Using APEx with SQL Server

Application Express 3.1.1.00.09
I am testing APEX.
We also have SQL Server.
I can see creating a DBLINK and using HS to access SQL Server like Oracle.
Are there any other ways

Hi willjamu,
I tried this but did not work for me.
If you are able to do it let us know.
Kind Regards
Rana

Similar Messages

Can I use Java with SQL Server CE edition?

Hi,
Can anybody tell me whether I can use Java to program the database operations for SQL Server CE?

Hi:
I have the same question. I don't know java how to connect the Microsoft SQL Server CE. Do you know the answer now? Please let me know. Thank you very much.
chia-li
[email protected]

Toplink with sql server

I have sucessfully used Toplink with Oracle. ow I have to use it with MS SQL server and I am having problems. First of all, in the Mapping Worbench, the only SQL server driver listed is weblogic.jdbc.mssqlserver4.Driver. Why can't I use the regular ms sql driver, com.microsoft.jdbc.sqlserver.SQLServerDriver? Why should the mapping workbench be tied to Weblogic? If one did not have Weblogic, would it be impossible to use Toplink with SQL server? Well, I have Weblogic, so I tried using the weblogic driver with the url jdbc:microsoft:sqlserver://<host ip>:1433;DatabaseName=<db name>. When I try to connect, a dialog box appears that says: "java.sql.SQLException $$$$$$$$$$ License Exception $$$$$$$$$$ Missing license for: WebLogic Server 6.1. $$$$$$$$$$ License Exception $$$$$$$$$$ Username or password could be invalid." I have weblogic.jar in the classpath. I tried adding the line SET WLS61_HOME=M:\bea610\wlserver6.1 to workbench.cmd. It didn't help. Any suggestions?

I already tried this. It does not work. I put the following jars in the classpath in workbench.cmd: msbase.jar;mssqlserver.jar;msutil.jar. Then I start workbench. When I try to enter com.microsoft.jdbc.sqlserver.SQLServerDriver as the driver, I get an exception. Here is the stacktrace:
Exception occurred during event dispatching:
java.lang.ClassCastException: com.webgain.openapi.foundation.uitools.WGDefaultListModel
     at com.webgain.workbench.ui.db.BldrLoginInfoPanel.actionPerformed(Unknown Source)
     at com.webgain.openapi.foundation.uitools.WGListChooser.fireActionEvent(WGListChooser.java:664)
     at com.webgain.openapi.foundation.uitools.WGListChooser$ListDataHandler.contentsChanged(WGListChooser.java:473)
     at javax.swing.AbstractListModel.fireContentsChanged(Unknown Source)
     at com.webgain.openapi.foundation.uitools.WGDefaultListModel.setSelectedItem(WGDefaultListModel.java:740)
     at com.webgain.openapi.foundation.uitools.WGListChooser.setSelectedItem(WGListChooser.java:1446)
     at com.webgain.openapi.foundation.plaf.basic.WGBasicListChooserUI$ListChooserModel.setSelectedItem(WGBasicListChooserUI.java:527)
     at javax.swing.JComboBox.actionPerformed(Unknown Source)
     at javax.swing.plaf.basic.BasicComboBoxUI$EditorFocusListener.focusLost(Unknown Source)
     at java.awt.AWTEventMulticaster.focusLost(Unknown Source)
     at java.awt.AWTEventMulticaster.focusLost(Unknown Source)
     at java.awt.Component.processFocusEvent(Unknown Source)
     at javax.swing.JComponent.processFocusEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.setFocusRequest(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Container.proxyRequestFocus(Unknown Source)
     at java.awt.Component.requestFocus(Unknown Source)
     at javax.swing.JComponent.grabFocus(Unknown Source)
     at javax.swing.JComponent.requestFocus(Unknown Source)
     at javax.swing.text.DefaultCaret.mousePressed(Unknown Source)
     at java.awt.AWTEventMulticaster.mousePressed(Unknown Source)
     at java.awt.AWTEventMulticaster.mousePressed(Unknown Source)
     at java.awt.AWTEventMulticaster.mousePressed(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at com.webgain.openapi.foundation.uitools.WGPasswordField.processMouseEvent(WGPasswordField.java:99)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
If I ignore the exception and try to connect to the database anyway, it tries to use the weblogic driver.
Next I manually edited the database xml file and put in the driver name automatically. When I bought up the mapping workbench again, it again threw an exception. However, the correct driver name was in the file, so it did finally let me connect to the database. So it seems there IS a bug, although it has to do with the GUI and not SQL server per se.

IS ODI 10.1.3 compatible with SQL SERVER 2008?

Hi All,
Doews 10.1.3 work with sqlserver 2008? I have a sqljdbc4 driver listed in my driver folder, but I can't seem to get a connection when I am testing the connection.
Thanks

Don't forget that ODI 10g has a bug in predefined connection string for SQL Server, and you'll need to check\correct it. We use ODI with SQL Server 2008, and everything is ok.

TopLink with SQL Server 2005

Could someone help answer this question:
Has TopLink 10.1.3.x been certified to support SQL Server 2005?
I appreciate your information.
Haiwei

It is certified on SQL Server 2000.
I know some customers are using it with SQL Server 2005, though.

Can I use Same ADF application with SQL server 2008 as well as Oracle 11g?

Hi ,
I have created a application in ADF(Using J-Developer). I used SQL server 2008 as Database Provider. I have same Database in Oracle 11g. I want to connect my appliction to Oracle 11g database. I changed connection and connected to Oracle. But, when I tried to save or delete any data from front end, it gave error. Any solution on this?
Thanks

Hi,
I have created Entity object and View object for every page in my application. That objects created from sql server database. Application is working fine with sql server. But when connected with Oracle 11g. It is giving following errors:
On clicking search control it gives: ORA 00923 From keyword not found where expected.
On searching with perticular field it gives: ORA-01722: Invalid Number.
On Clicking save buttonit gives: ORA-00933: SQL command not properly ended.
These are error messages from IntegratedWebLogicServer-Log:
java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
<QueryCollection> <buildResultSet> [3929] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
Caused by: java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
<DCBindingContainer> <cacheException> [3947] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
<DCBindingContainer> <cacheException> [3948] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
<DCBindingContainer> <cacheException> [3949] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
<DCBindingContainer> <cacheException> [3950] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
<DCBindingContainer> <cacheException> [3951] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
<DCBindingContainer> <cacheException> [3952] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
<DCBindingContainer> <cacheException> [3953] * * * BindingContainer caching EXCEPTION:oracle.jbo.SQLStmtException
<DCBindingContainer> <cacheException> [3954] java.sql.SQLSyntaxErrorException: ORA-00923: FROM keyword not found where expected
java.lang.NullPointerException

Using BizTalk Enterprise Edition 2009/2013 with SQL Server Standard Edition vs Enterprise Edition

Hi All,
I would like to know what are the Drawbacks of using BizTalk Server Enterprise Edition 2009/2013 with SQL Server Standard Edition vs Enterprise Edition.
We are currently using Enterprise Edition.
1) Are there any adverse performance constraints? Microsoft mentions to use SQL Server Enterprise Edition for "Optimal Performance" but does not expand on the topic.
2) Any features missing?
2) Is there a supported way to downgrade SQL Enterprise to Standard for an exisiting BTS Environment?
Thanks!

1) SQL Standard is limited to 4 CPU's and 64GB of memory while Enterprise is 8 CPU and 2TB or memory.
2) The only BizTalk feature dependency on a SQL Enterprise feature is BAM Real-Time Aggrigations which requires Analysis Services RTA.
3) Yes, but it's not a SQL downgrade really, you would move the BizTalk databases:
http://msdn.microsoft.com/en-us/library/aa559835.aspx

How to use lexical parameters with Sql Server Stored Procedure?

Hi,
I'm developing a BI Publisher report on a sql server database. I need to execute a stored procedure to dynamically build the query by replacing the lexical parameters with the values of varaibles of the stored procedure. With Oracle stored procedures, I have used data template and had reference the varaiable in SP by prefixing it with '&'.
It doesn't work if I try to do the same thing with SQL server. Is there anyone who has come across the similar situation? Please let me know if anyone has got any ideas...
Thanks in Advance
Rag

TopLink currently doesn't support multiple ResultSets. Multiple ResultSets support is considered for a future release.

Using Before report Trigger with Sql Server

i have used packages in oracle using before report triggers in bi publisher 11g is it possible to do in the same way with sql server ?? don't know much about sql server . any link or documents

Hi T.holt,
Personally, I don’t believe SQL 2008 R2 with ADMT 3.2 is supported. From the guidelines of install the Active Directory Migration Tool (ADMT), ADMT v3.2 requires a preconfigured instance of SQL Server for its underlying data store. We
should use SQL Server Express and install ADMT v3.2 on a member server. ADMT installation enforces the following service pack requirements:
• SQL Server 2005 Express must be installed with Service Pack 3 (SP3) or later.
• SQL Server 2008 Express must be installed with Service Pack 1 (SP1) or later.
If you use full versions of SQL Server 2005 or SQL Server 2008. In this case, you need to install and run the ADMT console on a remote computer, and you can run multiple ADMT consoles on different remote computers. If
you use a full version of SQL Server, ADMT installation does not enforce any service pack requirements.
For more information about installing ADMT in the target domain, you can review the following article.http://technet.microsoft.com/en-us/library/cc974370(v=ws.10).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Use of PVKConverter with SQL Server 2012 SP2

I am trying to convert a certificate that was exported from our database server to be used by SQL Server for database encryption. When I run the PVKConverter, not Private Key File (PVK) is generated.
The certificate has Server and Client Authentication as the purposes of the certificate.
What purpose or purposes does the certificate need in order to be able to be used by SQL Server 2012 SP2?
Why doesn't the PVKConverter generate a private key file?
I can use the command makecerts to generate a self signed certificate and have it work with SQL Server database encryption.
Thanks.
DJ

Hi DJ,
Based on my research, SQL Server supports the importing of existing security certificates, specified as a pair of files that are encoded in PVK/DER format. Below Transact-SQL script displays the basic key file format for SQL Server database encryption.
CREATE CERTIFICATE <Certificate name>
FROM FILE = '<PVK/DER format file>.cer'
WITH PRIVATE KEY (FILE = '<PVK/DER format file>.pvk',
DECRYPTION BY PASSWORD = '<Encryption password>');
According to your description, PVKConverter doesn’t generate a private key file. PVKConverter is used to generate PVK/DER encoded security certificates from existing PFX encoded security certificates. Thus, please ensure that your certificate is encoded in
PFX format and make sure you perform all the steps properly as described in the
KB article.
There is also a related blog for your reference.
http://blogs.msdn.com/b/sql_pfe_blog/archive/2014/02/04/generating-a-trusted-tde-certificate-in-the-proper-format-from-a-certificate-authority.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Connect Oracle Forms 6i with Sql server

Plz tell how to connect oracle Developer 6i with Microsoft Sql Server 2005.
thanks

Ghulam Yassen wrote:
Plz tell how to connect oracle Developer 6i with Microsoft Sql Server 2005.
thanksOracle Forms is best used against an Oracle database... so why on Earth would you want to use it against SQL Server?
Aside from that, Oracle Forms is old technology... you'd be better using Oracle Application Express (Apex) for producing web based apps.
If you must do things against an SQL Server database, you would need to set up heterogenous services connectivity (HS) and treat the SQL Server database as an external database.
http://docs.oracle.com/cd/E11882_01/server.112/e25494/ds_concepts001.htm#ADMIN12079

Sharepoint Foundation 2010 compatibility with SQL Server 2014

Due to a requirement to use Sharepoint without Active Directory access. I am trying to find explicit confirmation whether Sharepoint Foundation 2010 is compatible with SQL Server 2014. I have seen that Sharepoint Server 2010 and 2013 are compatible
with SQL Server 2014 as of CU 1 (released in April). But there is no mention of Sharepoint Foundation.
This chart is great except it doesn't mention whether the Foundation versions are supported.
http://msdn.microsoft.com/en-us/library/gg492257.aspx
Thanks.

Note that that is for the Reporting Services component, but not necessarily for the SQL Database Engine component (which comes from the SharePoint Product Group, rather than the SQL Product Group). I haven't seen any confirmation that SharePoint 2010 is
supported at all with SQL 2014 as a Database Engine.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

DI Server with SQL Server 2008

Hello.
In the company where I work we develop an application that uses B1WS.
In the development environment had the following characteristics:
SAP Business One 2007 SP01, PL 09
SQL Server 2005 Developer Edition
Windows XP Professional SP 3
SAP Business One Web Services 1.0
At the time we applied to the deploying the SAP Business One version 8.8, but I had a serious problem. The test environment has the following characteristics:
SQL Server 2008 Enterprise Edition
SAP Busines One 8.8 * PL 10
Windows Server 2008
The problem is that when trying to connect to the DI Server generates the following messages:
The TAO NT Naming Service has stopped. (WithOut DBUser and DBPassword)
Unable to access SBO-Common database Login (With DBUser and DBPassword)
I tested the connection directly to the DI Server disponbile by example in the SDK and it generates the same error. For the SAP interface is connected correctly.
DI Server allows connect with SQL Server 2008?
Messagge:
<DatabaseServer>mv-05910a0046</DatabaseServer>
<DatabaseName>Prueba</DatabaseName>
<DatabaseType>dst_MSSQL2008</DatabaseType>
<DatabaseUsername>sa</DatabaseUsername>
<DatabasePassword>12345</DatabasePassword>
<CompanyUsername>manager</CompanyUsername>
<CompanyPassword>12345</CompanyPassword>
<Language>ln_English</Language>
<LicenseServer>mv-05910a0046:30000</LicenseServer>
Thanks
Edited by: Andres Naranjo on May 14, 2010 12:47 AM
Edited by: Andres Naranjo on May 14, 2010 3:56 PM
Edited by: Andres Naranjo on May 14, 2010 3:58 PM

Had the same error
'The TAO NT Naming Service has stopped.'
Was using the external IP address for the LicenceServer - which is on the same server as SAP DIserver and B1WS.
I changed to using localhost:30000 and that solved the issue.
I suspect if I had used the internal IP it would have worked as well (ie the one you get from ipconfig) but as it works I'm not going to test that.
HTH

JDBC with SQL Server

Hi,
I am trying to connect to a SQL server database by giving table name in (SPVC) database as spvc.dbo.tablename.. If i want to access another database (SPVC_D), how can i do it without changing my java code?? Can i be able to add the database name to the connection string and i can remove the hard coding (spvc.dbo.) from my java code?? How shall i be able to do that..
Please let me know.. I am very new with JDBC with SQL server..
Thanks
Praveen Padala

In the MS SQL Server that I use, the following syntax
spvc.dbo.tablename
Breaks done as follows...
<database>.<user>.<tablename>
However connections are always to a database. Thus when one uses the above syntax it basically runs 'in' the one database and accesses another.
Depending on various attributes of the tables, if and only if, a table called 'tablename' exists in a database called 'spvc_d' then if you connect to 'spvc_d' then you can access 'tablename' just by using 'tablename'.
So if that is what you are doing you will not have a problem.

Connectivity with sql server

Dear community members;
I am using Oracle 10g DB. Now I want to connect with SQL Server 2005. Is there any possiblity for connectivity. Because we have to pick some data from sqlserver on online transaction entry time.
Waiting for usefull response.
Thanks
Shahab Ahmed Khan

I am using oracle 11gR1 on windows 2003.
This is my initaccessdb.ora(Path HS/ADMIN)
HS_FDS_CONNECT_INFO = ACCESSDB
HS_FDS_TRACE_LEVEL = OFF
Listner File
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = APPSERVER)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM=extproc)
     (SID_DESC =
     (SID_NAME = accessdb)
(ORACLE_HOME = E:\app\Administrator\product\11.1.0\db_1)
(PROGRAM = ACCESSDB)
     (ENVS=LD_LIBRARY_PATH=D:\)
TNSNAME.ORA
ORCL =
(DESCRIPTION =
     (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.0.14)(PORT = 1521))
     (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME= ORCL)
ACCESSDB =
(DESCRIPTION=
     (ADDRESS =(PROTOCOL = TCP)(HOST=172.16.0.14)(PORT=1521))
          (CONNECT_DATA =
          (SERVICE_NAME=ACCESSDB))
               (HS = OK)
I successfully completed all steps as mentioned in your sending links documents but when i test my dblink query it gives the error message
SQL> conn sys as sysdba
Enter password:
Connected.
SQL> conn ahmed
Enter password:
Connected.
SQL> drop database link test;
Database link dropped.
SQL> create database link test using 'ACCESSDB';
Database link created.
SQL> SELECT * FROM EMPLOYEE@TEST;
SELECT * FROM EMPLOYEE@TEST
ERROR at line 1:
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from TEST
Note: Please tell me that should i install ODBC driver ("Microsoft Access Driver *.mdb).If this should be installed then i have done correctly.
Thanks

Using APEx with SQL Server

Similar Messages

Maybe you are looking for