Using and viewing camera phone overseas
stupid questions:
can I use my camera phone overseas without charge?
How about using local wi-fi for search and email?
chinch wrote:
kampkayaker wrote:
stupid questions:
can I use my camera phone overseas without charge?
How about using local wi-fi for search and email?
Yes, just turn DATA OFF (or put it in airplane mode to turn Data/Voice off) to avoid data charges. Then turn wifi on when available.
You can definitely take as many pictures with your Trophy as you'd like at no cost to you. It would be best to turn the data off so you won't have roaming charges. I would also like to just add this link that gives you the International Data Roaming Rates
Have fun on your trip!
Similar Messages
-
If I buy an iPhone5 in Canada and add Applecare in the US, can I use and get my phone serviced in the US?
Thanks for the response. Called the Perimeter Mall store yesterday morning with fingers crossed frist thing in the morning. They had one. Zipped up there and now I have it: White 32gig i5 rocing a TMobile SIM and an Seidio Active case.
-
My iphone4 is very very hot when charged and used and the camera cant be opened.
my iphone4 is very very hot when charged and used and the camera cant be opened.
Not normal. Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
View cameras on Android phone using IP Cam Viewer
I use IP Cam Viewer to view my Internet cameras on my Android mobile phone. I have a Droid phone and WVC80N cameras, and this app works great. (I select "Linksys WVC Series" in the setup.) It supports a lot of other types of Internet cameras too. You can get it on the Android Market. The developer actively updates the app and seems very responsive to questions and requests. You can find more information on the app on his forum at http://hit-mob.com/forums/viewtopic.php?f=7&t=18
This application also has a Widget for your desktop on the android. You can setup the widget to feed a certain type of camera, etc. In a recent update, the Cisco/Linksys PVC300 camera was added under the LINKSYS category, and it works great. This is a nice PTZ camera from Cisco SMB. I have a total of 8 cameras in my IPCam Viewer application, it's really one of the BEST camera apps I've used and the PT control using your finger to swipe in the direction you wish to view is great!
So far I have it working on these following cameras:
PVC300
WVC54GCA
WVC80N
WVC210
PVC2300
In most cases, try the WVC series when adding a Linksys camera, and adding select the PVC300 if you have that specific camera. Let's hope he adds support for the newer Cisco cams VC220 etc...
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming -
i downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.
The face detection used in the camera jut isnt for me.
Try a different camera app. Camera Plus is a good one and there are many others. -
hello..i have purchaes iphone 5 from u.s it's a factory unlocked iphone 5 ..on may14th..it has warranty till may14th of 2014..and i came idia on july and after using the phone for 1moh in india ,when i'm trying to restore it doesn't shows apple iphone menu..it displays the screen image of connect usb cable to restore itunes .and i tried times and it shows the error (-1)..when i have contacted apple the said bring the phone to us we will replace it with new one....now i can't go to u.s so please kindly help me..as soon as possible...please
EDIT 2: It cannot be restored via iTunes 'cause I get a screen message saying that there's no SIM card in the iPhone I'm attempting to activate. The friend who sold me the phone showed me a method for restoring it on the phone itself, without having to send the command through iTunes (connect the phone to computer, turn it off, hold both Home and Power buttons until the Apple logo disappears, release the Power button without releasing Home button, iTunes shows a message about an iPhone in restoring mode, restore, etc.). Thing is, I tried this two or three times on the iPhone 5 but the device still doesn't recognize the stupid SIM…
Please, help -
I have unlock my iphone to travel and I came home to use the back up and now my phone won't accept the back up
How & who unlocked your iPhone?
-
i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.
I am seeing if I can get another battery even though I do not believe that is the issue. It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery? It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage). When just sitting idle it doesn't seem to turn off until that 55-60% mark. It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
Any other suggestions would be helpful... and I will get back to you if a new battery helps. Thanks! -
I have an Ipad 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds) The Ipad will eventually connect to the network, but by this time the driver is frustrated. I have moved the antenna to within 20' of where the vehicle comes to a stop. My Iphone does not have a problem connecting or reconnecting when used side by side with the Ipad. Both the Ipad and Iphone have Otter box covers. Has anyone run into this problem or have any suggestions?
30 seconds to reconnect to a WiFi network is not unusual, especially in an environment where other radio signals on similar frequencies are present. Sorry about that.
You might get better times by letting the WiFi base station pick another channel. But you might not. -
Can I use my mac book pros camera,and view it on my iPad?
can I use the camera on my mac book pro and view it on my ipad? if so how?
Try this:
http://www.screenrecycler.com/ScreenRecycler.html -
I just recently synchronized my contacts using outlook express, and I want to be able to view the phone contacts on the computer, how could I do that? I can't restore the phone then back it up on my computer because I'm on using windows XP and I cannot update my iTunes and thus I can't synchronize my phone back so I lost all my important work contacts and I'm just wondering if I can somehow access it on the computer
You would open Outlook Express on your PC...
-
I receive a 4s after been use for 2 years in the verizon network and the customer upgrade to a 5. I will like to use the phone overseas but I do not use Verizon, how I can get this phone legally unlocked without having to add service because I'm with Sprint under a contract?
I can get the prior owner of the phone info if you nedd to contac her to verify, just let me know thank you.
If the phone was used in the Verizon network for 2 years, is that not enough time to get the phone unlocked?I have sprint phone and service without simcard, Sprint and Verizon use CDMA. But if I can get the Verizon iPhone 4S unlocked, I can use it let's said in the caribean, canada, europe etc., with a local simcard from the service provider and country that I visit . No to be use here in USA with Sprint or Verizon, only to be use with GSM-Simcard when I travel out of USA.
-
I'm using iPhone 4S and it was working fast once I purchased and after few months I update my phone since to 7.0.1 since then neither my wifi is working nor my Bluetooth and even my phone is working slow, after than many new updates came I did but nothing works. Kindly help me out how to solve this problem.
Hi Sameer alamgir!
Here are two articles that can help you troubleshoot these issues with your Wi-Fi and Bluetooth connections:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
I brought apple lightining cable from authorised shop , but my i phone is not getting charged with that how can i know its orginal or not there is no printing on that cable and the wire is little harder than which i was using before it came along with phone.., Please let me know is the cable is orginel or not ..
the phone says it is not charging even though it actually is. Check and see if that's the case. A very underhanded trick by Apple so they can charge 10 times what the cable is worth. They do not win admirers by that proprietary trickery.
-
Why will his phone not give him the option of using his front camera?
Also, the iPhone is not a Storage device... has he been Backing Up Regularly...
How to BackUp > http://support.apple.com/kb/ht1766
Maybe you are looking for
-
I want to create a custom enterprise project field and would like to use instead of for example a text attribute or a look-up table a field for employees (e.g. project manager) which are coming e.g. from the Active Directory. But when creating this c
-
Error while uploading the logo using se78
Hi All, I am using se78 tansaction to upload the company logo.i save the file as .bmp on desktop.while importing the file its giving me an error that file format is not valid.Please tell me which format should i use to upload the logo. Regards lalit
-
Error while writing to a file from pl/sql
Hi, I am trying to execute the following script but i get the following error ; declare emp_rec emp%ROWTYPE; file_id UTL_FILE.FILE_TYPE; BEGIN file_id := utl_file.FOPEN ('C:\test','test.txt','w'); FOR emp IN (SELECT employee_id FROM employees) LOOP u
-
URGENT - Running Webstart manually (with java.exe)
Hi, A couple of months ago, someone from SUN gave me a (very long) command line to start java web start using java -cp etc... At that time, I needed to be able to CTRL-C javaws to get a stack trace location of where JWS was stuck. Well I need that co
-
Best Way to Create Generic PL/SQL XML Parser
I have an application that stores xml documents in a table. For each product sold in the system, a different XML document can exist for custom data about that product. The schemas are stored in another table and not with the xml document. I am lookin