Using AnyConnect as wireless supplicant

Hello All,
I used to utilize CSSC as a wireless supplicant on my machine when I had windows XP.
I tried yesterday to install it on windows 7 (I tried vista version) but it does not seem to work with windows 7.
I was searching and I found somewherein this forum that CSSC is being deprecated and the anyConnect is bieng used to connect to the wireless networks as supplicants.
I was able to install the NAM (Network Access Manager) from which I can configure the wireless network profiel and generate a xml file.
The question is: where should I use this xml file? what is the exact program that should I use to import this file?
When I try to install AnyConnect Secure Mobility client to my machine it jus tappears on the taskbar saying that web-security service is not running (I tried to install web-security but it asks for a license by then).
can anyone tell me how can I use the anyConnect as a supplicant for the wireless?
I tried to search for some docs but none helped.
Many thanks.
Amjad

Hussam,
Why would you not suggest the benefits of Anyconnect NAM, it is CSSC's successor.
Back to the original thread, here are the install directions when installing NAM, you can just install the msi you have to install the secure mobility client package first.
http://www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/administration/guide/ac02asaconfig.html#wp1601325
So basically you have to install the core module which is the vpn client, then you can install the optional modules, whicn for you will be the NAM.
Thanks,
Tarik Admani
Please rate helpful posts

Similar Messages

AnyConnect INT gets disabled by wireless supplicant

Our Wireless Software disables wireless connections upon wired connect. For some reason the AnyConnect virtual adapter gets identified as a wired adapter. When the vpn connection is enabled, our wireless supplicant disables itself, which (if the user is using wireless) disconnects the session.

This is a known issue with the Juniper Odyssey client. In order to resolve the issue you just need to add the Cisco AnyConnect adapter to a OAC Blacklist.
Steps are described in the below article
http://kb.juniper.net/index?page=content&id=KB10522&actp=search&searchid=1246909105418
Here is a synopsis on what to do:
1. In Network Connections, copy the name of the adapter as it appears in its connection properties. In the event of virtual adapters, copy the name of the adapter as it appears in Odyssey.
2. Open your registry and go to...
HKEY_LOCAL_MACHINE\SOFTWARE\Funk Software, Inc.\odyssey\client\configuration\options\adapterTypes\virtual
3. Under "virtual" create a new string value. As there may be other entries you will have to name the value appropriately. As shown in the screen shot below there were 5 previous entries, so a 6th entry was created called v6. For the value data just paste in the name of the adapter you copied from Network properties.
Note: Any registry settings you put into a machine will be ported over when you create a custom MSI.
Once you have made the change and make sure the setting works for you. You can create a custom MSI on that machine and install the custom MSI on all machines that would be using the virtual adapter.

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I am using chat-r wireless and facetime is not working but when i put rogers fido or any other carrier sim in it work. Anyone know what the problem?

I'm guessing it's a compatibility problem similar to that that T-Mobile in the US has. I'm not familiar with chat-r wireless, but I'm guessing it's not a supported carrier for the iPhone. If they can't tell you how to fix it, I'm guessing it's just plain not going to work.

I have an IMAC that runs OS 10.6.7. I use Netgear for wireless. My computer keeps losing the network, so I can't use wireless.

I have an IMAC that runs OX 10.6.7. I use NEtgear for wireless. I have a laptop and Ipod that I use on the wireless. Recently, my desktop computer shows that it is searching for the wireless system (on the router). I contacted Netgear. They talked me into buying another router and their technical contract. Nothing is working. I can plug my 5200 modem directly up to my desktop , and the network is fine, but the wireless, of course, is not plugged in. When I go to connect the wireless, it doesn't work. This is not a computer program per se, nor is it a router program because sometimes it will work. It seems to me that the computer and router are not working together to hold the settings.
I have attempted to download the latest software for my computer, i.e., Imac graphics fireware. Each time I try, it says that the extensions are not valid for my computer.
Any suggestions?
Thanks, Vicki

Imac graphics fireware.
Did you mean to say firmware? You should only install firmware updates when offered to you via Software Update; other than that, whatever is offered is not appropriate for your model.
As for your Netgear router - I have a Netgear and set it up manually on their web interface setup site (the address should be in your manual). Did you call your ISP so they will recognize that there is a router involved? Sometimes my iMac also does not want to communicate with the router; however, my Macbook and printer have no problem. I solved the problem by connecting things this way:
cable from wall to modem > cable from modem to router > cable from router to iMac. The other things are wireless.

Why can't I use two 8500 wireless printers on one router? The 8500 A910 looses it's connection.

Why can't I use two 8500 wireless printers on one router? The 8500 A910 looses it's connection after awhile.

What router? What operating system? Are they both A910s?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Is it possible to use the Apple wireless keyboard with the iPhone 6? Will the Magic Mouse work with iMovie on iPhone6 Plus?

iPhone 6 page says that iMovie is a (free) application available for iPhone 6. When I use it on the desktop I need a mouse. Should I expect all controls to be touch-sensitive, or is it possible to use the wireless Magic Mouse? Similarly, if I want to type an email or a long document, is it possible to use the Mac wireless keyboard to enter text? With the iPhone 6 Plus taking over for laptops (phablet), it seems to me that input tools are relevant. Maybe what I'm asking is whether the iPhone6 (OS8) has drivers for these devices. Please advise.

Apps that are designed for iOS devices such as the iOS version of iMovie are intended to be used entirely by touch. It's worth noting that iMovie for iOS is not absolutely identical to iMovie for Mac OS.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

Using AX as wireless router, how to set up w/ security and airtunes on XP

I previously had a Linksys wireless router. I just purchased an Airport express to use as the wireless router (and remove the Linksys router) as well as use the Airtunes functionality.
After some trial and error, I have been able to wireless connect my computer to the AX on it's own (the linksys router is now unplugged and out of the equation). I can connect to the internet fine on my PC (XP Pro SP2).
Trouble is, when I use the Network Setup Assistant, it shows the apple network listed, but it can't connect to it, no matter how many times I try, reboot my machine or reboot the AX. I've tried both the "setting up a new network" and "editing an existing network" option, and in each selection, after a few minutes of trying to connect to the network, I just get a failure message.
If I try and use the Admin utility, nothing shows up in the left-hand list window, and when I Press re-scan, still nothing shows (it doesn't even appear to scan).
I'm not sure what I'm doing wrong. I can't find simple instructions on how to set up the AX as the only wireless router for a PC and set up security and Airtunes (I'm assuming enabling airtunes is done in these applications, as I haven't seen anything about that yet either).
Any ideas on how this is done with a PC? Much thanks!
Dell 4500 series

I have found the 'DHCP Reservations' option on the AirPort Extreme to be buggy. I seem to remember it causing IP conflicts for some reason. I think what I remember is that if the computer with the reservation was off, and the DHCP server then handed out that IP to another DHCP client, then there would be a conflict when the reserved IP computer was turned back on. Maybe it was an issue in ealier versions of the AE or OS X as the case may be, and maybe it's been corrected, but I've never bothered using it agian since the method I describe below has always worked without fail. Also, I'm guessing DHCP Reservations would work fine if one manually enters IPs outside of the DHCP range but in the AE 'DHCP Reservation Setup Assistant' the IP options provided are within the DHCP range which to me makes no sense and increases the potential for IP conflicts.
Here's what I do to setup a mixed environment of static and dynamic IPs on my network. It works like a charm and does not require the DHCP server (beyond the distribution of dynamic IPs to hosts using DHCP).
For machines on my network that are accepting services from the public network, I set them up with static IPs using the 'Manually' option (System Preferences/Network/Ethernet/Configure IPv4). The settings for 'Router' IP address and 'DNS Server' IP address should both be set with your gateway/router LAN IP). Use an IP address below or above the DHCP range of adresses (in AE/Internet/DHCP/DHCP Beginning & Ending Address).
i.e. if my subnet is 10.0.1.1 and my DHCP range is 10.0.1.100 to 10.0.1.150, you could set the static IPs on your local hosts as 10.0.1.x where x = any number from 2 - 99 or from 151 - 200 as an example.
All other machines and devices that do not require static routing are setup as DHCP clients and get a dynamic IP from the AE. To me it's a simpler setup though it might take a little extra time to setup initially.
John

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

I have a MacBook Pro and can't print pdf files or word documents using my HP Wireless Photosmart Printer. It will print files from the internet. Any suggestions or ideas will be greatly appreciated. Thank you.

Hello, SoonerAnesthetist.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
OS X Mavericks: Solve printing problems
http://support.apple.com/kb/PH14142
Cheers,
Jason H.

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this

I have a Mac Pro 4,1 quad core intel Xeon running mac OSX 10.6.8 and I have just moved studios and now need to use the Internet wirelessly but there's no airport facilities on this model can anyone tell me what model of airport card I would need for this mac

Instead of getting a wireless card for the Mac Pro, you might want to consider getting an 802.11ac wireless bridge device that would enable you to connect more than one device to it by Ethernet cable and to eventually take advantage of the faster 802.11ac wireless standard.

How do I use a usb wireless on a mac pro desktop

How do I use a usb wireless adapter on a mac pro desktop. I installed the driver, and the screen for realtek wireless adapter recognizes the network, but it does not appear in system preferences

Try a restart.
If no joy, read the manual, here:
http://eshop.macsales.com/tech_center/manuals/MAXPower/NT-WiFi-USBn_2012.pdf

Using keypad on wireless keyboard to enter passwords won't work in safari

I have an iMac and I am using an apple wireless keyboard. Whenever I try and type in a password that has numbers in it and I use the keypad, the password is not recognized. I do not have the mouse function turned on. The keypad works fine in all other programs even in other fields in Safari. Just doesn't work for password entry. It will work in Firefox however.
Any thoughts?

Quit Safari. Disable bookmark synchronization, if applicable.
Hold down the option key and select Go ▹ Go to Folder… from the Finder menu bar. Copy the following line into the text box that opens, then press return:
~/LibrarySafari/Bookmarks.plist
Move the selected file to the Desktop, leaving the Finder window open. Relaunch Safari. Select File ▹ Import Bookmarks from the Safari menu bar. Import from the bookmarks file you moved to the Desktop. Test. If Safari now performs normally, you can delete the old bookmarks file. Otherwise, quit Safari again and put back the file you moved, replacing the newer one with the same name. Close the Finder window and post again.

Using Apple's Wireless Keyboard on Intel iMac

I would like to use an Apple Wireless Keyboard on my intel iMac (the one that comes in white and has an extended keyboard). Can I do this?
I tried to set it up but the intel imac doesn't recognize it, plus the G5 (which is in close proximity) keeps recognizing it instead.
Any thoughts?

Hello Nathan:
Delete it from the G5. Turn the G5 off. Then try to pair it with the new computer.
Barry

Anybody using an Apple wireless mouse on the Mac Mini ?

Just bought the bluetooth wireless mouse and keyboard for my new Mac mini core due. The performance of the wireless mouse is disappointing. I believe the timing gap between the hand movement with the cursor movement on the screen is far too long so it is difficult to control the mouse smoothly. I have been using radio type wireless mouse on other PCs and the Apple wireless mouse is the worst mouse I have ever used. Don't know whether anybody here has smiliar experience. Any recommendation to retify or improve this?? I'm happy with the new Mac mini though, and the wirelss keyboard is only okay ( it loses connection with the Mac occassionally even in short distance).
Mac Mini Core Duo Mac OS X (10.4.5) Window XP PC
Mac Mini Core Duo Mac OS X (10.4.5) Window XP PC

I had a same trouble in my Core Duo 1.66. I posted the same message in Apple Japan Discussions. There is no reply. Then, I checked U.S. Discussions and find your message.
First, I think a low battery issue in Apple wireless mous, but not. The mous was working for Mini G4. I asked replacement the Mini, then I got another new one. It had the same trouble.
I found It depends on a distance between Mini and the mous.
<30cm, it worked perfect.
<div class="jive-quote">30, <50cm, it did not work anytime, cursor movement was not smooth.
1m, it did not work smooth, every time cursor was skipping on the monitor.</div>
I tried it on two new Minis. Mini G4, it works perfectly even it is >5m.
I believe that it is bletooth issue.
Could you check the distance dependance between Mini and the mous.
Finally, I returned the Core Duo 1.66 and refund. If This issue is solved, New Mini performance will be good enough for me.

HT4245 i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

i use a macbook pro which came with facetime i have an iphone 4S as well. whenever i use the wireless on my iphone i can facetime with ease however when i use the same wireless for my mac to facetime the call always gets disconnected.

To use factime on your Mac, I believe you will need to use your email address to do so instead of your wireless number. Since you can't make calls on the Mac.

Using AnyConnect as wireless supplicant

Similar Messages

Maybe you are looking for