Using and editing another i-pod in my computer

Hi, I am trying to put videos from my computer on my friend's i-pod, but I cant, I cant even select songs that are already in the i-pod. Is it possible to do that and how??

For your friend's iPod to show and allow you to add content to it, it would have to be first configured (at your friend's computer) for Manual Updating rather than automatic updating. Then he can plug it into your computer and have it show up.
Patrick

Similar Messages

I am using more than one i pod on one computer. How do I prevent ...

I am using more than one i pod on one computer. How do I prevent them from all syncing the same music? Each I pod has needs to have it's own library. Help

Hey there,
Welcome to Apple Discussions!
There are several ways of handling multiple iPods on one computer. I would check out this Apple support document, which offers instructions and explanations on a few different methods for handling this situation. Hope it helps.
[How to use multiple iPods with one computer|http://support.apple.com/kb/HT1495]
B-rock

How can I see, use and edit contacts on PC without...

Now I finally worked out how to sync my contacts to my N95 8G (see earlier posts), I would like to use this data, plus the calendar data on a daily basis on my PC and update it where necessary, before finally synching back to the N95 at the end of the day.
Has anybody any ideas how this can be done ?
With my old Palm-based system I would use the Palm desktop but the PCSuite (v. 7.0) doesn't seem to offer this functionality.
Now the contct and calendar data must be copied there on the PC as I've performed a back-up via the Suite, but how do I get to see and edit this data (or a copy thereof) on the PC ?
If Nokia can't be bothered to work out how to do this, has anybody come across any third party vendors who have ?

01-Sep-2008 12:17 PM
larrygt wrote:
Hi - sorry for the tardy response.
When I saw that my Palm device was fading rapidly and that it was no longer supported by upgrades to new versions of Windows (a Sony Clie of 2002 vintage that I used for everything bar phone calls), I backed up my palm desktop contacts, calendar etc. to my Yahoo account with no problems.
My other posts on this forum described my frustration at not being able to simply export a file back out of Yahoo that the N95 would understand, without losing bits of the contacts (e.g. all the telephone numbers). In the end I had to go via Outlook - my other post (copied below) describes how I did it.
The approach is not perfect and I intend it to be a once only thing. I will still suffer the hassle of entering new contacts into both my N95 and my online address book as the Nokia PC Suite does not appear to accurately read csv files created by Yahoo.
My poor user experience with N95 will make me think seriously about going back to a Palm-based / Blackberry device when upgrade time comes around again.
1: Open Outlook and back up the existing contacts (that you wish to keep separate from your N95 contacts) by exporting them to the desktop in a .pst - "outlook.pst"
2: Once they are backed up to Outlook.pst, select all these contacts in Outlook and delete
3: In Yahoo, export all contacts to an Outlook format .csv file (note, Yahoo offers different .csv formats) - "Personal.csv"
4: In Outlook, import the new Personal.csv file you have created. Check contacts. Delete duplicates, and check/update errors (i.e. use Outlook like the PIM that PC Suite ought to be and isn't !).
5: In Nokia PC Suite, use the Synchronise function to synchronise the N95 with Outlook
6: Select all personal contacts in Outlook that you just imported via persoanl.csv, delete them to clean out Outlook.
7: Re-import the Outlook.pst file you originally created above to restore your original (work?) outlook contacts.
Thanks for taking the time to share "our" frustrations. As you've indicated, after enjoying the ease of managing Palm data both on the device and on the desktop, the Nokia N95 simply falls flat on its face (despite the shopkeeper's assurance it was far and above better). I have found that at least the generic PC Suite has a means to view the calendar and contacts on the desktop provided the phone is hooked up by USB. I still had to manually enter everything onto the phone to get it all as I want it, and have decided to only put the stuff I truly need to have with me at all times. I also tried to download an MP3 program but it won't accept the format (and I thought Sony had the wrap on exclusivity!?). When Nokia or another company comes up with a truly do-it-all-right format, I'll be first in line. Meantime, I will take my Palm on trips, and will tuck the MP3 player in a side pocket. This was an expensive mistake that I won't make again.

How to use and edit Outlines

Can somebody provide me some information on how to edit and create Outlines in 11g? I have a case where we are using a third party tool whose generated SQL we can't control and it is generating a query that is incredibly slow due to the optimizer's choice of an index to use. Since we can't add a hint to the query, my understanding is that I should use stored Outlines. I can see how to create one but I am unclear as to how to add a "NO_INDEX" hint / how to tell it not to use and index. Can anybody provide me help on how to do this?
Thanks,
Greg

1. SQL profile is not an alternative to stored outline. Oracle implemented SQL plan baseline as an alternative to stored outline.
2. Stored outline can be used as an way of chaning execution plan without modifying the origincal SQL text(OP seems to find the way of doing this, am I right?).
I call it "switching outline".
See following test case which demonstrate how to use stored outline to fix execution plan without chaning SQL text.
UKJA@ukja102> -- create objects
UKJA@ukja102> drop table t1 purge;
Table dropped.
Elapsed: 00:00:00.12
UKJA@ukja102>
UKJA@ukja102> create table t1(c1 int, c2 int);
Table created.
Elapsed: 00:00:00.01
UKJA@ukja102>
UKJA@ukja102> create index t1_n1 on t1(c1);
Index created.
Elapsed: 00:00:00.03
UKJA@ukja102> create index t1_n2 on t1(c2);
Index created.
Elapsed: 00:00:00.01
UKJA@ukja102>
UKJA@ukja102> insert into t1
2 select level, level
3 from dual
4 connect by level <= 1000
5 ;
1000 rows created.
Elapsed: 00:00:00.04
UKJA@ukja102>
UKJA@ukja102> exec dbms_stats.gather_table_stats(user, '&1', no_invalidate=>false);
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.42
UKJA@ukja102>
UKJA@ukja102>
UKJA@ukja102> --------------------------------------------------
UKJA@ukja102> -- case1: switching outline
UKJA@ukja102>
UKJA@ukja102> -- this is "current" plan
UKJA@ukja102> explain plan for
2 select /*+ full(t1) */
3    *
4 from t1
5 where c1 = 1 or c2 = 2
6 ;
Explained.
Elapsed: 00:00:00.04
UKJA@ukja102>
UKJA@ukja102> @plan
UKJA@ukja102> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
Plan hash value: 3617692013
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      |     2 |    14 |     3   (0)| 00:00:01 |
|* 1 | TABLE ACCESS FULL| T1   |     2 |    14 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter("C1"=1 OR "C2"=2)
13 rows selected.
Elapsed: 00:00:00.14
UKJA@ukja102>
UKJA@ukja102> -- want to change to this
UKJA@ukja102> explain plan for
2 select /*+ use_concat */
3    *
4 from t1
5 where c1 = 1 or c2 = 2
6 ;
Explained.
Elapsed: 00:00:00.01
UKJA@ukja102>
UKJA@ukja102> @plan
UKJA@ukja102> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
Plan hash value: 82564388
| Id | Operation                    | Name | Rows | Bytes | Cost (%CPU)| Time
     |
|   0 | SELECT STATEMENT             |       |     2 |    14 |     4   (0)| 00:0
0:01 |
|   1 | CONCATENATION               |       |       |       |            |
     |
|   2 |   TABLE ACCESS BY INDEX ROWID| T1    |     1 |     7 |     2   (0)| 00:0
0:01 |
|* 3 |    INDEX RANGE SCAN          | T1_N2 |     1 |       |     1   (0)| 00:0
0:01 |
|* 4 |   TABLE ACCESS BY INDEX ROWID| T1    |     1 |     7 |     2   (0)| 00:0
0:01 |
|* 5 |    INDEX RANGE SCAN          | T1_N1 |     1 |       |     1   (0)| 00:0
0:01 |
Predicate Information (identified by operation id):
   3 - access("C2"=2)
   4 - filter(LNNVL("C2"=2))
   5 - access("C1"=1)
19 rows selected.
Elapsed: 00:00:00.04
UKJA@ukja102>
UKJA@ukja102> -- create "bad" outline
UKJA@ukja102> create or replace outline test_outln1
2 on
3 select /*+ full(t1) */
4    *
5 from t1
6 where c1 = 1 or c2 = 2
7 ;
Outline created.
Elapsed: 00:00:00.18
UKJA@ukja102>
UKJA@ukja102>
UKJA@ukja102> -- create "good" outline
UKJA@ukja102> create or replace outline test_outln2
2 on
3 select /*+ use_concat */
4    *
5 from t1
6 where c1 = 1 or c2 = 2
7 ;
Outline created.
Elapsed: 00:00:00.01
UKJA@ukja102>
UKJA@ukja102> -- check outline
UKJA@ukja102> select hint
2 from user_outline_hints
3 where name = 'TEST_OUTLN2'
4 ;
HINT
INDEX(@"SEL$1_2" "T1"@"SEL$1_2" ("T1"."C1"))
INDEX(@"SEL$1_1" "T1"@"SEL$1" ("T1"."C2"))
OUTLINE(@"SEL$1")
OUTLINE_LEAF(@"SEL$1_2")
USE_CONCAT(@"SEL$1" 8)
OUTLINE_LEAF(@"SEL$1_1")
OUTLINE_LEAF(@"SEL$1")
ALL_ROWS
OPTIMIZER_FEATURES_ENABLE('10.2.0.1')
IGNORE_OPTIM_EMBEDDED_HINTS
10 rows selected.
Elapsed: 00:00:00.11
UKJA@ukja102>
UKJA@ukja102>
UKJA@ukja102> -- update outline
UKJA@ukja102> update outln.ol$
2 set hintcount = (
3    select hintcount
4    from outln.ol$
5    where ol_name = 'TEST_OUTLN2')
6 where
7    ol_name = 'TEST_OUTLN1'
8 ;
1 row updated.
Elapsed: 00:00:00.01
UKJA@ukja102>
UKJA@ukja102> delete from outln.ol$hints
2 where ol_name = 'TEST_OUTLN1'
3 ;
5 rows deleted.
Elapsed: 00:00:00.00
UKJA@ukja102>
UKJA@ukja102> update outln.ol$hints
2 set ol_name = 'TEST_OUTLN1'
3 where ol_name = 'TEST_OUTLN2'
4 ;
10 rows updated.
Elapsed: 00:00:00.03
UKJA@ukja102>
UKJA@ukja102> delete from outln.ol$nodes
2 where ol_name = 'TEST_OUTLN1'
3 ;
1 row deleted.
Elapsed: 00:00:00.01
UKJA@ukja102>
UKJA@ukja102> update outln.ol$nodes
2 set ol_name = 'TEST_OUTLN1'
3 where ol_name = 'TEST_OUTLN2'
4 ;
3 rows updated.
Elapsed: 00:00:00.01
UKJA@ukja102>
UKJA@ukja102> commit;
Commit complete.
Elapsed: 00:00:00.00
UKJA@ukja102>
UKJA@ukja102> -- see that stored outline is used in explain plan
UKJA@ukja102> alter session set use_stored_outlines = true;
Session altered.
Elapsed: 00:00:00.04
UKJA@ukja102>
UKJA@ukja102> explain plan for
2 select /*+ full(t1) */
3    *
4 from t1
5 where c1 = 1 or c2 = 2
6 ;
Explained.
Elapsed: 00:00:00.03
UKJA@ukja102>
UKJA@ukja102> @plan
UKJA@ukja102> select * from table(dbms_xplan.display)
2 /
PLAN_TABLE_OUTPUT
Plan hash value: 82564388
| Id | Operation                    | Name | Rows | Bytes | Cost (%CPU)| Time
     |
|   0 | SELECT STATEMENT             |       |     2 |    14 |     4   (0)| 00:0
0:01 |
|   1 | CONCATENATION               |       |       |       |            |
     |
|   2 |   TABLE ACCESS BY INDEX ROWID| T1    |     1 |     7 |     2   (0)| 00:0
0:01 |
|* 3 |    INDEX RANGE SCAN          | T1_N2 |     1 |       |     1   (0)| 00:0
0:01 |
|* 4 |   TABLE ACCESS BY INDEX ROWID| T1    |     1 |     7 |     2   (0)| 00:0
0:01 |
|* 5 |    INDEX RANGE SCAN          | T1_N1 |     1 |       |     1   (0)| 00:0
0:01 |
Predicate Information (identified by operation id):
   3 - access("C2"=2)
   4 - filter(LNNVL("C2"=2))
   5 - access("C1"=1)
Note
   - outline "TEST_OUTLN1" used for this statement
23 rows selected.
Elapsed: 00:00:00.06
UKJA@ukja102>
UKJA@ukja102> drop outline test_outln1;
Outline dropped.
Elapsed: 00:00:00.04
UKJA@ukja102> drop outline test_outln2;
Outline dropped.================================
Dion Cho - Oracle Performance Storyteller
http://dioncho.wordpress.com (english)
http://ukja.tistory.com (korean)
================================
Edited by: Dion_Cho on Jan 29, 2009 8:25 PM
Typo...

Does any one know how to set up ical so that my wife and i can use and edit the same ical

im trying to get ical to synce to both phonesplease help

Hi Allan, thanks for that. I've already set up a log in for my wife and that is all working fine. The problem is that when she logs in and opens iTunes and trys to associate her library with her iTunes account she gets the error message "This computer is already associated with another iTunes account". Whilst this is true, the computer is associated with my iTunes account under my separate log in, which should have nothing to do with hers. If she transfers the association to her account it will lock me out of my content on my log in for 90 days - I'm trying to work out how to associate each of the log in accounts with a separate iTunes account so we can access our music independently of one another without locking each other out. Hope that makes sense!

Can I view and edit another iCloud calendar on my iPhone?

Both me and my wife have iPhones and both have our own iCloud accounts. Can we share calendars so we both use the same one whilst still using our own individual iCloud accounts?

http://support.apple.com/kb/PH2690
Alternatively, you can add secondary accounts at settings > mail, contacts, calendars, enter your wife's account details and enable calendar sharing. This method requires trust with the account details but allows you to share other things besides calendars.

Using Senuti to get i-pod onto new computer

I have successfully downloaded Senuti and found the music from my old i-pod on the new computer but now I have no idea how to get that music actually transferred into i-tunes. I've tried to "copy" all music, I've tried the "transfer" option. I've tried to manually click and drag songs over but no luck! It looked as though some songs had started to transfer but then I started getting error messages saying that "X song" could not be transferred for almost every one of them. What is going on here?

The usual method is the file/add to library menu in the iTunes tool bar.
See this also.

What type of mac do i need for home use to watch and edit videos

What type / power of MAC do i need for home use to watch and edit vedeos as well as basic computer work?

Any of the new Macs for home - iMac or MacBook Pro are even fine. You don't need a 65lb workstation tower. If you want a tower for how well and long they hold up, and can be upgraded, that is another matter and fine and might be overkill at first.
Even the base Mac Pro will get you there.

I can not download and edit my pictures

I have downloaded my pictures from my email, they are in down loads and when I try to open my pictures in the default folder they are not there. One was there but I was unable to edit it.
My old computer just automatically downloaded into my pictures folder and then I could open it and edit it. I know this computer has a lot of cool visual stuff so I know there must be a program set up to edit pictures.

Hello heathurd:
           Welcome to HP Forum. You did not give us you're computer's model number or windows 64 bit or 32 bit. So I am at a lost to what software you might have preinstalled on your computer for editing pictures. What your email account are using helps also. I guess you are not familar with left mouse click's short cuts.
        There are several ways of saving pictures from e-mail and Internet. One fastest way is Left click your mouse on picture select Save Picture As Next window is choose window High light my pictures on right side then name picture or file then goto save picture type. PNG(*.png) Click on save. Now from E-mail account use the toolbar bar method. Hotmail or livemail is down by left mouse click method.
         To edit pictures left mouse click on picture select open with Choices are listed Microsoft Office 2010, Paint, and Windows live photo gallery. If you installed any other photo software that would be listed as well. Microsoft Office you will need to enable the photo editing tool. On the tool bar. Paint only allows writing on pictues them selve coloring and drawing.
        HP Touchsmart software has some editing software but is much harder to use.

Edit a page on an other computer

Hello everybody,
Can someone explain me, how I can watch and edit my page on an other computer?
The directory "iWeb" (user/applications/iweb) doesn't exist on my mac ...
I can publish my site under complete publish, then i get an dir with all the images and html files, but where is the whole project dir?
thanks for your help!

These articles may help:
_iWeb: Modifying your site from another computer_
iWeb: Publish to your MobileMe account from more than one computer
Managing an iWeb site from multiple Macs with Dropbox
Also see NOTE 1 here:
http://iwebfaq.org/site/iWebTwocomputers.html

Is it possible to edit (levels, curves, exposure, saturation, etc.) a selected area of a photo (using quick selection, magnetic lasso, etc.) without moving the selected section to another document and editing it there?

I'm trying to edit a portion of a photo of a lake so that the rays of sunlight (the lines that run across the sky) are more prominent, without darkening the rest of the photo. I've sucessfully selected, removed, and edited the sky in the photo (the part that I want to enhance the sun rays on), but I can't figure out how to get that piece (currently it's own document) back onto the original jpeg document. I took the selection from the Background copy if that is of any help to figuring this out.

Another way in photoshop is to make a Group above the photo. add a layer mask using the selection and put the adjustment layers in the group
There is also a forum for the full version of photoshop:
Photoshop General Discussion

How can you use one image and edit it three different ways to export later?

I am a new Lightroom 3 user. How can use the same image and edit it multiple ways to produce mulitple images to later export? For example, I have a picture of a bride and groom. I want to use that image and create a color image, a black and white image, and a close up of their hands.

Do I need to do either of those options before I start editing the image at all? For example, what if I am working on the image and doing some creative edits. Then I think of another option that I could do. Is it too late at that time or can I still get the original image to begin with?

How can I record and edit using an electronic drum kit to midi on a windows based PC (That I will eventually use in Garageband)?

Hi there
I know this isnt really a Garagband question and possibly a little off GB topic, but in the end I will be using the midi file in Garageband so it kind of is
I'm new to Midi recording so please bare with me.
I am looking to do the following.
Have my drummer record from his Session Pro DD505 electronic drum kit (which has a midi out) into his windows based computer via midi (He owns a usb to midi cable), so that he can then email me the midi file, so I can add it to a song in Garageband on my Mac. I will then choose the sound of the drum kit myself from Garageband.
He needs to be able to correct any errors he has made in the midi file before emailing it me, either by re-recording sections or by moving the incorrect drum notes to the correct beat.
I guess he would need to be able to hear the song that he is playing along to, and possibly have a click track playing at the same time.
So I guess what I am looking for is some FREE windows software to be able to record midi drum files into, that can also be used to edit the midi file after. A separate free piece of software could also be used to edit the drum midi files instead though.
I know that I can correct the midi drum files myself in Garageband, but I would rather my drummer spent the time doing this, not myself.
I've spent a bit of time googling this today but keep bringing up the wrong things as I'm probably using the wrong search terms.
So, any ideas?
thanks

You will be able to use the Cubase AI4 with any audio interface. Another option is to look for a 30 day demo of software like Reaper http://www.reaper.fm/index.php It won't stop after 30 days... just your concience needs to respond
Problem is though that if all you want to record is the MIDI then your drummer will also need some drum sounds in the form of a software instrument or a 3rd party VST to load into the recording software. So another program that comes uncrippled but has drum sounds in it is Ableton Live http://www.ableton.com/products However this can be an intimidating piece of software and it also cripples itself after 30 days.

Can I use iPhoto to view and edit images not stored in the iPhoto Library

Hi folks,
I'm a newbie to Mac after 20+ years on PC...just switched 2 weeks ago....wish I'd done it years ago. Everythings so easy and fast...e.g. setup wireless broadband in 25 mins with no probs....and I have never done anything like that.
Here's my Q.
I have a load of images, downloads and scans, of old manuscripts, authors etc. which I don't really want in my iPhoto library (which I would like to keep for actual photos. Is it possible to point iPhoto to another location (say in Documents) where it will let me view and edit these images without importing them into the library.
Alternatively can I view images as thumbnails in this other locations, and not as default file type icons.
Hope this is plain,
JP_MAC
Imac G5 17" 1.9Ghz Mac OS X (10.4.3)

Hi jp-mac,
iPhoto 5 imports all images into it's own database. (this has changed with iPhoto 6 so you might want to check out iLife 6)
The other files you want to view but not have in the library...are they image files?
If so, you can view that folder as icons and then make the icons larger so you can see what they are.
To do this open the folder in question. click the first icon on top of View in the toolbar. This will make that folder contents view as icons
Now go all the way to the top of your screen and click on View>show view options.
Slide the icon size slider all the way to the right to view them larger. Also make sure you have the "show icon preview" checked.
This will work most of the time, but sometimes if you edit images in other applications they might not make icon previews, so check their preferences to make sure you have that checked.
There is also a little third party program that will do it for you.
One is called Pic2Icon
Pic2Icon
Another one is a contextual menu item called QuickImageCM.
QuickImageCM
check out that page because there are some other useful contextual menu items that I use all the time.

Using an external hard drive to store and edit videos?

Hi
I have read many articles that suggest placing all video projects/events in an external hard drive to save space on my Mac Book or Mac Air.
I just ordered this: http://www.amazon.com/Western-Digital-Passport-Ultra-Portable/dp/B00E055H5O/ref= sr_1_1?s=pc&ie=UTF8&qid=1429627818&sr=1-…
So, how should I format/set up the external?
If I save projects/events on the external, can I come back and edit projects/events that only live in the external drive?
I also want to be able to take the external to whomever's computer to import videos shot by other cameras stored in other peoples computers. Is this ok?
I would be using either iMovie or Final Cut Pro.
Thank you.
Sebastian

To add to Karsten's post - Libraries on an external drive behave just the same as those on the boot drive. (Like many people, I have all of mine on an external drive).
If you connect the external drive to another computer to use with iMovie or FCPX make sure that the other computer is using exactly the same version of iMovie or FCPX. This because some updates to both programs (even minor 'third-digit' updates) have required events from earlier versions to be updated. This cannot be reversed and updated events will no longer work with earlier versions.
Geoff.

Using and editing another i-pod in my computer

Similar Messages

Maybe you are looking for