Using AT&T prepaid nano sim card on unlocked and sim free iPhone 6
I'm currently a Boost Mobile customer and planing to get a unlocked and sim free iPhone 6 (model:A1586). If I buy AT&T prepaid nano sim card, will this work? How do I activate the sim card with keeping my current phone number?
It should work, You are going to have to contact AT&T and have the number ported to your AT&T gophone account.
Similar Messages
-
If I buy an unlocked and contract-free iPhone 4s for my T-mobile sim, do i need to cut my sim.
Beyond what had been said about unlocked phones and limitations of iPhones on the T-Mobile network, T-Mobile appears to sell microSIMs:
http://www.t-mobile.com/shop/phones/cell-phone-detail.aspx?cell-phone=t-mobile-m icro-sim-card
I am not a T-Mobile customer so best to call them and ask. -
I'm interested in iPhone 5s Unlocked and contract-free T-Mobile. It will work in Russia, with Russian nano-SIM card GSM?
Depends on what you mean by "fully operational". As i"ve stated, the phone most likely will not support LTE where you live, & unless you're using a supported iPhone carrier, you'll have to fiddle with the APN settings.
But, an unlocked GSM iPhone will work with any GSM carrier. -
I am using iphone 4 and planning to visit india for few months. can i buy local sim card from india and use in my iphone? i have alrady unlock my iphone.
Of course
-
Can i purchase a sim card when abroad and use in my iphone to get better coverage
can i purchase a sim card when abroad and use in my iphone to get better coverage
Only if your iPhone is unlocked.
-
If I get my iphone unlocked can I buy a sim card in Spain and then use it there and get free 3g access
No. You can't activate any iPhone without a sim card installed. The sim card itself need not be activated, but it must be valid & present. Since you updated the software, the phone requires re-activation, thus you need a sim card. You can borrow one from someone, but bottom line, you need a sim card.
-
Nano Sim Card Tray Slot Holder Black (For iPhone 5)
Where can I buy apple oem Nano SIM card tray slot holder black for Iphone 5?
Try eBay. Apple does not sell parts.
-
Good afternoon! I addressed in the AT&T company with a question about untying of a sim card of AT&T from my iPhone, all of them made Iphone now is unlocked, I executed all points which were written:
To complete the unlock, simply
1 . Open iTunes on your Mac or PC and verify that you have Internet connectivity.
2 . Ensure a SIM card is inserted into your iPhone.
3 . Connect your iPhone using the dock connector to USB cable that came with your iPhone.
4 . Backup and restore your iPhone using iTunes. For information on backup and restore, please visit http://support.apple.com/kb/HT1414.
5 . After restoring, your iPhone will be unlocked.
Additional information on unlocking can be found at http://support.apple.com/kb/TS3198
I made everything as well as was written, but on completion of the ios 6.1.3 installation the iPhone asks to be activated through wifi or through a wire to the computer.
I connected Iphone to the computer and the text takes off: (Were sorry, we are unable to continue with your activation at this time. Please TR again later, or contact customer care! )
how to me to activate my iPhone?
I hope for your help....Hey APPLELovestory,
We have an article that goes over troubleshooting iPhone activation issues here:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
Perform the following steps:
Restart the iPhone.
Try another means of reaching the activation server and attempt to activate.
Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
Try connecting to iTunes if you're unable to activate using Wi-Fi.
Restore the iPhone.
If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Apple for assistance.
Hope that helps,
David -
How can I get a sim card for Japan and will it work with my locked Iphone 6
How can I get a sim card for Japan and will it work with my locked Iphone 6
You cannot use a SIM card on a carrier locaked phone, other than a sim from the carrier the phone is locked to. You must first get the carrier it is locked to, to unlock your phone. Apple does not unlock phones.
-
How can i get iphone 4s sim card offically unlocked?*
how can i get iphone 4s sim card offically unlocked?*
You don't get a SIM card unlocked, your iPhone has to be unlocked to use any SIM card. Contact your carrier and ask if they will unlock your iPhone.
-
i bought an factory unlocked iphone 3gs at the apple store today and just ordered a sim card activation kit and a 30 dollar minute card for it. the sim will work in the unlocked iphone am i correct? and i can use messaging on it right?
If T-Mobile in the US, while your phone will activate/work, you won't have FaceTime, MMS or 3G. T-Mobile, in the US, is not a supported iPhone carrier, thus all features of the iPhone may not be available. T-Mobile's 3G network, in the US, is not compatible with the iPhone.
-
Why does the iphone 5c come with a sim card taker outer and the iphone 5s does not come with one
why does the iphone 5c come with a sim card taker outer and the iphone 5s does not come with one
Good question... Lol, I've noticed that iPads do too... I just use a bent paperclip works like a charm.
-
No sim card, no signal and showing 3g and going again to no service
bought my iPhone 5 the day it came out, from saudi arabia and every since then i have issues witht the connection, it keeps switching to no sim card or no service, and half the time showing no network from two operators( MOBILY network & JAIN network)
I have powered my phone off
no sim card, no signal and showing 3g and going again to no service
tried with out wifi
reset all setting
reset all network setting
what is the solution for above questions....................Chiming in from the US, it seems that a lot more of us are having this issue as well lately. My iPad has worked well under 3 OSs and I have never seen that NO SIM message until this week. I am running iOS 5 since it was released, but have not yet upgraded to iOS 5.0.1, and all of a sudden, I see that NO SIM message pretty much all the time.
I have never removed my SIM or had any trouble with 3G before this week. It's not a big problem for me since I don't use it very often at all - not even on a data plan now - but it's annoying and not what I paid for. And if it happens to my wife, she'll be in trouble.
Apple folks, has there been any official acknoeldgement for this issue, and has it been properly elevated so it will be addressed? There are quite a few threads on this out there. -
How do I get an iPad micro sim card for Austria and Italy? We purchased one for Germany, but it doesn't cover in Austria or Italy
Compare the roaming charges from the German carrier with services like those:
http://www.abroadband.com
http://www.maxroam.com/Shop/Product/Detail.aspx?ProductId=787&cur=EUR
Otherwise buy a pre-paid micro-SIM card for the iPad in each country you visit. -
HT1688 How do I get an old SIM card to reactivate in my new iPhone?
How do I get an old micro SIM card reactivated?
Contact the carrier that sim card belongs to and request service.
Maybe you are looking for
-
I thought I had at least a basic understanding of both CAF and MIDI loops in Jam Packs, but then I started looking closer and am totally confused. If I drag a MIDI loop into Logic, I see what I would expect, a MIDI file and a generator. If I look tha
-
How do I install OS X Mavericks on a Macbook that wont even start up?
I got on it this morning, it booted up fine. Then stopped responding. So I turned it off, and turned it back on. It refused to open the operating system. Just kinda sat there with the Apple logo and the spinny 'loading' wheel. I ended up in Online In
-
Relationship A/B003 between WA and Position
Dear experts, I'd like to understand what is happening when I create a relationship between a position and a work area. After I create this relationship, the existing relationship A/B003 with the Org. Unit is deleted and replaced by the one between W
-
I just downloaded some new drum sounds on Logic Pro X that were offered upgrades and now I get an error message in my regular work that states, "Cannot open source file" when I go to import an mp3 large file into any template or new project. I've tr
-
Can't open my personal folder in Bridge
In the "favorite"-window, I can choose pictures of my personal-folder. But I have no chances to choose subfolders of it; neither in the "Favorite"-window nor in the "folder"-window. When I choose the "desktop", I get a lock-sign at my personal-folder