Using an N9 SIM Tray in a Lumia 800

Hi everyone
My Lumia 800 has a damaged SIM tray, it not longer sits flush with the phone.
I have tried everywhere to find a replacement with no luck.
I have however managed to source an N9 SIM tray. Am i right in thinking that these phones are virtually identical and that this should work in my Lumia?
I have read countless posts and watched many many videos showing the SIM trays on both, and they look identical, but can anyone confirm?
The seller of the N9 tray seems to think it will not fit , but i am sure it will.
Any help would really be appreciated.
Regards
Guy
Solved!
Go to Solution.

cjlim wrote:
Knowing Aspergerguy, he is probably in the process of putting the sim trays back into his N9 and Lumia 800 as we speak.
You know me too well, unfortunately I learnt the hard way of attempting to use Lumia one in N9 when moving one trimmed SIM between the two devices, but haven't to date tried N9 one in Lumia 800.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

  • Sim Tray Replacement - Lumia 928

    Where can I find a replacement SIM tray for my Lumia 928 (Verizon, of course)?
    eBay has one listed and I am losing the bid so far.
    Thanks,
    Solved!
    Go to Solution.

    you can try amazon, or ebay.
    just don't lose it! not much choice you have, so may as well buy it.
    they usually have a buy now price.

  • Blackberry Passport sim tray issue is prevalent and they will not fix it for you because it is your fault. Ridiculous.

     I bought my Blackberry passport on Feb 13rd. Right out of the box the sim tray didn't read the sim. I thought it is my sim's problem, so I waited for another sim. New sim came in, still didn't read. After a long call with customer support and BB virtual support, I had my device sent in around mid March. They checked it and said I damaged the sim tray and I need to pay 268$ to have it fixed. I though it is ridiculous since I haven't done anything to the phone. So I argued with them and eventually they agreed to have my fixed without cost.
     However when they sent me back the device, I poped in the sim and it only works for 1 day, on and off the second day and then not reading the sim at all after that. I think the sim tray's problem with the passport is prevalent and the pin can be broken by the simple act of poping in the sim card. My ATT sim is working perfectly fine on the 5s and my brother's iphone 6.
     After 2 days of receiving the "repaired" device, I call them again and this time they said it is certainly my fault and if I send it in again, I will have to pay 268$ to have it fixed.
     So I thought for people out ther if you have a passport, don't pop in and out the sim card. It can really easily be broken.
      For me, I think now I just gonna use my "broken sim tray new passport" as a reading device. After 10 years, I will officially switch to other brand. Still love the keyboard though, but anyway.

    Check that your sim card does not have a burr or edge on it before you insert it, as that may be what's damaging the SIM pins.
    Site anly allow linlks to web images, so here's what the tray is supposed to look like - with the SIM cover on.
    FWIW - a T3 torx driver is required to remove the screws around the SIM  and TF card tray cover. That would allow you to look at the underlying pins - and possibly - with a bit of luck, fix them on your own.

  • Lumia 800 in Malaysia

    I have just found out that the Lumia 800 does not support some important operator codes in Malaysia. There is apparently nothing that Nokia or the operators intend to do about this so if you are thinking about buying a Lumia in Malaysia, please check that you can use your operator codes, especially *128#

    The Lumia 800 will be launched in other countries at later dates, though we cannot presently give you any information concerning when certain specific countries will see specific products.
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • Lumia 800 sound option

    is there any way to adjust the volume for calls while using the earphone/headphone which comes with lumia 800 package?? the sound is too loud and i could not reduce the sound, besides, right after the call, if i listen to misic, the volume option is not working and is too loud.

    Hello,
    I have the same issue, I cannot use earphones for calls, the volume buttons are disabled.
    I also have switching noise when I accept incoming call.
    My fw: 12070 did not solve this problem.
    Please comment.

  • How come i can't open the sim tray even if i use the small pin?

    how come i can't open the sim tray even if i use the small pin?

    Press firmly and push either the sim eject tool or a small paperclip straight in until the tray pops out.
    If that doesn't work make an appointment at an Apple store.

  • How will i be able to use my micro sim card from my iPhone 4s, in the nano sim card tray in the iphone 5?

    How will i be able to use my micro sim card from my iPhone 4s, in the nano sim card tray in the iphone 5?

    You can't. The nano SIM is 15% thinner compared to its previous two generations, so even if it is cut in the same size, the thickness would be different, meaning the cut micro SIM cannot fit into the nano SIM slot.

  • Lumia 900 Sim Tray

    Hello people
    I'm in desperate need of a Lumia 900 Sim Tray because I lost mine, anyone know where to get one in the UK? Went to all shops but none had it
    Thanks in advance!

    Must have been some shopping spree going to all shops then..
    Try Nokia Care point or eBay. ..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • I want an iPhone 3gs as I currently have a nokia lumia 620 but can I use my micro sim in the 3gs

    Hi i want an iPhone 3gs but can i use my micro sim or do i need a sim adapter? answer soon

    The iPhone 3GS takes a standard full-size SIM. It's possible that an adapter will work, but it will probably be more reliable if you get a full-size SIM from yur cell carrier.
    EDIT: I concur with Tim. The 3GS is a very old model now, as smartphones go, so I would suggest a newer model, saving up if you have to. I myself wouldn't buy anything older than an iPhone 4S at this point.
    Regards.

  • Okay so my i just got my new iphone 4 from sprint and sprint has the sim tray locked theres no hole on the side or anything and i was wondering if i took it to the apple store can i get it unlocked or another iphone with a open and close sim tray

    sprint shouldnt have locked the sim tray anyways and i think this is just wrong because i payed for the phone and should be able to do what i want with it. they say you can unlock the sim card or the tray i guess if you in good standings with the company an apperantly im not so i was wondering if somthing can be done about this because i see no hole or anything to even open the tray someone HELP ME ! please and thank you

    No. Nothing can be done about this. It was made clear quite some time ago what the situation was going to be.
    Now... That said, if you have an iPhone 4S, there is a SIM tray on the right hand side of the phone.
    If you have an iPhone 4 as you indicate, THERE IS NO SIM TRAY. The iPhone 4 is NOT a world Phone. You can only use that phone on Sprint or roam to their CDMA partners where present. The phone will not work at all throughout most of the world, including Europe.

  • Broken sim tray- nexus s

    Hןת
    2 month ago I bought in best buy LA the mobile phone - nexus s.
    when I came back to my country -Israel , I discovered that the sim tray is broken so I can't use it for calls.
    What can I do now?
     thank u very much!
    Liran

    http://www.samsung.com/us/support/service/request
    Go here.
    Crystal
    Superuser
    Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
    *Remember to mark your questions solved and click the star to give kudos to show your thanks!*
    While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
    My opinions do not in any way shape or form represent Best Buy's Official decisions.

  • My sim tray is locked, and whenever I put the sim eject tool in the hole beside it, it will not open, what should i do?

    My sim tray is locked, and whenever I put the sim eject tool in the hole beside it, it will not open, what should i do?

    Use a small thin piece of plastic (metal tools are likely to scratch the case)  and work along the seams of the tray. In all likelihood your tool is unlocking it but the tray itself is a bit gummed up, jammed.  Be patient, don't force things, and you'll probably get it open in short order.

  • Taking Out The SIM Card Wears Out The SIM Tray

    I wanted to take the SIM tray out of my (black) iPhone 3G just to check the SIM card out. It slightly wears out the area around the hole on the SIM tray to do that, it looks exactly what would happen to cheap plastic. Did anyone else remove the SIM card from their iPhone 3G? Which color is it? Does it look a little weared out after doing that? I'm a little *****d off, I just got my iPhone 3G and if I want to take out the SIM tray, I have to wear it out a little? Is the plastic really that cheap...?
    Do you guys think that there's any way that Apple will let me swap out just the SIM tray for a new tray? Everything else about my iPhone 3G is almost flawless, and I wouldn't want to swap out the whole phone for this. I think that the SIM tray is made out of cheaper plastic than the rest of the phone, which is noticable when you take the tray out. Here's my advice: DON'T TAKE THE SIM TRAY OUT! You'll probably regret it afterwards.

    My new iPhone, I could not even find where the sim holder was. I had to search the manual for info and I did not know about the sim extraction tool in the box.
    When I knew where the cover was I had to use strong light and my strong reading glasses to see it, it was really that flush.
    There was no hole for the sim tool or paper clip that I used, not realising that a sim tool was on the box cover. I had to punch through to reveal the hole and actually break out the sim holder.
    Not for the faint hearted with a brand new precious object in hand, but it had to be done and now the hole is very obvious and the aperture is very clear, even with my normal glasses.

  • Sim Tray Replacemet.. For Droid Maxx,  Droid Ultra, and Mini..

    I found a Place online that carries the Sim Tray / Volume Rocker  for the Droid Maxx,  Droid Ultra and Mini I think also uses this as Well.. I don't know how the Longevity is in these Sim Trays as they double as a Volume Rocker so having one or Two on hand would be a nice thing when & if the one in the Device goes bad..  I found this company that's carrying the replacement so if you need one I'd say give them a Call or Call Motorola and one can be sent if in stock to you Quickly with a small fee for S & H
    Here is the Company that Handles them.. there may be more that has them but I found this one Enjoy b33
    http://www.etradesupply.com/motorola-droid-ultra-xt1080-volume-button-and-sim-card-tray.html

    "LTE in Rural America"
    Verizon to give rural LTE partners access to its AWS spectrum, 'XLTE' network - FierceWireless
    Verizon Wireless Up to Seven LRA Partners - The ILEC Advisor - JSI Capital Advisors
    Verizon Wireless Exec Details LTE in Rural America Progress
    Bluegrass Cellular Launches LTE Network in partnership with Verizon Wireless

  • Sim Tray Pin

    Hi there,
    Does anyone know where I can get a Nokia branded sim tray pin for a Lumia 1020 from? It's just I have misplaced it today and can't find it anywhere. Your help would be much appreciated.
    Kind regards,
    RocknRollTim

    Did you try with Authorised Care Point ? 
    BTW, hope you have read the User Manual .. (Ref. Attachment)
    Attachments:
    SIM Door Key.JPG ‏131 KB

Maybe you are looking for

  • Balancing figure business area for line item 001 is not found

    hi In MB31 while doing Goods Receipt (Movement type:101) i am getting an error like "Balancing figure Business Area for line item001 not founr".  Document splitting is active in my system and i assigned business area for plant and division combinatio

  • How to Customise the standard T-code MM02.

    Hi Abap Gurus, We had a problem in customising the MM02 T-code. Our requirement is  Currently Goods receiver role do not have authorization to change material master.We need to provide them with some Transaction so that they will only be able to chan

  • How About Some Standard Standards For Keyword Hierarchy?

    After reading Wolf Eilers post in the "Respect Keyword Hierarchy when importing" thread, I tried his example and exported a RAW file with the "Outdoor>Landscape" example he gave and then re-imported the jpeg. It came back in with Landscape as the par

  • Output device configuration

    Hi All, I need to configure output device i have lexmark LXT44 model. when i check for LXT644 in SPAD i cannot find ,so can i use ZSAPWIN instead of LXT644. I have 4.6c  HP-UNIX. Please let me know what needs to be done from my side. Thanks &Regards

  • 10.4.11 MacBook Pro

    I have a Linksys WAP with WPA. Intermittenly this laptop won't connect with an error saying "The selected network uses an Access Control List to restrict access and your device is not on the list". Completely wrong as the access point doesn't even HA