Using an old Airport Express as a 'wireless gaming adapter' with a PC

Patience please - this is prob v obvious but I'm no tech!
I want to set up a wirelessly connected 'Slingbox' in the UK at my sisters place. I have an old (OLD!) Airport Express 'port' (looks like the current base station but is from a time when base stations looked like spoof-UFO models and the 'ports' were different - around 2003) that I want to use as the bridge between their wireless network and the Slingbox. They have a PC.
Q. Am I gonna be able to get their PC to talk to the Airport Express port thing?.. I see I can download Bonjour for Windows - is that all I need to do?..
Thanks

I have an old (OLD!) Airport Express 'port' (looks like the current base station but is from a time when base stations looked like spoof-UFO models and the 'ports' were different - around 2003) that I want to use as the bridge between their wireless network and the Slingbox.
I assume that you would like to use the AirPort Express Base Station (AX) to perform like an Ethernet bridge. This type of device would connect an Ethernet client to a wireless network. Is this what you are looking to do?
If so, then what is the make/model of the router that is currently providing the wireless network? If it is not another AirPort or Time Capsule, then you will not be able to use the AX this way.
Q. Am I gonna be able to get their PC to talk to the Airport Express port thing?.. I see I can download Bonjour for Windows - is that all I need to do?..
Bonjour is good to have, but is not required. However, you will need a copy of the AirPort Utility for Windows to be able to administer the AX from the PC.

Similar Messages

How can I use my old AirPort Express?

How can I use my old AirPort Express (the one that plugs right into the wall without a power cable) to stream music to a stereo when I am using the new Airport Express? The AirPort Utility 6.1 will not recognize the old AirPort Express.

Apple does not make it easy for you to use an older device when they want you to buy newer devices.
See this link for tips on how to install a version of AirPort Utility on Mountain Lion that will allow you to configure your older Express:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
This is not supported by Apple, so it is your decision on whether you want to move forward with this. It works fine for me, but I cannot guarantee that it will work for you, nor offer support if you have difficulty.

Can I use an old Airport Express to extend the range of a new Airport Express?

Hi all. I have an old Airport Express 802.11g (First Gen?) that is starting to fade. Still works, but not what it used to be. So I am going to buy a new Airport Express. I'm not interested in the Airport Extreme.
Question: If I use the new Airport Express as my main wireless router, can I plug my old Airport Express into another room as an extender? In other words, with the old Express and the new Express talk to each other or will a new Express only allow extension with another new Express?
Thanks!

Sorry, but the old AirPort Express 802.11 b/g does not have a setting to "Extend a wireless network", so it cannot be used as a extender with the newer AirPort Express if you plan to connect wirelessly.
If you plan to connect the older Express using a permanent wired Ethernet cable connection, then it could be configured to provide additional wireless signal coverage in that manner.

I want to re-use my old airport express base station but airport utility doesn't recognise it anymore (it dates from 2005) i would like to use it to connect to my speakers only

I have an old airport express base station from 2005
I would like to have a network on it so i can put it upstairs in a room and connect my speakers to it so i can send my music (from itunes) over the airport to my speakers.
I reset it and now i want to configure but the Airport utility doesn't recognise it anymore.
Can i update the firmware? has it become useless because too old or what can i do?
I work on macbook pro with macOSX 10.9.4
Can someone give me some tips please
thanks
J

Please locate the model number on the side of the AirPort Express. Hard to see.....gray lettering on a white background....so you may likely need a magnifying glass and good lighting to see it.
The model number starts with a "A" followed by four numbers. If you see A1084 or A1088, unfortunately AirPort Utility 6.x in Mavericks OS X (10.9.4) does not support these older models. However, you can still administer these models if you have a Mac.....or can borrow one for a few minutes....using Leopard (10.5.x) or Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

How can i use my old airport express with my new imac and wireless hp print

i just bought my first imac (intel) and a wireless hp printer. i now realize that a wireless connection between my imac and my printer needs a router.
i have an airport express base station, which is a few years old. I can't find my documentation, so i don't know its specifications.
how can i find out the specs of the airport express i have and whether i can use it now? it says that it is model a1084 100-240v~ 0.2a 50-60 hz.
does that tell any knowledgeable people out there about the specs? can i search the apple website by serial number and find the specs?
thank all of you potential responders ahead of time.

Hi green jean
Try this > http://www.apple.com/airportextreme/features/printing.html
but also see > http://docs.info.apple.com/article.html?artnum=305293
Dennis

Streaming 3d movies to my Samsung 3DTV using AirPort express and a wireless LAN adapter has not worked. What is my cheapest option for making this happen?

I need a transfer rate minimum of 9mbps. My AirPort express and 3DTV are on different floors, so I cannot directly connect with an ethernet cable. Can I buy an older AirPort express, use it as a bridge, and connect my TV to it via an ethernet cable?

Hi rockchalker,
Thanks for using Apple Support Communities.
For 802.11n Wi-Fi base stations, creating a roaming network is by far the best choice. This will provide the best throughput between the base stations and your Wi-Fi devices.
If you are unable to build the recommended Roaming network, then a Wirelessly Extended Network is the next best option.
For more information on this, take a look at this article:
Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations
http://support.apple.com/kb/HT4145
Hope this helps,
Mario

Using the Airport express as a wireless network adapter

I have a mac with no wireless network card but I have an extra Airport express. I would like to plug the mac into teh ethernet port of the AE and then use it to get onto my homes wireless network...
Is this possible? I have been trying to do this for hours and I cannot get a config that works. I can use it to setup a wirless printer just fine, why not my computer?
Please help!!

I'm having the same networking problem. Out of curiosity, though, how would you plug the mac into the ethernet port of AE? Wouldn't you have to plug the modem into the ethernet port? My Airport Express only has one ethernet port. Just curious how you would get internet to your AE without plugging the modem to it.
I went out and bought a LinkSys switch, trying to alleviate my problem of having to switch between being able to use my Mac Pro desktop (wired, due to no wireless card yet) and being able to use my laptops, PS3, etc. wirelessly by switching the ethernet cable constantly from the Mac Pro to the Airport Express. So, I bought the switch, but I can't get my network configured to where I can run everything at the same time. I'm still having to switch cables around. Any suggestions? Or do I just have to bite the bullet and have the wireless card installed?

Connecting to Airport Express via Linksys Wireless-G adapter

I am trying to use a linksys compact adapter (WUSB600N) to connect a Windows XP PC to my Airport Express- The linksys monitor CAN detect the Airport Express, but "cannot associate with the access point" for a few seconds, then "can associate... but cannot find the Internet"
I haven't had any problems connecting my MBP and a Vista notebook to my AX, just this PC using this adapter.
Can anyone help me?

To Connect your Computer to the Wireless Network you need to change some settings on your Router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbors network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...

Using old Airport Express with new Airport Extreme to stream music

I recently purchased the newest Airport Extreme to replace my older Airport Express. I'm running OS 10.8.5. I like the speed of the new WIFI signal for streaming to Apple TV. No long waits or buffering interruptions while watching movies. I still want to use the old Airport Express to stream music from my iPhone to a stereo in another part of the house. I plugged in the Express module and it just flashes amber. Doesn't show up in Airport Utility either.

I suggest that you first perform a "factory default" reset on your old AirPort Express, and then, check out the following Apple Support article for configuring it for streaming.

Time Capsule and Old Airport Express Conflict

Hello Everyone,
In my house i was using my TC in Bridge Mode from my Router without a problem. Then i needed a ethernet connection in another room than the TC located. I thought i could use my old Airport Express for Bridging and using its Ethenet Output for my new IPTV receiver.
I started to configure via Airport Utility, everything was fine. New Airport Utility even helped me to complete install process. But then my TC just start continous disconnections, 20 seconds of greenlight and then again amber flashing, then greenlight then again same as my Airport Express. When i cut the power from Airport Express everything turns out to be OK. But when i put it on the outlet, they starting to disconnect in 30 sec intervals. I even tried to connect AE to my MBPr via Ethernet, within the 30 sec of greenlights i can get internet connection but then it drops.
I assume there is a conflict between these two.
Can someone help me to figure it out ?

So far, everything that you are telling us likely points to a defective AirPort Express.
There are no known conflict issues between a Time Capsule, AirPort Extreme or AirPort Express.
Here is what I would suggest:
Power off the main router, TC and the rest of the network.....all devices
Reset the Express back to factory default settings so you start over again with new, fresh settings.
To do this, power off the Express for a few minutes
Hold in the reset button first, and keep holding it in for another 10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for it to restart to a slow, blinking amber light.
Power up your network again starting with the modem/router first. Wait a minute, then start the Time Capsule next. Keep starting devices one at a time about a minute apart until everything is powered back up.
Now try to reconfigure the Express again. Temporarily, locate the Express in the same room as the Time Capsule for the setup and test it that way.
As another test, temporarily connect a laptop to the Express using a spare Ethernet cable. Turn off the wireless on the laptop and test to make sure that you can get a good Internet connection on the laptop.
If you can.....then you know that the Express is operating correctly.
Now move the Express back to the location where it is needed and test that way.
Report on your results.

I have an old Airport Express. How do I get Airport Utility to recognise it?

I have an OLd style Airport Express that I was using with my 2007 iMac and Tiger. Recent upgrade to Mountain Lion.
How do I get the Airport Utility to recognise it so I can set extra stuff?
AndrewH66

Here are the AirPort Utility downloads:
http://support.apple.com/downloads/#airport
Bottom line: I don't believe it's possible to use your old AirPort Express with Mountain Lion. The current AirPort Utility is 6.3.1.
I'm assuming you have this one (from around 2004):
http://support.apple.com/kb/SP76
If instead you have this one (from arount 2008):
http://support.apple.com/kb/SP1
... then AirPort Utility may well support your device.

Old Airport Express Ethernet Port Usage

hi there
i have an older airport express (Model No A1264) bought some years back, it has only 1 ethernet port on it instead of 2 on the current model.
i understand the new model has 1 ethernet WAN port for modem, and the other LAN port for ethernet printer or computer.
my question is, the ethernet port on my old airport express is both WAN and LAN? or is it just a WAN port?
because i intend to get an airport extreme to hook up a optical fiber modem which will be located downstairs in my house.
and use my old airport express on the 2nd storey to hook up my etherenet printer, but not sure whether that ethernet port will work? or do i need to purchase the new model?
many thanks in advance

It no longer works.
Unplug the Express, let it rest a minute or two and plug it back it in.
Try a different Ethernet cable.
If still no luck, test the connection by temporarily connecting a laptop to the Ethernet port on the Express using an Ethernet cable that you know is working. Turn off the wirelss on lthe laptop for the "test" and see if you can get a good Internet connection that way.
If you can, you know that the Ethernet port is working, and you will need to focus your troubleshooting on the printer.
If you still cannot get a good connection during the "test", this indicates that the Ethernet port on the Express is no longer working, and the Express will likely need to be replaced.

How do I re-configure an old airport express to be used to stream music wirelessly to my receiver?

I am trying to reconfigure an old airport express to stream music to my stereo. I plugged it in and reset it using the button on the AE. Upon restart I renamed it and created a new wi-fi network. It connected to my existing wireless signal and had the green light on the AE illuminated. After turning selecting a song to play off my iPhone 5S there wasn't any option the select the network I created. Any ideas?

I plugged it in and reset it using the button on the AE.
Plugged into "what"? I take it that you mean that you plugged the AirPort Express into the Ethernet port on your router using an Ethernet cable, since that would be the only way that it could create a new network
I renamed it and created a new wi-fi network
You are telling us here that you created another different wireless network than your existing network, so you have two wireless networks now.
It connected to my existing wireless signal
The AirPort Express cannot do this if it is creating another network, as you say it is. Or, when you say "it", maybe you are referring to another device? In that case, please clarify on what "it" might be.
After turning selecting a song to play off my iPhone 5S there wasn't any option the select the network I created
You must first connect the iPhone to the new wireless network that you created, and enter the password to connect......before....you can go into iTunes and select a song to play.
Unless you really do need two wireless networks, it would make more sense to configure the AirPort Express to "join" your existing wireless network. Then, everything is on the same network. Did you consider that option?

I am trying to link our xbox and PC into our wireless network. I am using an apple airport express and it is asking me for a WEP Key. Where can I find my wep key?

I am tyrying to link our xbox and PC int oour wireless network. I am using an apple airport express and it is asking for my WEP Key. Where do I find it?

You should be able to setup WPA / WPA2 access, rather than WEP - which is old an less secure. (Unless your devices are too old for WPA??)
Try this link: http://spotlight.getnetwise.org/wireless/wifitips/apple/apple-wpa.php
**Edit
Airport does support the WEP protocol.
Apple Docs: http://docs.info.apple.com/article.html?path=Airport/5.0/en/ap2084.html

Can I use an old Airport Extreme as an extender with a new Airport Express

Hi All, I have Verizon Fios and the data line runs into my bedroom. I purchased a new Airport Express today to replace the Airport Extreme (from 2006). Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there). I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible? If so, how do I set it up?

Can I use the old Airport Extreme as an extender
Is this the "round" or "dome" shaped AirPort Extreme?
If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do.

Using an old Airport Express as a 'wireless gaming adapter' with a PC

Similar Messages

Maybe you are looking for