Using asio4all with audigy 4 and i need to reduce to 44khz, tha

greetings! i'm using adobe audition 2 with an audigy 4 soundcard. i have to a 2.53ghz intel celron, 52mb of ram, edirol um- usb midi interface windows xp sp2, 2 hard dri'ves with 300gb.
My problem is when recording in Audition 2, i'll record say a piano and track 2 and when i click play the piano plays not even a second offbeat with the drums. it's barely off beat but it is off time. Also say with track 2 armed i hear a loud echo (no efx are running) so i press mute to get rid of the echo when recording----by the way when i click play it doesn't record the echo. After making a post on auditions forums the guy told me the problem isn't what i assumed it was (latency) he says the problem appears to be i need to adjust my settings to 44. but another guy said Audigy doesn't allow anything except 48khz? is there anyway around this? thanks
here r the current settings.
Asio Buffer size 52 samples
latency compensation 32 samples in and out
use hardware buffer is not checked
resample 44 to 48khz

You cannot.
Forgot or Wrong Passcode
http://support.apple.com/kb/HT1212

Similar Messages

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my ipad is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

I have a new ipad which needs itunes 10.7 or later to download my music onto it... but my apple laptop is not compatible with this as it is too old... can i use itunes with this ipad and apple laptop?

To use itunes 10.7 you need to have Snow Leopard operating system installed
These are the system requirements
System Requirements:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
If you can run Snow Leopard you need to purchase it
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

How can I use LCCS with ActionScript 3 and Flash CS4?

Hi,
Using Stratus I was able to create an an application using Action Script 3 and Flash CS4. The sample code on the Adobe site was quite straight forward and easy to understand. I now want to switch over to LCCS but can't find anything any where on how to use Action Script 3 and Flash CS4 with LCCS. Do I need to know Flex to be able to use LCCS? Everything was quite simple and easy to understand with Stratus and makes complete sense. But LCCS is really confusing. Is there any sample code on how to establish a connection in Action Script 3 and then stream from a webcam to a client. There is nothing in the LCCS SDK that covers Flash and Action Script 3. Please help! I found the link below on some forum but it takes me nowhere.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=75 9&threadid=1407833&enterthread=y

Thanks Arun!
Date: Thu, 29 Apr 2010 11:44:10 -0600
From: [email protected]
To: [email protected]
Subject: How can I use LCCS with ActionScript 3 and Flash CS4?
Hi,
Welcome to the LCCS world.
Please refer to the SDK's sampleApps folder. There would be an app called FlashUserList. The app demonstrates how LCCS can be used with Flash CS4. Its a pretty basic app, but should help you moving.
We are trying to improve our efforts to help developers in understanding our samples. Please do let us know if we can add something that would help others.
Thanks
Arun
>

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help.

10.9.1 used terminal with rm-rf and deleted my user data. Can I get back the deleted data? Help. I really just need mail file and desktop files recovered.

If data were on the SSD drive with TRIM - practically no chance. If HDD - use DIY recovery software such as DiskDrill or DataResue.
As quickly as possible turn off the drive where deleted data.
Use an external HDD with installed OSX for data recovery.
Alex
Apple Certified Support Professional

Lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

Ost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

i have lost my phone. reset my icloud password, now its asking me to sign in from the phone before i could use it on the web, and i need to access my icloud account from the web. what shall i do ?

Welcome to the Apple community.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

I am trying to use livetype with persian alphabet and it doesn't work. what should I do?

There is no more LiveType with Motion 5. You may want to go to the Final Cut Express forum, as that's the only place it's existed for the last few years.

I am locked out of my iPad, I can't back it up because it won't connect to iTunes (because it's locked with a password) and I need it for school, it has all of my school work on it and the school doesn't have or passwords. PLEASE HELP ME!!!

I am locked out of my iPad 2, I can't back it up because it won't connect to iTunes (because it's locked with a password) and I need it for school, it has all of my school work on it and the school doesn't have or passwords. I can't loose all of my work. PLEASE HELP ME!!!

Hi ebby,
Here are the instructions for a disabled device - hopefully you have sync'd with your computer before now?
http://support.apple.com/kb/HT1212
Good luck!
Cheers,
GB

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

Using Icloud with Outlook 2007 and windows 7, I cannot get my calendar to list the scheduled appointments as it used to do before I cloud. The to do bar just shows no upcoming appointments when my calendar is filled with them. How do I fix this

Since using ICloud with Office 2007 and Windows 7, the to-do-list will not show any appointments. If has the notation that no appointments are available? My calendar is full of appointments. How do I correct this?

I don't have a password on my phone. After attaching the phone to the Windows 7 computer, my DCIM folder is always empty. Here's the solution: While the phone is plugged in to the computer, pick it up and select the Photos application. A dialog box appears and asks if you trust this computer. Obviously, select the "Trust" option. Then the photos will download. If you have a password on your phone, I'm guessing you have to enter it before you open the photo application.

My iphone says 'iphone is disabled connect to itunes' and when i do connect it, it says 'iphone could not connect to itunes because it is locked with a password and you need to unlock it but it doesnt let me as it is diabled???????

my iphone says 'iphone is disabled connect to itunes' and when i do connect it, it says 'iphone could not connect to itunes because it is locked with a password and you need to unlock it but it doesnt let me as it is diabled???????

hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks

I am using Firefox with OS X and suddenly I lost the slot in which I type URL's in the top of the browser. How can I get it back?

I am using FIREFOX with OS X and suddenly I lost the slot at the top of the browswer in which to type the URL's. It just disappeared.
How can I get it back?

View --> Toolbars --> Navigation Toolbar

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. Did you saw this problem?

Hello! I'm using Aperture with Efex plugins and notice, what when I saving result in plugin and go back to aperture, preview mode is going to grey color and not working until I reboot Aperture. What is intresting - in full screen mode everything works fine. Did you saw this problem?

It seems there's a workaround here:
https://discussions.apple.com/thread/5566037?tstart=0

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

I have a new I Pad air and I am trying to use it with a projector and a whiteboard, unfortunately the two are not connecting. Can anyone give me reasons why this might be happening.

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108
 Cheers, Tom

Using asio4all with audigy 4 and i need to reduce to 44khz, tha

Similar Messages

Maybe you are looking for