Using an IDOC sending the same message in two different format

i have a message which i have to be sending from one SAP system to another, but the message should be split into 2 different formats using mapping and send to one receiver where the 2 messages are segregated using some ID number. here we will be using IDOC for sender.
kalyan.

Hi,
I think you can go for the multimapping(1:2) and not exactly splitting the message but mapping it one source to two different targets that need to be sent to one receiver...
Just see these blogs on that..
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
You need to go for enhanced interface determination.
Thanks,
Vijaya.

Similar Messages

Send the same message to two receivers with some time difference..

Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .P

Hi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury

How to send the same message to two SMTP servers

hi,
I need to send a message to two different SMTP servers.
I want to avoid the creation of new MimeMessage with a new Session.
the only way I've found was to keep a reference to the Properties instance that was used in the Session creation, and modify its "mail.smtp.host" property.
Is there another way? I must be missing something.
thanks,
ofer

hi,
I've already found the solution, so I'll post it here.
first I'll explain the purpose:
I needed to send the same message to a normal email server, and (for some of the recipients) to a special SMTP server that is on a different machine.
the following code demonstrate the solution.
thanks for your help.
ofer
----------code---------------
public class MultipleSendTest {
private final static Session server1 = createSession("somesmtp_server.com");
private final static Session _server2 = createSession("another_smtp_server.com");
public static void main(String args[]) throws Exception {
//create the message
MimeMessage m = new MimeMessage(_server1);
m.setText("body text");
m.addRecipients(Message.RecipientType.TO, "[email protected]");
m.setFrom(new InternetAddress("[email protected]"));
//send
send(m, _server1);
send(m, _server2);
private static void send(MimeMessage message, Session session) {
//for logging only
String host = session.getProperty("mail.smtp.host");
try {
Transport transport = session.getTransport("smtp");
transport.connect();
transport.sendMessage(message, message.getAllRecipients());
System.out.println("sent to " + host);
transport.close();
} catch (MessagingException e) {
System.out.println("failed to send to " + host);
private static Session createSession(String host) {
Properties properties = new Properties();
properties.setProperty("mail.smtp.host", host);
return Session.getInstance(properties);
----------code---------------

Can we send the same message two different recievers with sequence

Hi,
i am sending the same message to two different receviers without using BPM.
now i require to send with sequence.is it possible without BPM?

Hey
There are two options for this
First one is to use Wait step in BPM as other experts suggested.
Second one is a dirty way around,what you can do is send the second message to a dummy receiver first(may be a file on your XI server),then design one bypass scenario which will pick up the file after a specified time interval(give the poling interval you want).
i would go for BPM coz its pretty straight forward,but in case you want to avoid BPM then u can use the second approach
for bypass scenario,have a look at the following
How to send any data (even binary) through XI, without using the Integration Repository

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in

If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this.

Receiving the same messages on 2 different iphone

Hi guys,
Just recently got my iphone 4S and i got some issue here...
I have been receiving the same imessages on two different phones. The other one was my brother iphone 4s.
Whenever i send myself a message, i will get the repeated message and my brother too will get the same message.
I wonder how it happened?
Let me explain how i activate my iPhone 4S.
First i used my brother simcard with my iPhone 4S to activate the simcard. Then i using his itune to unlock the phone. But i didnt synchronize though.
Then this thing happend...
What should i do? Do a restore???
Please help...
Thanks...

Have you used the same Apple ID for both phones?
If so, it is iMessage, it syncs your messages across all devices that have the same Apple ID.
If so, go into Settings, Messages, and change the Receive at addresses.

Use two indicators for the same variable in two different VIs

hello, I want to use two indicators for the same variable in two different VIs running at the same time
should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated
I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
what should I do?
thank you in advance
cordialy
Attachments:
projet.zip ‏13 KB

CrisSTine01 wrote:
hello, I want to use two indicators for the same variable in two different VIs running at the same time
I'm a huge fan of User Events to send updates to GUIs from who knows where.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can i use the same id on two different laptops?

When trying to use the same login on two different laptops so that i can connect my nook to either depending on which one is free, i get the error that the id is already in use on another computer?

The issue is embedded in the way the software works. To comply with the
Digital Millenium Copyright Act of 2000, all software companies in this
business keep track of where their software is installed, making
information about the computer and ereaders part of an ID file. So, your
user ID is embedded in the ID file of each computer, but each computer has
a different ID of its own that is also embedded in that file. Adobe's
master server (yes, there is one that you connect to even if you didn't
know it) also has that information, and when you try to use an ID on one
that's embedded in the file of another, Adobe's server blows the whistle,
and as you can see, you can't do that....
==========

HT2498 If I use camera window to download my pictures to my computer, and then I copy and paste the pictures to iPhoto. Would I be ending up having the same pictures in two different files in my computer, and so wasting space in my hard drive?

I recently bought a canon camera. The instructions of the camara recommend to use the canon software (camara window) to download pictures to my computer. I would like to have my pictures in i-photo because it syncs them to my ipad.
I want to download the pictures from my camera to camara window, and then drag and drop the pictures to i-photo. If I keep my pictures in both programs would I be wasting space in my computer hard drive by having the same pictures in two different files?

Yes.
Ignore the Canon software. It gains you nothing and adds complexity. Just use iPhoto for the lot.
Regards
TD

Is it possible to use the same Switch for two different clusters.

I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.

user9198027 wrote:
I have 10g Rac setup on windows.
Now I am planning to install 11gR2 on different servers.
Is it possible to use the same Switch for two different clusters.
Yes. Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

How to handle an update of the same record from two different user JSP

how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

I'm not sure whether I understand your question. If one user changes a record then you would like other users to see those changes. Normally those changes will be visible to other users when they refresh their browser, after the first user has committed changes to the record. I you want to be sure that the same row isn't updated at the same time by to different user, you need to configure some locking (pessimistic locking) - this depends of what technology you use. In EJB3 pessimistic locking is performed by adding a version to every entity object. If you are using ADF, the framework is able to handle either pessimistic or even optimistic locking.
If you want the changed row to be updated in other users browsers without any user interaction by these users, you should take a look at Reverse Ajax (ex. DWR http://ajaxian.com/archives/reverse-ajax-with-dwr) - or Ajax in general. But you will never get a realtime solution, where changes is visible in other users browsers right after each record update.

HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

Can I put the same information on two different i-phones with different numbers and different ID's?

Yes and no it really depends on what information you are putting on the devices.

Urgent ! Assigning (or Linking ) the same workbook into two different roles

Hi Gurus,
Coul you tell how to link the same workbook to two different roles.
I am assigning the same workbook to two different roles, but in the second role the workbook is displaying with different structure than in the first role. I want the workbook should be displayed with same structure in both the roles.
This is Urgernt.
Thanks in advance.
Best regards
Hari

Hello hari,
Both the roles should diplay the same layout for a single workbook.
please ensure that both the users(with these 2 roles) have similar (all the other)authorisations.
it's possible that one of the users may have further restrictions in authorisations. check out for z-authorisation objects if any.
hope it helps..
thanks,
(*Don't forget to Assign points on SDN)

How to handle an update of the same record from two different user in JSP

how to handle an update of the same record from two different user
how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

Usually, if two users try to update the same row at the same time, you want the first to commit to succeed, and when the second commits, they should fail with the error that the row was being concurrently updated. They you may want to show them the new row values and give them the opportunity to merge their values with the new row values...
How can you achieve this? Google optimistic locking.

How to use rule and send the same email to multiple recipents

Hi,
My requirement is to send the workitem to the multiple recipents. one of my reiend suggest me to use the rule but i don't know how to use that .
can any one of you suggest me how to use rule in workflow.
Also i want to send the same email to multiple recipent .how can i do it by using the multiline variable...please advice me with example if possible..
Note :- Is it necessary to saparate the email id with comma or i will add all the email next one another..
Please suggest.
Thanks in advance ,
Anand

Hi Anand,
I would suggest you first follow the guidelines of the forum and a little searching. One of your questions has been asked just a few threads below.
Regards,
Martin

Using an IDOC sending the same message in two different format

Similar Messages

Maybe you are looking for