Using as Media Center.....what keyboard?

Just curious on what keyboards/mouse everyone bought to use their Mini in their living area on the TV?
Someone said to get a bluetooth set but I looked at and office store and the cheapest and only one was $200!
What's wrong with just getting the wireless keyboard/mouse sets that have the base units as they are much cheaper?
If you suggest bluetooth as well where do you get a cheap set. I'm spending almost half the cost of the mini on the keyboard/mouse!

I use a logitech wireless keyboard and mouse I picked up from comp usa a year or so ago with my mini. It comes with an extender for the usb adaptor that you can place in front of your computer, or anywhere up to 4 feet or so away from the unit so you can get better reception. That being said, I'm about the same distance from the TV as you, have my mini underneath in a cabinet, and have the wireless dongle as far away from the mini as possible (but still in the cabinet) to get good reception while sitting on my couch a good 10 feet away or so. I know I'm at the limit of the range because sometimes I have problems with mouse clicks. All I have to do is move the mouse a little closer and I'm good.
As far as the cables to hook up for surround sound, you're looking for a mini-optical adaptor or straight up cable that goes to an optical input on your surround decoder. Apple sells some, I bought mine from american digital. Here's a link to the one I got which works just fine:
http://www.american-digital.com/prodsite/product.asp?p=855&c=170&name=Klone5-10F t.Tosto3.5OpticalCable
You have to do some funky things to enable a digital surround stream through the cable... it's not as simple as plugging it in and going. If you're using dvd player (the built in one from apple) then you'll have to set it in the preferences. Personally, I bought a copy of Media Central from equinux
http://www.equinux.com/us/products/mediacentral/index.html
which is a tad buggy at the moment after the latest apple updates, but was rock solid and pure joy to use up until then. Hopefully it'll get back on track.
Let me know if there's anything else I can help with!

Similar Messages

ITunes won't open after using Windows Media Center

Today I used Windows Media Center so I could play my music and videos through my X-Box. Now when I try to open iTunes it comes up with the message "The folder itunes is on a locked disk or you do not have write permission for this folder". Nothing has been changed, I did not lock anything, and now the folder automatically reverts itself to Read-Only. Please help

I also tried un and re-installing itunes but it did nothing

I think some one is using my Game Center what can I do

I have been plying this game called (clash of clans) and I know that some one is using my Game Center i have changed my password and my email and all my secituty questions but still some one is getting on what can I do

What makes you think someone is "using your Game Center"?

I cannot watch .mov files using any media player-what can i do??

Hello all
I am attending an online masters program and am using Scopia
however the recorded lectures are downloaded as mov. files and I cant view using any media player-quick time,VLC,WMA..what can I do or use
PLEASE PLEASE help me

You can also try Flip4Mac it's free.
You have the os for your phone/iPad, not your computer which would be OSX xx.xx.x
Check your OSX and download the one you need.
The current version for download is 10.7.5
If you have an older Mac OSX use the older version download
https://www.macupdate.com/app/iphone/17787/flip4mac-wmv-player

Media Center internal IR receiver

Is it possible to turn of the internal IR receiver on my TX2500 Tablet notebook?
My wife runs an HP M8100 desktop and she prefers to use the media center wireless keyboard. Unfortunately, the receiver in my laptop is too sensitive and even picks up when I try to block the sensor.

you can go into the device manager and see if you can disable it from thier or contact hp support and ask them if thiers a way you can modify the siginal
it recieves or change the siginal comming from the keyboard ot mouse ....

Windows XP Media Center Edition FAQ

What is a Media Center PC?
It is basically a regular PC, but designed to fit into your home entertainment system to replace your DVD player, Hi-Fi, TV set-top box, as well as allowing other functions as email, web browsing and more, all from the comfort of your armchair, or elsewhere
Many new Media Center PCs (MCPCs or Home Theatre PCs - HTPCs) are styled like hi-fi components to blend in under your TV, while many are regular PCs with extra multimedia functions.
What is Windows XP Media Center Edition?
Windows XP Media Center Edition (or XP MCE for short) is basically Windows XP Professional (Service Pack 2) without advanced networking support (but including Remote Desktop Connection) and extra applications to turn your PC into a fully fledged Home Theatre PC (HTPC). The main Microsoft Media Center appplication allows a full screen interface suitable for viewing on TVs (pictured below left) and controlled by an easy to use Microsoft remote control device (below right), so you can watch and record TV, view DVDs and listen to audio CDs and digital music files.
How do I get WinXP MCE?
At the time of writing, XP MCE is only available as an OEM pack which you can purchase from your nearest dealer or online reseller, or if pre-installed on a purchased system. MCE is currently only available as a 32bit (x86) version, but works on 64bit systems.
The Media Center application is also included with the Home Premium and Ultimate editions of Windows Vista.
How do I install WinXP MCE?
MCE installs the same way as any other version of Windows XP. However it cannot be installed as an upgrade, you must do a clean install. MCE comes on two disks; a WinXP XP SP2 disc, and the MCE extras disc. Boot from CD1 as you would normally when installing Windows. The setup screens will indicate Windows XP Professional, this is normal. During the graphic part of the install process, you will be prompted to insert CD2. This is obviously the second CD of the set which you should insert, as it contains the necessary extra Media Center enhancements. When it is done, Setup will ask you for the "Windows XP SP2 CD". It is actually just asking for the first disc again, so reinsert it and let it continue.
When install is complete, the system will reboot, and you will see the normal Windows XP desktop, though with a slightly different theme. To begin using the Media Center program straight away, click on Media Center in the Start Menu to begin the Media Center Setup wizard.
What graphics hardware is required for MCE to work correctly?
MCE works with DirectX 9.0c, so ideally your hardware at a minimum needs to be DirectX 9.0 compatible.
MCE requires a minimum of 64mb video RAM (shared or dedicated), 128mb recommended for the full visual "eye-candy" interface effects.
For Nvidia GPU chipsets, MCE drivers can be found here: nVidia Drivers. You'll need at least a Geforce FX5200 for MCE to work (however I have it running on an integrated Geforce 4 MX with no problems).
For ATI GPU chipsets, drivers for MCE can be found here: ATi Drivers. You'll need at least a 9250 for MCE to work, but I understand that the 9200 may also suffice.
Unfortunately, I understand that SiS and Via (S3) chipsets (as found on many mobos with integrated VGA) are NOT MCE compatible. Some Intel integrated VGA chipsets will work now, you should refer to Intel's website for updated drivers. I also understand that Via have introduced MCE compatible drivers for their Epia SP13000 ITX board, again refer to Via's website for correct drivers. However, it is recommended to use an add-in VGA card for best results, unless you have a new board which has integrated Geforce 6100 or ATI Xpress chipsets
What TV hardware works with MCE?
In order to display TV output, MCE requires an MPEG2 stream to display. It cannot encode this itself, so requires a hardware based TV tuner / capture card, such as the Hauppage PVR MCE series, or the MSI Theater 550PRO (above left). The card receives analog video through the aerial connection, or svideo / composite inputs, encodes it into MPEG2 format, which MCE can display.
This type of analog card is required to connect a cable or satellite box (eg Telewest, NTL or Sky in UK). Using the Microsoft remote receiver, two supplied IR blasters affix to the set-top box, so MCE can automatically change channels when needed.
For best picture quality on digital TV though, you can use a software-based DVB-T card, such as the Hauppauge Nova-T or the Black Gold DVB-T (above right). Using a regular aerial, these receive high quality digital terrestrial (OTA) signals (eg the Freeview service in UK), which are broadcast in MPEG2 format, and therefore no encoding is required. In the USA, ATSC is the digital terrestrial standard used, as DVB is not available there.
Unfortunately UK users of DVB-T cards will currently not be able to make use of DVB subtitles, interactive text-based services such as Teletext and BBCi, or listen to the Digital Radio services available on Freeview. UK DVB Digital Audio services are now available with MCE Rollup 2.
Unlike with VGA cards, MCE requires that your TV hardware has special BDA (Broadcast Driver Architecture) drivers which are MCE compatible. Check your hardware manufacturers website for compatible drivers.
Unfortunately, analogue TV hardware that is software-driven (such as MSI TV@nywhere and Vox) won't work in MCE.
Windows Vista Media Center will introduce support for cable (DVB-C) and satellite (DVB-S)tuner cards
Do I need any other software to make MCE work?
As MCE is essentially based around Windows Media Player 10, you will be aware that WMP cannot play DVDs until you install a suitable DVD codec. This is also the case with MCE, as until you install this MPEG2 codec, MCE won't play ANY video (including TV). So you will also need to purchase additional MCE compatible DVD player software, such as Cyberlink PowerDVD 6, Intervideo WinDVD 6, or Nvidia's DVD Decoder MPEG codec. Results can be varied using different codecs, so it is best to try a trial version of such software to see which gives you the best results before purchasing. You may find that suitable DVD software may already be supplied with some VGA or TV tuner cards.
Anything else I need?
You will also require an internet connection (not imperative, but certainly very useful) in order for MCE to access the internet in order to find and download TV guide listings, and album and artist information when playing CDs, MP3s and WMAs.
Without guide information, you will have to manually schedule TV recordings, and no programme information will be available.
If you are planning on having your Media Center in your living room, the Microsoft Remote Controller will allow you to control all aspects of the MCE interface without the need for a keyboard or mouse connected.
If you are connecting your Media Center to your TV, then your video display device will need TV-out capabilities (S-Video or Composite). S-Video offers better picture quality over composite video, but you will need to ensure your TV supports S-Video input, otherwise you will just see black and white video.
If your TV supports RGB inputs, then you may be able to obtain a VGA > RGB adaptor, which offers even better picture quality (search with Google, there are lots of sites about this). Many modern LCD and plasma TVs also support direct VGA / DVI inputs. VGA > RGB/SCART is only compatible with ATI Radeon VGA cards.
Can I watch one channel while recording another?
Yes, but you will need two identical TV devices, eg 2x DVB-T cards. You cannot have one analogue card, and one digital, as MCE presumes both hardware devices receive same channels, and can pick and choose between them. (However in the USA, you may have two analogue tuners, and one HDTV tuner)
This is straightforward when using two identical DVB-T cards. MCE has a channel list and guide data, so for example you are watching BBC1 on one tuner, MCE uses the other tuner to record the other programme on ITV2. Both cards are receiving the same input.
It gets a little more complicated if you want to do the same with a paid subscription service, such as NTL Cable or Sky Satellite in UK. As well as having two matching tuners (although I understand that some companies, including Hauppage, are releasing "dual-tuner" cards) you will also require two set-top boxes, with a subscription for each, as MCE needs to be able to change the channel on each set-top box seperately.
Good links....
Windows XP Media Center Edition 2005 homepage
The Green Button - very good MCE community forum
MCESoft - for all sorts of plug-ins and extras for MCE
XPMCE.com - Windows Media Center forums
ukShazam.com - Media Center help & more
Note: MSI is not responsible for the content of external links[/b]
Look out for me in the XPMCE forums if you need further help!
That's about it for now, hope you find it useful. As I think of (meaning "remember" ) other stuff I'll add it above. If you know something that I've missed out, please post below with as much info as you can, and I'll add it to the guide, with a credit to you!
If you need help to solve a problem or want to ask a question, then START your own thread, with as much info as you can, please do NOT post in this thread, this thread is only for tricks,tips and useful reference info.

For some reason when using the "certified" MCE version of the Forceware drivers, after a short while all the buttons in the menus become "corrupted"
The simple solution: use regular XP/2000 version of Forceware drivers. They still work perfectly in MCE2005, and the graphical corruption doesn't appear.
nVidia Drivers
EDIT: this problem appears to have been corrected in the recent Rollup 2 Update

How can I convert the metadata tags on my mp4s to xml files so that they can be read in Windows Media Center?

I have a library with almost 3000 movies and TV shows that I have fully tagged. However, I have decided to start using Windows Media Center and it does its metadata tagging through XML files. I wanted to know if anyone could tell me if there was a way to extract the metadata from those mp4s and convert them to a format that WMC could read? Thanks!!!!

iTunes can make XML playlists so it might be all you need, I made a simple one file playlist and exported it from iTunes. The result is shown below. In principle I could delete the playlist and the entry from the library, as long as I don't delete the file, then later reimport the XML playlist file. I haven't tested this particular scenario, but I assume that iTunes will read all the properties as listed unless it can read some kind of tag from the file itself in which case the current value of the tag would take precedence.
What I don't know is what media center would make of this file, or what its files look like, however assuming they have a similar structure that can be decoded then it should be possible to read data from the iTunes library and write out a text file that will make sense to media centre.
Video Test.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Major Version</key><integer>1</integer>
<key>Minor Version</key><integer>1</integer>
<key>Date</key><date>2013-09-26T23:30:26Z</date>
<key>Application Version</key><string>11.1</string>
<key>Features</key><integer>5</integer>
<key>Show Content Ratings</key><true/>
<key>Music Folder</key><string>file://localhost/E:/iTunes/iTunes%20Media/</string>
<key>Library Persistent ID</key><string>CCF046191585EA85</string>
<key>Tracks</key>
<dict>
<key>155170</key>
<dict>
<key>Track ID</key><integer>155170</integer>
<key>Name</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Artist</key><string>Abbott & Costello</string>
<key>Album Artist</key><string>Abbott & Costello</string>
<key>Album</key><string>Abbott & Costello: "Two Tens For A Five" & "Who's On First"</string>
<key>Genre</key><string>Comedy Clip</string>
<key>Kind</key><string>MPEG-4 video file</string>
<key>Size</key><integer>110483524</integer>
<key>Total Time</key><integer>532096</integer>
<key>Year</key><integer>1950</integer>
<key>Date Modified</key><date>2013-06-19T17:35:18Z</date>
<key>Date Added</key><date>2012-12-01T17:30:57Z</date>
<key>Bit Rate</key><integer>156</integer>
<key>Comments</key><string>www.dvdvideosoft.com</string>
<key>Artwork Count</key><integer>1</integer>
<key>Persistent ID</key><string>5AF2C490D1E065CD</string>
<key>Track Type</key><string>File</string>
<key>Has Video</key><true/>
<key>HD</key><false/>
<key>Video Width</key><integer>1136</integer>
<key>Video Height</key><integer>640</integer>
<key>Location</key><string>file://localhost/E:/iTunes/iTunes%20Media/Home%20Vide os/Abbott%20&%20Costello_%20_Two%20Tens%20for%20a%20Five_%20&%20_Who's%2 0on%20First_.mp4</string>
<key>File Folder Count</key><integer>3</integer>
<key>Library Folder Count</key><integer>1</integer>
</dict>
</dict>
<key>Playlists</key>
<array>
<dict>
<key>Name</key><string>Video Test</string>
<key>Playlist ID</key><integer>1930541</integer>
<key>Playlist Persistent ID</key><string>30BF2769C94F7F29</string>
<key>All Items</key><true/>
<key>Playlist Items</key>
<array>
<dict>
<key>Track ID</key><integer>155170</integer>
</dict>
</array>
</dict>
</array>
</dict>
</plist>
Such files are easier to interpret if opened with Notepad++.
tt2

Media Center DVD 'Stutters' on MEGA 865

Hi
I am an IT professional, but I am a newcomer to the MEGA series PCs. I bought a MEGA 865 Delux for a 'computer newbie' friend as payment for a favour, and I am in the process of configuring it all now.
Spec is
MEGA 865 flashed to bios 1.2
MSI DVD Player DR8-A2 BIOS 1.6
NO TV CARD (yet)
Win XP PRO SP2
512MB RAM
Celeron 2.0GHz (yes I know, but I had a new one going spare, it'll do for now)
I have applied ALL latest drivers
I have applied ALL latest BIOS patches
Windows XP is fully patched up to SP2
I am currently running in 1024x764 Truecolour 70Hz mode.
Everything works great, my friend should be really pleased with it ... except
MEDIA CENTER III !!!
Now that was kind of the idea of buying the MEGA PC, my friend could use it with the remote control for DVD, Radio etc etc, but when I play a DVD using the media center it 'stutters', the video and sound are interrupted and it really is unwatchable.
Looking at the CPU resource is see that it is strained to 100% utilisation.
If I run the same DVD Movie with PowerDVD (came with the MSI DVD Drive), or even with Windows Media Player, it plays beautifully and the CPU is comfortably down at 40% utilisation. Unfortunately the remote seems to do nothing for PowerDVD.
Is anybody finding that the Media Center works great on their system? (if so, what's the secret?)
Has anybody else encountered similar problems to mine?
Does anybody know how I could fix the problem so that when I present this great new system to my friend as an expression of my gratitude, it is not 'flawed'?
Please help if you can, I would like to deliver the system in the next couple of days.
Thanks
Steve

Thanks for the advice everyone.
After much searching I found the elusive registry changes and applied them to my system. Unfortunately these changes made no discernable difference to the DVD playback.
While I appreciate that there are a number of Open Source projects in development (dependant on 'Girder', pay software that still does not appear to FULLY replace the advertised functionality of the Remote/LCD/Radio etc), and also alternative products that I could purchase, I do not feel that I should have to buy these to make my MEGA media center PC play DVDs.
It's not as if the inability to play DVDs is a minor issue in a Media Center. It's fundamental!!
If it will not work as a media center PC 'as supplied' then it seems to me that I should return it to the retailer and buy a 'Shuttle PC' for much less money. I could spend the savings (I reckon on about £70) on a better CPU or just pocket the difference. Features and software that do not work are of little use to anybody.
With all due respect to you all, if everybody who bought the system and had these problems returned it to the store as 'not fit for purpose' then I suspect MSI would have resolved the issue long ago. It seems to me that end user tolerance has resulted in MSI's indifference.
If I have no fix by Thursday then it's back to the store.
I have mailed MSI Tech Support, hopefully they will come up with something as the system looks great otherwise.
Still open to suggestions that do not include 'break up the CD' or 'buy this other software'.
Thanks
Steve

Actiontech router and Windows Media Center on Win8

While waiting for Verizon to solve their network problems and actually get light to the ONT, they left the actiontech router in my house, so I took sometime to get to know it.
It's definitelly something I don't want or need in my network. It's not a bad router if you didn't have a business class product from before (actually it is pretty much the best you can get short of going to hardware firewall routers in the class of Zyxel, Watchguard and some high end, business class, Dells, Ciscos and Netgears).
Well... needless to say, I am running such a router (a Watchguard XTM-26W) and have security subscriptions with them to protect my network. In addition, it offers functionality and discrete access controls otherwise impossible with consumer grade products.
Now, back to the basic subject: I noticed something ominous and wonder if anyone else has noticed it too. I run my TV service through a machine that uses a Ceton 4-HD PCI-E tuner card with a multistream cablecard. It is installed on top of Windows 8 Pro, 64 bit and I use Windows Media Center as my core TV interface (guide and all). The machine is set to go to sleep by itself if no activity (and TV it's the only thing designed and intended to do and the only thong it does) is detected on the tuner for 5 minutes. This works flawlesly and always did while on Comcast service.
Now, the problem: you put the Actiontech router in the network (regardless of whether it's before or after the firewall gateway) and the machine fails to go to sleep. The router introduces some dort of chatter in the networkk that keeps the HDD active and the computer alive in perpetuity. Did anyone notice anything similar? What is your experience with this?
Obviously, I have no intent to keep the Actiontech router in the network under such conditions. For what I know, it is illegal in fact to put out products that send unsolicited traffic through one's network. Not to mention that it is a security risk. Might Verizon re-consider their insistence on deciding what routers to support and what don't or simply drop all support for all the routers since none is ever really needed? They only have the job to deliver a public IP to my equipment and I should be left alone otherwise (according to FCC). Which they otherwise fail to do by putting a piece of equipment that is theirs in the way and mandating that I use it, since 192.168.x.x is NOT a public IP, according to Internet Council.

LeoZ wrote:
Actiontec responded to my inquiry. See below.
It turns out it's another Verizon problem...
"Honestly no idea what would cause the chatter on the network to prevent sleep\stand-by to function.
Verizon would have to review the issue and see what in the code programming would cause this."
Stop the chatter. Put your Media Center hardware behind another firewall. Like I said mine is Linux IP-COP, which constanty drops these trash packets from the single STB I have on the MOCA COAX.
All from the Verizon network router. Almost like a broadcast storm!
This is a Motorola STB, My Cisco had two real IP addresses asigned by DHCP, and they did not do this. I turned in all my STB hardware and ordered a single STB, and was sent Motorola when I had been using Cisco.
wan-1 in into my Linux box and lan-1 is out of it. Then all my harware which includes Media Center PCs are gigabit switches, not exposed to this. I guess you could use another router and not a Linux PC. This STB is going back soon.
Time
Chain
Iface
Proto
Source
Src Port
MAC Address
Destination
Dst Port
22:53:42
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:22
RED DROP
wan-1
IGMP
192.168.1.1
00:7f:28:5c:07:1b
224.0.0.1
22:53:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:53:01
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:51
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:41
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:52:01
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:51
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:41
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:31
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:21
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302
22:51:17
RED DROP
wan-1
IGMP
192.168.1.1
00:7f:28:5c:07:1b
224.0.0.1
22:51:11
RED DROP
wan-1
UDP
169.254.1.135
21302
00:25:f1:3d:d9:37
255.255.255.255
21302

Mega 180-----Media Center III and a Vid Card----Working???

I'm trying to narrow down what is causing Media Center III to crash intermittently on my Mega 180.
I think I have it narrowed down to the SoundStorm drivers conflicting with Media Center III
But I want to eliminate that it is a problem with the 18G "Crush" onboard video chipset. I am using the onboard only.
Anybody have a vid card in their AGP slot of the Mega 180 and use Media Center III??
Are you still getting crashes in Media Center III??
John

Finally I give up using the Media Center. I'm using now Girder with Nathans great plug in (see MSI Mega series girder plugin version 1.0 available ). The only disadvantage is that the fancy leds are not working.
Regards
Patrik

Mac + Windows Media Center

I currently have both a pc and a new Macbook. On my pc i use Windows Media Center to record tv shows that i've missed. I'm able to network the two computers to view and share files however i can't play the recorded shows on my Mac. I see them in the shared file but its not opening it. It says "Error opening movie". Can anyone please help me? I'd really like to watch my recorded shows from my Mac laptop and not have to be stuck behind my pc. Please Help???
Thanks

You need to export the Media Centre recordings into a format which will be viewable on the Mac.
Taken from the Media Portal Forums
Here is a quick guide to strip off the ASF wrapper MS use for their DVR-MS file format. This is used in MediaPortal for recording with MPEG-2 capture cards like the Hauppauge PVR-250 / 350 models.
What you need to have...
1. Graphedit http://www.digital-digest.com/dvd/downloads/graphedit.html
2. Cyberlink DirectShow filters MPGMUX.AX & CLDUMP.AX (You'll have to find these)
What you need to do...
1. If not done already register the two filters listed above from the directory where they have been installed.
regsvr32.exe MPGMUX.AX
regsvr32.exe CLDUMP.AX
2. Start Graphedit and the click 'File' then 'Render Media File'
3. Choose the *.DVR-MS file you wish to make into a *.MPG equivalent.
This will automatically build a Graph ultimately providing an output to the Video Renderer and Default DirectSound Device.
4. Remove all filters except the *.DVR-MS output box.
5. Click on 'Graph' then 'Insert Filters' within Graph Edit.
6. Go to the 'Direct Show Filters' section and add 'Cyberlink MPEG Muxer' (MPGMUX.AX) to the Graph.
7. Now add the 'Cyberlink Dump Filter' (CLDUMP.AX) to the Graph and it will prompt for a filename give it a name with a .MPG extension. i.e. Test.mpg.
8. Leave the Filter addition window and connect the DVR Out-1 connector to Audio In on the 'Cyberlink MPEG Muxer' on the Graph.
9. Also connect the DVR Out-2 connector to Video In on the 'Cyberlink MPEG Muxer'
10. Next connect the Output pin from the 'Cyberlink MPEG Muxer' to the 'Cyberlink Dump Filter'
11. You are now ready to get your MPG equivalent file click on 'Graph' and then 'Play' (or click the green play button)
12. You'll notice a green progress indicator moving from left to right. Once complete you will have successfully dumped your MPG file in the same quality it was recorded without re-encoding!!!
Note: The MPG file should be slightly smaller the the original. Don't worry if they are not exactly the same size as we have stripped off the ASF guff.
You can do what you want with the MPEG file. i.e. Convert to AVI, Deinterlace it, Crop It, Resize it, Burn it to DVD/SVCD...etc etc
It worked fine with the two files I tried, but I then ran out of time to try doing something with the resulting MPG files. As I was using RDC to connect into the Media Centre, even playing them wouldn't work as expected. I did try VirtualDub but it didn't like the mpg file, but I am not sure if this was a RDC issue or an issue with the mpg files.

K8N Diamond - sound from PCTV media center 300i

I have the following mainboard: K8N Diamond (NVIDIA, nFORCE, 4 SLI Chipset Based) - which I am very happy with.
I am watching TV on my PC using: PCTV Media Center 300i.
I have not yet found a way to hear the sound from the TV. There is an internal audio cable (4-pin) from the PCTV card which should be connected to the sound card. But I do not where to connect on the mainboard.
Can anyone help ?

I'm not sure as I don't have anything plugged in on JCD1, everything is working for me without this cable. Of course at the moment, I don't have a TV card either.
I'll see what I can find out, you may want to send an email to the MSI technical support. This is just a public forum and I don't think they monitor it.

Can't get Xbox 360 Media Center Extender to work

I am using Windows 7 Ultimate x64. This is a retail copy. I had previously set up Windows Media Center and successfully set up my Xbox 360 as a Media Center Extender.
After a long hiatus of using Windows Media Center, I went to watch a movie in my media library through my Xbox 360. It would appear to initially connect and then show the Windows Media Center loading screen and say "Contacting..." After about 30 seconds, it would display an error asking me to make sure my Windows Media Center PC is turned on (it is). I ran the Windows Media Center network test in the Xbox 360 and it tested fine.
I attempted to delete the Media Center Extender in WMC and set it up again, but it always fails with an error "An error was encountered while configuring your computer for use with this Extender" at the part where it says "Configuring your Extender".
I looked in the Event Viewer under the Media Center section and found event ID 543:
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          3/3/2010 10:13:20 PM
Event ID:      543
Task Category: Configuration
Level:         Error
Keywords:
User:          WILL7\swsander
Computer:      WILL7
Description:
Media Center Extender Setup failed to create the PnP device with ID: uuid:10000000-0000-0000-0200-00125AC6E86F (timed out after 120000ms).
Error: Element not found.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>543</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-03-04T03:13:20.805493500Z" />
    <EventRecordID>333</EventRecordID>
    <Correlation />
    <Execution ProcessID="9408" ThreadID="9760" />
    <Channel>Media Center</Channel>
    <Computer>WILL7</Computer>
    <Security UserID="S-1-5-21-2626302321-2836749625-3976135476-1001" />
</System>
<EventData>
    <Data Name="ID">uuid:10000000-0000-0000-0200-00125AC6E86F</Data>
    <Data Name="Timeout">120000</Data>
    <Data Name="Error">-2147023728</Data>
</EventData>
</Event>
I also tried turning off the Windows firewall on the Windows Media Center PC, but this had no effect on the outcome. I also tried deleting the Microsoft Windows Media Center Extender Host certificate and restarting the Network List Service, but these steps to did nothing to fix the issue.
I am using the same computer with the same NIC with the same Ethernet cable with the same SOHO router (Linksys WRT54GL) with the same Xbox 360. Any advice would be welcome at this point.

Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:51:55 PM
Event ID:      592
Task Category: Configuration
Level:         Warning
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Your Media Center Extender was set up successfully, but failed to connect (timed out after 180000ms).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>592</EventID>
    <Version>0</Version>
    <Level>3</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:51:55.176149000Z" />
    <EventRecordID>428</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="15676" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="Timeout">180000</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:54 PM
Event ID:      506
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender account Mcx1-ERIC-PC has been created for the Extender with ID: uuid:10000000-0000-0000-0200-001DD847D7F4.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>506</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:54.615896200Z" />
    <EventRecordID>427</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="9024" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="User">Mcx1-ERIC-PC</Data>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:49 PM
Event ID:      500
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Xbox 360 Media Center Extender 'uuid:10000000-0000-0000-0200-001DD847D7F4' discovered at address 192.168.1.2.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>500</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:49.155888500Z" />
    <EventRecordID>426</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="9024" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="DeviceName">Xbox 360 Media Center Extender</Data>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
    <Data Name="Address">192.168.1.2</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:36 PM
Event ID:      573
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender found:
ID: uuid:10000000-0000-0000-0200-001DD847D7F4
IP Address: 192.168.1.2
Interface GUID: {d8f53a92-8e85-4d1e-bde0-ba30d9b14449}
NHED type: X02
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>573</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:36.095870300Z" />
    <EventRecordID>425</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="15608" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="ID">uuid:10000000-0000-0000-0200-001DD847D7F4</Data>
    <Data Name="Address">192.168.1.2</Data>
    <Data Name="GUID">{d8f53a92-8e85-4d1e-bde0-ba30d9b14449}</Data>
    <Data Name="NhedType">X02</Data>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:35 PM
Event ID:      581
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Setup has determined that the Windows Firewall is enabled in the Home profile.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>581</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:35.555869500Z" />
    <EventRecordID>424</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="14828" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
</EventData>
</Event>
Log Name:      Media Center
Source:        Microsoft-Windows-Media Center Extender
Date:          12/10/2010 9:48:35 PM
Event ID:      575
Task Category: Configuration
Level:         Information
Keywords:
User:          Eric-PC\Eric
Computer:      Eric-PC
Description:
Media Center Extender Setup started with the following settings:
Affiliation code: 159
Username: Eric
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-Media Center Extender" Guid="{7B7838A3-6562-4269-BB7A-97B0D9593882}" />
    <EventID>575</EventID>
    <Version>0</Version>
    <Level>4</Level>
    <Task>4</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-11T02:48:35.485869400Z" />
    <EventRecordID>423</EventRecordID>
    <Correlation />
    <Execution ProcessID="16004" ThreadID="14828" />
    <Channel>Media Center</Channel>
    <Computer>Eric-PC</Computer>
    <Security UserID="S-1-5-21-3026407376-1936420717-4019103078-1001" />
</System>
<EventData>
    <Data Name="AffCode">159</Data>
    <Data Name="User">Eric</Data>
</EventData>
</Event>

Windows XP Media Center Edition does not suport ipod nano...need programs

I was just informed by Apple Service that Windows XP Media Center does not support ipod nano, but that there are online programs available that would allow me to use my ipod with Windows XP Media Center. Does anyone know of these porgrams?? If so, could you recommend a website? Thanks!

was just informed by Apple Service that Windows XP Media Center does not support ipod nano
Correct. Sort of.
Windows Media Center is not a computer. Just as Mac OS is not a computer. It is a operating system. (a version of Windows XP).
You have a PC with Windows XP Media Center.
You cannot use Windows Media Center OS to load the iPod.
You need to load iTunes to manage the iPod.
And yes, you can use the iPod Nano on Windows XP Media Center.
See here -> iPod: System Requirements

A700 blue screen of death when performing Live TV Search in Windows Media Center

I just got my new Lenovo IdeaCenter A700 today and have been busy setting it up. I was trying to set up the TV on it, and used Windows Media Center. I plugged the tv cable in to the back of the computer and selected "live tv setup". I then put in my zipcode and it was downloading some things and then came up with a blue screen. When the computer restarted the information below was the MS error message. I have attached the files mentioned in the log. This happened to me twice.
Hope you can help.
Please let me know if you need anymore information.
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7600.2.0.0.768.3
Locale ID:   1033
Additional information about the problem:
BCCode:   4a
BCP1:   0000000076E5FF2A
BCP2:   0000000000000002
BCP3:   0000000000000000
BCP4:   FFFFF8800AADECA0
OS Version:   6_1_7600
Service Pack:   0_0
Product:   768_1
Files that help describe the problem:
C:\Windows\Minidump\102110-15849-01.dmp
C:\Users\fennis\AppData\Local\Temp\WER-36941-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt

Update Windows and all drivers, download newest video driver from AMD website, you have some software issue.

Using as Media Center.....what keyboard?

Similar Messages

Maybe you are looking for