Using Apple TV with a Logitech Harmony One remote

I just switched to the Logitech Harmony One remote. It works great with all my equipment execpt my Apple TV (first generation).
What settings should I use for the Logitech Harmony One remote to recognize my ATV?

Stephen is correct.
Select "Add a Device" > "Computer/Media Center PC" > Manufacturer: "Apple" > Type in: "Apple TV" > Then simply answer the questions about what other devices are to do what when you are using this device. i.e. "Use my receiver to adjust the volume" for example.
By default the directional buttons and select button will move your pointer and dive in to your selections. I believe the Menu button backed out to top menus, but I may have manually set that up.
Either way, it works flawlessly. Good luck!

Similar Messages

How to use Apple TV with Logitech Harmony remote WITHOUT having to unpair?

I have a Logitech Harmony 880 remote which I am trying to set up with my new Apple TV.
Within the Logitech software I set up Apple TV as a MediaCenter PC device.
I've followed these instructions already.
http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/8480
The Harmony remote works great with the Apple TV if I follow these instructions to unpair the remote EVERY time I want to use it. Once I turn the TV off or switch to another activity, it loses this setting and I have to unpair again when I go back to Apple TV.
I would like to be able to use my Harmony Remote without having to unpair constantly.
I have tried to pair the Apple TV with the Harmony remote. This only served to render my Apple Remote nonfunctional and I still have to unpair every time.
I tried to use the Harmony remote's IR learning mode directly with my Apple Remote instead of using the settings from the database. I still have to unpair every time.
I tried to go into the Apple TV > Settings > General > Remote and have Apple TV learn my remote's IR. There are instructions to hold down each button until a progress bar is full. The first button is the up arrow. The progress bar never activates when I push the up arrow on my Logitech Harmony remote although I know the Apple TV is somewhat recognizing the button press because I hear an auditory beep and see the led light on the front of the Apple TV flash when I push the button. None of the arrow buttons of the Harmony remote would activate the on screen progress bar although some buttons such as the Volume buttons would.
At this point, I resigned myself to having to unpair every time I accessed my Apple TV so I thought I would get smart and program the unpair button to show up as one of the additional buttons on the lcd screen of the Harmony Remote when I start the Apple TV activity. I'm sure by now you can see where this is going. My attempts to outsmart my advanced technological devices failed dismally as it seems the unpair option of the Harmony remote will only function correctly if I first press the Devices button and then choose the Apple TV.
I was wondering if anyone had gotten a Logitech Harmony remote to work successfully with the new Apple TV without having to use the unpair command every time and if so, what did you do to resolve this issue?

I'm having the same issue except that I set up the Apple TV as a Media PC on my Harmony 770 and that gave me the unpair addition button that actually works. Per your idea, I've been using that to gain functionality of my Apple TV 3 from the Harmony remote.
However that's just a workaround. I've gone a step further and learned the raw commands and it still won't work. This makes me think the issue is on the Apple TV refusing to recognize the remote unless you press "unpair" everytime.
Is anyone else having this issue on the current Apple TV 3 firmware?

Logitech Harmony One with Mac OS Lion

Recently purchased a new Harmony One remote and have yet to set it up. I am running a macbook pro that was purchased last summer right after thunderbolt was introduced on the macbook pro's. I have since upgraded to Lion.
The question is that I have found people having issues with the software logitech provides and that it can only be run if you change the Mac OS to run at 32bit vs 64bit.
Is this bad for the computer to change form 32 to 64?
And if not how do you get it back to 64 from 32 once you have made the change to put he software on the machine?
Thanks!

Try downloading the DMG file again. It may be corrupt or incomplete.

IPod with Universal Dock and Logitech Harmony 880 Remote

Is anyone successfully using their iPod with Universal Dock and the Logitech Harmony 880 remote? Does it need to be trained or does can you use the logitech software to program the remote?

Is anyone successfully using their iPod with
Universal Dock and the Logitech Harmony 880 remote?
Does it need to be trained or does can you use the
logitech software to program the remote?
You can program the 880 to work with the Universal Dock with just the logitech software. Just add a Digital Music Server and when asked what Model it is enter "iPod Universal Dock". That's it. For some reason Logitech tech support says it can't be done but me and and a couple of friends have done it without any issues.

I am trying to use apple configurator with ipads. I have been successful with all our ipads but 1. It will not allow me to add apps. The error I get is that it is refreshed but with errors e

I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either

Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile.

HT2208 Can I use Apple TV with a MacBook Air?

Can I use Apple TV with my MacBook Air?
The promotional material online doesn't make this clear but I like the sound of what' said on Apple TV.
I'll buy one now if it works!

In what way? You can use home-sharing to stream your iTunes library and Photos. If it's a recent MBA then you will also be able to mirror when Mountain Lion is released.

Hi, Im using apple 5s with gold color , I want to replace it with space grey color .Is it possible in apple store?

Hi, Im using apple 5s with gold color , I want to replace it with space grey color .Is it possible in apple store?

If you are within the return period policy of the retail where you purchased the
iPhone, return it and buy a new one. If outside the return period, sell the current
iPhone privately and use the money received toward a new iPhone. Or buy a
case in your preferred color for your current iPhone.
If purchased from Apple US, return period is 14 days. I believe it is the same elsewhere,
but check with your local Apple store. Be advised, that even if you are within the return
period, returns are accepted only in the country of original purchase (EU is one country
for this purpose).

Can i use apple tv with my dish sat equipment and is it hard to connect

can i use apple tv with my dish sat equipment.. how hard will it to connect?? what accesories to I need?? Will it find my wireless or do i need to enter wireless info??

No, Apple TV connects directly to your TV. It's as simple as connecting via HDMI and then following the on scren instructions. It will find your networks but you will need to enter your password when setting it up.

Can I use Apple TV with an SDTV?

Can I use Apple TV with my Samsung SDTV?

To add to the above. The device was designed to work with HDMI and there will be no guarantee with any adapter. Even if it were to work, you will have issues with resolution, aspect ratio, and be unable to play protected content (i.e. iTunes, Netflix). You would also need to purchase a DAC in order to have audio. Functionality could also cease at any time.

Can I use Apple tv with an Apple id?Thanks

Can I use Apple tv with an Apple id?Thanks.

Then you should be fine, mirroring has nothing to do with an Apple ID. As long as the Apple TV and iPad (2nd gen or later) are on the same network you can use the feature
http://support.apple.com/kb/ht5209

Can I use Apple TV with a Toshiba 32AV505D television?

Can I use Apple TV with a Toshiba 32AV505D television?

Can you plug it in? If so, it will work.

Can I use apple TV with a monitor?

Can I use apple TV with a monitor?

if the monitor have an hdcp or displayport or dvi that support hdcp yeah
but if it don't have speakers you have to connect some amp which have optical input to get sound
and monitors with only subD or other analog sources or dvi which dont support hdcp would not work

Can I use apple tv with Hughesnet?

Can I use apple tv with Hughesnet?

No...
...well yes but it would be an unpleasant experience.
This is because of the slow speeds of Hughesnet and the latency of the satellite system.

Can I use apple sharing with my windows 7 pc and apple tv?

Would like to go to atv select computrt so I can access my photos and home video from my windows pc to my atv

Can I use apple sharing with my windows 7 pc and apple tv?
Yes.
Sorry, I don't understand the rest of the question.

Hey im using apple 3g with os 4.2.1 but i cant install whatsapp for this need a help

hey im useing apple 3g with os 4.2.1 but i cant install whatsapp for that how can i install whatsapp!!!!please reply me soon

The following is from the Compatability section (left column in https://itunes.apple.com/us/app/whatsapp-messenger/id310633997?mt=8 )
Compatibility: Requires iOS 4.3 or later.

Using Apple TV with a Logitech Harmony One remote

Similar Messages

Maybe you are looking for