on the same master electrical circuit. I would suggest that you get a clear understanding of the store's return policy though...just in case.
    Message was edited by: Bob Timmons

  • Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

    I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
    I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

    trying to find out same thing , store said works with new intel processor, My mini dont finding.....

  • Is it possible to access my DVR from the Internet using an Airport Express and Airport Extreme?

    I would like to use my Airport Express to connect to my DVR and use it to access the Internet by setting it up to wireless extend my Airport Extreme network?
    This would allow me great flexibility to place the DVR wherever I wanted.  I would create a static IP address for the DVR but would I also have to create one for the Airport Express as well?  What would I put as my Gateway address?  Would it be the IP address of the Airport Extreme or the Airport Express?
    Looking forward to the advice to see if this is possible...

    It may not be compatible with the iPad. See below for reference.
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

  • Is the Time Capsule wi-fi router compatible with the Nest thermostat? I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?

    I've read where there are issues with the Nest and Airport Extreme (AE)? Is AE used in the Time Capsule?
    If so, i already have a wi-fi router, so can the Time Capsule simply be used for wireless backup instead of as a router if there is conflict?

    A TC is fundamentally a AE with a sata chip included to drive the hard disk. Some slightly different bios to include disk functions, although most of those are also on the AE. So as a router it is 99.999% identical.
    And yes, if you have another router you can easily bridge the TC and use wireless for backups and internet connection. Once you no longer route through the TC the issues with most NAT problems including port forwarding should disappear.. mostly this is due to all apple routers using NAT-PMP instead of upnp which is the near universal standard for opening ports.. without upnp apple keep their routers more exclusive.

  • New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

    new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

    See the info here about sharing or using the TC for data.
    Q3 http://pondini.org/TM/Time_Capsule.html
    It is extremely important you realise.. the Time Capsule was never designed for this.
    It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
    It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
    The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
    iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
    Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

  • Verizon DSL and Airport Extreme

    I'm going to add aniBook (oe whatever Apple will call it by then) this spring, as I want to enjoy the wi fi fun like evryone else. My ISP is Verizon DSL, and I was wondering if anyone else here in the discussion board is currently using an Ibook with Verzion DSL and Airport Extreme. I think Verizon has a modem that supports both wired and wireless networking--which is what I'll need since I won't be retiring my iMac G5 anytime soon. So any adive or info would be appreciated.

    I currently have the ActionTech Modem (supplied by Verizon) as my wireless router, but would like to replace that with my Airport Extreme. Can this be done?
    You will need both. Since both supply NAT, DHCP services and WiFi Access Point, you will have to turn off all three of those in one of them. This is usually called putting the device in "bridge" mode. My recommendation is to turn off those features on the Actiontech modem/router/access point, turning it into a plain DSL modem, and let the AEBSn do all the 3 features (NAT, DHCP, AP).

  • Verizon DSL, Westell 6100 modem/router, and Airport Extreme

    Useful info so you won't have to go through what I did.
    Verizon ISP using the Westell 6100 modem/router & Airport Extreme.
    The Westell 6100 was configured during installation as a modem and router with a direct connection to the Mac. You can actually connect Airport Extreme at this point with an ethernet connection to the Westell and it will work, but you can't do any of the sharing things (remote login, personal web sharing, etc.) To do those things the Westell needs to be in the Bridge mode. In a nutshell, you have to edit the Westell's VC configuration to establish Bridge mode, and disable its DHCP server. Then you have to set up the Airport to connect using PPPoE using the Account Name and Password from Verizon.
    1. With the Westell connected directly to the Mac, access the device at 192.168.1.1.
    a. Under VC Configuration the first of seven configurations should already be enabled as VPI 0, VCI 35 using PPPoE. Edit that one and change it to Bridge mode.
    b. Under DHCP configuration, disable the DHCP server. You can also do this under the Private LAN Configuration page. If at the latter, do not attempt to disable the Private LAN (it won't let you anyway). Verizon tech support kept insisting I had to disable the Private LAN, which caused a great amount of anguish!
    c. Before leaving 192.168.1.1 (you won't be able to access it again once the Airport is connected and configured) make sure you know your ISP account name and password. This was assigned during my setup procedure with Verizon, a random selection of letters and numbers.
    2. Now hook up the Airport WAN to the Westell's ethernet port and the Mac to the Airport LAN. Fire up Airport Admin Utility.
    a. Under the Internet tab, select Connect Using PPPoE.
    b. Configure PPPoE using the Verizon Account Name.
    c. Change password to the Verizon account password.
    3. Restart and that's it.

    Thank you for your post. When I moved to another home, Verizon sent me the Westell 6100 and I had been having trouble staying connected to the Internet with my Airport. Last night, I loss wireless access and the Airport status in the menu bar read "Looking for a PPPoE connection". Verizon customer support was able to get me back online, albeit with only a direct Ethernet connection between my iBook and the 6100.
    I found your post and followed your instructions. Now all the iBooks in our household are back online via the Airport. Thank you very much!
    iBook G4 933Mhz   Mac OS X (10.4.7)  

  • How do I extend my AirPort Extreme network using airport express

    How do I extend my AirPort Extreme network using airport express

    see http://support.apple.com/kb/HT4145 and other support articles
    and/or
    https://discussions.apple.com/thread/4462789?start=0&tstart=0
    and many other discussions on this forum about this topic.

  • How to connect my iPad, Brother printer, and AirPort Extreme?

    How to connect my iPad, Brother printer, and AirPort Extreme?

    I don't believe any of the Brother printers are AirPrint-enabled. Is your Brother printer network-ready? That is, does is support either/both a wired or wireless connection or just uses USB to connect?

  • Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

    Hello -
    I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
    I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
    I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
    Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
    Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
    Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
    Thanks a lot,
    -TM
    AirPort Exteme:
    Time Capsule:

    Hello JuliaApple. Welcome to the Apple Discussions!
    You have several ways to configure both base stations for what you are trying to do.
    The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

  • How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?

    How do I prevent other Mac users from changing my Airport Extreme Network Name and Password within the Airport Utility?  My company is using an Airport Extreme in our office now and I want to prevent other employees from messing with the network/settings.  Is there a way to place a password on the settings to allow only the admin to access the network name and password? 

    Hi - you have will have to change the device passwords on all the base stations and then don't give them to anyone except the administrators and tell them not to save them on their computers that use the older versions of the Airport Utility - for the newer versions like the mobile apps, as soon as you enter the pasword it is saved and is visible in the advanced pane along with the network password - so if anyone gets a hold of your iPad or iPhone, they can edit the whole network - I have this same issue with my networks in the office and it is inconvenient but doable - I hope this helps

  • Macbook pro and airport extreme don't work

    A friend (and all those tv commercials) say everything just works with Macs. Well, not exactly. New Macbook Pro and Airport Extreme can't connect me to the internet. I still have PC connected via ethernet cable to my cable modem and router which is in the basement where the cable enters the house. I've tried the different options in Airport Extreme setup and nothing works. It doesn't help Apple assumes I know everything about DHP PPPOE NAT or whatever all those silly things are.
    Can anyone explain in +very simple+ terms how I get this expensive piece of aluminum connected to the internet?
    Thanks.

    Hello sofarapplesux. Welcome to the Apple Discussions!
    I assume that you will continue to use the modem and router in the basement to get your Internet access ... correct? What is the make/model of this router?
    If that's the case, I will also assume that you have the 802.11n AirPort Extreme Base Station (AEBSn) connected by Ethernet to this router ... correct?
    So your overall network configuration should look something like the following:
    Cable modem > (Ethernet cable) > \[Internet port] router \[LAN port] > (Ethernet cable) > \[WAN port] AEBSn ... close?

  • Can I use non-apple notebook to connect AirPort Extreme?

    I
    Can I use non-apple notebook to connect AirPort Extreme?

    He might be trying to do so to promote his products or may be there was some misunderstanding.
    Airport Extreme will work as a wireless router supporting upto 50 systems including Mac computers, PCs, iPad, iPhone, iPod touch, Apple TV and virtually all 802.11a/b/g/n Wi-Fi wireless devices — all at the same time.
    for reference http://store.apple.com/us/product/MD031LL/A/AirPort-Extreme

Maybe you are looking for